Your message dated Thu, 20 Feb 2025 12:11:39 +0100 (CET) with message-id <20250220111139.0466abe2...@eldamar.lan> and subject line Closing this bug (BTS maintenance for src:linux bugs) has caused the Debian Bug report #895378, regarding sky2: sky2: did not recover correctly after waking up from S3 to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 895378: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=895378 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
--- Begin Message ---Package: src:linux Version: 4.15.11-1 Severity: normal File: sky2 Dear Maintainer, * What led up to the situation? I started up my PC and didn't do anything. The system went into S3. After I woke it up, all worked, except networking. * What exactly did you do (or not do) that was effective (or ineffective)? The system told me that the cable was unplugged, but it wasn't. After I remember the system woke up from S3, I removed the sky2 module and modprobed it again. After that, networking started to work again immediately. * What was the outcome of this action? * What outcome did you expect instead? I expected that networking would just work after waking up from S3. Here's the sky2 story: Boot: [ 0.961316] sky2: driver version 1.30 [ 0.961442] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3 [ 0.966930] sky2 0000:02:00.0 eth0: addr 00:22:15:0f:99:ab [ 7.370976] sky2 0000:02:00.0 eth0: enabling interface [ 9.036080] sky2 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex, flow control both Auto-suspend to S3 due to inactivity: [ 1214.668015] sky2 0000:02:00.0 eth0: disabling interface Waking up: [ 1219.713183] sky2 0000:02:00.0 eth0: enabling interface That's all. No message that the link is up. In fact: [ 1219.716325] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Me, trying to recover by rmmod and modprobing: [ 6711.523687] sky2 0000:02:00.0 eth0: disabling interface [ 6714.918429] sky2: driver version 1.30 [ 6714.918573] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3 [ 6714.919025] sky2 0000:02:00.0 eth0: addr 00:22:15:0f:99:ab [ 6714.939691] sky2 0000:02:00.0 eth0: enabling interface [ 6716.623117] sky2 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex, flow control both -- Package-specific info: ** Version: Linux version 4.15.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-12)) #1 SMP Debian 4.15.11-1 (2018-03-20) ** Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-2-amd64 root=UUID=8efc387d-cdc0-496d-8f3c-03cc7f4ac8a5 ro quiet ** Tainted: PO (4097) * Proprietary module has been loaded. * Out-of-tree module has been loaded. ** Kernel log: [ 1216.216183] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 1216.223242] cache: parent cpu1 should not be sleeping [ 1216.223320] microcode: sig=0x10677, pf=0x10, revision=0x703 [ 1216.227607] microcode: updated to revision 0x70a, date = 2010-09-29 [ 1216.227817] CPU1 is up [ 1216.227846] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 1216.230620] cache: parent cpu2 should not be sleeping [ 1216.235237] CPU2 is up [ 1216.235255] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 1216.238015] cache: parent cpu3 should not be sleeping [ 1216.242645] CPU3 is up [ 1216.247339] ACPI: Waking up from system sleep state S3 [ 1216.405572] usb usb3: root hub lost power or was reset [ 1216.405591] usb usb4: root hub lost power or was reset [ 1216.405627] usb usb5: root hub lost power or was reset [ 1216.405688] usb usb6: root hub lost power or was reset [ 1216.405734] usb usb7: root hub lost power or was reset [ 1216.405760] usb usb8: root hub lost power or was reset [ 1216.405818] rtc_cmos 00:01: Alarms can be up to one month in the future [ 1216.406434] serial 00:06: activated [ 1216.417931] sd 2:0:0:0: [sda] Starting disk [ 1216.424886] sd 5:0:0:0: [sdf] Starting disk [ 1216.760886] usb 3-1: reset full-speed USB device number 2 using uhci_hcd [ 1216.787119] ata5: SATA link down (SStatus 0 SControl 300) [ 1216.787136] ata2: SATA link down (SStatus 0 SControl 300) [ 1216.908871] usb 8-2: reset low-speed USB device number 3 using uhci_hcd [ 1216.948872] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1216.948885] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1216.949120] ata6.00: supports DRM functions and may not be fully accessible [ 1216.953581] ata6.00: supports DRM functions and may not be fully accessible [ 1216.958405] ata6.00: configured for UDMA/133 [ 1216.958457] ata6.00: Enabling discard_zeroes_data [ 1217.001936] ata4.00: configured for UDMA/100 [ 1217.172872] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1217.175606] ata1.00: configured for UDMA/66 [ 1217.476878] usb 8-1: reset low-speed USB device number 2 using uhci_hcd [ 1219.548864] floppy driver state [ 1219.548864] ------------------- [ 1219.548871] now=4295197184 last interrupt=4294892540 diff=304644 last called handler=reset_interrupt [floppy] [ 1219.548872] timeout_message=lock fdc [ 1219.548872] last output bytes: [ 1219.548873] 8 80 4294892535 [ 1219.548874] 8 80 4294892535 [ 1219.548875] 8 90 4294892535 [ 1219.548875] 8 80 4294892539 [ 1219.548876] 8 90 4294892539 [ 1219.548877] 8 80 4294892539 [ 1219.548877] 8 90 4294892539 [ 1219.548878] e 80 4294892539 [ 1219.548879] 13 90 4294892539 [ 1219.548879] 0 90 4294892539 [ 1219.548880] 1a 90 4294892539 [ 1219.548881] 0 90 4294892539 [ 1219.548881] 12 90 4294892539 [ 1219.548882] 0 90 4294892539 [ 1219.548883] 14 90 4294892539 [ 1219.548883] 18 80 4294892539 [ 1219.548884] 8 80 4294892540 [ 1219.548885] 8 80 4294892540 [ 1219.548885] 8 80 4294892540 [ 1219.548886] 8 80 4294892540 [ 1219.548886] last result at 4294892540 [ 1219.548887] last redo_fd_request at 4294892540 [ 1219.548892] status=40 [ 1219.548893] fdc_busy=1 [ 1219.548895] do_floppy=reset_interrupt [floppy] [ 1219.548896] cont=00000000d75a95ee [ 1219.548897] current_req= (null) [ 1219.548898] command_status=-1 [ 1219.548901] floppy0: floppy timeout called [ 1219.549332] OOM killer enabled. [ 1219.549333] Restarting tasks ... done. [ 1219.556414] PM: suspend exit [ 1219.710000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1219.713183] sky2 0000:02:00.0 eth0: enabling interface [ 1219.716325] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1221.377088] do_IRQ: 3.34 No irq handler for vector [ 1225.592860] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1225.605597] ata3.00: configured for UDMA/133 [ 1238.560405] fuse init (API version 7.26) [ 1243.635426] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 1243.802618] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 1243.810974] ISO 9660 Extensions: IEEE_1282 [ 1269.638502] rhythmbox: sending ioctl 2285 to a partition! [ 1269.63 ** Model information 8528] rhythmbox: sending ioctl 2285 to a partition! [ 4340.834017] usb 1-5: reset high-speed USB device number 3 using ehci-pci [ 4506.721659] usb 1-5: reset high-speed USB device number 3 using ehci-pci [ 5758.046909] usb 1-5: reset high-speed USB device number 3 using ehci-pci [ 6711.523687] sky2 0000:02:00.0 eth0: disabling interface [ 6714.918429] sky2: driver version 1.30 [ 6714.918573] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3 [ 6714.919025] sky2 0000:02:00.0 eth0: addr 00:22:15:0f:99:ab [ 6714.936663] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6714.939691] sky2 0000:02:00.0 eth0: enabling interface [ 6714.940025] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6716.623117] sky2 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 6716.623700] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 6934.060214] perf: interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 sys_vendor: System manufacturer product_name: P5Q-E product_version: System Version chassis_vendor: Chassis Manufacture chassis_version: Chassis Version bios_vendor: American Megatrends Inc. bios_version: 0803 board_vendor: ASUSTeK Computer INC. board_name: P5Q-E board_version: Rev 1.xx ** Loaded modules: sky2 nls_utf8 isofs udf crc_itu_t fuse xt_recent ipt_REJECT nf_reject_ipv4 xt_comment xt_multiport xt_conntrack xt_hashlimit xt_addrtype xt_mark iptable_mangle iptable_nat nf_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 xt_tcpudp xt_CT iptable_raw xt_NFLOG nfnetlink_log nf_log_ipv4 nf_log_common xt_LOG nf_conntrack_sane nf_conntrack_netlink nfnetlink nf_nat_tftp nf_nat_snmp_basic nf_conntrack_snmp nf_nat_sip nf_nat_pptp nf_nat_proto_gre nf_nat_irc nf_nat_h323 nf_nat_ftp nf_nat_amanda nf_nat nf_conntrack_tftp nf_conntrack_sip nf_conntrack_pptp nf_conntrack_proto_gre nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_irc nf_conntrack_h323 nf_conntrack_ftp ts_kmp nf_conntrack_amanda nf_conntrack libcrc32c iptable_filter snd_hrtimer snd_seq snd_seq_device binfmt_misc snd_hda_codec_analog snd_hda_codec_generic iTCO_wdt iTCO_vendor_support coretemp kvm_intel snd_hda_intel kvm irqbypass evdev joydev snd_hda_codec snd_hda_core pcspkr snd_hwdep serio_raw snd_pcm snd_timer sg snd lpc_ich mfd_core soundcore shpchp asus_atk0110 button acpi_cpufreq nvidia(PO) drm parport_pc ppdev lp parport ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb crypto_simd cryptd glue_helper aes_x86_64 sr_mod cdrom hid_logitech ff_memless sd_mod hid_generic uas usb_storage usbhid hid ahci libahci libata scsi_mod uhci_hcd ehci_pci ehci_hcd psmouse i2c_i801 usbcore usb_common floppy ** Network interface configuration: source /etc/network/interfaces.d/* auto lo iface lo inet loopback allow-hotplug eth0 iface usb0 inet dhcp ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:22:15:0f:99:ab brd ff:ff:ff:ff:ff:ff inet 192.168.0.2/29 brd 192.168.0.7 scope global noprefixroute eth0 valid_lft forever preferred_lft forever inet6 fe80::222:15ff:fe0f:99ab/64 scope link noprefixroute valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed eth0: 1730871 2143 0 0 0 0 0 143 334003 1843 0 0 0 0 0 0 lo: 1190395 14972 0 0 0 0 0 0 1190395 14972 0 0 0 0 0 0 *** Protocol statistics: Ip: Forwarding: 2 17641 total packets received 0 forwarded 0 incoming packets discarded 17228 incoming packets delivered 17110 requests sent out 3632 outgoing packets dropped 4 dropped because of missing route Icmp: 7280 ICMP messages received 0 input ICMP message failed ICMP input histogram: destination unreachable: 7280 7280 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 7280 IcmpMsg: InType3: 7280 OutType3: 7280 Tcp: 115 active connection openings 71 passive connection openings 7 failed connection attempts 1 connection resets received 3 connections established 2366 segments received 2205 segments sent out 44 segments retransmitted 0 bad segments received 11 resets sent Udp: 400 packets received 7280 packets to unknown port received 0 packet receive errors 7675 packets sent 0 receive buffer errors 0 send buffer errors IgnoredMulti: 4 UdpLite: TcpExt: 91 TCP sockets finished time wait in fast timer 9 delayed acks sent Quick ack mode was activated 2 times 1212 packet headers predicted 461 acknowledgments not containing data payload received 109 predicted acknowledgments Detected reordering 1 times using SACK TCPTimeouts: 36 TCPLossProbes: 2 TCPLossProbeRecovery: 1 TCPDSACKOldSent: 2 3 connections reset due to unexpected data 1 connections reset due to early user close TCPSackShiftFallback: 1 TCPDeferAcceptDrop: 8 TCPRcvCoalesce: 201 TCPOFOQueue: 10 TCPSynRetrans: 42 TCPOrigDataSent: 831 IpExt: InMcastPkts: 436 OutMcastPkts: 132 InBcastPkts: 96 OutBcastPkts: 94 InOctets: 2984989 OutOctets: 1584173 InMcastOctets: 95234 OutMcastOctets: 29812 InBcastOctets: 13708 OutBcastOctets: 12556 InNoECTPkts: 17685 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 02) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d3] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e21] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fa000000-feafffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at c800 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at c880 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at cc00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at f9fffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:8311] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 26 Region 0: Memory at f9ff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: f0000000-f03fffff Prefetchable memory behind bridge: 00000000f8f00000-00000000f8ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 16 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at c080 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at c400 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at c480 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f9fff800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller [8086:3a22] (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 25 Region 0: I/O ports at bc00 [size=8] Region 1: I/O ports at b880 [size=4] Region 2: I/O ports at b800 [size=8] Region 3: I/O ports at b480 [size=4] Region 4: I/O ports at b400 [size=32] Region 5: Memory at f9ffe800 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f9fff400 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0400 [size=32] Kernel modules: i2c_i801 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G94 [GeForce 9600 GT] [10de:0622] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd GV-NX96T512HP [1458:3481] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 27 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at dc00 [size=128] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia 02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12) Subsystem: ASUSTeK Computer Inc. Motherboard [1043:81f8] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 24 Region 0: Memory at febfc000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at e800 [size=256] Expansion ROM at febc0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: sky2 Kernel modules: sky2 ** USB devices: Bus 002 Device 004: ID 046d:c05b Logitech, Inc. M-U0004 810-001317 [B110 Optical USB Mouse] Bus 002 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 003: ID 046d:c218 Logitech, Inc. Logitech RumblePad 2 USB Bus 008 Device 002: ID 046d:c30e Logitech, Inc. UltraX Keyboard (Y-BL49) Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 163f:1611 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 04a9:220d Canon, Inc. CanoScan N670U/N676U/LiDE 20 Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.15.0-2-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-4.15.0-2-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.130 ii kmod 25-1 ii linux-base 4.5 Versions of packages linux-image-4.15.0-2-amd64 recommends: ii apparmor 2.12-4 ii firmware-linux-free 3.4 ii irqbalance 1.3.0-0.1 Versions of packages linux-image-4.15.0-2-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02+dfsg1-4 pn linux-doc-4.15 <none> Versions of packages linux-image-4.15.0-2-amd64 is related to: ii firmware-amd-graphics 20170823-1 pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux-nonfree 20170823-1 ii firmware-misc-nonfree 20170823-1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
--- End Message ---
--- Begin Message ---Hi This bug was filed for a very old kernel or the bug is old itself without resolution. If you can reproduce it with - the current version in unstable/testing - the latest kernel from backports please reopen the bug, see https://www.debian.org/Bugs/server-control for details. Regards, Salvatore
--- End Message ---
