Package: initramfs-tools
Version: 0.42
Severity: normal
I gave initramfs-tools a new try on my alpha, but it failed to create
a working initrd:
SCSI subsystem initialized
qla1280: QLA1040 found on PCI bus 1, dev 8
scsi(0:0): Resetting SCSI BUS
scsi0 : QLogic QLA1040 PCI to SCSI Host Adapter
Firmware version: 7.65.06, Driver version 3.25
Vendor: MICROP Model: 3391WS Rev: X502
Type: Direct-Access ANSI SCSI revision: 02
scsi(0:0:0:0): Sync: period 10, offset 12, Wide
SCSI device sda: 17780058 512-byte hdwr sectors (9103 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 17780058 512-byte hdwr sectors (9103 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Kernel panic - not syncing: Attempted to kill init!
The qla1280 module is the right one for my rootfilesystem, the ext3
module is also loaded.
Using break=mount:
SCSI subsystem initialized
qla1280: QLA1040 found on PCI bus 1, dev 8
scsi(0:0): Resetting SCSI BUS
scsi0 : QLogic QLA1040 PCI to SCSI Host Adapter
Firmware version: 7.65.06, Driver version 3.25
Vendor: MICROP Model: 3391WS Rev: X502
Type: Direct-Access ANSI SCSI revision: 02
scsi(0:0:0:0): Sync: period 10, offset 12, Wide
SCSI device sda: 17780058 512-byte hdwr sectors (9103 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 17780058 512-byte hdwr sectors (9103 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
<system hangs>
Using break=init:
SCSI subsystem initialized
qla1280: QLA1040 found on PCI bus 1, dev 8
scsi(0:0): Resetting SCSI BUS
scsi0 : QLogic QLA1040 PCI to SCSI Host Adapter
Firmware version: 7.65.06, Driver version 3.25
Vendor: MICROP Model: 3391WS Rev: X502
Type: Direct-Access ANSI SCSI revision: 02
scsi(0:0:0:0): Sync: period 10, offset 12, Wide
SCSI device sda: 17780058 512-byte hdwr sectors (9103 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 17780058 512-byte hdwr sectors (9103 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
<system hangs>
Please ask if you need more informations. I'm really interested to get
initramfs-tools working on alpha, because it's not possible to upgrade
from a running 2.4 kernel to a 2.6 kernel with yaird.
Regards, Norbert
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
