Package: src:linux
Version: 6.1.106-3
Severity: normal
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation? Changing AMD graphic/sound controller board.
Sound play back was audible but marred by constant crakcs every few seconds.
* What exactly did you do (or not do) that was effective (or
ineffective)?
Selecting kernel 6.1.0-23 instead of 6.1.0-25 at boot allows to have fine sound
playback through HDMI.
* What was the outcome of this action?
Sound works when falling back to previous versions.
* What outcome did you expect instead? Current kernel should enable correct
sound playback through HDMI.
*** End of the template - remove these template lines ***
-- Package-specific info:
** Version:
Linux version 6.1.0-25-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian
12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP
PREEMPT_DYNAMIC Debian 6.1.106-3 (2024-08-26)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-6.1.0-25-amd64
root=UUID=af3acbfd-64b1-4dcd-a313-2e76ec91e92b ro amdgpu.si_support=1
amdgpu.cik_support=1 amdgpu.dc=1 amdgpu.dpm=1
** Tainted: OE (12288)
* externally-built ("out-of-tree") module was loaded
* unsigned module was loaded
** Kernel log:
[ 7.334176] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus
number 10
[ 7.392153] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892:
line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 7.392586] e100 0000:06:05.0 enp6s5: renamed from eth0
[ 7.393293] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 7.395580] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1
(0x1b/0x0/0x0/0x0/0x0)
[ 7.396751] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 7.396952] xhci_hcd 0000:05:00.0: hcc params 0x0200e080 hci version 0x100
quirks 0x0000000010800410
[ 7.397860] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 7.399407] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 7.400089] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 7.401186] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus
number 11
[ 7.402272] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 7.403385] xhci_hcd 0000:05:00.0: Host supports USB 3.0 SuperSpeed
[ 7.404459] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 7.405649] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 6.01
[ 7.406713] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 7.407867] usb usb10: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.410168] usb usb10: Product: xHCI Host Controller
[ 7.411294] usb usb10: Manufacturer: Linux 6.1.0-25-amd64 xhci-hcd
[ 7.412418] usb usb10: SerialNumber: 0000:05:00.0
[ 7.413563] input: HDA ATI HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
[ 7.414778] input: HDA ATI HDMI HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[ 7.415984] input: HDA ATI HDMI HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
[ 7.417217] input: HDA ATI HDMI HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[ 7.417995] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 7.418427] input: HDA ATI HDMI HDMI/DP,pcm=10 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[ 7.419664] input: HDA ATI HDMI HDMI/DP,pcm=11 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[ 7.422772] SVM: TSC scaling supported
[ 7.423793] kvm: Nested Virtualization enabled
[ 7.424819] SVM: kvm: Nested Paging enabled
[ 7.425544] hub 10-0:1.0: USB hub found
[ 7.425946] SVM: LBR virtualization supported
[ 7.426831] hub 10-0:1.0: 2 ports detected
[ 7.428982] usb usb11: We don't know the algorithms for LPM for this host,
disabling LPM.
[ 7.430013] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003,
bcdDevice= 6.01
[ 7.431034] usb usb11: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.432040] usb usb11: Product: xHCI Host Controller
[ 7.433049] usb usb11: Manufacturer: Linux 6.1.0-25-amd64 xhci-hcd
[ 7.434058] usb usb11: SerialNumber: 0000:05:00.0
[ 7.435290] hub 11-0:1.0: USB hub found
[ 7.436384] hub 11-0:1.0: 2 ports detected
[ 7.442604] input: HDA ATI SB Front Mic as
/devices/pci0000:00/0000:00:14.2/sound/card0/input16
[ 7.443708] input: HDA ATI SB Rear Mic as
/devices/pci0000:00/0000:00:14.2/sound/card0/input17
[ 7.444787] input: HDA ATI SB Line as
/devices/pci0000:00/0000:00:14.2/sound/card0/input18
[ 7.446215] input: HDA ATI SB Line Out Front as
/devices/pci0000:00/0000:00:14.2/sound/card0/input19
[ 7.447363] input: HDA ATI SB Line Out Surround as
/devices/pci0000:00/0000:00:14.2/sound/card0/input20
[ 7.449519] input: HDA ATI SB Line Out CLFE as
/devices/pci0000:00/0000:00:14.2/sound/card0/input21
[ 7.450684] input: HDA ATI SB Line Out Side as
/devices/pci0000:00/0000:00:14.2/sound/card0/input22
[ 7.451971] input: HDA ATI SB Front Headphone as
/devices/pci0000:00/0000:00:14.2/sound/card0/input23
[ 7.454499] MCE: In-kernel MCE decoding enabled.
[ 7.692075] usb 10-2: new full-speed USB device number 2 using xhci_hcd
[ 7.823820] Adding 1023996k swap on /dev/sdc6. Priority:-2 extents:1
across:1023996k FS
[ 7.968365] Adding 4011000k swap on /dev/sdc3. Priority:-3 extents:1
across:4011000k FS
[ 7.985772] usb 10-2: New USB device found, idVendor=0a12, idProduct=0001,
bcdDevice=88.91
[ 7.985784] usb 10-2: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 8.052462] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 8.306745] Bluetooth: Core ver 2.22
[ 8.308022] NET: Registered PF_BLUETOOTH protocol family
[ 8.309301] Bluetooth: HCI device and connection manager initialized
[ 8.310543] Bluetooth: HCI socket layer initialized
[ 8.311780] Bluetooth: L2CAP socket layer initialized
[ 8.313039] Bluetooth: SCO socket layer initialized
[ 8.333814] usbcore: registered new interface driver btusb
[ 8.335463] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=6 rev=22bb;
LMP ver=6 subver=22bb; manufacturer=10
[ 11.288681] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Quota
mode: none.
[ 11.972041] audit: type=1400 audit(1726391670.789:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=736
comm="apparmor_parser"
[ 11.974725] audit: type=1400 audit(1726391670.789:3): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod"
pid=736 comm="apparmor_parser"
[ 11.977443] audit: type=1400 audit(1726391670.789:4): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="lsb_release" pid=735
comm="apparmor_parser"
[ 11.977446] audit: type=1400 audit(1726391670.789:5): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=739
comm="apparmor_parser"
[ 11.977449] audit: type=1400 audit(1726391670.789:6): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_filter" pid=739
comm="apparmor_parser"
[ 11.977451] audit: type=1400 audit(1726391670.789:7): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_groff" pid=739
comm="apparmor_parser"
[ 11.977742] audit: type=1400 audit(1726391670.801:8): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=738
comm="apparmor_parser"
[ 11.991450] audit: type=1400 audit(1726391670.801:9): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="ioq3ded" pid=741
comm="apparmor_parser"
[ 11.991457] audit: type=1400 audit(1726391670.801:10): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-oosplash"
pid=744 comm="apparmor_parser"
[ 11.991463] audit: type=1400 audit(1726391670.809:11): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-senddoc"
pid=745 comm="apparmor_parser"
[ 12.187909] r8169 0000:02:00.0: firmware: direct-loading firmware
rtl_nic/rtl8168f-1.fw
[ 12.189957] RTL8211E Gigabit Ethernet r8169-0-200:00: attached PHY driver
(mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
[ 12.414012] r8169 0000:02:00.0 enp2s0: Link is Down
[ 12.496587] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.497647] Bluetooth: BNEP filters: protocol multicast
[ 12.498681] Bluetooth: BNEP socket layer initialized
[ 12.501438] Bluetooth: MGMT ver 1.22
[ 12.528622] NET: Registered PF_ALG protocol family
[ 12.647876] Bluetooth: RFCOMM TTY layer initialized
[ 12.648881] Bluetooth: RFCOMM socket layer initialized
[ 12.649841] Bluetooth: RFCOMM ver 1.11
[ 12.736877] EXT4-fs (sda3): mounted filesystem with ordered data mode. Quota
mode: none.
[ 13.022512] NET: Registered PF_QIPCRTR protocol family
[ 13.040170] vboxdrv: loading out-of-tree module taints kernel.
[ 13.041649] vboxdrv: module verification failed: signature and/or required
key missing - tainting kernel
[ 13.063744] vboxdrv: Found 8 processor cores/threads
[ 13.080269] vboxdrv: TSC mode is Invariant, tentative frequency 4013607990 Hz
[ 13.081275] vboxdrv: Successfully loaded version 7.0.10 r158379 (interface
0x00330004)
[ 13.294439] VBoxNetFlt: Successfully started.
[ 13.298901] VBoxNetAdp: Successfully started.
[ 15.151832] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 15.151832] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow
control rx/tx
[ 20.119731] bridge: filtering via arp/ip/ip6tables is no longer available by
default. Update your scripts to load br_netfilter if you need this.
[ 20.121948] Bridge firewalling registered
[ 20.376233] Initializing XFRM netlink socket
** Model information
sys_vendor: To be filled by O.E.M.
product_name: To be filled by O.E.M.
product_version: To be filled by O.E.M.
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: 2501
board_vendor: ASUSTeK COMPUTER INC.
board_name: M5A99X EVO R2.0
board_version: Rev 1.xx
** Loaded modules:
xt_conntrack
nft_chain_nat
xt_MASQUERADE
nf_nat
nf_conntrack_netlink
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
xfrm_user
xfrm_algo
xt_addrtype
nft_compat
nf_tables
libcrc32c
nfnetlink
br_netfilter
bridge
stp
llc
vboxnetadp(OE)
vboxnetflt(OE)
vboxdrv(OE)
qrtr
overlay
rfcomm
cmac
algif_hash
algif_skcipher
af_alg
bnep
binfmt_misc
btusb
btrtl
btbcm
btintel
btmtk
bluetooth
jitterentropy_rng
drbg
ansi_cprng
ecdh_generic
ecc
edac_mce_amd
kvm_amd
snd_hda_codec_realtek
ccp
snd_hda_codec_generic
snd_hda_codec_hdmi
kvm
irqbypass
crc32_pclmul
ghash_clmulni_intel
sha512_ssse3
sha512_generic
sha256_ssse3
sha1_ssse3
snd_hda_intel
eeepc_wmi
snd_intel_dspcfg
asus_wmi
aesni_intel
snd_intel_sdw_acpi
battery
sp5100_tco
platform_profile
e100
sparse_keymap
snd_hda_codec
watchdog
xhci_pci
ledtrig_audio
crypto_simd
mii
rfkill
snd_hda_core
sr_mod
cryptd
xhci_hcd
i2c_piix4
cdrom
r8169
snd_hwdep
k10temp
pcspkr
fam15h_power
wmi_bmof
mxm_wmi
snd_pcm
snd_timer
realtek
mdio_devres
snd
libphy
soundcore
button
acpi_cpufreq
sg
parport_pc
ppdev
lp
parport
fuse
loop
efi_pstore
dm_mod
configfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
amdgpu
evdev
joydev
gpu_sched
drm_buddy
hid_generic
usbhid
hid
radeon
sd_mod
t10_pi
video
i2c_algo_bit
drm_ttm_helper
ttm
crc64_rocksoft
crc64
crc_t10dif
crct10dif_generic
drm_display_helper
ohci_pci
ahci
drm_kms_helper
libahci
ohci_hcd
ehci_pci
ehci_hcd
libata
drm
crct10dif_pclmul
crct10dif_common
crc32c_intel
usbcore
scsi_mod
cec
rc_core
usb_common
scsi_common
wmi
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980
Host Bridge [1002:5a14] (rev 02)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host
Bridge [1002:5a14]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI]
RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GFX port 0) [1002:5a16]
(prog-if 00 [Normal decode])
DeviceName: Onboard IGD
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI
to PCI bridge (PCI Express GFX port 0) [1002:5a14]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
NUMA node: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: e000-efff [size=4K] [16-bit]
Memory behind bridge: fea00000-feafffff [size=1M] [32-bit]
Prefetchable memory behind bridge: c0000000-d07fffff [size=264M]
[32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI]
RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 0) [1002:5a18]
(prog-if 00 [Normal decode])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI
to PCI bridge (PCI Express GPP Port 0) [1002:5a14]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
NUMA node: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: d000-dfff [size=4K] [16-bit]
Memory behind bridge: [disabled] [32-bit]
Prefetchable memory behind bridge: d0a00000-d0afffff [size=1M] [32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI]
RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 1) [1002:5a19]
(prog-if 00 [Normal decode])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI
to PCI bridge (PCI Express GPP Port 1) [1002:5a14]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
NUMA node: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: [disabled] [32-bit]
Memory behind bridge: fe900000-fe9fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI]
RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 2) [1002:5a1a]
(prog-if 00 [Normal decode])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI
to PCI bridge (PCI Express GPP Port 2) [1002:5a14]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
NUMA node: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: c000-cfff [size=4K] [16-bit]
Memory behind bridge: fe800000-fe8fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI]
RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 3) [1002:5a1b]
(prog-if 00 [Normal decode])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI
to PCI bridge (PCI Express GPP Port 3) [1002:5a14]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
NUMA node: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: [disabled] [32-bit]
Memory behind bridge: fe700000-fe7fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01
[AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. M5A99X EVO (R1.0) SB950 [1043:84dd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 19
NUMA node: 0
Region 0: I/O ports at f040 [size=8]
Region 1: I/O ports at f030 [size=4]
Region 2: I/O ports at f020 [size=8]
Region 3: I/O ports at f010 [size=4]
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at feb0b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB
OHCI0 Controller [1002:4397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
NUMA node: 0
Region 0: Memory at feb0a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB
EHCI Controller [1002:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
NUMA node: 0
Region 0: Memory at feb09000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB
OHCI0 Controller [1002:4397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
NUMA node: 0
Region 0: Memory at feb08000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB
EHCI Controller [1002:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 21
NUMA node: 0
Region 0: Memory at feb07000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus
Controller [1002:4385] (rev 42)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus
Controller [1002:4385]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4, sp5100_tco
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00
Azalia (Intel HDA) [1002:4383] (rev 40)
Subsystem: ASUSTeK Computer Inc. SBx00 Azalia (Intel HDA) [1043:84fb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC
host controller [1002:439d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
NUMA node: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to
PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
NUMA node: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=64
I/O behind bridge: b000-bfff [size=4K] [16-bit]
Memory behind bridge: fe500000-fe6fffff [size=2M] [32-bit]
Prefetchable memory behind bridge: d0900000-d09fffff [size=1M] [32-bit]
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB
OHCI2 Controller [1002:4399]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
NUMA node: 0
Region 0: Memory at feb06000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB
OHCI0 Controller [1002:4397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
NUMA node: 0
Region 0: Memory at feb05000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB
EHCI Controller [1002:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 23
NUMA node: 0
Region 0: Memory at feb04000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h
Processor Function 0 [1022:1600]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h
Processor Function 1 [1022:1601]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h
Processor Function 2 [1022:1602]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h
Processor Function 3 [1022:1603]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
Kernel driver in use: k10temp
Kernel modules: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h
Processor Function 4 [1022:1604]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Kernel driver in use: fam15h_power
Kernel modules: fam15h_power
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h
Processor Function 5 [1022:1605]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
NUMA node: 0
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Hawaii PRO [Radeon R9 290/390] [1002:67b1] (prog-if 00 [VGA
controller])
Subsystem: PC Partner Limited / Sapphire Technology Hawaii PRO [Radeon
R9 290/390] [174b:e285]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 34
NUMA node: 0
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=8M]
Region 4: I/O ports at e000 [size=256]
Region 5: Memory at fea00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon, amdgpu
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii HDMI
Audio [Radeon R9 290/290X / 390/390X] [1002:aac8]
Subsystem: PC Partner Limited / Sapphire Technology Hawaii HDMI Audio
[Radeon R9 290/290X / 390/390X] [174b:aac8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 47
NUMA node: 0
Region 0: Memory at fea60000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 09)
Subsystem: ASUSTeK Computer Inc. P8 series motherboard [1043:8505]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 35
NUMA node: 0
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at d0a04000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d0a00000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
03:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 Host
Controller [1b21:1142] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. ASM1042A USB 3.0 Host Controller
[1043:85bf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 37
NUMA node: 0
Region 0: Memory at fe900000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
04:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA
Controller [1b21:0612] (rev 01) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. ASM1061/ASM1062 Serial ATA Controller
[1043:84b7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 32
NUMA node: 0
Region 0: I/O ports at c050 [size=8]
Region 1: I/O ports at c040 [size=4]
Region 2: I/O ports at c030 [size=8]
Region 3: I/O ports at c020 [size=4]
Region 4: I/O ports at c000 [size=32]
Region 5: Memory at fe800000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
05:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 Host
Controller [1b21:1142] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. ASM1042A USB 3.0 Host Controller
[1043:85bf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
NUMA node: 0
Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
06:05.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet
Pro 100 [8086:1229] (rev 04)
Subsystem: Intel Corporation 82558B PRO/100+ PCI (TP) [8086:0009]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min, 14000ns max)
Interrupt: pin A routed to IRQ 20
NUMA node: 0
Region 0: Memory at d0900000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at b000 [size=32]
Region 2: Memory at fe600000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at fe500000 [disabled] [size=1M]
Capabilities: <access denied>
Kernel driver in use: e100
Kernel modules: e100
** USB devices:
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 046d:c328 Logitech, Inc. Corded Keyboard K280e
Bus 004 Device 002: ID 145f:026e Trust GXT 133 Gaming Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 011 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 010 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle
(HCI mode)
Bus 010 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 12.7
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500,
'oldoldstable'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 6.1.0-25-amd64 (SMP w/8 CPU threads; PREEMPT)
Kernel taint flags: TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-6.1.0-25-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.142+deb12u1
ii kmod 30+20221128-1
ii linux-base 4.9
Versions of packages linux-image-6.1.0-25-amd64 recommends:
ii apparmor 3.0.8-3
ii firmware-linux-free 20200122-1
Versions of packages linux-image-6.1.0-25-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.06-13+deb12u1
pn linux-doc-6.1 <none>
Versions of packages linux-image-6.1.0-25-amd64 is related to:
ii firmware-amd-graphics 20230210-5
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20230210-5
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20230210-5
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
