--- Begin Message ---
Package: src:linux
Version: 6.1.4-1
Severity: normal
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
did apt-get dist-upgrade
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
kernel modules fail to load
* What outcome did you expect instead?
loaded modules
*** End of the template - remove these template lines ***
-- Package-specific info:
** Version:
Linux version 6.1.0-1-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian
12.2.0-13) 12.2.0, GNU ld (GNU Binutils for Debian) 2.39.90.20221231) #1 SMP
PREEMPT_DYNAMIC Debian 6.1.4-1 (2023-01-07)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-6.1.0-1-amd64
root=UUID=3c762dd1-13f5-421a-b367-803c2b3028bb ro quiet
** Tainted: OE (12288)
* externally-built ("out-of-tree") module was loaded
* unsigned module was loaded
** Kernel log:
[ 5.646858] mc: Linux media interface: v0.10
[ 5.689167] cfg80211: Loading compiled-in X.509 certificates for regulatory
database
[ 5.689462] cfg80211: Loaded X.509 cert 'b...@debian.org:
577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 5.689733] cfg80211: Loaded X.509 cert 'romain.per...@gmail.com:
3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 5.690006] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.692460] platform regulatory.0: firmware: direct-loading firmware
regulatory.db
[ 5.694043] platform regulatory.0: firmware: direct-loading firmware
regulatory.db.p7s
[ 5.794526] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 5.794535] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 5.870107] kvm: Nested Virtualization enabled
[ 5.870112] SVM: kvm: Nested Paging enabled
[ 5.870121] SVM: LBR virtualization supported
[ 5.871624] input: HDA NVidia HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
[ 5.871770] input: HDA NVidia HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[ 5.884044] MCE: In-kernel MCE decoding enabled.
[ 5.888213] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708S:
line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
[ 5.888219] snd_hda_codec_via hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 5.888221] snd_hda_codec_via hdaudioC0D0: hp_outs=1
(0x1d/0x0/0x0/0x0/0x0)
[ 5.888223] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
[ 5.888224] snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x21
[ 5.888226] snd_hda_codec_via hdaudioC0D0: inputs:
[ 5.888227] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
[ 5.888229] snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
[ 5.888230] snd_hda_codec_via hdaudioC0D0: Line=0x1b
[ 5.899972] input: HDA ATI SB Rear Mic as
/devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 5.900042] input: HDA ATI SB Front Mic as
/devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 5.900115] input: HDA ATI SB Line as
/devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 5.900178] input: HDA ATI SB Line Out Front as
/devices/pci0000:00/0000:00:14.2/sound/card0/input15
[ 5.900239] input: HDA ATI SB Line Out Surround as
/devices/pci0000:00/0000:00:14.2/sound/card0/input16
[ 5.900314] input: HDA ATI SB Line Out CLFE as
/devices/pci0000:00/0000:00:14.2/sound/card0/input17
[ 5.900375] input: HDA ATI SB Line Out Side as
/devices/pci0000:00/0000:00:14.2/sound/card0/input18
[ 5.900434] input: HDA ATI SB Front Headphone as
/devices/pci0000:00/0000:00:14.2/sound/card0/input19
[ 5.905827] ath5k 0000:04:05.0: registered as 'phy0'
[ 6.007801] usb 6-1: Warning! Unlikely big volume range (=4096), cval->res
is probably wrong.
[ 6.007816] usb 6-1: [11] FU [Sidetone Playback Volume] ch = 1, val =
0/4096/1
[ 6.066015] usbcore: registered new interface driver snd-usb-audio
[ 6.068777] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Quota
mode: none.
[ 6.073984] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota
mode: none.
[ 6.081332] systemd-journald[276]: Received client request to flush runtime
journal.
[ 6.084964] EXT4-fs (sdd1): mounting ext2 file system using the ext4
subsystem
[ 6.091765] EXT4-fs (sdd1): mounted filesystem without journal. Quota mode:
none.
[ 6.093847] EXT4-fs (sde1): warning: maximal mount count reached, running
e2fsck is recommended
[ 6.116186] EXT4-fs (sde1): mounted filesystem with ordered data mode. Quota
mode: none.
[ 6.170439] audit: type=1400 audit(1674742016.448:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="lsb_release" pid=530
comm="apparmor_parser"
[ 6.175801] audit: type=1400 audit(1674742016.452:3): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="mariadbd_akonadi" pid=531
comm="apparmor_parser"
[ 6.178100] audit: type=1400 audit(1674742016.456:4): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="mysqld_akonadi" pid=532
comm="apparmor_parser"
[ 6.182395] audit: type=1400 audit(1674742016.460:5): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=529
comm="apparmor_parser"
[ 6.182402] audit: type=1400 audit(1674742016.460:6): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium"
pid=529 comm="apparmor_parser"
[ 6.183777] audit: type=1400 audit(1674742016.460:7): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=533
comm="apparmor_parser"
[ 6.183782] audit: type=1400 audit(1674742016.460:8): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod"
pid=533 comm="apparmor_parser"
[ 6.188693] audit: type=1400 audit(1674742016.468:9): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="postgresql_akonadi" pid=534
comm="apparmor_parser"
[ 6.196113] audit: type=1400 audit(1674742016.472:10): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/akonadiserver"
pid=536 comm="apparmor_parser"
[ 6.199719] audit: type=1400 audit(1674742016.476:11): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=535
comm="apparmor_parser"
[ 6.480483] random: crng init done
[ 6.620512] ath: EEPROM regdomain: 0x0
[ 6.620517] ath: EEPROM indicates default country code should be used
[ 6.620518] ath: doing EEPROM country->regdmn map search
[ 6.620519] ath: country maps to regdmn code: 0x3a
[ 6.620520] ath: Country alpha2 being used: US
[ 6.620521] ath: Regpair used: 0x3a
[ 6.623983] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 6.624248] ath5k: phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
[ 6.637262] ath5k 0000:04:05.0 wlp4s5: renamed from wlan0
[ 7.096871] NET: Registered PF_QIPCRTR protocol family
[ 7.194042] r8169 0000:03:00.0: firmware: direct-loading firmware
rtl_nic/rtl8168d-2.fw
[ 7.194735] RTL8211B Gigabit Ethernet r8169-0-300:00: attached PHY driver
(mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[ 7.237898] vboxdrv: loading out-of-tree module taints kernel.
[ 7.238336] vboxdrv: module verification failed: signature and/or required
key missing - tainting kernel
[ 7.253919] vboxdrv: Found 4 processor cores
[ 7.276757] vboxdrv: TSC mode is Invariant, tentative frequency 3214068538 Hz
[ 7.276764] vboxdrv: Successfully loaded version 6.1.42 r155177 (interface
0x00320000)
[ 7.371302] r8169 0000:03:00.0 enp3s0: Link is Down
[ 7.497545] VBoxNetFlt: Successfully started.
[ 7.504257] VBoxNetAdp: Successfully started.
[ 8.362995] wlp4s5: authenticate with bc:9f:e4:ca:e6:20
[ 8.363015] wlp4s5: 80 MHz not supported, disabling VHT
[ 8.367587] wlp4s5: send auth to bc:9f:e4:ca:e6:20 (try 1/3)
[ 8.368447] wlp4s5: authenticated
[ 8.372506] wlp4s5: associate with bc:9f:e4:ca:e6:20 (try 1/3)
[ 8.374101] wlp4s5: RX AssocResp from bc:9f:e4:ca:e6:20 (capab=0x1431
status=0 aid=2)
[ 8.374222] wlp4s5: associated
[ 8.408223] wlp4s5: Limiting TX power to 36 (36 - 0) dBm as advertised by
bc:9f:e4:ca:e6:20
[ 8.536738] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s5: link becomes ready
[ 13.439188] kauditd_printk_skb: 22 callbacks suppressed
[ 13.439199] audit: type=1400 audit(1674742023.716:34): apparmor="DENIED"
operation="open" profile="/usr/sbin/cups-browsed"
name="/proc/sys/net/ipv6/conf/all/disable_ipv6" pid=1035 comm="cups-browsed"
requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 24.173245] audit: type=1400 audit(1674742034.452:35): apparmor="DENIED"
operation="open" profile="mariadbd_akonadi" name="/sys/devices/system/node/"
pid=2035 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 24.260715] input: XP-PEN STYLUS as /devices/virtual/input/input20
[ 24.260966] input: XP-PEN MOUSE as /devices/virtual/input/input21
[ 24.261769] input: XP-PEN ERASER as /devices/virtual/input/input22
[ 24.455306] audit: type=1400 audit(1674742034.732:36): apparmor="DENIED"
operation="open" profile="mariadbd_akonadi" name="/sys/devices/system/node/"
pid=2080 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 24.552445] audit: type=1400 audit(1674742034.828:37): apparmor="DENIED"
operation="open" profile="mariadbd_akonadi" name="/sys/block/" pid=2080
comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 76.197178] wlp4s5: disconnect from AP bc:9f:e4:ca:e6:20 for new auth to
bc:9f:e4:bd:0e:60
[ 76.241770] wlp4s5: authenticate with bc:9f:e4:bd:0e:60
[ 76.241853] wlp4s5: 80 MHz not supported, disabling VHT
[ 76.246486] wlp4s5: send auth to bc:9f:e4:bd:0e:60 (try 1/3)
[ 76.249535] wlp4s5: authenticated
[ 76.253090] wlp4s5: associate with bc:9f:e4:bd:0e:60 (try 1/3)
[ 76.259573] wlp4s5: RX ReassocResp from bc:9f:e4:bd:0e:60 (capab=0x11
status=0 aid=1)
[ 76.259734] wlp4s5: associated
[ 76.331756] wlp4s5: Limiting TX power to 36 (36 - 0) dBm as advertised by
bc:9f:e4:bd:0e:60
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0904
board_vendor: ASUSTeK Computer INC.
board_name: M4A785TD-M EVO
board_version: Rev X.0x
** Loaded modules:
tls
uinput
snd_seq_dummy
snd_hrtimer
snd_seq
ctr
ccm
vboxnetadp(OE)
vboxnetflt(OE)
vboxdrv(OE)
qrtr
binfmt_misc
ath5k
snd_hda_codec_via
edac_mce_amd
ath
snd_hda_codec_generic
ledtrig_audio
snd_hda_codec_hdmi
kvm_amd
mac80211
snd_usb_audio
snd_hda_intel
ccp
snd_intel_dspcfg
rng_core
snd_intel_sdw_acpi
snd_usbmidi_lib
libarc4
snd_hda_codec
snd_rawmidi
kvm
snd_hda_core
snd_seq_device
cfg80211
mc
snd_hwdep
snd_pcm
irqbypass
wmi_bmof
k10temp
pcspkr
rfkill
sp5100_tco
snd_timer
snd
watchdog
soundcore
joydev
asus_atk0110
acpi_cpufreq
evdev
serio_raw
sg
msr
parport_pc
ppdev
lp
drm
parport
fuse
configfs
efi_pstore
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
hid_generic
sd_mod
t10_pi
usbhid
crc64_rocksoft
crc64
crc_t10dif
crct10dif_generic
hid
sr_mod
cdrom
crct10dif_common
ahci
ata_generic
ohci_pci
libahci
sata_promise
pata_atiixp
libata
i2c_piix4
ehci_pci
firewire_ohci
ohci_hcd
ehci_hcd
r8169
realtek
usbcore
mdio_devres
scsi_mod
firewire_core
libphy
usb_common
scsi_common
crc_itu_t
wmi
button
** Network interface configuration:
*** /etc/network/interfaces:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state
DOWN group default qlen 1000
link/ether e0:cb:4e:26:dd:de brd ff:ff:ff:ff:ff:ff
3: wlp4s5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group
default qlen 1000
link/ether 16:b7:4d:d6:b2:96 brd ff:ff:ff:ff:ff:ff permaddr
00:18:46:00:0b:23
inet 10.55.3.8/18 brd 10.55.63.255 scope global dynamic noprefixroute wlp4s5
valid_lft 540185sec preferred_lft 540185sec
inet6 fe80::4b7d:378:c6a9:7f4c/64 scope link noprefixroute
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 8868 102 0 0 0 0 0 0 8868
102 0 0 0 0 0 0
enp3s0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
wlp4s5: 550270 2293 0 0 0 0 0 0 107220
529 0 0 0 0 0 0
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] RS880 Host
Bridge [1022:9601]
Subsystem: ASUSTeK Computer Inc. M4A785-M Mainboard [1043:83a2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
NUMA node: 0
Capabilities: [c4] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=12 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
<CRCErr=0 IsocEn+ LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit
DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 3.00
Link Frequency 0: [b]
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz-
600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz-
600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE-
SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [54] HyperTransport: UnitID Clumping
Capabilities: [40] HyperTransport: Retry Mode
Capabilities: [9c] HyperTransport: #1a
Capabilities: [f8] HyperTransport: #1c
00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI
bridge (ext gfx port 0) [1022:9603] (prog-if 00 [Normal decode])
Subsystem: ASUSTeK Computer Inc. RS780 PCI to PCI bridge (ext gfx port
0) [1043:83a2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
NUMA node: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: c000-cfff [size=4K] [16-bit]
Memory behind bridge: fd000000-fe8fffff [size=25M] [32-bit]
Prefetchable memory behind bridge: f0000000-f9ffffff [size=160M]
[32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Exit
Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16
TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surprise-
Slot #2, PowerLimit 75W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet+ LinkState+
RootCap: CRSVisible+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible+
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
NROPrPrP- LTR-
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt-
EETLPPrefix-
EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp-
ARIFwd-
AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
10BitTagReq- OBFF Disabled, ARIFwd-
AtomicOpsCtl: ReqEn- EgressBlck-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB
preshoot
LnkSta2: Current De-emphasis Level: -3.5dB,
EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee04004 Data: 0021
Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. RS780 PCI to PCI
bridge (ext gfx port 0) [1043:83a2]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1
Len=010 <?>
Capabilities: [110 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI
to PCI bridge (PCIE port 3) [1022:9607] (prog-if 00 [Normal decode])
Subsystem: ASUSTeK Computer Inc. RS780/RS880 PCI to PCI bridge (PCIE
port 3) [1043:83a2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
NUMA node: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: [disabled] [32-bit]
Memory behind bridge: fe900000-fe9fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
LnkCap: Port #4, Speed 5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1
TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surprise-
Slot #7, PowerLimit 25W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet+ LinkState+
RootCap: CRSVisible+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible+
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
NROPrPrP- LTR-
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt-
EETLPPrefix-
EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp-
ARIFwd-
AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
10BitTagReq- OBFF Disabled, ARIFwd-
AtomicOpsCtl: ReqEn- EgressBlck-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB
preshoot
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-
EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee08004 Data: 0021
Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. RS780/RS880 PCI to
PCI bridge (PCIE port 3) [1043:83a2]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1
Len=010 <?>
Capabilities: [110 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pcieport
00:0a.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI
to PCI bridge (PCIE port 5) [1022:9609] (prog-if 00 [Normal decode])
Subsystem: ASUSTeK Computer Inc. RS780/RS880 PCI to PCI bridge (PCIE
port 5) [1043:83a2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
NUMA node: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: d000-dfff [size=4K] [16-bit]
Memory behind bridge: fea00000-feafffff [size=1M] [32-bit]
Prefetchable memory behind bridge: fbf00000-fbffffff [size=1M] [32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1
TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surprise-
Slot #10, PowerLimit 25W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet+ LinkState+
RootCap: CRSVisible+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible+
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
NROPrPrP- LTR-
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt-
EETLPPrefix-
EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp-
ARIFwd-
AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
10BitTagReq- OBFF Disabled, ARIFwd-
AtomicOpsCtl: ReqEn- EgressBlck-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB
preshoot
LnkSta2: Current De-emphasis Level: -3.5dB,
EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee01004 Data: 0021
Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. RS780/RS880 PCI to
PCI bridge (PCIE port 5) [1043:83a2]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1
Len=010 <?>
Capabilities: [110 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390] (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard [1043:8389]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
NUMA node: 0
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at a000 [size=4]
Region 2: I/O ports at 9000 [size=8]
Region 3: I/O ports at 8000 [size=4]
Region 4: I/O ports at 7000 [size=16]
Region 5: Memory at fcfffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] SATA HBA v1.0 InCfgSpace
Kernel driver in use: ahci
Kernel modules: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
[1043:8389]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at fcffe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:12.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB
OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. SB7x0 USB OHCI1 Controller [1043:8389]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at fcffd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 USB EHCI Controller
[1043:8389]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
NUMA node: 0
Region 0: Memory at fcfff800 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3-
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
[1043:8389]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
NUMA node: 0
Region 0: Memory at fcffc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB
OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. SB7x0 USB OHCI1 Controller [1043:8389]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
NUMA node: 0
Region 0: Memory at fcffb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 USB EHCI Controller
[1043:8389]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
NUMA node: 0
Region 0: Memory at fcfff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3-
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus
Controller [1002:4385] (rev 3c)
Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard [1043:8389]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
Kernel modules: i2c_piix4, sp5100_tco
00:14.1 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (prog-if 8a [ISA Compatibility
mode controller, supports both channels switched to PCI native mode, supports
bus mastering])
Subsystem: ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 IDE Controller
[1043:8389]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at ff00 [size=16]
Capabilities: [70] MSI: Enable- Count=1/2 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: pata_atiixp
Kernel modules: pata_atiixp, ata_generic
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00
Azalia (Intel HDA) [1002:4383]
Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard [1043:836c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at fcff4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
Subsystem: ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 LPC host controller
[1043:8389]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
NUMA node: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to
PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
NUMA node: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
I/O behind bridge: e000-efff [size=4K] [16-bit]
Memory behind bridge: feb00000-febfffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [32-bit]
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
[1043:8389]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
NUMA node: 0
Region 0: Memory at fcffa000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h
Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-
<EOCErr- DUL-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
<CRCErr=0 IsocEn+ LSEn+ ExtCTL- 64b-
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
DwFcInEn- LWO=16bit DwFcOutEn-
Revision ID: 3.00
Link Frequency: [b]
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz-
600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD-
ExtRS- UCnfE-
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h
Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h
Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h
Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: [f0] Secure device <?>
Kernel driver in use: k10temp
Kernel modules: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h
Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
NUMA node: 0
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF119 [GeForce GT
610] [10de:104a] (rev a1) (prog-if 00 [VGA controller])
Subsystem: PNY GF119 [GeForce GT 610] [196e:104a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
NUMA node: 0
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f0000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at f8000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at cc00 [size=128]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 <64us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
SlotPowerLimit 75W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit
Latency L0s <1us, L1 <4us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [128 v1] Power Budgeting <?>
Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1
Len=024 <?>
Kernel modules: nvidia
01:00.1 Audio device [0403]: NVIDIA Corporation GF119 HDMI Audio Controller
[10de:0e08] (rev a1)
Subsystem: PNY GF119 HDMI Audio Controller [196e:104a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
NUMA node: 0
Region 0: Memory at fe87c000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1
<64us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
SlotPowerLimit 75W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit
Latency L0s <1us, L1 <4us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technology Corp. IEEE 1394 Host
Controller [197b:2380] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. IEEE 1394 Host Controller [1043:8313]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
NUMA node: 0
Region 0: Memory at fe9ff800 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fe9ff400 (32-bit, non-prefetchable) [size=128]
Region 4: Memory at fe9ff000 (32-bit, non-prefetchable) [size=128]
Region 5: Memory at fe9fec00 (32-bit, non-prefetchable) [size=128]
Capabilities: [44] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME+
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
SlotPowerLimit 0W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq+ AuxPwr-
TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [94] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: fffffffc Data: 0000
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 03)
Subsystem: ASUSTeK Computer Inc. M4A785/P7P55 Motherboard [1043:83a3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
NUMA node: 0
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at fbfff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fbff8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at feaf0000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns,
L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
SlotPowerLimit 25W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
NROPrPrP- LTR-
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt-
EETLPPrefix-
EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
FRS- TPHComp- ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
10BitTagReq- OBFF Disabled,
AtomicOpsCtl: ReqEn-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB
preshoot
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-
EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [ac] MSI-X: Enable+ Count=4 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data
Not readable
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn-
ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00
Kernel driver in use: r8169
Kernel modules: r8169
04:05.0 Ethernet controller [0200]: Qualcomm Atheros AR5212/5213/2414 Wireless
Network Adapter [168c:0013] (rev 01)
Subsystem: Qualcomm Atheros EZ Connect g 802.11g 108Mbps Wireless PCI
Adapter [168c:1051]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
NUMA node: 0
Region 0: Memory at febf0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: ath5k
Kernel modules: ath5k
04:06.0 Mass storage controller [0180]: Promise Technology, Inc. PDC40718 (SATA
300 TX4) [105a:3d17] (rev 02)
Subsystem: Promise Technology, Inc. PDC40718 (SATA 300 TX4) [105a:3d17]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 72 (1000ns min, 4500ns max), Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 21
NUMA node: 0
Region 0: I/O ports at ec00 [size=128]
Region 2: I/O ports at e800 [size=256]
Region 3: Memory at febef000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at febc0000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at febb0000 [disabled] [size=32K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: sata_promise
Kernel modules: sata_promise
** USB devices:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 002: ID 046d:0a37 Logitech, Inc. USB Headset H540
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 28bd:080a XP-Pen 11.6 inch PenDisplay
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: bookworm/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 6.1.0-1-amd64 (SMP w/4 CPU threads; PREEMPT)
Kernel taint flags: TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-6.1.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.142
ii kmod 30+20221128-1
ii linux-base 4.9
Versions of packages linux-image-6.1.0-1-amd64 recommends:
ii apparmor 3.0.8-2
ii firmware-linux-free 20200122-1
Versions of packages linux-image-6.1.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.06-7
pn linux-doc-6.1 <none>
Versions of packages linux-image-6.1.0-1-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20221214-3
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20221214-3
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---
