Your message dated Sun, 21 Jul 2024 21:51:14 +0200
with message-id <5058cabd-1e12-4b7e-a59d-8a23634fd...@hoeft-online.de>
and subject line linux-image-6.9.8-amd64: Errors reported with initializing 
amdgpu that works with older kernel
has caused the Debian Bug report #1076646,
regarding linux-image-6.9.8-amd64: Errors reported with initializing amdgpu 
that works with older kernel
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)


-- 
1076646: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1076646
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 6.9.8-1
Severity: normal

Dear Maintainer,

* What led up to the situation?
Regular upgrade of trixie.

* What exactly did you do (or not do) that was effective (or ineffective)?
sudo apt full-upgrade

* What was the outcome of this action?
On boot up the kernel reports errors with initializing amdgpu. It fails after a timeout and boot up takes a very long time. Detailed logs from the systemd journal see below.

* What outcome did you expect instead?
No error messages from the kernel and normal quick boot up as given with previous kernels.


-- Package-specific info:
** Version:
Linux version 6.9.8-amd64 (debian-kernel@lists.debian.org)
(x86_64-inux-gnu-gcc-13 (Debian 13.3.0-1) 13.3.0, GNU ld (GNU Binutils
for Debian) 2.42.50.20240625) #1 SMP PREEMPT_DYNAMIC Debian 6.9.8-1
(2024-07-07)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-6.9.8-amd64 root=/dev/mapper/titan.vg-deb13 ro b43.allhwsupport=1

product_name: Aspire 5253G
product_version: V1.15
chassis_vendor: Acer
chassis_version: V1.15
bios_vendor: Acer
bios_version: V1.15
board_vendor: Acer
board_name: JE50-BZ
board_version: Base Board Version

** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex [1022:1510]
        Subsystem: Acer Incorporated [ALI] Device [1025:0520]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6310] [1002:9802] (prog-if 00 [VGA controller])
        Subsystem: Acer Incorporated [ALI] Device [1025:0521]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 27
        Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
        Region 1: I/O ports at 4000 [size=256]
        Region 2: Memory at f0400000 (32-bit, non-prefetchable) [size=256K]
        Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: radeon
        Kernel modules: radeon, amdgpu

00:01.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler HDMI Audio [1002:1314]
        Subsystem: Acer Incorporated [ALI] Device [1025:0520]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 29
        Region 0: Memory at f0444000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
        Subsystem: Acer Incorporated [ALI] Device [1025:0520]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 19
        Region 0: I/O ports at 4118 [size=8]
        Region 1: I/O ports at 4124 [size=4]
        Region 2: I/O ports at 4110 [size=8]
        Region 3: I/O ports at 4120 [size=4]
        Region 4: I/O ports at 4100 [size=16]
        Region 5: Memory at f044c000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ahci
        Kernel modules: ahci

00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
        Subsystem: Acer Incorporated [ALI] Device [1025:0520]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at f044b000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci-pci
        Kernel modules: ohci_pci

00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
        Subsystem: Acer Incorporated [ALI] Device [1025:0520]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at f044a000 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci

00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
        Subsystem: Acer Incorporated [ALI] Device [1025:0520]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at f0449000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci-pci
        Kernel modules: ohci_pci

00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
        Subsystem: Acer Incorporated [ALI] Device [1025:0520]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at f0448000 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci

00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 42)
        Subsystem: Acer Incorporated [ALI] Device [1025:0520]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Kernel driver in use: piix4_smbus
        Kernel modules: i2c_piix4, sp5100_tco

00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
        Subsystem: Acer Incorporated [ALI] Device [1025:0520]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f0440000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
        Subsystem: Acer Incorporated [ALI] Device [1025:0520]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: [disabled] [32-bit]
        Prefetchable memory behind bridge: [disabled] [32-bit]
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:15.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] (prog-if 00 [Normal decode]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:0000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 24
        Bus: primary=00, secondary=02, subordinate=05, sec-latency=0
        I/O behind bridge: 3000-3fff [size=4K] [16-bit]
        Memory behind bridge: f0300000-f03fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: f0000000-f00fffff [size=1M] [32-bit] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:15.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 2) [1002:43a2] (prog-if 00 [Normal decode]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:0000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 25
        Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
        I/O behind bridge: 2000-2fff [size=4K] [16-bit]
        Memory behind bridge: f0200000-f02fffff [size=1M] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:15.3 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 3) [1002:43a3] (prog-if 00 [Normal decode]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:0000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 26
        Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
        I/O behind bridge: [disabled] [32-bit]
        Memory behind bridge: f0100000-f01fffff [size=1M] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 [1022:1700] (rev 43) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1 [1022:1701] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2 [1022:1702] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3 [1022:1703] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>
        Kernel driver in use: k10temp
        Kernel modules: k10temp

00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4 [1022:1704] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6 [1022:1718] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5 [1022:1716] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7 [1022:1719] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

06:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0)
        Subsystem: Acer Incorporated [ALI] Device [1025:0520]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 28
        Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=256K]
        Region 2: I/O ports at 2000 [size=128]
        Capabilities: <access denied>
        Kernel driver in use: atl1c
        Kernel modules: atl1c

07:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM43225 802.11b/g/n [14e4:4357] (rev 01) Subsystem: Foxconn International, Inc. T77H103.00 Wireless Half-size Mini PCIe Card [105b:e021] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at f0100000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: bcma-pci-bridge
        Kernel modules: bcma


** USB devices:
not available


-- System Information:
Debian Release: trixie/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 6.9.8-amd64 (SMP w/2 CPU threads; PREEMPT)
Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-6.9.8-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.142
ii  kmod                                    32+20240611-1
ii  linux-base                              4.10.1

Versions of packages linux-image-6.9.8-amd64 recommends:
ii  apparmor  3.1.7-1+b1

Versions of packages linux-image-6.9.8-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  firmware-linux-free     20240610-1
ii  grub-pc                 2.12-2
pn  linux-doc-6.9           <none>

Versions of packages linux-image-6.9.8-amd64 is related to:
ii  firmware-amd-graphics     20230625-2
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
pn  firmware-misc-nonfree     <none>
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

~$ journalctl -b
--- snip ---
Jul 20 00:01:41 titan-13 kernel: Console: switching to colour frame buffer device 170x48 Jul 20 00:01:41 titan-13 kernel: radeon 0000:00:01.0: [drm] fb0: radeondrmfb frame buffer device Jul 20 00:01:41 titan-13 kernel: scsi 2:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS Jul 20 00:01:41 titan-13 kernel: sd 2:0:0:0: [sdb] Media removed, stopped polling Jul 20 00:01:41 titan-13 kernel: sd 2:0:0:0: [sdb] Attached SCSI removable disk
Jul 20 00:01:41 titan-13 kernel: [drm] amdgpu kernel modesetting enabled.
Jul 20 00:01:41 titan-13 kernel: amdgpu: Virtual CRAT table created for CPU
Jul 20 00:01:41 titan-13 kernel: amdgpu: Topology: Add CPU node
Jul 20 00:01:41 titan-13 kernel: ata1.00: exception Emask 0x0 SAct 0x7fe00007 SErr 0xc0000 action 0x6 frozen
Jul 20 00:01:41 titan-13 kernel: ata1: SError: { CommWake 10B8B }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:00:40:81:3a/00:00:07:00:00/40 tag 0 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:08:48:89:3a/00:00:07:00:00/40 tag 1 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:10:50:91:3a/00:00:07:00:00/40 tag 2 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:a8:f0:30:3a/00:00:07:00:00/40 tag 21 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:b0:f8:38:3a/00:00:07:00:00/40 tag 22 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:b8:00:41:3a/00:00:07:00:00/40 tag 23 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:c0:08:49:3a/00:00:07:00:00/40 tag 24 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:c8:10:51:3a/00:00:07:00:00/40 tag 25 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:d0:18:59:3a/00:00:07:00:00/40 tag 26 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:d8:20:61:3a/00:00:07:00:00/40 tag 27 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:e0:28:69:3a/00:00:07:00:00/40 tag 28 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:e8:30:71:3a/00:00:07:00:00/40 tag 29 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:f0:38:79:3a/00:00:07:00:00/40 tag 30 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1: hard resetting link
Jul 20 00:01:41 titan-13 kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jul 20 00:01:41 titan-13 kernel: ata1.00: configured for UDMA/133
Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0 Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0 Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0 Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0 Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0 Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0 Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0 Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0 Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0 Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0 Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0 Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0 Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0
Jul 20 00:01:41 titan-13 kernel: ata1: EH complete
Jul 20 00:01:41 titan-13 kernel: ata1.00: exception Emask 0x0 SAct 0x7fc0000f SErr 0xc0000 action 0x6 frozen
Jul 20 00:01:41 titan-13 kernel: ata1: SError: { CommWake 10B8B }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:00:58:f9:9b/00:00:08:00:00/40 tag 0 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:08:60:01:9c/00:00:08:00:00/40 tag 1 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:10:68:09:9c/00:00:08:00:00/40 tag 2 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:18:70:11:9c/00:00:08:00:00/40 tag 3 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:b0:10:b1:9b/00:00:08:00:00/40 tag 22 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:b8:18:b9:9b/00:00:08:00:00/40 tag 23 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:c0:20:c1:9b/00:00:08:00:00/40 tag 24 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:c8:28:c9:9b/00:00:08:00:00/40 tag 25 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:d0:30:d1:9b/00:00:08:00:00/40 tag 26 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:d8:38:d9:9b/00:00:08:00:00/40 tag 27 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:e0:40:e1:9b/00:00:08:00:00/40 tag 28 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:e8:48:e9:9b/00:00:08:00:00/40 tag 29 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd 60/08:f0:50:f1:9b/00:00:08:00:00/40 tag 30 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1: hard resetting link
Jul 20 00:01:41 titan-13 kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jul 20 00:01:41 titan-13 kernel: ata1.00: configured for UDMA/133
Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0 Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0 Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0 Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0 Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0 Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0 Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0 Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0 Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0 Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0 Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0 Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0 Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHS sector 0
Jul 20 00:01:41 titan-13 kernel: ata1: EH complete
Jul 20 00:01:41 titan-13 kernel: PM: Image not found (code -22)
Jul 20 00:01:41 titan-13 kernel: EXT4-fs (dm-2): mounted filesystem 3015ab46-ef45-48a3-a227-7a8e2fbc4d9d ro with ordered data mode. Quota mode: none.
--- snap ---

Attachment: OpenPGP_signature.asc
Description: OpenPGP digital signature


--- End Message ---
--- Begin Message --- My further investigations have shown that the reported bug may be a known issue with NCQ (SATA native command queueing) in particular together with older amd hardware. This is given here with the used old laptop with amdgpu.

NCQ is an extension of the Serial ATA protocol allowing hard disk drives to internally optimize the order in which received read and write commands are executed.

But why it works all the time until upgrading to kernel 6.9.8-1? With the information from https://ata.wiki.kernel.org/index.php/Libata_FAQ#Enabling.2C_disabling_and_checking_NCQ I find that the previous used kernel 6.6.15 does not show the expected information. It shows a queue_depth (cat /sys/block/sda/device/queue_depth) of 32. That is an ambiguous value as noted in the info. I assume that NCQ isn't enabled due to this value and the kernel runs without the reported error messages.

NCQ is correct enabled when using kernel 6.9.8-1 and triggers the error messages in conjunction with amdgpu on old hardware. But there is a kernel boot option "libata.force=noncq" to disable it (https://docs.kernel.org/admin-guide/kernel-parameters.html).

With the following entry in '/etc/default/grub' boot up will be successful without error messages:

GRUB_CMDLINE_LINUX="libata.force=noncq"

Ingo

Attachment: OpenPGP_signature.asc
Description: OpenPGP digital signature


--- End Message ---

Reply via email to