Yesterday a lot of issues relevant for the sid_d-i images were fixed. This means that today we have the first images without major issues using 2.6.14 (x86 and sparc64) after a few days without new CD builds.
I have tested netboot installations for both x86 (in vmware 5.5) and
sparc64. Both successfully.
Most remaining issues I see are with the kernel and kernel installation
and at least partly particular to devices used in vmware:
- vmware (<5.5) uses the BusLogic SCSI driver which is not sysfs ready
- vmware (=5.5) offers choice between the BusLogic SCSI driver and the
LSI (Fusion) SCSI driver
Here's an overview. Only combinations I've tried are listed.
Note that d-i currently uses both udev and discover. The next step will be
dropping discover and see what configurations break because of that.
2.6.14 kernel has a bug in memory management system (#341392). This bug is
visible on boot for both the installer and the installed system. I've not
seen any problems that could be caused by this though.
Installing etch using sid_d-i (x86):
- 2.6.14 kernel in installer; 2.6.12 kernel for installed system
- vmware with LSI
- initrd-tools: gets confused because 2.6.14 needs an extra module
mptspi that did not exist in 2.6.12; reboot fails (no bug filed)
Installing sid using sid_d-i (x86):
- 2.6.14 kernel in installer and for installed system
- vmware with BusLogic
- yaird: does not support non-sysfs drivers; initrd is created, but does
not boot (#336392)
- initramfs: does not load BusLogic driver even though it is on the
initrd (will file bug)
- vmware with LSI
- yaird: generates good initrd; reboot ok
- initramfs-tools: does not include new mptspi module needed for
2.6.14; initrd is created, but does not boot (#341930)
Cheers,
FJP
pgpvoha1QmyeV.pgp
Description: PGP signature
