Package: src:linux
Version: 6.5.8-1
Severity: normal
Please enable the following options as modules to enable audio support
on Lenovo X13s platform:
CONFIG_SND_SOC_SC8280XP
CONFIG_SC_LPASSCC_8280XP
--
With best wishes
Dmitry
-- Package-specific info:
** Version:
Linux version 6.5.0-3-arm64 (debian-kernel@lists.debian.org) (gcc-13 (Debian
13.2.0-5) 13.2.0, GNU ld (GNU Binutils for Debian) 2.41) #1 SMP Debian 6.5.8-1
(2023-10-22)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-6.5.0-3-arm64
root=UUID=88586ed9-a0b9-45ec-b5db-5059b8edcbf1 ro arm64.nopauth
** Not tainted
** Kernel log:
[ 22.754825] ath11k_pci 0006:01:00.0: failed to power up mhi: -110
[ 22.754881] ath11k_pci 0006:01:00.0: failed to start mhi: -110
[ 22.754907] ath11k_pci 0006:01:00.0: failed to power up :-110
[ 22.771154] ath11k_pci 0006:01:00.0: failed to create soc core: -110
[ 22.771181] ath11k_pci 0006:01:00.0: failed to init core: -110
[ 22.955707] ath11k_pci: probe of 0006:01:00.0 failed with error -110
[ 65.164561] hub 4-1:1.0: hub_ext_port_status failed (err = -71)
[ 65.169792] usb 4-1-port3: cannot reset (err = -71)
[ 65.174772] usb 4-1-port3: cannot reset (err = -71)
[ 65.180027] usb 4-1-port3: cannot reset (err = -71)
[ 65.184234] usb 4-1-port3: cannot reset (err = -71)
[ 65.188812] usb 4-1-port3: cannot reset (err = -71)
[ 65.191537] usb 4-1-port3: Cannot enable. Maybe the USB cable is bad?
[ 65.195067] usb 4-1-port3: cannot disable (err = -71)
[ 65.198956] hub 4-1:1.0: hub_ext_port_status failed (err = -71)
[ 65.204116] usb 4-1-port3: cannot reset (err = -71)
[ 65.208694] usb 4-1-port3: cannot reset (err = -71)
[ 65.212830] usb 4-1-port3: cannot reset (err = -71)
[ 65.216364] usb 4-1-port3: cannot reset (err = -71)
[ 65.220313] usb 4-1-port3: cannot reset (err = -71)
[ 65.222368] usb 4-1-port3: Cannot enable. Maybe the USB cable is bad?
[ 65.225303] usb 4-1-port3: cannot disable (err = -71)
[ 65.228485] hub 4-1:1.0: hub_ext_port_status failed (err = -71)
[ 65.231826] usb 4-1-port3: cannot reset (err = -71)
[ 65.234887] usb 4-1-port3: cannot reset (err = -71)
[ 65.238079] usb 4-1-port3: cannot reset (err = -71)
[ 65.239198] usb 3-1: USB disconnect, device number 2
[ 65.241544] usb 3-1.4: USB disconnect, device number 3
[ 65.243672] usb 4-1-port3: cannot reset (err = -71)
[ 65.257055] usb 4-1: USB disconnect, device number 2
[ 65.259859] usb 4-1.3: USB disconnect, device number 3
[ 65.260552] usb 4-1-port3: cannot reset (err = -71)
[ 65.265377] usb 4-1-port3: Cannot enable. Maybe the USB cable is bad?
[ 65.352362] usb 4-1.4: USB disconnect, device number 4
[ 111.062931] ath11k_pci 0006:01:00.0: BAR 0: assigned [mem
0x30400000-0x305fffff 64bit]
[ 111.078027] ath11k_pci 0006:01:00.0: MSI vectors: 32
[ 111.080194] ath11k_pci 0006:01:00.0: wcn6855 hw2.1
[ 111.275537] mhi mhi1: Requested to power ON
[ 111.277673] mhi mhi1: Power on setup success
[ 111.279256] mhi mhi1: firmware: direct-loading firmware
ath11k/WCN6855/hw2.1/amss.bin
[ 113.030380] mhi mhi1: Wait for device to enter SBL or Mission mode
[ 115.605122] qcom-soundwire 3210000.soundwire-controller: Failed to get cgcr
reset ctrl required for SW gating
[ 115.606035] qcom-soundwire 3250000.soundwire-controller: Failed to get cgcr
reset ctrl required for SW gating
[ 115.607279] qcom-soundwire 3330000.soundwire-controller: Failed to get cgcr
reset ctrl required for SW gating
[ 115.617805] qcom-soundwire 3210000.soundwire-controller: Failed to get cgcr
reset ctrl required for SW gating
[ 115.619137] qcom-soundwire 3250000.soundwire-controller: Failed to get cgcr
reset ctrl required for SW gating
[ 115.620308] qcom-soundwire 3330000.soundwire-controller: Failed to get cgcr
reset ctrl required for SW gating
[ 115.632156] ath11k_pci 0006:01:00.0: chip_id 0x2 chip_family 0xb board_id
0x8c soc_id 0x400c0210
[ 115.632966] ath11k_pci 0006:01:00.0: fw_version 0x110b196e
fw_build_timestamp 2022-12-22 12:54 fw_build_id
WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
[ 115.638474] ath11k_pci 0006:01:00.0: firmware: direct-loading firmware
ath11k/WCN6855/hw2.1/board-2.bin
[ 115.652049] ath11k_pci 0006:01:00.0: firmware: direct-loading firmware
ath11k/WCN6855/hw2.1/board-2.bin
[ 115.683354] ath11k_pci 0006:01:00.0: firmware: direct-loading firmware
ath11k/WCN6855/hw2.1/m3.bin
[ 116.198662] ath11k_pci 0006:01:00.0 wlP6p1s0: renamed from wlan0
[ 116.286806] warning: `iwconfig' uses wireless extensions which will stop
working for Wi-Fi 7 hardware; use nl80211
[ 122.920684] wlP6p1s0: authenticate with d8:47:32:c2:8f:7e
[ 123.118676] wlP6p1s0: send auth to d8:47:32:c2:8f:7e (try 1/3)
[ 123.127462] wlP6p1s0: authenticated
[ 123.139120] wlP6p1s0: associate with d8:47:32:c2:8f:7e (try 1/3)
[ 123.144188] wlP6p1s0: RX AssocResp from d8:47:32:c2:8f:7e (capab=0x11
status=0 aid=3)
[ 123.162752] wlP6p1s0: associated
[ 554.559436] systemd-journald[299]: Time jumped backwards, rotating.
[ 756.424925] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 756.426082] Bluetooth: BNEP filters: protocol multicast
[ 756.427205] Bluetooth: BNEP socket layer initialized
[ 795.497044] audit: type=1400 audit(1698690062.331:9): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=17502
comm="apparmor_parser"
[ 795.497689] audit: type=1400 audit(1698690062.331:10): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_filter" pid=17502
comm="apparmor_parser"
[ 795.498242] audit: type=1400 audit(1698690062.331:11): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_groff" pid=17502
comm="apparmor_parser"
[ 808.011451] SGI XFS with ACLs, security attributes, realtime, quota, no
debug enabled
[ 808.018178] JFS: nTxBlock = 8192, nTxLock = 65536
[ 808.055938] QNX4 filesystem 0.2.3 registered.
[ 808.135104] raid6: neonx8 gen() 13333 MB/s
[ 808.203103] raid6: neonx4 gen() 13135 MB/s
[ 808.271102] raid6: neonx2 gen() 12812 MB/s
[ 808.339428] raid6: neonx1 gen() 10843 MB/s
[ 808.407104] raid6: int64x8 gen() 8023 MB/s
[ 808.475104] raid6: int64x4 gen() 7548 MB/s
[ 808.543103] raid6: int64x2 gen() 6405 MB/s
[ 808.611105] raid6: int64x1 gen() 5086 MB/s
[ 808.611757] raid6: using algorithm neonx8 gen() 13333 MB/s
[ 808.679103] raid6: .... xor() 10666 MB/s, rmw enabled
[ 808.679751] raid6: using neon recovery algorithm
[ 808.681934] xor: measuring software checksum speed
[ 808.682782] 8regs : 27247 MB/sec
[ 808.683624] 32regs : 26944 MB/sec
[ 808.684281] arm64_neon : 45956 MB/sec
[ 808.684711] xor: using function: arm64_neon (45956 MB/sec)
[ 808.704280] Btrfs loaded, zoned=yes, fsverity=yes
[ 811.776340] audit: type=1400 audit(1698690078.611:12): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-oosplash"
pid=20483 comm="apparmor_parser"
[ 811.819035] audit: type=1400 audit(1698690078.651:13): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-senddoc"
pid=20489 comm="apparmor_parser"
[ 814.829639] audit: type=1400 audit(1698690081.663:14): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-soffice"
pid=20495 comm="apparmor_parser"
[ 814.830193] audit: type=1400 audit(1698690081.663:15): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg"
pid=20495 comm="apparmor_parser"
[ 814.877092] audit: type=1400 audit(1698690081.711:16): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport"
pid=20501 comm="apparmor_parser"
[ 830.744421] audit: type=1400 audit(1698690097.579:17): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/libexec/geoclue"
pid=26297 comm="apparmor_parser"
[ 833.368260] audit: type=1400 audit(1698690100.203:18): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=26369
comm="apparmor_parser"
[ 833.368787] audit: type=1400 audit(1698690100.203:19): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/bin/evince//sanitized_helper" pid=26369 comm="apparmor_parser"
[ 833.369210] audit: type=1400 audit(1698690100.203:20): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/bin/evince//snap_browsers" pid=26369 comm="apparmor_parser"
[ 833.371673] audit: type=1400 audit(1698690100.207:21): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer"
pid=26369 comm="apparmor_parser"
[ 833.372180] audit: type=1400 audit(1698690100.207:22): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/bin/evince-previewer//sanitized_helper" pid=26369
comm="apparmor_parser"
[ 833.372842] audit: type=1400 audit(1698690100.207:23): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/bin/evince-thumbnailer" pid=26369 comm="apparmor_parser"
[ 1035.576345] audit: type=1400 audit(1698690302.411:24): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="system_tor" pid=27625
comm="apparmor_parser"
** Model information
Device Tree model: Lenovo ThinkPad X13s
** Loaded modules:
btrfs
blake2b_generic
xor
xor_neon
raid6_pq
ufs
qnx4
hfsplus
hfs
cdrom
minix
msdos
jfs
xfs
libcrc32c
bnep
aes_ce_ccm
michael_mic
qrtr_mhi
ath11k_pci
q6prm_clocks
q6apm_lpass_dais
snd_q6dsp_common
q6apm_dai
q6prm
sd_mod
sg
uas
usb_storage
scsi_mod
scsi_common
xhci_plat_hcd
xhci_hcd
snd_q6apm
usbcore
panel_edp
nls_ascii
nls_cp437
vfat
fat
apr
fastrpc
qrtr_smd
dwc3
governor_simpleondemand
snd_soc_hdmi_codec
mhi_wwan_mbim
mhi_wwan_ctrl
udc_core
wwan
hci_uart
roles
btqca
pm8941_pwrkey
btrtl
ulpi
ath11k
btbcm
qcom_battmgr
pmic_glink_altmode
btintel
mac80211
libarc4
bluetooth
aes_ce_blk
aes_ce_cipher
cfg80211
polyval_ce
polyval_generic
ecdh_generic
qcom_spmi_adc5
qcom_spmi_temp_alarm
qcom_vadc_common
qcom_pon
nvmem_qcom_spmi_sdam
ghash_ce
industrialio
reboot_mode
gf128mul
sha2_ce
snd_soc_wcd938x
ecc
sha256_arm64
snd_soc_wcd938x_sdw
sha1_ce
gpio_sbu_mux
snd_soc_wcd_mbhc
qcom_stats
qcom_tsens
dispcc_sc8280xp
snd_soc_lpass_rx_macro
snd_soc_lpass_tx_macro
soundwire_qcom
snd_soc_lpass_va_macro
slimbus
mhi_pci_generic
rfkill
regmap_sdw
soundwire_bus
snd_soc_lpass_wsa_macro
qcom_q6v5_pas
mhi
snd_soc_lpass_macro_common
dwc3_qcom
qcom_pil_info
usb_common
icc_bwmon
qcom_common
snd_soc_core
qcom_glink_smem
qrtr
qcom_ipcc
qcom_glink
gpucc_sc8280xp
snd_compress
qcom_smd
qcom_hwspinlock
snd_pcm_dmaengine
qcom_q6v5
pmic_glink
snd_pcm
qcom_sysmon
pdr_interface
snd_timer
icc_osm_l3
qcom_wdt
qcom_cpufreq_hw
qcom_rng
qmi_helpers
rpmsg_core
smp2p
snd
gpio_keys
leds_gpio
soundcore
smem
hid_multitouch
fuse
loop
dm_mod
efi_pstore
dax
configfs
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
msm
nvme
joydev
evdev
nvme_core
hid_generic
t10_pi
mdt_loader
drm_dp_aux_bus
i2c_hid_of
ocmem
i2c_hid
gpu_sched
hid
drm_display_helper
crc64_rocksoft
phy_qcom_qmp_combo
crc64
leds_qcom_lpg
crc_t10dif
crct10dif_generic
led_class_multicolor
rtc_pm8xxx
i2c_qcom_geni
drm_kms_helper
pinctrl_sc8280xp
qcom_spmi_pmic
drm
crct10dif_ce
pinctrl_sc8280xp_lpass_lpi
crct10dif_common
phy_qcom_edp
typec
llcc_qcom
phy_qcom_snps_femto_v2
pinctrl_lpass_lpi
qcom_rpmh_regulator
gcc_sc8280xp
phy_qcom_qmp_pcie
fixed
qnoc_sc8280xp
pwm_bl
** PCI devices:
0002:00:00.0 PCI bridge [0604]: Qualcomm Technologies, Inc SC8280XP PCI Express
Root Port [17cb:010e] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 169
Region 0: Memory at 3c400000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=ff, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: 3c300000-3c3fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
0002:01:00.0 Non-Volatile memory controller [0108]: Shenzhen Unionmemory
Information System Ltd. AM630 PCIe 4.0 x4 NVMe SSD Controller [1cc4:6303] (rev
03) (prog-if 02 [NVM Express])
Subsystem: Shenzhen Unionmemory Information System Ltd. AM630 PCIe 4.0
x4 NVMe SSD Controller [1cc4:6303]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 168
Region 0: Memory at 3c300000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
0004:00:00.0 PCI bridge [0604]: Qualcomm Technologies, Inc SC8280XP PCI Express
Root Port [17cb:010e] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 167
Region 0: Memory at 34400000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=ff, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: 34300000-343fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
0004:01:00.0 Wireless controller [0d40]: Foxconn International, Inc. T99W175 5G
Modem [Snapdragon X55] [105b:e0c3]
Subsystem: Foxconn International, Inc. T99W175 5G Modem [Snapdragon
X55] [105b:e0c3]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin ? routed to IRQ 191
Region 0: Memory at 34300000 (64-bit, non-prefetchable) [size=4K]
Region 2: Memory at 34301000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mhi-pci-generic
Kernel modules: mhi_pci_generic
0006:00:00.0 PCI bridge [0604]: Qualcomm Technologies, Inc SC8280XP PCI Express
Root Port [17cb:010e] (prog-if 00 [Normal decode])
Device tree node:
/sys/firmware/devicetree/base/soc@0/pcie@1c00000/pcie@0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 171
Region 0: Memory at 30300000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=ff, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: 30400000-305fffff [size=2M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
0006:01:00.0 Network controller [0280]: Qualcomm Technologies, Inc QCNFA765
Wireless Network Adapter [17cb:1103] (rev 01)
Subsystem: Qualcomm Technologies, Inc QCNFA765 Wireless Network Adapter
[17cb:0108]
Device tree node:
/sys/firmware/devicetree/base/soc@0/pcie@1c00000/pcie@0/wifi@0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin ? routed to IRQ 238
Region 0: Memory at 30400000 (64-bit, non-prefetchable) [size=2M]
Capabilities: <access denied>
Kernel driver in use: ath11k_pci
Kernel modules: ath11k_pci
** USB devices:
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: trixie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: arm64 (aarch64)
Kernel: Linux 6.5.0-3-arm64 (SMP w/8 CPU threads)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-6.5.0-3-arm64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.142
ii kmod 30+20230601-2
ii linux-base 4.9
Versions of packages linux-image-6.5.0-3-arm64 recommends:
ii apparmor 3.0.12-1
ii firmware-linux-free 20200122-2
Versions of packages linux-image-6.5.0-3-arm64 suggests:
pn debian-kernel-handbook <none>
pn linux-doc-6.5 <none>
Versions of packages linux-image-6.5.0-3-arm64 is related to:
pn firmware-amd-graphics <none>
ii firmware-atheros 20230515-3
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
