hi, with the upgrade to 2.6.14 my system has a horrible interactive feel. $ uname -a Linux alan 2.6.14-2-k7 #1 Mon Nov 14 15:33:15 UTC 2005 i686 GNU/Linux $ lspci -v -s 00:07.1 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Flags: bus master, medium devsel, latency 32 I/O ports at d000 [size=16] Capabilities: [c0] Power Management version 2
i hit the same problem reported by Curt: # hdparm -d1 /dev/hdb /dev/hdb: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) # hdparm -i /dev/hdb /dev/hdb: Model=Maxtor 6Y120L0, FwRev=YAR41BW0, SerialNo=Y3KGN5ME Config={ Fixed } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57 BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=off CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=240121728 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 udma6 AdvancedPM=yes: disabled (255) WriteCache=enabled Drive conforms to: (null): * signifies the current active mode and the same goes for hda. i use initramfs-tools, and as far as i can tell *the via82cxxx module is driving the disks*. $ lsmod [...] ide_cd 43780 0 cdrom 40800 1 ide_cd ide_disk 18944 8 ide_generic 1280 0 [permanent] ide_core 130908 5 generic,via82cxxx,ide_cd,ide_disk,ide_generic unix 28336 532 $ ls /sys/bus/pci/drivers/ 8139too PCI_IDE VIA 82xx Audio VIA_IDE agpgart-via parport_pc [...] $ ls /sys/bus/pci/drivers/VIA_IDE/ 0000:00:07.1 bind new_id unbind cheers, alessandro -- Alessandro Amici <[EMAIL PROTECTED]> - PGP 1024D/B6E5103F Responsabile Tecnico - B-Open Solutions srl - http://www.bopen.it/ Via Casilina, 3/T - 00182 Roma - tel: +39 06 9784 5062 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]