Package: src:linux Version: 5.10.149-1 Followup-For: Bug #1022051 X-Debbugs-Cc: p...@web.de
Dear Maintainer, This morning kernel package linux-image-5.10.0-19-amd64 was installed on my PC with AMD Ryzen 7 5700G CPU. After the installation of the package the PC booted very slowly show> [ 15.624720] [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:62:crtc-0] flip_done timed out [ 25.864724] [drm:drm_atomic_helper_wait_for_dependencies ([drm_kms_helper]] *ERROR* [CRTC:62:crtc-0] flip_done timed out [ 36.104725] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [PLANE:52:plane-3] flip_done timed out [ 46.344721] [drm:drm_atomic_helper_wait_for_flip_done (drm_kms_helper]] *ERROR* [CRTC:62:crtc-0] flip_done timed out root: recovering journal root: clean, 397409/3145728 files, 5192985/12582912 blocks [ 47.942087] sp5100-tco sp5100-tco: Watchdog hardware is disabled fsckd-cancel-msg:Press Ctrl+C to cancel all filesystem checks in progress [ 48.523039] r8152 4-2.4:1.0: firmware: failed to load rtl_nic/rt18153b-2.fw (-2) [ 48.523041] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 56.585021] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:62:crtc-0] flip_done timed out [ 66.825042] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [PLANE:52:plane-3] flip_done timed out [ 77.065076] [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:62:crtc-0] flip.done timed out [ 87.305057] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:62:crtc-0] flip_done timed out [ 97.544998] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:80:HDMI-A-1] flip_done timed out [ 107.784928] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [PLANE:52:plane-3] flip_done timed out [ 118.024970] [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR«* [CRTC:62:crtc-0] flip_done timed out [ 128.265161] [drm:drm_atomic_helper_wait_for_dependencies (drm_kms_helper]] *ERROR* [CRTC:62:crtc-0] flip_done timed out [ 138.505040] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [PLANE:52:plane-3] flip_done timed out [ 148.745042] [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:62:crtc-0] flip_done timed out [ 158.985003] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:62:crtc-0] flip_done timed out [ 169.225025] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:80:HDMI-A-1] flip.done timed out [ 179.464985] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [PLANE:52:plane-3] flip_done timed out [ 189.704990] [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:62:crtc-0] flip_done timed out [ 199.944982] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR*« [CRTC:62:crtc-0] flip.done timed out [ 210.185111] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [PLANE:52:plane-3] flip_done timed out [ 220.425049] [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:62:crtc-0] flip_done timed out [ 230.664937] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:62:crtc-0] flip_done timed out [ 240.905037] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:80:HDMI-A-1] flip_done timed out [ 251.144926] [dem:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [PLANE:52:plane-3] flip_done timed out [ 261.385010] [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:62:crtc-0] flip_done timed out After about 5 minutes the screen turned to black (no GUI was initialized) and remained in this state. At this point in time it was at least possible to logon to the machine via ssh. Removal of package linux-image-5.10.0-19-amd64 and rollback to linux-image-5.10.0-18-amd64 has solved the issue. -- Package-specific info: ** Version: Linux version 5.10.0-19-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.149-1 (2022-10-17) ** Command line: BOOT_IMAGE=/vmlinuz-5.10.0-19-amd64 root=/dev/mapper/vg_raid1-root ro quiet ** Tainted: W (512) * kernel issued warning ** Kernel log: Unable to read kernel log; any relevant messages should be attached ** Model information sys_vendor: ASUS product_name: System Product Name product_version: System Version chassis_vendor: Default string chassis_version: Default string bios_vendor: American Megatrends Inc. bios_version: 2603 board_vendor: ASUSTeK COMPUTER INC. board_name: ProArt B550-CREATOR board_version: Rev X.0x ** Loaded modules: nfnetlink cbc cts rpcsec_gss_krb5 nfsv4 dns_resolver nfs nfs_ssc fscache bridge stp llc binfmt_misc cdc_ether usbnet edac_mce_amd kvm_amd kvm snd_hda_codec_realtek snd_hda_codec_generic irqbypass ledtrig_audio ghash_clmulni_intel snd_hda_codec_hdmi uvcvideo snd_hda_intel videobuf2_vmalloc videobuf2_memops snd_intel_dspcfg soundwire_intel videobuf2_v4l2 soundwire_generic_allocation videobuf2_common aesni_intel snd_soc_core snd_usb_audio libaes crypto_simd nls_ascii cryptd glue_helper snd_compress nls_cp437 videodev snd_usbmidi_lib soundwire_cadence asus_nb_wmi eeepc_wmi vfat asus_wmi snd_rawmidi snd_seq_device battery fat joydev rapl mc snd_hda_codec r8152 sparse_keymap mii rfkill usblp snd_hda_core pcspkr video snd_hwdep wmi_bmof soundwire_bus snd_pcm efi_pstore sg snd_timer sp5100_tco snd watchdog soundcore ccp tpm_crb tpm_tis tpm_tis_core tpm evdev acpi_cpufreq rng_core nfsd msr nfs_acl lockd auth_rpcgss parport_pc grace ppdev lp parport sunrpc fuse configfs efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid0 multipath linear hid_logitech_hidpp hid_logitech_dj hid_jabra sd_mod amdgpu hid_generic raid1 usbhid uas hid usb_storage gpu_sched i2c_algo_bit ttm dm_mod md_mod drm_kms_helper ahci cec libahci xhci_pci drm xhci_hcd libata nvme usbcore nvme_core scsi_mod igc crc32_pclmul crc32c_intel i2c_piix4 t10_pi ptp crc_t10dif crct10dif_generic crct10dif_pclmul pps_core crct10dif_common usb_common wmi gpio_amdpt gpio_generic button ** PCI devices: 00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir Root Complex [1022:1630] Subsystem: ASUSTeK Computer Inc. Renoir Root Complex [1043:8809] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:00.2 IOMMU [0806]: Advanced Micro Devices, Inc. [AMD] Renoir IOMMU [1022:1631] Subsystem: ASUSTeK Computer Inc. Renoir IOMMU [1043:8809] Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 25 Capabilities: <access denied> 00:01.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge [1022:1632] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- IOMMU group: 0 00:02.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge [1022:1632] DeviceName: Onboard IGD Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- IOMMU group: 1 00:02.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Renoir PCIe GPP Bridge [1022:1634] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 26 IOMMU group: 2 Bus: primary=00, secondary=01, subordinate=05, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: fc500000-fcafffff [size=6M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:02.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Renoir PCIe GPP Bridge [1022:1634] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 27 IOMMU group: 3 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: fcf00000-fcffffff [size=1M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:08.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge [1022:1632] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- IOMMU group: 4 00:08.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus [1022:1635] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 28 IOMMU group: 5 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 0000f000-0000ffff [size=4K] Memory behind bridge: fcb00000-fcefffff [size=4M] Prefetchable memory behind bridge: 00000000d0000000-00000000e01fffff [size=258M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:790b] (rev 51) Subsystem: ASUSTeK Computer Inc. FCH SMBus Controller [1043:87e1] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- IOMMU group: 6 Kernel driver in use: piix4_smbus Kernel modules: i2c_piix4, sp5100_tco 00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:790e] (rev 51) Subsystem: ASUSTeK Computer Inc. FCH LPC Bridge [1043:87e1] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 IOMMU group: 6 00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:166a] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- IOMMU group: 7 00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:166b] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- IOMMU group: 7 00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:166c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- IOMMU group: 7 00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:166d] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- IOMMU group: 7 00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:166e] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- IOMMU group: 7 00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:166f] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- IOMMU group: 7 00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1670] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- IOMMU group: 7 00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1671] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- IOMMU group: 7 01:00.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Device [1022:43ee] (prog-if 30 [XHCI]) Subsystem: ASMedia Technology Inc. Device [1b21:1142] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 31 IOMMU group: 8 Region 0: Memory at fcaa0000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 01:00.1 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] Device [1022:43eb] (prog-if 01 [AHCI 1.0]) Subsystem: ASMedia Technology Inc. Device [1b21:1062] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 108 IOMMU group: 8 Region 5: Memory at fca80000 (32-bit, non-prefetchable) [size=128K] Expansion ROM at fca00000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 01:00.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:43e9] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 30 IOMMU group: 8 Bus: primary=01, secondary=02, subordinate=05, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: fc500000-fc9fffff [size=5M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 02:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:43ea] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 32 IOMMU group: 8 Bus: primary=02, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: fc900000-fc9fffff [size=1M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 02:08.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:43ea] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 33 IOMMU group: 8 Bus: primary=02, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: fc700000-fc8fffff [size=2M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 02:09.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:43ea] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 35 IOMMU group: 8 Bus: primary=02, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: fc500000-fc6fffff [size=2M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 03:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller PM9A1/980PRO [144d:a80a] (prog-if 02 [NVM Express]) Subsystem: Samsung Electronics Co Ltd Device [144d:a801] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 31 NUMA node: 0 IOMMU group: 8 Region 0: Memory at fc900000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: nvme Kernel modules: nvme 04:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller I225-V [8086:15f3] (rev 03) Subsystem: ASUSTeK Computer Inc. Ethernet Controller I225-V [1043:87d2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 31 IOMMU group: 8 Region 0: Memory at fc700000 (32-bit, non-prefetchable) [size=1M] Region 3: Memory at fc800000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: igc Kernel modules: igc 05:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller I225-V [8086:15f3] (rev 03) Subsystem: ASUSTeK Computer Inc. Ethernet Controller I225-V [1043:87d2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 34 IOMMU group: 8 Region 0: Memory at fc500000 (32-bit, non-prefetchable) [size=1M] Region 3: Memory at fc600000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: igc Kernel modules: igc 06:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller PM9A1/980PRO [144d:a80a] (prog-if 02 [NVM Express]) Subsystem: Samsung Electronics Co Ltd Device [144d:a801] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 36 NUMA node: 0 IOMMU group: 9 Region 0: Memory at fcf00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: nvme Kernel modules: nvme 07:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Cezanne [1002:1638] (rev c8) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:8809] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 29 IOMMU group: 10 Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=2M] Region 4: I/O ports at f000 [size=256] Region 5: Memory at fce00000 (32-bit, non-prefetchable) [size=512K] Expansion ROM at 000c0000 [virtual] [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: amdgpu Kernel modules: amdgpu 07:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:1637] Subsystem: ASUSTeK Computer Inc. Device [1043:8809] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 142 IOMMU group: 11 Region 0: Memory at fce88000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 07:00.2 Encryption controller [1080]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) Platform Security Processor [1022:15df] Subsystem: ASUSTeK Computer Inc. Family 17h (Models 10h-1fh) Platform Security Processor [1043:8809] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 31 IOMMU group: 12 Region 2: Memory at fcd00000 (32-bit, non-prefetchable) [size=1M] Region 5: Memory at fce8c000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: ccp Kernel modules: ccp 07:00.3 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Renoir USB 3.1 [1022:1639] (prog-if 30 [XHCI]) Subsystem: ASUSTeK Computer Inc. Renoir USB 3.1 [1043:87e1] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 34 IOMMU group: 13 Region 0: Memory at fcc00000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 07:00.4 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Renoir USB 3.1 [1022:1639] (prog-if 30 [XHCI]) Subsystem: ASUSTeK Computer Inc. Renoir USB 3.1 [1043:87e1] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 29 IOMMU group: 14 Region 0: Memory at fcb00000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 07:00.6 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) HD Audio Controller [1022:15e3] Subsystem: ASUSTeK Computer Inc. Family 17h (Models 10h-1fh) HD Audio Controller [1043:8733] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 143 IOMMU group: 15 Region 0: Memory at fce80000 (32-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel ** USB devices: Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 002: ID 0482:0d86 Kyocera Corp. Kyocera ECOSYS MA2100cfx Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 004: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153 Gigabit Ethernet Adapter Bus 004 Device 003: ID 2109:0817 VIA Labs, Inc. USB3.0 Hub Bus 004 Device 002: ID 2109:0817 VIA Labs, Inc. USB3.0 Hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 008: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 003 Device 007: ID 0b0e:0412 GN Netcom Jabra SPEAK 410 USB Bus 003 Device 006: ID 046d:081b Logitech, Inc. Webcam C310 Bus 003 Device 005: ID 2109:2817 VIA Labs, Inc. USB2.0 Hub Bus 003 Device 004: ID 056d:405f EIZO Corp. EIZO USB HID Monitor Bus 003 Device 003: ID 2109:2817 VIA Labs, Inc. USB2.0 Hub Bus 003 Device 002: ID 0c4b:0501 Reiner SCT Kartensysteme GmbH cyberJack RFID comfort dual interface smartcard reader Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 003: ID 2109:0817 VIA Labs, Inc. USB3.0 Hub Bus 002 Device 002: ID 05e3:0749 Genesys Logic, Inc. SD Card Reader and Writer Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0b05:19af ASUSTek Computer, Inc. AURA LED Controller Bus 001 Device 002: ID 2109:2817 VIA Labs, Inc. USB2.0 Hub Bus 001 Device 004: ID 05e3:0608 Genesys Logic, Inc. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 11.5 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 5.10.0-19-amd64 (SMP w/16 CPU threads) Kernel taint flags: TAINT_WARN Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-5.10.0-19-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.140 ii kmod 28-1 ii linux-base 4.6 Versions of packages linux-image-5.10.0-19-amd64 recommends: ii apparmor 2.13.6-10 ii firmware-linux-free 20200122-1 Versions of packages linux-image-5.10.0-19-amd64 suggests: ii debian-kernel-handbook 1.0.19 ii grub-efi-amd64 2.06-3~deb11u2 ii linux-doc-5.10 5.10.149-1 Versions of packages linux-image-5.10.0-19-amd64 is related to: ii firmware-amd-graphics 20210315-3 pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux-nonfree 20210315-3 ii firmware-misc-nonfree 20210315-3 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
