--- Begin Message ---
Package: src:linux
Version: 5.3.9-3
Severity: normal
Dear Maintainer,
I have a Lenovo Ideapad 530s with an AMD ryzen cpu. This has been running fine
under Debian, since I first bought the computer, although the touchpad does not
work after boot. I found a very simple remedy for this using the
https://github.com/Syniurge/i2c-amd-mp2 driver, which is supplied as a DKMS
build, and simply installed and worked. When I apt upgraded my machine at the
start of this week, and moved to a 5.3 series debian kernel, the DKMS build
stopped working, and after boot I was surprised to have no trackpad again.
I looked at the build problem with the module, and it was a very simple
problem, where the prototype for one of the functions from device.h has become
slightly more strict. When I submitted this change to the upstream repo, the
reply from the author is that the module should be merged into the upstream
kernel since releasae 5.2 and a separated build should not be necessary for
kernels > 5.1. They report that the debian kernel seems to be exluding this
module, but they don't know why.
( see https://github.com/Syniurge/i2c-amd-mp2/pull/14 )
Is there a reason this is not available in the debian kernel image? Do I need
to install additional packages, or perhaps make such a package myself.
Thanks
cms
-- Package-specific info:
** Version:
Linux version 5.3.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 9.2.1
20191109 (Debian 9.2.1-19)) #1 SMP Debian 5.3.9-3 (2019-11-19)
** Command line:
BOOT_IMAGE=/vmlinuz-5.3.0-2-amd64 root=/dev/mapper/blink--vg-root ro quiet
** Tainted: OE (12288)
* Out-of-tree module has been loaded.
* Unsigned module has been loaded.
** Kernel log:
(Note that use of the override may cause unknown side effects.)
[ 17.594132] ath10k_pci 0000:01:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp
max-sta 32 raw 0 hwcrypto 1
[ 17.596964] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 17.622248] mc: Linux media interface: v0.10
[ 17.622285] EDAC amd64: Node 0: DRAM ECC disabled.
[ 17.622289] EDAC amd64: ECC disabled in the BIOS or no ECC capability,
module will not load.
Either enable ECC checking or force module loading by setting
'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 17.644207] videodev: Linux video capture interface: v2.00
[ 17.672957] ath: EEPROM regdomain: 0x6c
[ 17.672960] ath: EEPROM indicates we should expect a direct regpair map
[ 17.672963] ath: Country alpha2 being used: 00
[ 17.672964] ath: Regpair used: 0x6c
[ 17.677797] ath10k_pci 0000:01:00.0 wlp1s0: renamed from wlan0
[ 17.688653] EDAC amd64: Node 0: DRAM ECC disabled.
[ 17.688655] EDAC amd64: ECC disabled in the BIOS or no ECC capability,
module will not load.
Either enable ECC checking or force module loading by setting
'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 17.698121] Bluetooth: Core ver 2.22
[ 17.698153] NET: Registered protocol family 31
[ 17.698154] Bluetooth: HCI device and connection manager initialized
[ 17.698330] Bluetooth: HCI socket layer initialized
[ 17.698333] Bluetooth: L2CAP socket layer initialized
[ 17.698338] Bluetooth: SCO socket layer initialized
[ 17.712914] usbcore: registered new interface driver btusb
[ 17.765968] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b61e)
[ 17.782522] uvcvideo 3-2:1.0: Entity type for entity Realtek Extended
Controls Unit was not initialized!
[ 17.782525] uvcvideo 3-2:1.0: Entity type for entity Extension 4 was not
initialized!
[ 17.782526] uvcvideo 3-2:1.0: Entity type for entity Processing 2 was not
initialized!
[ 17.782528] uvcvideo 3-2:1.0: Entity type for entity Camera 1 was not
initialized!
[ 17.782785] input: Integrated Camera: Integrated C as
/devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-2/3-2:1.0/input/input18
[ 17.783339] usbcore: registered new interface driver uvcvideo
[ 17.783341] USB Video Class driver (1.1.1)
[ 17.904204] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.904207] Bluetooth: BNEP filters: protocol multicast
[ 17.904214] Bluetooth: BNEP socket layer initialized
[ 18.761123] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
[ 18.895397] pcieport 0000:00:01.2: AER: Multiple Corrected error received:
0000:00:01.0
[ 18.895410] pcieport 0000:00:01.2: AER: PCIe Bus Error: severity=Corrected,
type=Data Link Layer, (Receiver ID)
[ 18.896225] pcieport 0000:00:01.2: AER: device [1022:15d3] error
status/mask=00000080/00006000
[ 18.897225] pcieport 0000:00:01.2: AER: [ 7] BadDLLP
[ 18.929438] pcieport 0000:00:01.2: AER: Multiple Corrected error received:
0000:00:01.0
[ 18.929452] pcieport 0000:00:01.2: AER: PCIe Bus Error: severity=Corrected,
type=Data Link Layer, (Receiver ID)
[ 18.931291] pcieport 0000:00:01.2: AER: device [1022:15d3] error
status/mask=00000040/00006000
[ 18.933110] pcieport 0000:00:01.2: AER: [ 6] BadTLP
[ 19.133043] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
[ 20.447946] Bluetooth: RFCOMM TTY layer initialized
[ 20.447965] Bluetooth: RFCOMM socket layer initialized
[ 20.447980] Bluetooth: RFCOMM ver 1.11
[ 20.826773] new mount options do not match the existing superblock, will be
ignored
[ 20.849360] fuse: init (API version 7.31)
[ 21.652617] bridge: filtering via arp/ip/ip6tables is no longer available by
default. Update your scripts to load br_netfilter if you need this.
[ 22.208100] lxdbr0: port 1(veth3be9edce) entered blocking state
[ 22.208103] lxdbr0: port 1(veth3be9edce) entered disabled state
[ 22.208254] device veth3be9edce entered promiscuous mode
[ 22.208340] lxdbr0: port 1(veth3be9edce) entered blocking state
[ 22.208342] lxdbr0: port 1(veth3be9edce) entered forwarding state
[ 22.208511] lxdbr0: port 1(veth3be9edce) entered disabled state
[ 22.357626] eth0: renamed from veth04f864ba
[ 22.404699] IPv6: ADDRCONF(NETDEV_CHANGE): veth3be9edce: link becomes ready
[ 22.404779] lxdbr0: port 1(veth3be9edce) entered blocking state
[ 22.404782] lxdbr0: port 1(veth3be9edce) entered forwarding state
[ 22.404999] IPv6: ADDRCONF(NETDEV_CHANGE): lxdbr0: link becomes ready
[ 22.465509] Not activating Mandatory Access Control as /sbin/tomoyo-init
does not exist.
[ 22.515086] lxdbr0: port 2(veth8f98473f) entered blocking state
[ 22.515090] lxdbr0: port 2(veth8f98473f) entered disabled state
[ 22.515328] device veth8f98473f entered promiscuous mode
[ 22.515415] lxdbr0: port 2(veth8f98473f) entered blocking state
[ 22.515417] lxdbr0: port 2(veth8f98473f) entered forwarding state
[ 22.614926] kauditd_printk_skb: 34 callbacks suppressed
[ 22.614930] audit: type=1400 audit(1575138895.397:46): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="lxd-pconch-builder_</var/snap/lxd/common/lxd>" pid=1582
comm="apparmor_parser"
[ 22.666454] lxdbr0: port 2(veth8f98473f) entered disabled state
[ 22.669752] eth0: renamed from vethd6e4c171
[ 22.692077] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.692140] IPv6: ADDRCONF(NETDEV_CHANGE): veth8f98473f: link becomes ready
[ 22.692228] lxdbr0: port 2(veth8f98473f) entered blocking state
[ 22.692230] lxdbr0: port 2(veth8f98473f) entered forwarding state
[ 22.815817] Not activating Mandatory Access Control as /sbin/tomoyo-init
does not exist.
[ 23.094661] rfkill: input handler disabled
[ 29.024399] wlp1s0: authenticate with dc:39:6f:1b:be:b2
[ 29.052976] wlp1s0: send auth to dc:39:6f:1b:be:b2 (try 1/3)
[ 29.054838] wlp1s0: authenticated
[ 29.055571] wlp1s0: associate with dc:39:6f:1b:be:b2 (try 1/3)
[ 29.057995] wlp1s0: RX AssocResp from dc:39:6f:1b:be:b2 (capab=0x1511
status=0 aid=4)
[ 29.060567] wlp1s0: associated
[ 29.071980] ath: EEPROM regdomain: 0x8114
[ 29.071983] ath: EEPROM indicates we should expect a country code
[ 29.071983] ath: doing EEPROM country->regdmn map search
[ 29.071984] ath: country maps to regdmn code: 0x37
[ 29.071986] ath: Country alpha2 being used: DE
[ 29.071986] ath: Regpair used: 0x37
[ 29.071989] ath: regdomain 0x8114 dynamically updated by country element
[ 29.127215] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 29.147174] wlp1s0: Limiting TX power to 23 (23 - 0) dBm as advertised by
dc:39:6f:1b:be:b2
[ 31.012274] rfkill: input handler enabled
[ 33.949448] rfkill: input handler disabled
[ 50.069145] pcieport 0000:00:01.2: AER: Corrected error received:
0000:00:01.0
[ 50.069156] pcieport 0000:00:01.2: AER: PCIe Bus Error: severity=Corrected,
type=Data Link Layer, (Transmitter ID)
[ 50.069161] pcieport 0000:00:01.2: AER: device [1022:15d3] error
status/mask=00001000/00006000
[ 50.069163] pcieport 0000:00:01.2: AER: [12] Timeout
** Model information
sys_vendor: LENOVO
product_name: 81H1
product_version: Lenovo ideapad 530S-14ARR
chassis_vendor: LENOVO
chassis_version: Lenovo ideapad 530S-14ARR
bios_vendor: LENOVO
bios_version: 8PCN45WW
board_vendor: LENOVO
board_name: LNVNB161216
board_version: SDK0J40709 WIN
** Loaded modules:
ctr
ccm
veth
ip6table_nat
ip6table_filter
ip6_tables
xt_MASQUERADE
xt_CHECKSUM
xt_comment
xt_tcpudp
iptable_nat
nf_nat
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
iptable_mangle
iptable_filter
bridge
stp
llc
fuse
rfcomm
cpufreq_userspace
cmac
cpufreq_powersave
cpufreq_conservative
bnep
uvcvideo
btusb
btrtl
videobuf2_vmalloc
btbcm
videobuf2_memops
btintel
videobuf2_v4l2
videobuf2_common
bluetooth
videodev
mc
drbg
ansi_cprng
ecdh_generic
ecc
joydev
binfmt_misc
hid_multitouch
edac_mce_amd
hid_generic
nls_ascii
nls_cp437
vfat
fat
kvm_amd
ccp
rng_core
kvm
ath10k_pci
ext4
snd_hda_codec_realtek
irqbypass
ath10k_core
i2c_hid
snd_hda_codec_generic
crc16
hid
mbcache
snd_hda_codec_hdmi
ledtrig_audio
jbd2
ath
crct10dif_pclmul
crc32_pclmul
snd_hda_intel
efi_pstore
mac80211
xhci_pci
crc32c_generic
snd_hda_codec
xhci_hcd
snd_hda_core
ghash_clmulni_intel
snd_hwdep
pcspkr
cfg80211
snd_pcm
efivars
usbcore
snd_timer
wmi_bmof
snd
sp5100_tco
watchdog
ideapad_laptop(OE)
k10temp
sparse_keymap
i2c_piix4
usb_common
libarc4
soundcore
rfkill
battery
i2c_designware_platform
i2c_designware_core
ac
i2c_amd_mp2(OE)
acpi_cpufreq
squashfs
loop
parport_pc
ppdev
lp
parport
efivarfs
ip_tables
x_tables
autofs4
btrfs
libcrc32c
xor
zstd_decompress
zstd_compress
raid6_pq
dm_crypt
dm_mod
amdgpu
crc32c_intel
mfd_core
gpu_sched
i2c_algo_bit
ttm
aesni_intel
drm_kms_helper
aes_x86_64
glue_helper
crypto_simd
cryptd
drm
evdev
serio_raw
nvme
nvme_core
wmi
video
button
** Network interface configuration:
*** /etc/network/interfaces:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: wlp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
group default qlen 1000
link/ether 00:f4:8d:e9:90:f9 brd ff:ff:ff:ff:ff:ff
inet 10.0.1.97/16 brd 10.0.255.255 scope global dynamic noprefixroute wlp1s0
valid_lft 863162sec preferred_lft 863162sec
inet6 fe80::2f4:8dff:fee9:90f9/64 scope link noprefixroute
valid_lft forever preferred_lft forever
3: lxdbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
group default qlen 1000
link/ether 76:83:51:49:7c:d6 brd ff:ff:ff:ff:ff:ff
inet 10.116.37.1/24 scope global lxdbr0
valid_lft forever preferred_lft forever
inet6 fd42:2c0f:d0e5:984e::1/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::7483:51ff:fe49:7cd6/64 scope link
valid_lft forever preferred_lft forever
5: veth3be9edce@if4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
master lxdbr0 state UP group default qlen 1000
link/ether fa:96:d8:92:83:f9 brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet6 fe80::f896:d8ff:fe92:83f9/64 scope link
valid_lft forever preferred_lft forever
7: veth8f98473f@if6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
master lxdbr0 state UP group default qlen 1000
link/ether 6a:af:4d:29:ff:8f brd ff:ff:ff:ff:ff:ff link-netnsid 1
inet6 fe80::68af:4dff:fe29:ff8f/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
veth3be9edce: 3192 33 0 0 0 0 0 0
23457 175 0 0 0 0 0 0
wlp1s0: 9068524 11735 0 822 0 0 0 0 1005331
7169 0 0 0 0 0 0
lxdbr0: 6306 80 0 0 0 0 0 0 16440
126 0 0 0 0 0 0
veth8f98473f: 4234 47 0 0 0 0 0 0
22873 179 0 0 0 0 0 0
lo: 877909 1865 0 0 0 0 0 0 877909
1865 0 0 0 0 0 0
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2
Root Complex [1022:15d0]
Subsystem: Lenovo Raven/Raven2 Root Complex [17aa:380a]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:00.2 IOMMU [0806]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 IOMMU
[1022:15d1]
Subsystem: Lenovo Raven/Raven2 IOMMU [17aa:3809]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 25
Capabilities: <access denied>
00:01.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h
(Models 00h-1fh) PCIe Dummy Host Bridge [1022:1452]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:01.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe
GPP Bridge [6:0] [1022:15d3] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 26
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: None
Memory behind bridge: e0200000-e03fffff [size=2M]
Prefetchable memory behind bridge: None
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:01.7 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe
GPP Bridge [6:0] [1022:15d3] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 27
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: None
Memory behind bridge: e0900000-e09fffff [size=1M]
Prefetchable memory behind bridge: None
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:08.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h
(Models 00h-1fh) PCIe Dummy Host Bridge [1022:1452]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:08.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2
Internal PCIe GPP Bridge 0 to Bus A [1022:15db] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00001fff [size=4K]
Memory behind bridge: e0400000-e08fffff [size=5M]
Prefetchable memory behind bridge: 00000000d0000000-00000000e01fffff
[size=258M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller
[1022:790b] (rev 61)
Subsystem: Lenovo FCH SMBus Controller [17aa:3818]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4, sp5100_tco
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge
[1022:790e] (rev 51)
Subsystem: Lenovo FCH LPC Bridge [17aa:3819]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2
Device 24: Function 0 [1022:15e8]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2
Device 24: Function 1 [1022:15e9]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2
Device 24: Function 2 [1022:15ea]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2
Device 24: Function 3 [1022:15eb]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k10temp
Kernel modules: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2
Device 24: Function 4 [1022:15ec]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2
Device 24: Function 5 [1022:15ed]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2
Device 24: Function 6 [1022:15ee]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2
Device 24: Function 7 [1022:15ef]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
01:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac Wireless
Network Adapter [168c:0042] (rev 31)
Subsystem: Lenovo QCA9377 802.11ac Wireless Network Adapter [17aa:0901]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 72
Region 0: Memory at e0200000 (64-bit, non-prefetchable) [size=2M]
Capabilities: <access denied>
Kernel driver in use: ath10k_pci
Kernel modules: ath10k_pci
02:00.0 Non-Volatile memory controller [0108]: SK hynix Device [1c5c:1327]
(prog-if 02 [NVM Express])
Subsystem: SK hynix Device [1c5c:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
NUMA node: 0
Region 0: Memory at e0900000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
03:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series]
[1002:15dd] (rev c4) (prog-if 00 [VGA controller])
DeviceName: Broadcom 5762
Subsystem: Lenovo Raven Ridge [Radeon Vega Series / Radeon Vega Mobile
Series] [17aa:39fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 32
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=2M]
Region 4: I/O ports at 1000 [size=256]
Region 5: Memory at e0800000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
Kernel driver in use: amdgpu
Kernel modules: amdgpu
03:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI]
Raven/Raven2/Fenghuang HDMI/DP Audio Controller [1002:15de]
Subsystem: Lenovo Raven/Raven2/Fenghuang HDMI/DP Audio Controller
[17aa:3803]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 68
Region 0: Memory at e08c8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
03:00.2 Encryption controller [1080]: Advanced Micro Devices, Inc. [AMD] Family
17h (Models 10h-1fh) Platform Security Processor [1022:15df]
Subsystem: Lenovo Family 17h (Models 10h-1fh) Platform Security
Processor [17aa:3804]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 255
Region 2: Memory at e0700000 (32-bit, non-prefetchable) [size=1M]
Region 5: Memory at e08ce000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
03:00.3 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Raven USB 3.1
[1022:15e0] (prog-if 30 [XHCI])
Subsystem: Lenovo Raven USB 3.1 [17aa:3805]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 49
Region 0: Memory at e0600000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
03:00.4 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Raven USB 3.1
[1022:15e1] (prog-if 30 [XHCI])
Subsystem: Lenovo Raven USB 3.1 [17aa:3806]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
Region 0: Memory at e0500000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
03:00.5 Multimedia controller [0480]: Advanced Micro Devices, Inc. [AMD]
Raven/Raven2/FireFlight/Renoir Audio Processor [1022:15e2]
Subsystem: Lenovo Raven/Raven2/FireFlight/Renoir Audio Processor
[17aa:380b]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 255
Region 0: Memory at e0880000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>
03:00.6 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Family 17h
(Models 10h-1fh) HD Audio Controller [1022:15e3]
Subsystem: Lenovo Family 17h (Models 10h-1fh) HD Audio Controller
[17aa:380c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 69
Region 0: Memory at e08c0000 (32-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
03:00.7 Non-VGA unclassified device [0000]: Advanced Micro Devices, Inc. [AMD]
Raven/Raven2/Renoir Non-Sensor Fusion Hub KMDF driver [1022:15e6]
Subsystem: Advanced Micro Devices, Inc. [AMD] Raven/Raven2/Renoir
Sensor Fusion Hub [1022:15e4]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 49
Region 2: Memory at e0400000 (32-bit, non-prefetchable) [size=1M]
Region 5: Memory at e08cc000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: i2c_amd_mp2
Kernel modules: i2c_amd_mp2
** USB devices:
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 04f2:b61e Chicony Electronics Co., Ltd Integrated Camera
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 0cf3:e500 Qualcomm Atheros Communications
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: bullseye/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 5.3.0-2-amd64 (SMP w/8 CPU cores)
Kernel taint flags: TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8),
LANGUAGE=en_GB:en (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.3.0-2-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.135
ii kmod 26-3
ii linux-base 4.6
Versions of packages linux-image-5.3.0-2-amd64 recommends:
ii apparmor 2.13.3-7
ii firmware-linux-free 3.4
Versions of packages linux-image-5.3.0-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.04-4
pn linux-doc-5.3 <none>
Versions of packages linux-image-5.3.0-2-amd64 is related to:
ii firmware-amd-graphics 20190717-2
ii firmware-atheros 20190717-2
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20190717-2
ii firmware-misc-nonfree 20190717-2
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---
signature.asc
