Package: src:linux
Version: 5.18.2-1~bpo11+1
Severity: normal
X-Debbugs-Cc: nolang...@gmail.com
Dear Maintainer,
I am trying to use the cloud variant kernel to quickly spin up
a VM and run packaging jobs, including some filesystem images
for embedded systems.
Unfortunately f2fs is not available, this is a modern and popular
filesystem, and would be my first choice.
I dont see why it is not available as module in the cloud variants,
potentially could be "builtin" as compression that would allow
the VM images themself using F2FS (without initrd and modules).
Sparse images (debian OS) using F2FS with compression are 60%
the size compared with using ext4.
Regards, Norbert Lange
-- Package-specific info:
** Version:
Linux version 5.18.0-0.bpo.1-cloud-amd64 (debian-kernel@lists.debian.org)
(gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian)
2.35.2) #1 SMP PREEMPT_DYNAMIC Debian 5.18.2-1~bpo11+1 (2022-06-14)
** Command line:
initrd=\hipase_virtual\5.18.0-0.bpo.1-cloud-amd64\initrd console=tty0
console=ttyS0 root=PARTUUID=39b31ce0-33fb-42a8-9e4f-bd2adef2d810 ro quiet
** Not tainted
** Kernel log:
Unable to read kernel log; any relevant messages should be attached
** Model information
sys_vendor: QEMU
product_name: Standard PC (Q35 + ICH9, 2009)
product_version: pc-q35-7.0
chassis_vendor: QEMU
chassis_version: pc-q35-7.0
bios_vendor: EFI Development Kit II / OVMF
bios_version: 0.0.0
** Loaded modules:
nls_ascii
nls_cp437
vfat
fat
zstd
zstd_compress
zram
zsmalloc
nft_nat
evdev
serio_raw
virtio_net
efi_pstore
net_failover
virtio_console
failover
qemu_fw_cfg
button
nft_chain_nat
nf_nat
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
nf_tables
libcrc32c
nfnetlink
fuse
configfs
efivarfs
ip_tables
x_tables
autofs4
virtio_rng
rng_core
virtio_pci
virtio
virtio_pci_legacy_dev
virtio_pci_modern_dev
virtio_ring
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM
Controller [8086:29c0]
Subsystem: Red Hat, Inc. QEMU Virtual Machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 VGA compatible controller [0300]: Red Hat, Inc. QXL paravirtual graphic
card [1b36:0100] (rev 05) (prog-if 00 [VGA controller])
Subsystem: Red Hat, Inc. QEMU Virtual Machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at c4000000 (32-bit, non-prefetchable) [size=64M]
Region 1: Memory at c0000000 (32-bit, non-prefetchable) [size=64M]
Region 2: Memory at c8040000 (32-bit, non-prefetchable) [size=8K]
Region 3: I/O ports at 60e0 [size=32]
Expansion ROM at 000c0000 [disabled] [size=128K]
00:02.0 USB controller [0c03]: Red Hat, Inc. QEMU XHCI Host Controller
[1b36:000d] (rev 01) (prog-if 30 [XHCI])
Subsystem: Red Hat, Inc. QEMU XHCI Host Controller [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 800014000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [90] MSI-X: Enable- Count=16 Masked-
Vector table: BAR=0 offset=00003000
PBA: BAR=0 offset=00003800
Capabilities: [a0] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+ FLReset-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
NROPrPrP- LTR-
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt+
EETLPPrefix+, MaxEETLPPrefixes 4
EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
FRS-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
AtomicOpsCtl: ReqEn-
00:03.0 Non-Volatile memory controller [0108]: Red Hat, Inc. QEMU NVM Express
Controller [1b36:0010] (rev 02) (prog-if 02 [NVM Express])
Subsystem: Red Hat, Inc. Device [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
NUMA node: 0
Region 0: Memory at 800010000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] MSI-X: Enable+ Count=65 Masked-
Vector table: BAR=0 offset=00002000
PBA: BAR=0 offset=00003000
Capabilities: [80] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+ FLReset-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
NROPrPrP- LTR-
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt+
EETLPPrefix+, MaxEETLPPrefixes 4
EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
FRS-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
AtomicOpsCtl: ReqEn-
Kernel driver in use: nvme
00:04.0 Non-Volatile memory controller [0108]: Red Hat, Inc. QEMU NVM Express
Controller [1b36:0010] (rev 02) (prog-if 02 [NVM Express])
Subsystem: Red Hat, Inc. Device [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
NUMA node: 0
Region 0: Memory at 80000c000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] MSI-X: Enable+ Count=65 Masked-
Vector table: BAR=0 offset=00002000
PBA: BAR=0 offset=00003000
Capabilities: [80] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+ FLReset-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
NROPrPrP- LTR-
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt+
EETLPPrefix+, MaxEETLPPrefixes 4
EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
FRS-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
AtomicOpsCtl: ReqEn-
Kernel driver in use: nvme
00:05.0 Unclassified device [00ff]: Red Hat, Inc. Virtio RNG [1af4:1005]
Subsystem: Red Hat, Inc. Virtio RNG [1af4:0004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 60c0 [size=32]
Region 4: Memory at 800000000 (64-bit, prefetchable) [size=16K]
Capabilities: [84] Vendor Specific Information: VirtIO: <unknown>
BAR=0 offset=00000000 size=00000000
Capabilities: [70] Vendor Specific Information: VirtIO: Notify
BAR=4 offset=00003000 size=00001000 multiplier=00000004
Capabilities: [60] Vendor Specific Information: VirtIO: DeviceCfg
BAR=4 offset=00002000 size=00001000
Capabilities: [50] Vendor Specific Information: VirtIO: ISR
BAR=4 offset=00001000 size=00001000
Capabilities: [40] Vendor Specific Information: VirtIO: CommonCfg
BAR=4 offset=00000000 size=00001000
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci
00:06.0 Ethernet controller [0200]: Red Hat, Inc. Virtio network device
[1af4:1000]
Subsystem: Red Hat, Inc. Virtio network device [1af4:0001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 60a0 [size=32]
Region 1: Memory at c8044000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at 800004000 (64-bit, prefetchable) [size=16K]
Expansion ROM at 80000000 [disabled] [size=256K]
Capabilities: [98] MSI-X: Enable+ Count=4 Masked-
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00000800
Capabilities: [84] Vendor Specific Information: VirtIO: <unknown>
BAR=0 offset=00000000 size=00000000
Capabilities: [70] Vendor Specific Information: VirtIO: Notify
BAR=4 offset=00003000 size=00001000 multiplier=00000004
Capabilities: [60] Vendor Specific Information: VirtIO: DeviceCfg
BAR=4 offset=00002000 size=00001000
Capabilities: [50] Vendor Specific Information: VirtIO: ISR
BAR=4 offset=00001000 size=00001000
Capabilities: [40] Vendor Specific Information: VirtIO: CommonCfg
BAR=4 offset=00000000 size=00001000
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci
00:07.0 Communication controller [0780]: Red Hat, Inc. Virtio console
[1af4:1003]
Subsystem: Red Hat, Inc. Virtio console [1af4:0003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 6040 [size=64]
Region 1: Memory at c8043000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at 800008000 (64-bit, prefetchable) [size=16K]
Capabilities: [98] MSI-X: Enable+ Count=2 Masked-
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00000800
Capabilities: [84] Vendor Specific Information: VirtIO: <unknown>
BAR=0 offset=00000000 size=00000000
Capabilities: [70] Vendor Specific Information: VirtIO: Notify
BAR=4 offset=00003000 size=00001000 multiplier=00000004
Capabilities: [60] Vendor Specific Information: VirtIO: DeviceCfg
BAR=4 offset=00002000 size=00001000
Capabilities: [50] Vendor Specific Information: VirtIO: ISR
BAR=4 offset=00001000 size=00001000
Capabilities: [40] Vendor Specific Information: VirtIO: CommonCfg
BAR=4 offset=00000000 size=00001000
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface
Controller [8086:2918] (rev 02)
Subsystem: Red Hat, Inc. QEMU Virtual Machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6
port SATA Controller [AHCI mode] [8086:2922] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Red Hat, Inc. QEMU Virtual Machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 6080 [size=32]
Region 5: Memory at c8042000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller
[8086:2930] (rev 02)
Subsystem: Red Hat, Inc. QEMU Virtual Machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 6000 [size=64]
** USB devices:
not available
-- System Information:
Debian Release: 11.3
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 5.18.0-0.bpo.1-cloud-amd64 (SMP w/2 CPU threads; PREEMPT)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.18.0-0.bpo.1-cloud-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.140
ii kmod 28-1
ii linux-base 4.6
Versions of packages linux-image-5.18.0-0.bpo.1-cloud-amd64 recommends:
ii apparmor 2.13.6-10
ii firmware-linux-free 20200122-1
Versions of packages linux-image-5.18.0-0.bpo.1-cloud-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | grub-efi-amd64 | extlinux <none>
pn linux-doc-5.18 <none>
Versions of packages linux-image-5.18.0-0.bpo.1-cloud-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
