Your message dated Mon, 20 Jun 2022 18:39:31 +0200
with message-id <4423757.LvFx2qVVIh@bagend>
and subject line Re: Bug#1012100: linux-image-5.17-1: KVM LIBVIRT fails to
start, slow disk access, and a kernel thread goes wild on Intel Xeon X3430
has caused the Debian Bug report #1012100,
regarding linux-image-5.17-1: KVM LIBVIRT fails to start, slow disk access, and
a kernel thread goes wild on Intel Xeon X3430
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
1012100: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1012100
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 5.17.3-1
Severity: important
Dear Maintainer,
* What led up to the situation?
Upgrading my Debian/testing installation with apt -u dist-upgrade
* What exactly did you do (or not do) that was effective (or
ineffective)?
apt -u dist-upgrade
* What was the outcome of this action?
The new 5.17-1 kernel has several issues
* What outcome did you expect instead?
Working Linux kernel with no issues
currently in Debian/testing, the new 5.17 kernel has several issues.
My LIBVIRT KVM VM instances fail to load with this new kernel.
The disk access is slow in some programs, as for example showing the KVM VM
instances in virt-manager fails due to broken disk access.
After some hours of uptime, a kernel thread goes wild and uses 100% of the CPU.
I am also running this new kernel (5.17) on a Debian/testing VMWARE ESXI VPS
instance, at my providers place, where everything works fine. Thus this most
probably an issue with my used hardware.
My hardware is the following:
adrian@g6 ~ % inxi -F
System:
Host: g6.lan.dac Kernel: 5.16.0-6-amd64 arch: x86_64 bits: 64
Desktop: Enlightenment v: 0.25.3 Distro: Debian GNU/Linux bookworm/sid
Machine:
Type: Desktop System: HP product: ProLiant ML110 G6 v: N/A
serial: <superuser required>
Mobo: Wistron model: ProLiant ML110 G6 serial: <superuser required>
BIOS: HP v: O27 date: 08/26/2011
CPU:
Info: quad core model: Intel Xeon X3430 bits: 64 type: MCP cache:
L2: 1024 KiB
Speed (MHz): avg: 1635 min/max: 1197/2394 cores: 1: 1692 2: 1617 3: 1649
4: 1585
Graphics:
Device-1: AMD Oland GL [FirePro W2100] driver: radeon v: kernel
Display: x11 server: X.Org v: 1.21.1.3 with: Xwayland v: 22.1.0 driver:
X: loaded: radeon gpu: radeon resolution: 1920x1200
OpenGL: renderer: AMD OLAND (DRM 2.50.0 5.16.0-6-amd64 LLVM 13.0.1)
v: 4.5 Mesa 21.3.8
Audio:
Device-1: AMD Oland/Hainan/Cape Verde/Pitcairn HDMI Audio [Radeon HD 7000
Series]
driver: snd_hda_intel
Device-2: ASUSTek Xonar U1 Audio Station type: USB
driver: hid-generic,snd-usb-audio,usbhid
Sound Server-1: ALSA v: k5.16.0-6-amd64 running: yes
Sound Server-2: PipeWire v: 0.3.51 running: yes
Network:
Device-1: Broadcom NetXtreme BCM5723 Gigabit Ethernet PCIe driver: tg3
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 64:31:50:d3:c0:f8
IF-ID-1: br0 state: up speed: 1000 Mbps duplex: unknown
mac: fe:40:ab:83:94:4a
IF-ID-2: vnet0 state: unknown speed: 10 Mbps duplex: full
mac: fe:54:00:c2:24:94
IF-ID-3: vnet1 state: unknown speed: 10 Mbps duplex: full
mac: fe:54:00:bf:35:8b
IF-ID-4: vnet2 state: unknown speed: 10 Mbps duplex: full
mac: fe:54:00:25:b0:8b
IF-ID-5: vnet3 state: unknown speed: 10 Mbps duplex: full
mac: fe:54:00:4a:c8:69
Drives:
Local Storage: total: 11.79 TiB used: 5.87 TiB (49.8%)
ID-1: /dev/sda vendor: Toshiba model: Q300 size: 447.13 GiB
ID-2: /dev/sdb vendor: A-Data model: SP550 size: 447.13 GiB
ID-3: /dev/sdc vendor: Toshiba model: HDWE140 size: 3.64 TiB
ID-4: /dev/sdd vendor: Toshiba model: MG06ACA800E size: 7.28 TiB
Partition:
ID-1: / size: 437.53 GiB used: 91.98 GiB (21.0%) fs: ext4 dev: /dev/sda3
ID-2: /boot size: 1.2 GiB used: 272.2 MiB (22.2%) fs: ext4 dev: /dev/sda1
ID-3: /home size: 3.64 TiB used: 1.76 TiB (48.4%) fs: btrfs
dev: /dev/sdc1
Swap:
ID-1: swap-1 type: partition size: 46.66 GiB used: 139.5 MiB (0.3%)
dev: /dev/sdb2
Sensors:
Permissions: Unable to run ipmi sensors. Root privileges required.
System Temperatures: cpu: 49.0 C mobo: N/A gpu: radeon temp: 39.0 C
Fan Speeds (RPM): N/A
Info:
Processes: 410 Uptime: 1h 1m Memory: 15.62 GiB used: 9.43 GiB (60.4%)
Shell: Zsh inxi: 3.3.16
Thank you very much, for your kind attention.
Sincerely,
Adrian Kiess
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: HP
product_name: ProLiant ML110 G6
product_version:
chassis_vendor: HP
chassis_version: N/A
bios_vendor: HP
bios_version: O27
board_vendor: Wistron Corporation
board_name: ProLiant ML110 G6
board_version:
** Network interface configuration:
*** /etc/network/interfaces:
auto lo
iface lo inet loopback
auto eth0
allow-hotplug eth0
iface eth0 inet manual
iface eth0 inet6 manual
auto br0
allow-hotplug br0
iface br0 inet static
bridge_ports eth0
address 192.168.0.3/16
broadcast 192.168.255.255
gateway 192.168.0.1
dns-nameservers 127.0.0.1
dns-search lan.dac
post-up /sbin/brctl setfd br0 0 addif br0 eth0
auto br0:0
allow-hotplug br0:0
iface br0:0 inet static
address 192.168.122.1/16
broadcast 192.168.255.255
dns-nameservers 127.0.0.1
dns-search v-zone.lan.dac
auto br0:1
allow-hotplug br0:1
iface br0:1 inet6 static
address FC00:0000:0000:0000:0000:0000:0000:0003
dns-nameservers ::1
netmask 64
auto br0:2
allow-hotplug br0:2
iface br0:2 inet6 auto
auto br0:3
allow-hotplug br0:3
iface br0:3 inet6 static
address FC00:0000:0000:0000:0122:0000:0000:0001
dns-nameservers ::1
netmask 64
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d130]
(rev 11)
Subsystem: Hewlett-Packard Company Core Processor DMI [103c:3318]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
IOMMU group: 0
Capabilities: <access denied>
00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root
Port 1 [8086:d138] (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 29
IOMMU group: 1
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff [size=4K]
Memory behind bridge: d1900000-d19fffff [size=1M]
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
[size=256M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:08.0 System peripheral [0880]: Intel Corporation Core Processor System
Management Registers [8086:d155] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
IOMMU group: 2
Capabilities: <access denied>
00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore
and Scratchpad Registers [8086:d156] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
IOMMU group: 3
Capabilities: <access denied>
00:08.2 System peripheral [0880]: Intel Corporation Core Processor System
Control and Status Registers [8086:d157] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
IOMMU group: 4
Capabilities: <access denied>
00:08.3 System peripheral [0880]: Intel Corporation Core Processor
Miscellaneous Registers [8086:d158] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
IOMMU group: 5
00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link
[8086:d150] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
IOMMU group: 6
00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing
and Protocol Registers [8086:d151] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
IOMMU group: 6
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company 5 Series/3400 Series Chipset USB2
Enhanced Host Controller [103c:3118]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
IOMMU group: 7
Region 0: Memory at d1e02000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode])
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
IOMMU group: 8
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
I/O behind bridge: 00003000-00003fff [size=4K]
Memory behind bridge: d1b00000-d1bfffff [size=1M]
Prefetchable memory behind bridge: 00000000d1c00000-00000000d1dfffff
[size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 2 [8086:3b44] (rev 05) (prog-if 00 [Normal decode])
Physical Slot: 1
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 16
IOMMU group: 9
Bus: primary=00, secondary=1a, subordinate=1a, sec-latency=0
I/O behind bridge: 00004000-00004fff [size=4K]
Memory behind bridge: d1f00000-d20fffff [size=2M]
Prefetchable memory behind bridge: 00000000d2100000-00000000d22fffff
[size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 3 [8086:3b46] (rev 05) (prog-if 00 [Normal decode])
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
IOMMU group: 10
Bus: primary=00, secondary=1c, subordinate=1c, sec-latency=0
I/O behind bridge: 00005000-00005fff [size=4K]
Memory behind bridge: d1000000-d18fffff [size=9M]
Prefetchable memory behind bridge: 00000000d0000000-00000000d0ffffff
[size=16M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 4 [8086:3b48] (rev 05) (prog-if 00 [Normal decode])
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 19
IOMMU group: 11
Bus: primary=00, secondary=1e, subordinate=1e, sec-latency=0
I/O behind bridge: 00006000-00006fff [size=4K]
Memory behind bridge: d1a00000-d1afffff [size=1M]
Prefetchable memory behind bridge: 00000000d2300000-00000000d24fffff
[size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 5 [8086:3b4a] (rev 05) (prog-if 00 [Normal decode])
Physical Slot: 1
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
IOMMU group: 12
Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
I/O behind bridge: 00007000-00007fff [size=4K]
Memory behind bridge: d2500000-d26fffff [size=2M]
Prefetchable memory behind bridge: 00000000d2700000-00000000d28fffff
[size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company 5 Series/3400 Series Chipset USB2
Enhanced Host Controller [103c:3118]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
IOMMU group: 13
Region 0: Memory at d1e03000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 14
Bus: primary=00, secondary=30, subordinate=30, sec-latency=32
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 3420 Chipset LPC Interface
Controller [8086:3b14] (rev 05)
Subsystem: Hewlett-Packard Company 3420 Chipset LPC Interface
Controller [103c:3118]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 15
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset
6 port SATA AHCI Controller [8086:3b22] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company 5 Series/3400 Series Chipset 6 port
SATA AHCI Controller [103c:3118]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 30
IOMMU group: 15
Region 0: I/O ports at 1830 [size=8]
Region 1: I/O ports at 1824 [size=4]
Region 2: I/O ports at 1828 [size=8]
Region 3: I/O ports at 1820 [size=4]
Region 4: I/O ports at 1800 [size=32]
Region 5: Memory at d1e04000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus
Controller [8086:3b30] (rev 05)
Subsystem: Hewlett-Packard Company 5 Series/3400 Series Chipset SMBus
Controller [103c:3318]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
IOMMU group: 15
Region 0: Memory at d1e05000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Oland GL [FirePro W2100] [1002:6608] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Oland GL [FirePro W2100] [103c:2120]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 31
IOMMU group: 16
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at d1900000 (64-bit, non-prefetchable) [size=256K]
Region 4: I/O ports at 2000 [size=256]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon, amdgpu
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI]
Oland/Hainan/Cape Verde/Pitcairn HDMI Audio [Radeon HD 7000 Series] [1002:aab0]
Subsystem: Hewlett-Packard Company Oland/Hainan/Cape Verde/Pitcairn
HDMI Audio [Radeon HD 7000 Series] [103c:aab0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 37
IOMMU group: 16
Region 0: Memory at d1940000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
10:00.0 USB controller [0c03]: Renesas Technology Corp. uPD720202 USB 3.0 Host
Controller [1912:0015] (rev 02) (prog-if 30 [XHCI])
Subsystem: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller
[1912:0015]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
IOMMU group: 17
Region 0: Memory at d1b00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
1e:00.0 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme
BCM5723 Gigabit Ethernet PCIe [14e4:165b] (rev 10)
Subsystem: Hewlett-Packard Company NC107i Integrated PCI Express
Gigabit Server Adapter [103c:705d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 38
IOMMU group: 18
Region 0: Memory at d1a00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
** USB devices:
Bus 003 Device 003: ID 0000:0000 ServerEngines SE USB Device
Bus 003 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 05e3:0612 Genesys Logic, Inc. Hub
Bus 004 Device 002: ID 05e3:0620 Genesys Logic, Inc. GL3523 Hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 003: ID 03f0:154a HP, Inc Laser Mouse
Bus 002 Device 002: ID 05e3:0610 Genesys Logic, Inc. Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0b05:1743 ASUSTek Computer, Inc. Xonar U1 Audio Station
Bus 001 Device 003: ID 03f0:104a HP, Inc HP USB Smartcard CCID Keyboard
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: bookworm/sid
APT prefers testing
APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 5.16.0-6-amd64 (SMP w/4 CPU threads; PREEMPT)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.17.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.141
ii kmod 29-1
ii linux-base 4.9
Versions of packages linux-image-5.17.0-1-amd64 recommends:
ii apparmor 3.0.4-2
ii firmware-linux-free 20200122-1
Versions of packages linux-image-5.17.0-1-amd64 suggests:
ii debian-kernel-handbook 1.0.19
ii extlinux 3:6.04~git20190206.bf6db5b4+dfsg1-3+b1
ii grub-pc 2.04-20
pn linux-doc-5.17 <none>
Versions of packages linux-image-5.17.0-1-amd64 is related to:
ii firmware-amd-graphics 20210818-1
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20210818-1
ii firmware-misc-nonfree 20210818-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20210818-1
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---
--- Begin Message ---
Version: linux/5.18.2-1
On Monday, 20 June 2022 17:19:36 CEST Adrian Kieß wrote:
> the new kernel:
>
> root@g6 /opt # uname -a
> Linux g6.lan.dac 5.18.0-1-amd64 #1 SMP PREEMPT_DYNAMIC Debian 5.18.2-1
> (2022-06-06) x86_64 GNU/Linux
>
> in Debian/testing works again in the way, that LIBVIRT KVM works again!
Excellent! Closing this bug with that version then. Thanks for reporting back.
> I most probably found the reason for the slow disk access on my machine:
>
> Please see this new bug report:
>
> Debian Bug report logs - #1013260
> coreutils: /bin/chown very slow in conjunction with storebackup
>
> https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1013260
I look a quick look at that bug and I would suggest to try if a 'chown'
operation on some file (can be a temp file), also takes that long.
Both the Debian package and upstream of storebackup doesn't look too healthy
to me (Debian package hasn't had a real update in 10 years), so it seems
worthwhile to verify whether the issue also occurs outside storebackup.
Also, coreutils was last updated 7 months ago and I got the impression the
problems are (far) more recent. Often times a new problem coincides with a new
program version.
> Thank you very much for your answer!
You're welcome and good luck!
signature.asc
Description: This is a digitally signed message part.
--- End Message ---
