Package: linux-image-2.6.12-1-k7
Version: 2.6.12-10
Severity: critical
Justification: breaks the whole system
Kernel hangs at boot after failing to init iop0:
...
iop0: get status timeout
iop0: reset rejected trying to clear
iop0: unable to clear (status=0xbe)
i2o controller probe failed err -110
[hang]
The very same system boots fine under 2.6.8, where it uses dpti instead
of iop. The dpti driver on 2.6.12 looks like it issues the same messages
as it does under 2.6.8 (suggests that it is working properly), but
apparently iop steps in shortly thereafter and tries (unsuccessfully) to
take over.
My dmesg from 2.6.8:
...
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
ACPI: PCI interrupt 0000:00:0b.1[A] -> GSI 19 (level, low) -> IRQ 185
Adaptec I2O RAID controller 0 at f887f000 size=100000 irq=185
dpti: If you have a lot of devices this could take a few minutes.
dpti0: Reading the hardware resource table.
TID 008 Vendor: ADAPTEC Device: AIC-7899 Rev: 00000001
TID 009 Vendor: ADAPTEC Device: AIC-7899 Rev: 00000001
TID 010 Vendor: ADAPTEC Device: AIC-7899 Rev: 00000001
TID 011 Vendor: ADAPTEC Device: AIC-7899 Rev: 00000001
TID 518 Vendor: IBM Device: DDYS-T18350N Rev: SA2A
TID 523 Vendor: ADAPTEC Device: RAID-5 Rev: 370F
scsi2 : Vendor: Adaptec Model: 3410S FW:370F
Vendor: IBM Model: DDYS-T18350N Rev: SA2A
Type: Direct-Access ANSI SCSI revision: 03
Vendor: ADAPTEC Model: RAID-5 Rev: 370F
Type: Direct-Access ANSI SCSI revision: 02
A grep for "iop0" in my 2.6.8 dmesg produces no results.
I don't have a dmesg for 2.6.12, since the system won't boot. :)
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.8-2-k7
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Versions of packages linux-image-2.6.12-1-k7 depends on:
ii coreutils [fileutils] 5.2.1-2.1 The GNU core utilities
ii initrd-tools 0.1.84 tools to create initrd image for p
ii module-init-tools 3.2-pre9-2 tools for managing Linux kernel mo
linux-image-2.6.12-1-k7 recommends no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
