--- Begin Message ---
Package: src:linux
Version: 5.17.6-1+b1
Severity: normal
Dear Maintainer,
I have a Debian Sid box running some KVM/QEMU guests and ever since the
upgrade to 5.17 it is kernel panicing fairly reliably whenever I reboot
the guest VMs on it. This is happening under both 5.17.3 and 5.17.6.
[420450.562966] BUG: kernel NULL pointer dereference, address: 000000000000000b
[420450.586155] #PF: supervisor write access in kernel mode
[420450.603615] #PF: error_code(0x0002) - not-present page
[420450.620787] PGD 0 P4D 0
[420450.629381] Oops: 0002 [#1] PREEMPT SMP PTI
[420450.643410] CPU: 23 PID: 93711 Comm: qemu-system-x86 Kdump: loaded Not
tainted 5.17.0-2-amd64 #1 Debian 5.17.6-1
[420450.677460] Hardware name: Intel Corporation T5520UR/T5520UR, BIOS
S5500.86B.01.00.0061.030920121535 03/09/2012
[420450.710936] RIP: 0010:kvm_replace_memslot+0xcf/0x390 [kvm]
[420450.729338] Code: 44 24 08 48 85 db 0f 84 3b 02 00 00 48 89 ea 48 c1 e2 04
48 01 da 48 8b 4a 08 48 85 c9 74 1e 48 8b 32 48 89 31 48 85 f6 74 04 <48> 89 4e
08 48 c7 02 00 00 00 00 48 c7 42 08 00 00 00 00 48 8d 54
[420450.791413] RSP: 0018:ffffad89c683fd70 EFLAGS: 00010206
[420450.808873] RAX: ffffad89c6a19058 RBX: ffff8b77f553b400 RCX:
ffffad89c6a19110
[420450.832622] RDX: ffff8b77f553b400 RSI: 0000000000000003 RDI:
ffffad89c6a19000
[420450.856371] RBP: 0000000000000000 R08: 0000000000000000 R09:
0000000000000000
[420450.880122] R10: 0000000000000001 R11: 0000000000000000 R12:
ffff8b77f553b200
[420450.903874] R13: 0000000000000000 R14: 0000000000000000 R15:
ffffad89c6a19000
[420450.927626] FS: 00007f46eff3c640(0000) GS:ffff8b7dd7cc0000(0000)
knlGS:0000000000000000
[420450.954525] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[420450.973699] CR2: 000000000000000b CR3: 00000001085ea005 CR4:
00000000000226e0
[420450.997452] Call Trace:
[420451.005762] <TASK>
[420451.012925] ? kmem_cache_alloc_trace+0x175/0x3e0
[420451.028676] kvm_set_memslot+0x2fe/0x490 [kvm]
[420451.043622] kvm_vm_ioctl+0x2cb/0xd80 [kvm]
[420451.057714] ? handle_mm_fault+0xb2/0x280
[420451.071175] __x64_sys_ioctl+0x82/0xb0
[420451.083775] do_syscall_64+0x3b/0xc0
[420451.095805] entry_SYSCALL_64_after_hwframe+0x44/0xae
[420451.112696] RIP: 0033:0x7f46f6b13397
[420451.124723] Code: 3c 1c e8 1c ff ff ff 85 c0 79 87 49 c7 c4 ff ff ff ff 5b
5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 8b 0d a9 da 0d 00 f7 d8 64 89 01 48
[420451.186798] RSP: 002b:00007f46eff3af68 EFLAGS: 00000246 ORIG_RAX:
0000000000000010
[420451.211981] RAX: ffffffffffffffda RBX: 000000004020ae46 RCX:
00007f46f6b13397
[420451.235732] RDX: 00007f46eff3b030 RSI: 000000004020ae46 RDI:
000000000000000c
[420451.259482] RBP: 000055b038bce1f0 R08: 0000000000000000 R09:
00000000000c0000
[420451.283234] R10: 00000000000c0000 R11: 0000000000000246 R12:
00007f46eff3b030
[420451.306984] R13: 000000007ff40000 R14: 000055b038b69460 R15:
00000000000c0000
[420451.330738] </TASK>
[420451.338184] Modules linked in: cpuid rpcsec_gss_krb5 nfsv4 dns_resolver
nf_conntrack_netlink xfrm_user xfrm_algo br_netfilter bridge stp llc overlay
autofs4 ip6_tables ip6t_rpfilter nft_chain_nat xt_MASQUERADE nf_nat xt_addrtype
ip_tables xt_state xt_conntrack ipt_REJECT nf_reject_ipv4 nf_conntrack_tftp
nf_conntrack_ftp xt_tcpudp ipt_rpfilter xt_CT nf_conntrack nf_defrag_ipv6
nf_defrag_ipv4 nft_compat nf_tables x_tables nfnetlink nfsd auth_rpcgss nfs_acl
nfs lockd grace fscache netfs sunrpc jc42 vhost_vsock
vmw_vsock_virtio_transport_common vsock vhost_net tun vhost vhost_iotlb tap
ipmi_watchdog nbd squashfs loop dm_crypt dm_mod intel_powerclamp coretemp
ipmi_ssif kvm_intel kvm irqbypass ghash_clmulni_intel mgag200 drm_shmem_helper
drm_kms_helper aesni_intel cec crypto_simd rc_core cryptd acpi_ipmi iTCO_wdt
intel_pmc_bxt intel_cstate ipmi_si drm iTCO_vendor_support evdev sg
intel_uncore ipmi_devintf watchdog ioatdma i7core_edac i5500_temp
ipmi_msghandler button acpi_cpufreq xfs
[420451.338279] libcrc32c crc32c_generic hid_generic usbhid hid uas
ata_generic usb_storage ses sd_mod enclosure t10_pi scsi_transport_sas
crc_t10dif ata_piix crct10dif_generic uhci_hcd ehci_pci libata igb megaraid_sas
ehci_hcd i2c_algo_bit crct10dif_pclmul dca crct10dif_common i2c_i801 usbcore
scsi_mod ptp crc32_pclmul crc32c_intel i2c_smbus lpc_ich scsi_common usb_common
pps_core
[420451.734448] CR2: 000000000000000b
-- Package-specific info:
** Version:
Linux version 5.17.0-2-amd64 (debian-kernel@lists.debian.org) (gcc-11 (Debian
11.3.0-1) 11.3.0, GNU ld (GNU Binutils for Debian) 2.38) #1 SMP PREEMPT Debian
5.17.6-1 (2022-05-14)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-5.17.0-2-amd64 root=/dev/sda1 ro console=ttyS0,38400n8
UUID=43a6b5ff-7af0-440e-9a9c-3c3a5a6d96fc lockdown=integrity crashkernel=384M
** Not tainted
** Kernel log:
[ 16.398935] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 20.784872] SGI XFS with ACLs, security attributes, realtime, quota, no
debug enabled
[ 20.815021] XFS (sda1): Mounting V5 Filesystem
[ 20.857819] XFS (sda1): Ending clean mount
[ 20.923094] Not activating Mandatory Access Control as /sbin/tomoyo-init
does not exist.
[ 21.216157] pstore: crypto_comp_decompress failed, ret = -22!
[ 21.240145] pstore: crypto_comp_decompress failed, ret = -22!
[ 21.636592] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 21.675493] IPMI message handler: version 39.2
[ 21.677308] ACPI: button: Sleep Button [SLPB]
[ 21.706917] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 21.731323] ACPI: button: Power Button [PWRF]
[ 21.746573] ses 0:0:6:0: Attached scsi generic sg0 type 13
[ 21.747183] EDAC MC1: Giving out device to module i7core_edac.c controller
i7 core #1: DEV 0000:fe:03.0 (INTERRUPT)
[ 21.764754] sd 0:2:0:0: Attached scsi generic sg1 type 0
[ 21.799009] EDAC PCI0: Giving out device to module i7core_edac controller
EDAC PCI controller: DEV 0000:fe:03.0 (POLLED)
[ 21.816550] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 21.852387] EDAC MC0: Giving out device to module i7core_edac.c controller
i7 core #0: DEV 0000:ff:03.0 (INTERRUPT)
[ 21.904024] EDAC PCI1: Giving out device to module i7core_edac controller
EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[ 21.939815] EDAC i7core: Driver loaded, 2 memory controller(s) found.
[ 21.962356] ipmi device interface
[ 21.973527] ioatdma: Intel(R) QuickData Technology Driver 5.00
[ 22.007805] igb 0000:01:00.0: DCA enabled
[ 22.021073] igb 0000:01:00.1: DCA enabled
[ 22.035045] iTCO_vendor_support: vendor-support=0
[ 22.049641] igb 0000:05:00.0: DCA enabled
[ 22.063723] igb 0000:05:00.1: DCA enabled
[ 22.093633] igb 0000:05:00.2: DCA enabled
[ 22.106855] igb 0000:05:00.3: DCA enabled
[ 22.128296] ipmi_si: IPMI System Interface driver
[ 22.128686] random: crng init done
[ 22.143802] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
[ 22.175837] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 22.175841] ipmi_si: Adding SMBIOS-specified kcs state machine
[ 22.175936] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI
[ 22.238381] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1
spacing 1 irq 0
[ 22.240812] ACPI: bus type drm_connector registered
[ 22.283357] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device
disabled by hardware/BIOS
[ 22.314557] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state
machine in favor of ACPI
[ 22.343183] ipmi_si: Adding ACPI-specified kcs state machine
[ 22.343262] ipmi_si: Trying ACPI-specified kcs state machine at i/o address
0xca2, slave address 0x20, irq 0
[ 22.433518] cryptd: max_cpu_qlen set to 1000
[ 22.478336] SSE version of gcm_enc/dec engaged.
[ 22.505414] mgag200 0000:0e:00.0: vgaarb: deactivate vga console
[ 22.526435] Console: switching to colour dummy device 80x25
[ 22.548948] [drm] Initialized mgag200 1.0.0 20110418 for 0000:0e:00.0 on
minor 0
[ 22.575344] fbcon: mgag200drmfb (fb0) is primary device
[ 22.577480] mgag200 0000:0e:00.0: [drm] drm_plane_enable_fb_damage_clips()
not called
[ 22.690003] Console: switching to colour frame buffer device 128x48
[ 22.737791] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id:
0x000157, prod_id: 0x003e, dev_id: 0x21)
[ 22.747186] mgag200 0000:0e:00.0: [drm] fb0: mgag200drmfb frame buffer device
[ 23.107278] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly.
Using workaround
[ 23.143039] ipmi_si IPI0001:00: IPMI kcs interface initialized
[ 23.242628] ipmi_ssif: IPMI SSIF Interface driver
[ 24.142760] xfs filesystem being remounted at / supports timestamps until
2038 (0x7fffffff)
[ 24.388329] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled.
Duplicate IMA measurements will not be recorded in the IMA log.
[ 24.428443] device-mapper: uevent: version 1.0.3
[ 24.443885] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised:
dm-de...@redhat.com
[ 24.820468] loop: module loaded
[ 24.840711] XFS (sda2): Mounting V5 Filesystem
[ 24.857033] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 24.916979] IPMI Watchdog: driver initialized
[ 24.963223] tun: Universal TUN/TAP device driver, 1.6
[ 24.998627] NET: Registered PF_VSOCK protocol family
[ 25.058469] XFS (sda2): Starting recovery (logdev: internal)
[ 25.105873] XFS (sda2): Ending recovery (logdev: internal)
[ 25.127971] xfs filesystem being mounted at /var supports timestamps until
2038 (0x7fffffff)
[ 25.157956] XFS (sda4): Mounting V5 Filesystem
[ 25.205058] XFS (sda4): Starting recovery (logdev: internal)
[ 25.241673] XFS (sda4): Ending recovery (logdev: internal)
[ 25.264553] xfs filesystem being mounted at /home supports timestamps until
2038 (0x7fffffff)
[ 25.335482] Adding 5119996k swap on /dev/mapper/swap. Priority:-2 extents:1
across:5119996k FS
[ 25.493591] audit: type=1400 audit(1652805030.795:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="klogd" pid=1453
comm="apparmor_parser"
[ 25.541755] audit: type=1400 audit(1652805030.795:3): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1450
comm="apparmor_parser"
[ 25.596945] audit: type=1400 audit(1652805030.795:4): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod"
pid=1450 comm="apparmor_parser"
[ 25.653861] audit: type=1400 audit(1652805030.795:5): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="lsb_release" pid=1449
comm="apparmor_parser"
[ 25.703395] audit: type=1400 audit(1652805030.795:6): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1457
comm="apparmor_parser"
[ 25.753229] audit: type=1400 audit(1652805030.795:7): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_filter" pid=1457
comm="apparmor_parser"
[ 25.802478] audit: type=1400 audit(1652805030.795:8): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_groff" pid=1457
comm="apparmor_parser"
[ 25.851461] audit: type=1400 audit(1652805030.799:9): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/sbin/inspircd"
pid=1466 comm="apparmor_parser"
[ 25.903005] audit: type=1400 audit(1652805030.803:10): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="avahi-daemon" pid=1463
comm="apparmor_parser"
[ 25.953117] audit: type=1400 audit(1652805030.803:11): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nscd" pid=1470
comm="apparmor_parser"
[ 28.849797] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full
Duplex, Flow Control: RX/TX
[ 28.880942] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 31.013043] RPC: Registered named UNIX socket transport module.
[ 31.032520] RPC: Registered udp transport module.
[ 31.047985] RPC: Registered tcp transport module.
[ 31.063446] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 31.148517] FS-Cache: Loaded
[ 31.439769] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 34.223260] bridge: filtering via arp/ip/ip6tables is no longer available by
default. Update your scripts to load br_netfilter if you need this.
[ 34.271988] Bridge firewalling registered
[ 34.359008] Initializing XFRM netlink socket
[ 544.585780] L1TF CPU bug present and SMT on, data leak possible. See
CVE-2018-3646 and
https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for
details.
[ 860.962526] Lockdown: crash: /dev/mem,kmem,port is restricted; see man
kernel_lockdown.7
[ 902.462769] Lockdown: crash: /dev/mem,kmem,port is restricted; see man
kernel_lockdown.7
[ 1549.037491] perf: interrupt took too long (2512 > 2500), lowering
kernel.perf_event_max_sample_rate to 79500
[ 1893.309440] perf: interrupt took too long (3160 > 3140), lowering
kernel.perf_event_max_sample_rate to 63250
[ 2415.097971] Lockdown: crash: /dev/mem,kmem,port is restricted; see man
kernel_lockdown.7
[10395.035861] perf: interrupt took too long (3957 > 3950), lowering
kernel.perf_event_max_sample_rate to 50500
** Model information
sys_vendor: Intel Corporation
product_name: T5520UR
product_version: ....................
chassis_vendor: NSN2U
chassis_version: APS2100
bios_vendor: Intel Corp.
bios_version: S5500.86B.01.00.0061.030920121535
board_vendor: Intel Corporation
board_name: T5520UR
board_version: E24717-751
** Loaded modules:
nf_conntrack_netlink
xfrm_user
xfrm_algo
br_netfilter
bridge
stp
llc
overlay
autofs4
ip6_tables
ip6t_rpfilter
nft_chain_nat
xt_MASQUERADE
nf_nat
xt_addrtype
ip_tables
xt_state
xt_conntrack
ipt_REJECT
nf_reject_ipv4
nf_conntrack_tftp
nf_conntrack_ftp
xt_tcpudp
ipt_rpfilter
xt_CT
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
nft_compat
nf_tables
x_tables
nfnetlink
nfsd
auth_rpcgss
nfs_acl
nfs
lockd
grace
fscache
netfs
sunrpc
jc42
vhost_vsock
vmw_vsock_virtio_transport_common
vsock
vhost_net
tun
vhost
vhost_iotlb
tap
ipmi_watchdog
nbd
squashfs
loop
dm_crypt
dm_mod
intel_powerclamp
coretemp
ipmi_ssif
kvm_intel
kvm
irqbypass
ghash_clmulni_intel
mgag200
drm_shmem_helper
aesni_intel
drm_kms_helper
crypto_simd
cec
cryptd
rc_core
iTCO_wdt
acpi_ipmi
intel_cstate
intel_pmc_bxt
ipmi_si
iTCO_vendor_support
evdev
drm
ipmi_devintf
intel_uncore
watchdog
ioatdma
sg
i7core_edac
i5500_temp
ipmi_msghandler
button
acpi_cpufreq
xfs
libcrc32c
crc32c_generic
hid_generic
usbhid
hid
uas
usb_storage
sd_mod
ses
t10_pi
enclosure
crc_t10dif
ata_generic
scsi_transport_sas
crct10dif_generic
ata_piix
igb
uhci_hcd
ehci_pci
i2c_algo_bit
megaraid_sas
libata
ehci_hcd
dca
crct10dif_pclmul
crct10dif_common
i2c_i801
ptp
usbcore
scsi_mod
crc32_pclmul
crc32c_intel
lpc_ich
i2c_smbus
scsi_common
usb_common
pps_core
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5520 I/O Hub to ESI Port
[8086:3406] (rev 22)
Subsystem: Intel Corporation 5520 I/O Hub to ESI Port [8086:34de]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 1 [8086:3408] (rev 22) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff [size=4K]
Memory behind bridge: b1d00000-b1dfffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 3 [8086:340a] (rev 22) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 PCI bridge [0604]: Intel Corporation 5520/X58 I/O Hub PCI Express Root
Port 5 [8086:340c] (rev 22) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Bus: primary=00, secondary=03, subordinate=06, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: b1a00000-b1cfffff [size=3M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 7 [8086:340e] (rev 22) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
Bus: primary=00, secondary=07, subordinate=0a, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:09.0 PCI bridge [0604]: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI
Express Root Port 9 [8086:3410] (rev 22) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 33
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0a.0 PCI bridge [0604]: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI
Express Root Port 10 [8086:3411] (rev 22) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 35
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:10.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Physical and Link
Layer Registers Port 0 [8086:3425] (rev 22) (prog-if 00 [8259])
Subsystem: Device [0086:00de]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:10.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Routing and Protocol
Layer Registers Port 0 [8086:3426] (rev 22) (prog-if 00 [8259])
Subsystem: Device [0086:00de]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:11.0 PIC [0800]: Intel Corporation 7500/5520/5500 Physical and Link Layer
Registers Port 1 [8086:3427] (rev 22) (prog-if 00 [8259])
Subsystem: Device [0086:00de]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:11.1 PIC [0800]: Intel Corporation 7500/5520/5500 Routing & Protocol Layer
Register Port 1 [8086:3428] (rev 22) (prog-if 00 [8259])
Subsystem: Device [0086:00de]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:13.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub I/OxAPIC
Interrupt Controller [8086:342d] (rev 22) (prog-if 20 [IO(X)-APIC])
Subsystem: Device [0086:00de]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at b1e23000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub System
Management Registers [8086:342e] (rev 22) (prog-if 00 [8259])
Subsystem: Device [0086:00de]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: i7core_edac
Kernel modules: i7core_edac
00:14.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and
Scratch Pad Registers [8086:3422] (rev 22) (prog-if 00 [8259])
Subsystem: Device [0086:00de]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.2 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status
and RAS Registers [8086:3423] (rev 22) (prog-if 00 [8259])
Subsystem: Device [0086:00de]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.3 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Throttle
Registers [8086:3438] (rev 22) (prog-if 00 [8259])
Subsystem: Device [0086:00de]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: i5500_temp
Kernel modules: i5500_temp
00:15.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Trusted Execution
Technology Registers [8086:342f] (rev 22) (prog-if 20 [IO(X)-APIC])
Subsystem: Device [0086:00de]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:16.0 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device [8086:3430] (rev 22)
Subsystem: Intel Corporation 5520/5500/X58 Chipset QuickData Technology
Device [8086:34de]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 101
Region 0: Memory at b1e00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ioatdma
Kernel modules: ioatdma
00:16.1 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device [8086:3431] (rev 22)
Subsystem: Intel Corporation 5520/5500/X58 Chipset QuickData Technology
Device [8086:34de]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 103
Region 0: Memory at b1e04000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ioatdma
Kernel modules: ioatdma
00:16.2 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device [8086:3432] (rev 22)
Subsystem: Intel Corporation 5520/5500/X58 Chipset QuickData Technology
Device [8086:34de]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 105
Region 0: Memory at b1e08000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ioatdma
Kernel modules: ioatdma
00:16.3 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device [8086:3433] (rev 22)
Subsystem: Intel Corporation 5520/5500/X58 Chipset QuickData Technology
Device [8086:34de]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 107
Region 0: Memory at b1e0c000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ioatdma
Kernel modules: ioatdma
00:16.4 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device [8086:3429] (rev 22)
Subsystem: Intel Corporation 5520/5500/X58 Chipset QuickData Technology
Device [8086:34de]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 101
Region 0: Memory at b1e10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ioatdma
Kernel modules: ioatdma
00:16.5 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device [8086:342a] (rev 22)
Subsystem: Intel Corporation 5520/5500/X58 Chipset QuickData Technology
Device [8086:34de]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 103
Region 0: Memory at b1e14000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ioatdma
Kernel modules: ioatdma
00:16.6 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device [8086:342b] (rev 22)
Subsystem: Intel Corporation 5520/5500/X58 Chipset QuickData Technology
Device [8086:34de]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 105
Region 0: Memory at b1e18000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ioatdma
Kernel modules: ioatdma
00:16.7 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device [8086:342c] (rev 22)
Subsystem: Intel Corporation 5520/5500/X58 Chipset QuickData Technology
Device [8086:34de]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 107
Region 0: Memory at b1e1c000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ioatdma
Kernel modules: ioatdma
00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller
[8086:34de]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 30c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller
[8086:34de]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 30a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller
[8086:34de]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 3080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI
Controller [8086:34de]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at b1e21000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 36
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
I/O behind bridge: 00001000-00001fff [size=4K]
Memory behind bridge: b1900000-b19fffff [size=1M]
Prefetchable memory behind bridge: 00000000b1f00000-00000000b20fffff
[size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 37
Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0
I/O behind bridge: 00004000-00004fff [size=4K]
Memory behind bridge: b1000000-b18fffff [size=9M]
Prefetchable memory behind bridge: 00000000b0000000-00000000b0ffffff
[size=16M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller
[8086:34de]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 3060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller
[8086:34de]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 3040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller
[8086:34de]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 3020 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI
Controller [8086:34de]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 0: Memory at b1e20000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0f, subordinate=0f, sec-latency=32
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface
Controller [8086:3a16]
Subsystem: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
[8086:34de]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port
SATA IDE Controller #1 [8086:3a20] (prog-if 8f [PCI native mode controller,
supports both channels switched to ISA compatibility mode, supports bus
mastering])
Subsystem: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE
Controller [8086:34de]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 0: I/O ports at 3138 [size=8]
Region 1: I/O ports at 314c [size=4]
Region 2: I/O ports at 3130 [size=8]
Region 3: I/O ports at 3148 [size=4]
Region 4: I/O ports at 3110 [size=16]
Region 5: I/O ports at 3100 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
[8086:3a30]
Subsystem: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
[8086:34de]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: Memory at b1e22000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port
SATA IDE Controller #2 [8086:3a26] (prog-if 85 [PCI native mode-only
controller, supports bus mastering])
Subsystem: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE
Controller [8086:34de]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 21
Region 0: I/O ports at 3128 [size=8]
Region 1: I/O ports at 3144 [size=4]
Region 2: I/O ports at 3120 [size=8]
Region 3: I/O ports at 3140 [size=4]
Region 4: I/O ports at 30f0 [size=16]
Region 5: I/O ports at 30e0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
01:00.0 Ethernet controller [0200]: Intel Corporation 82575EB Gigabit Network
Connection [8086:10a7] (rev 02)
Subsystem: Intel Corporation 82575EB Gigabit Network Connection
[8086:34de]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 43
Region 0: Memory at b1d20000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 2020 [size=32]
Region 3: Memory at b1d44000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
Kernel modules: igb
01:00.1 Ethernet controller [0200]: Intel Corporation 82575EB Gigabit Network
Connection [8086:10a7] (rev 02)
Subsystem: Intel Corporation 82575EB Gigabit Network Connection
[8086:34de]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Region 0: Memory at b1d00000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 2000 [size=32]
Region 3: Memory at b1d40000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
Kernel modules: igb
03:00.0 PCI bridge [0604]: Microsemi / PMC / IDT PES24T3G2 PCI Express Gen2
Switch [111d:806a] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=03, secondary=04, subordinate=06, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: b1a00000-b1cfffff [size=3M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
04:02.0 PCI bridge [0604]: Microsemi / PMC / IDT PES24T3G2 PCI Express Gen2
Switch [111d:806a] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 38
Bus: primary=04, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: b1a00000-b1cfffff [size=3M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
04:04.0 PCI bridge [0604]: Microsemi / PMC / IDT PES24T3G2 PCI Express Gen2
Switch [111d:806a] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 39
Bus: primary=04, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
05:00.0 Ethernet controller [0200]: Intel Corporation 82580 Gigabit Network
Connection [8086:150e] (rev 01)
Subsystem: Silicom Ltd. 82580 Gigabit Network Connection [1374:0380]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 62
Region 0: Memory at b1b80000 (32-bit, non-prefetchable) [size=512K]
Region 3: Memory at b1c0c000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
Kernel modules: igb
05:00.1 Ethernet controller [0200]: Intel Corporation 82580 Gigabit Network
Connection [8086:150e] (rev 01)
Subsystem: Silicom Ltd. 82580 Gigabit Network Connection [1374:0380]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 72
Region 0: Memory at b1b00000 (32-bit, non-prefetchable) [size=512K]
Region 3: Memory at b1c08000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
Kernel modules: igb
05:00.2 Ethernet controller [0200]: Intel Corporation 82580 Gigabit Network
Connection [8086:150e] (rev 01)
Subsystem: Silicom Ltd. 82580 Gigabit Network Connection [1374:0380]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 28
Region 0: Memory at b1a80000 (32-bit, non-prefetchable) [size=512K]
Region 3: Memory at b1c04000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
Kernel modules: igb
05:00.3 Ethernet controller [0200]: Intel Corporation 82580 Gigabit Network
Connection [8086:150e] (rev 01)
Subsystem: Silicom Ltd. 82580 Gigabit Network Connection [1374:0380]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 91
Region 0: Memory at b1a00000 (32-bit, non-prefetchable) [size=512K]
Region 3: Memory at b1c00000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
Kernel modules: igb
07:00.0 PCI bridge [0604]: Microsemi / PMC / IDT PES24T3G2 PCI Express Gen2
Switch [111d:806a] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=07, secondary=08, subordinate=0a, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
08:02.0 PCI bridge [0604]: Microsemi / PMC / IDT PES24T3G2 PCI Express Gen2
Switch [111d:806a] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 40
Bus: primary=08, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
08:04.0 PCI bridge [0604]: Microsemi / PMC / IDT PES24T3G2 PCI Express Gen2
Switch [111d:806a] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 41
Bus: primary=08, secondary=0a, subordinate=0a, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
0d:00.0 RAID bus controller [0104]: Broadcom / LSI MegaRAID SAS 1078
[1000:0060] (rev 04)
Subsystem: Intel Corporation MegaRAID SAS 1078 [8086:34e4]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at b1900000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at 1000 [size=256]
Region 3: Memory at b1940000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at b1980000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: megaraid_sas
Kernel modules: megaraid_sas
0e:00.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd. MGA
G200e [Pilot] ServerEngines (SEP1) [102b:0522] (rev 02) (prog-if 00 [VGA
controller])
Subsystem: Intel Corporation MGA G200e [Pilot] ServerEngines (SEP1)
[8086:0101]
Physical Slot: 5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at b0000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at b1800000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at b1000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: mgag200
Kernel modules: mgag200
fe:00.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath
Architecture Generic Non-core Registers [8086:2c70] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series QuickPath Architecture
Generic Non-core Registers [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:00.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath
Architecture System Address Decoder [8086:2d81] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series QuickPath Architecture
System Address Decoder [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:02.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 0
[8086:2d90] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series QPI Link 0 [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:02.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical 0
[8086:2d91] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series QPI Physical 0 [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:02.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port Link
0 [8086:2d92] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Mirror Port Link 0
[8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:02.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port Link
1 [8086:2d93] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Mirror Port Link 1
[8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:02.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 1
[8086:2d94] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series QPI Link 1 [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:02.5 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical 1
[8086:2d95] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series QPI Physical 1 [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:03.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Registers [8086:2d98] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Registers [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:03.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Target Address Decoder [8086:2d99] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Target Address Decoder [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:03.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller RAS Registers [8086:2d9a] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller RAS Registers [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:03.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Test Registers [8086:2d9c] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Test Registers [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:04.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 0 Control [8086:2da0] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 0 Control [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:04.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 0 Address [8086:2da1] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 0 Address [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:04.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 0 Rank [8086:2da2] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 0 Rank [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:04.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 0 Thermal Control [8086:2da3] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 0 Thermal Control [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:05.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 1 Control [8086:2da8] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 1 Control [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:05.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 1 Address [8086:2da9] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 1 Address [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:05.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 1 Rank [8086:2daa] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 1 Rank [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:05.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 1 Thermal Control [8086:2dab] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 1 Thermal Control [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:06.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 2 Control [8086:2db0] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 2 Control [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:06.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 2 Address [8086:2db1] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 2 Address [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:06.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 2 Rank [8086:2db2] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 2 Rank [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
fe:06.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 2 Thermal Control [8086:2db3] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 2 Thermal Control [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:00.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath
Architecture Generic Non-core Registers [8086:2c70] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series QuickPath Architecture
Generic Non-core Registers [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:00.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath
Architecture System Address Decoder [8086:2d81] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series QuickPath Architecture
System Address Decoder [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 0
[8086:2d90] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series QPI Link 0 [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical 0
[8086:2d91] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series QPI Physical 0 [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port Link
0 [8086:2d92] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Mirror Port Link 0
[8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port Link
1 [8086:2d93] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Mirror Port Link 1
[8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 1
[8086:2d94] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series QPI Link 1 [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.5 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical 1
[8086:2d95] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series QPI Physical 1 [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:03.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Registers [8086:2d98] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Registers [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:03.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Target Address Decoder [8086:2d99] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Target Address Decoder [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:03.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller RAS Registers [8086:2d9a] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller RAS Registers [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:03.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Test Registers [8086:2d9c] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Test Registers [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:04.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 0 Control [8086:2da0] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 0 Control [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:04.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 0 Address [8086:2da1] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 0 Address [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:04.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 0 Rank [8086:2da2] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 0 Rank [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:04.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 0 Thermal Control [8086:2da3] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 0 Thermal Control [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:05.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 1 Control [8086:2da8] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 1 Control [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:05.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 1 Address [8086:2da9] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 1 Address [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:05.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 1 Rank [8086:2daa] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 1 Rank [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:05.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 1 Thermal Control [8086:2dab] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 1 Thermal Control [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:06.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 2 Control [8086:2db0] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 2 Control [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:06.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 2 Address [8086:2db1] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 2 Address [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:06.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 2 Rank [8086:2db2] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 2 Rank [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:06.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 2 Thermal Control [8086:2db3] (rev 02)
Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 2 Thermal Control [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
** USB devices:
Bus 004 Device 003: ID 0424:2512 Microchip Technology, Inc. (formerly SMSC) USB
2.0 Hub
Bus 004 Device 002: ID 0e39:2a00 Smart Modular Technologies, Inc. eUSB
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 046b:ff10 American Megatrends, Inc. Virtual Keyboard and
Mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: bookworm/sid
APT prefers unstable-debug
APT policy: (500, 'unstable-debug'), (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 5.17.0-2-amd64 (SMP w/24 CPU threads; PREEMPT)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
LSM: AppArmor: enabled
Versions of packages linux-image-5.17.0-2-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.141
ii kmod 29-1+b1
ii linux-base 4.8
Versions of packages linux-image-5.17.0-2-amd64 recommends:
ii apparmor 3.0.4-2
ii firmware-linux-free 20200122-1
Versions of packages linux-image-5.17.0-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.06-2
pn linux-doc-5.17 <none>
Versions of packages linux-image-5.17.0-2-amd64 is related to:
ii firmware-amd-graphics 20210818-1
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20210818-1
ii firmware-misc-nonfree 20210818-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---
