Source: linux
Source-Version: 5.16~rc1-1~exp1

Hi,

On Sat, Dec 11, 2021 at 09:58:13PM +0100, Heinz Repp wrote:
> Package: src:linux
> Version: 5.15.5-1
> Severity: normal
> 
> 
> 
> 
> -- Package-specific info:
> ** Version:
> Linux version 5.15.0-2-amd64 (debian-kernel@lists.debian.org) (gcc-11 (Debian 
> 11.2.0-12) 11.2.0, GNU ld (GNU Binutils for Debian) 2.37) #1 SMP Debian 
> 5.15.5-1 (2021-11-26)
> 
> ** Command line:
> BOOT_IMAGE=/vmlinuz-5.15.0-2-amd64 
> root=UUID=ed4d0cfd-411a-492b-b31a-3eefa94764f6 ro vga=792 quiet 
> acpi_enforce_resources=lax
> 
> ** Tainted: POE (12289)
>  * proprietary module was loaded
>  * externally-built ("out-of-tree") module was loaded
>  * unsigned module was loaded
> 
> ** Kernel log:
> [    4.937107] squashfs: version 4.0 (2009/01/31) Phillip Lougher
> [    4.938755] systemd[1]: Mounting Mount unit for core20, revision 1270...
> [    4.940544] systemd[1]: Mounting Mount unit for gnome-3-38-2004, revision 
> 76...
> [    4.942144] systemd[1]: Mounting Mount unit for gnome-3-38-2004, revision 
> 87...
> [    4.945419] systemd[1]: Mounting Mount unit for gtk-common-themes, 
> revision 1515...
> [    4.947837] systemd[1]: Mounting Mount unit for gtk-common-themes, 
> revision 1519...
> [    4.950652] systemd[1]: Mounting Mount unit for snapd, revision 14066...
> [    4.953650] systemd[1]: Mounting Mount unit for snapd, revision 14295...
> [    4.954141] systemd[1]: Started Journal Service.
> [    4.955301] loop5: detected capacity change from 0 to 496320
> [    4.956898] loop6: detected capacity change from 0 to 126632
> [    4.957545] loop7: detected capacity change from 0 to 133552
> [    4.960610] loop9: detected capacity change from 0 to 133320
> [    4.962379] loop10: detected capacity change from 0 to 126784
> [    4.963669] loop8: detected capacity change from 0 to 507712
> [    4.991599] loop11: detected capacity change from 0 to 88616
> [    4.993400] systemd-journald[335]: Received client request to flush 
> runtime journal.
> [    4.993608] loop12: detected capacity change from 0 to 86368
> [    5.091644] nvidia: loading out-of-tree module taints kernel.
> [    5.091669] nvidia: module license 'NVIDIA' taints kernel.
> [    5.091671] Disabling lock debugging due to kernel taint
> [    5.130279] nvidia: module verification failed: signature and/or required 
> key missing - tainting kernel
> [    5.148915] nvidia-nvlink: Nvlink Core is being initialized, major device 
> number 244
> 
> [    5.150071] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: 
> olddecodes=io+mem,decodes=none:owns=io+mem
> [    5.208958] random: crng init done
> [    5.208962] random: 7 urandom warning(s) missed due to ratelimiting
> [    5.322645] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  470.86  Tue 
> Oct 26 21:55:45 UTC 2021
> [    5.476061] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for 
> UNIX platforms  470.86  Tue Oct 26 21:46:51 UTC 2021
> [    5.613985] acpi_cpufreq: overriding BIOS provided _PSD data
> [    5.618487] input: Power Button as 
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
> [    5.618562] ACPI: button: Power Button [PWRB]
> [    5.618619] input: Power Button as 
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
> [    5.618648] ACPI: button: Power Button [PWRF]
> [    5.637093] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
> [    5.637098] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 
> on minor 0
> [    5.764212] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [    5.764273] sd 1:0:0:0: Attached scsi generic sg1 type 0
> [    5.764753] sr 3:0:0:0: Attached scsi generic sg2 type 5
> [    5.764783] sd 6:0:0:0: Attached scsi generic sg3 type 0
> [    5.775671] sd 6:0:0:1: Attached scsi generic sg4 type 0
> [    5.811666] sd 6:0:0:2: Attached scsi generic sg5 type 0
> [    5.830273] sd 6:0:0:3: Attached scsi generic sg6 type 0
> [    5.874622] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
> [    5.916933] input: PC Speaker as /devices/platform/pcspkr/input/input5
> [    5.968095] snd_hda_intel 0000:01:00.1: Disabling MSI
> [    5.968107] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
> [    5.998452] snd_hda_codec_realtek hdaudioC0D3: autoconfig for ALC888: 
> line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
> [    5.998460] snd_hda_codec_realtek hdaudioC0D3:    speaker_outs=0 
> (0x0/0x0/0x0/0x0/0x0)
> [    5.998462] snd_hda_codec_realtek hdaudioC0D3:    hp_outs=1 
> (0x1b/0x0/0x0/0x0/0x0)
> [    5.998465] snd_hda_codec_realtek hdaudioC0D3:    mono: mono_out=0x0
> [    5.998466] snd_hda_codec_realtek hdaudioC0D3:    dig-out=0x1e/0x0
> [    5.998467] snd_hda_codec_realtek hdaudioC0D3:    inputs:
> [    5.998469] snd_hda_codec_realtek hdaudioC0D3:      Front Mic=0x19
> [    5.998471] snd_hda_codec_realtek hdaudioC0D3:      Rear Mic=0x18
> [    5.998472] snd_hda_codec_realtek hdaudioC0D3:      Line=0x1a
> [    6.003122] input: HDA NVidia HDMI/DP,pcm=3 as 
> /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input6
> [    6.003197] input: HDA NVidia HDMI/DP,pcm=7 as 
> /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input7
> [    6.003262] input: HDA NVidia HDMI/DP,pcm=8 as 
> /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
> [    6.003324] input: HDA NVidia HDMI/DP,pcm=9 as 
> /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9
> [    6.003388] input: HDA NVidia HDMI/DP,pcm=10 as 
> /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
> [    6.017947] input: HDA ATI SB Front Mic as 
> /devices/pci0000:00/0000:00:14.2/sound/card0/input11
> [    6.018046] input: HDA ATI SB Rear Mic as 
> /devices/pci0000:00/0000:00:14.2/sound/card0/input12
> [    6.018097] input: HDA ATI SB Line as 
> /devices/pci0000:00/0000:00:14.2/sound/card0/input13
> [    6.018177] input: HDA ATI SB Line Out Front as 
> /devices/pci0000:00/0000:00:14.2/sound/card0/input14
> [    6.018225] input: HDA ATI SB Line Out Surround as 
> /devices/pci0000:00/0000:00:14.2/sound/card0/input15
> [    6.018270] input: HDA ATI SB Line Out CLFE as 
> /devices/pci0000:00/0000:00:14.2/sound/card0/input16
> [    6.018318] input: HDA ATI SB Line Out Side as 
> /devices/pci0000:00/0000:00:14.2/sound/card0/input17
> [    6.018368] input: HDA ATI SB Front Headphone as 
> /devices/pci0000:00/0000:00:14.2/sound/card0/input18
> [    6.168672] kvm: Nested Virtualization enabled
> [    6.168677] SVM: kvm: Nested Paging enabled
> [    6.201535] MCE: In-kernel MCE decoding enabled.
> [    6.311601] mc: Linux media interface: v0.10
> [    6.343664] videodev: Linux video capture interface: v2.00
> [    6.411570] Adding 8388604k swap on /dev/sda2.  Priority:-2 extents:1 
> across:8388604k FS
> [    6.414633] gspca_main: v2.14.0 registered
> [    6.423556] gspca_main: gspca_zc3xx-2.14.0 probing 0ac8:305b
> [    7.167997] EXT4-fs (sdb3): mounted filesystem with ordered data mode. 
> Opts: errors=remount-ro. Quota mode: none.
> [    7.168060] ext4 filesystem being mounted at /boot supports timestamps 
> until 2038 (0x7fffffff)
> [    7.241749] audit: type=1400 audit(1639255059.101:2): apparmor="STATUS" 
> operation="profile_load" profile="unconfined" name="lsb_release" pid=1065 
> comm="apparmor_parser"
> [    7.258820] audit: type=1400 audit(1639255059.117:3): apparmor="STATUS" 
> operation="profile_load" profile="unconfined" 
> name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=1064 
> comm="apparmor_parser"
> [    7.258830] audit: type=1400 audit(1639255059.117:4): apparmor="STATUS" 
> operation="profile_load" profile="unconfined" 
> name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" 
> pid=1064 comm="apparmor_parser"
> [    7.263699] audit: type=1400 audit(1639255059.121:5): apparmor="STATUS" 
> operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1069 
> comm="apparmor_parser"
> [    7.263708] audit: type=1400 audit(1639255059.121:6): apparmor="STATUS" 
> operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" 
> pid=1069 comm="apparmor_parser"
> [    7.276895] audit: type=1400 audit(1639255059.137:7): apparmor="STATUS" 
> operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1071 
> comm="apparmor_parser"
> [    7.276904] audit: type=1400 audit(1639255059.137:8): apparmor="STATUS" 
> operation="profile_load" profile="unconfined" name="man_filter" pid=1071 
> comm="apparmor_parser"
> [    7.276907] audit: type=1400 audit(1639255059.137:9): apparmor="STATUS" 
> operation="profile_load" profile="unconfined" name="man_groff" pid=1071 
> comm="apparmor_parser"
> [    7.286423] audit: type=1400 audit(1639255059.145:10): apparmor="STATUS" 
> operation="profile_load" profile="unconfined" name="tcpdump" pid=1072 
> comm="apparmor_parser"
> [    7.303097] audit: type=1400 audit(1639255059.161:11): apparmor="STATUS" 
> operation="profile_load" profile="unconfined" name="ioq3ded" pid=1073 
> comm="apparmor_parser"
> [    8.022854] input: gspca_zc3xx as 
> /devices/pci0000:00/0000:00:13.0/usb7/7-2/input/input19
> [    8.024451] usbcore: registered new interface driver gspca_zc3xx
> [   10.135694] loop13: detected capacity change from 0 to 8
> [   10.353527] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex
> [   10.353535] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for 
> RX
> [   10.353549] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
> [   10.592405] vboxdrv: Found 2 processor cores
> [   10.628885] vboxdrv: TSC mode is Invariant, tentative frequency 2999998046 
> Hz
> [   10.628891] vboxdrv: Successfully loaded version 6.1.30_Debian r148432 
> (interface 0x00320000)
> [   10.646819] VBoxNetFlt: Successfully started.
> [   10.658602] VBoxNetAdp: Successfully started.
> 
> ** Model information
> sys_vendor: To Be Filled By O.E.M.
> product_name: To Be Filled By O.E.M.
> product_version: To Be Filled By O.E.M.
> chassis_vendor: To Be Filled By O.E.M.
> chassis_version: To Be Filled By O.E.M.
> bios_vendor: American Megatrends Inc.
> bios_version: 080015 
> board_vendor: FOXCONN
> board_name: A7DA 3 series
> board_version: 1.0
> 
> ** Loaded modules:
> vboxnetadp(OE)
> vboxnetflt(OE)
> vboxdrv(OE)
> rfkill
> cpufreq_userspace
> cpufreq_powersave
> cpufreq_ondemand
> cpufreq_conservative
> binfmt_misc
> ext4
> crc16
> mbcache
> jbd2
> gspca_zc3xx
> gspca_main
> videobuf2_vmalloc
> videobuf2_memops
> videobuf2_v4l2
> videobuf2_common
> videodev
> mc
> edac_mce_amd
> kvm_amd
> ccp
> rng_core
> kvm
> irqbypass
> snd_hda_codec_realtek
> snd_hda_codec_hdmi
> snd_hda_codec_generic
> ledtrig_audio
> snd_hda_intel
> snd_intel_dspcfg
> snd_intel_sdw_acpi
> snd_hda_codec
> evdev
> pcspkr
> wmi_bmof
> serio_raw
> snd_hda_core
> k10temp
> snd_hwdep
> snd_pcm_oss
> sp5100_tco
> snd_mixer_oss
> snd_pcm
> watchdog
> snd_timer
> snd
> soundcore
> sg
> nvidia_drm(POE)
> button
> acpi_cpufreq
> drm_kms_helper
> cec
> rc_core
> nvidia_modeset(POE)
> nvidia(POE)
> squashfs
> it87
> hwmon_vid
> loop
> msr
> parport_pc
> drm
> ppdev
> lp
> fuse
> parport
> configfs
> ip_tables
> x_tables
> autofs4
> btrfs
> uas
> blake2b_generic
> usb_storage
> raid10
> raid456
> async_raid6_recov
> async_memcpy
> async_pq
> async_xor
> async_tx
> xor
> raid6_pq
> libcrc32c
> crc32c_generic
> raid1
> raid0
> multipath
> linear
> md_mod
> f2fs
> lz4hc_compress
> lz4_compress
> zstd_compress
> crc32_generic
> hid_logitech
> ff_memless
> hid_generic
> usbhid
> hid
> sd_mod
> sr_mod
> cdrom
> t10_pi
> crc_t10dif
> crct10dif_generic
> crct10dif_common
> ata_generic
> pata_atiixp
> ahci
> libahci
> xhci_pci
> xhci_hcd
> ohci_pci
> tg3
> libata
> firewire_ohci
> scsi_mod
> libphy
> ohci_hcd
> ehci_pci
> ehci_hcd
> usbcore
> firewire_core
> ptp
> i2c_piix4
> crc_itu_t
> scsi_common
> pps_core
> usb_common
> wmi
> 
> ** PCI devices:
> 00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] RS780 Host 
> Bridge [1022:9600]
>       Subsystem: Foxconn International, Inc. RS780 Host Bridge [105b:0e1d]
>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx-
>       Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort+ >SERR- <PERR- INTx-
>       Latency: 0
>       NUMA node: 0
>       Capabilities: <access denied>
> 
> 00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780 PCI to 
> PCI bridge (ext gfx port 0) [1022:9603] (prog-if 00 [Normal decode])
>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx+
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 0, Cache Line Size: 64 bytes
>       Interrupt: pin A routed to IRQ 24
>       NUMA node: 0
>       Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>       I/O behind bridge: 0000d000-0000dfff [size=4K]
>       Memory behind bridge: fd000000-fe8fffff [size=25M]
>       Prefetchable memory behind bridge: 00000000ce000000-00000000dfffffff 
> [size=288M]
>       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort+ <SERR- <PERR-
>       BridgeCtl: Parity+ SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>       Capabilities: <access denied>
>       Kernel driver in use: pcieport
> 
> 00:07.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI 
> to PCI bridge (PCIE port 3) [1022:9607] (prog-if 00 [Normal decode])
>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx+
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 0, Cache Line Size: 64 bytes
>       Interrupt: pin A routed to IRQ 25
>       NUMA node: 0
>       Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>       I/O behind bridge: [disabled]
>       Memory behind bridge: fe900000-fe9fffff [size=1M]
>       Prefetchable memory behind bridge: [disabled]
>       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort+ <SERR- <PERR-
>       BridgeCtl: Parity+ SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>       Capabilities: <access denied>
>       Kernel driver in use: pcieport
> 
> 00:09.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI 
> to PCI bridge (PCIE port 4) [1022:9608] (prog-if 00 [Normal decode])
>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx+
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 0, Cache Line Size: 64 bytes
>       Interrupt: pin A routed to IRQ 26
>       NUMA node: 0
>       Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>       I/O behind bridge: [disabled]
>       Memory behind bridge: fea00000-feafffff [size=1M]
>       Prefetchable memory behind bridge: [disabled]
>       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort+ <SERR- <PERR-
>       BridgeCtl: Parity+ SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>       Capabilities: <access denied>
>       Kernel driver in use: pcieport
> 
> 00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] 
> SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 
> 1.0])
>       Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 
> SATA Controller [AHCI mode] [1002:4391]
>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx-
>       Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Latency: 64, Cache Line Size: 64 bytes
>       Interrupt: pin A routed to IRQ 22
>       NUMA node: 0
>       Region 0: I/O ports at c000 [size=8]
>       Region 1: I/O ports at b000 [size=4]
>       Region 2: I/O ports at a000 [size=8]
>       Region 3: I/O ports at 9000 [size=4]
>       Region 4: I/O ports at 8000 [size=16]
>       Region 5: Memory at fcfffc00 (32-bit, non-prefetchable) [size=1K]
>       Capabilities: <access denied>
>       Kernel driver in use: ahci
>       Kernel modules: ahci
> 
> 00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] 
> SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
>       Subsystem: Foxconn International, Inc. SB7x0/SB8x0/SB9x0 USB OHCI0 
> Controller [105b:0e1d]
>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx-
>       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Latency: 64, Cache Line Size: 64 bytes
>       Interrupt: pin A routed to IRQ 16
>       NUMA node: 0
>       Region 0: Memory at fcffe000 (32-bit, non-prefetchable) [size=4K]
>       Kernel driver in use: ohci-pci
>       Kernel modules: ohci_pci
> 
> 00:12.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 
> USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
>       Subsystem: Foxconn International, Inc. SB7x0 USB OHCI1 Controller 
> [105b:0e1d]
>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx-
>       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Latency: 64, Cache Line Size: 64 bytes
>       Interrupt: pin A routed to IRQ 16
>       NUMA node: 0
>       Region 0: Memory at fcffd000 (32-bit, non-prefetchable) [size=4K]
>       Kernel driver in use: ohci-pci
>       Kernel modules: ohci_pci
> 
> 00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] 
> SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
>       Subsystem: Foxconn International, Inc. SB7x0/SB8x0/SB9x0 USB EHCI 
> Controller [105b:0e1d]
>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx-
>       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Latency: 64, Cache Line Size: 64 bytes
>       Interrupt: pin B routed to IRQ 17
>       NUMA node: 0
>       Region 0: Memory at fcfff800 (32-bit, non-prefetchable) [size=256]
>       Capabilities: <access denied>
>       Kernel driver in use: ehci-pci
>       Kernel modules: ehci_pci
> 
> 00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] 
> SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
>       Subsystem: Foxconn International, Inc. SB7x0/SB8x0/SB9x0 USB OHCI0 
> Controller [105b:0e1d]
>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx-
>       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Latency: 64, Cache Line Size: 64 bytes
>       Interrupt: pin A routed to IRQ 18
>       NUMA node: 0
>       Region 0: Memory at fcffc000 (32-bit, non-prefetchable) [size=4K]
>       Kernel driver in use: ohci-pci
>       Kernel modules: ohci_pci
> 
> 00:13.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 
> USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
>       Subsystem: Foxconn International, Inc. SB7x0 USB OHCI1 Controller 
> [105b:0e1d]
>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx-
>       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Latency: 64, Cache Line Size: 64 bytes
>       Interrupt: pin A routed to IRQ 18
>       NUMA node: 0
>       Region 0: Memory at fcff7000 (32-bit, non-prefetchable) [size=4K]
>       Kernel driver in use: ohci-pci
>       Kernel modules: ohci_pci
> 
> 00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] 
> SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
>       Subsystem: Foxconn International, Inc. SB7x0/SB8x0/SB9x0 USB EHCI 
> Controller [105b:0e1d]
>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx-
>       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Latency: 64, Cache Line Size: 64 bytes
>       Interrupt: pin B routed to IRQ 19
>       NUMA node: 0
>       Region 0: Memory at fcfff400 (32-bit, non-prefetchable) [size=256]
>       Capabilities: <access denied>
>       Kernel driver in use: ehci-pci
>       Kernel modules: ehci_pci
> 
> 00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus 
> Controller [1002:4385] (rev 3c)
>       Subsystem: Foxconn International, Inc. SBx00 SMBus Controller 
> [105b:0e1d]
>       Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx+
>       Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       NUMA node: 0
>       Capabilities: <access denied>
>       Kernel driver in use: piix4_smbus
>       Kernel modules: i2c_piix4, sp5100_tco
> 
> 00:14.1 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD/ATI] 
> SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (prog-if 8a [ISA Compatibility 
> mode controller, supports both channels switched to PCI native mode, supports 
> bus mastering])
>       Subsystem: Foxconn International, Inc. SB7x0/SB8x0/SB9x0 IDE Controller 
> [105b:0e1d]
>       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx-
>       Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Latency: 64
>       Interrupt: pin A routed to IRQ 16
>       NUMA node: 0
>       Region 0: Memory at 000001f0 (32-bit, non-prefetchable) [virtual] 
> [size=8]
>       Region 1: Memory at 000003f0 (type 3, non-prefetchable) [virtual]
>       Region 2: Memory at 00000170 (32-bit, non-prefetchable) [virtual] 
> [size=8]
>       Region 3: Memory at 00000370 (type 3, non-prefetchable) [virtual]
>       Region 4: I/O ports at ff00 [virtual] [size=16]
>       Capabilities: <access denied>
>       Kernel driver in use: pata_atiixp
>       Kernel modules: pata_atiixp, ata_generic
> 
> 00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 
> Azalia (Intel HDA) [1002:4383]
>       Subsystem: Foxconn International, Inc. SBx00 Azalia (Intel HDA) 
> [105b:0e1d]
>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx-
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 64, Cache Line Size: 64 bytes
>       Interrupt: pin A routed to IRQ 16
>       NUMA node: 0
>       Region 0: Memory at fcff0000 (64-bit, non-prefetchable) [size=16K]
>       Capabilities: <access denied>
>       Kernel driver in use: snd_hda_intel
>       Kernel modules: snd_hda_intel
> 
> 00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] 
> SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
>       Subsystem: Foxconn International, Inc. SB7x0/SB8x0/SB9x0 LPC host 
> controller [105b:0e1d]
>       Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx-
>       Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Latency: 0
>       NUMA node: 0
> 
> 00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI 
> to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx-
>       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Latency: 64
>       NUMA node: 0
>       Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
>       I/O behind bridge: 0000e000-0000efff [size=4K]
>       Memory behind bridge: feb00000-febfffff [size=1M]
>       Prefetchable memory behind bridge: [disabled]
>       Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort+ <SERR- <PERR-
>       BridgeCtl: Parity+ SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> 
> 00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] 
> SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
>       Subsystem: Foxconn International, Inc. SB7x0/SB8x0/SB9x0 USB OHCI2 
> Controller [105b:0e1d]
>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx-
>       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Latency: 64, Cache Line Size: 64 bytes
>       Interrupt: pin C routed to IRQ 18
>       NUMA node: 0
>       Region 0: Memory at fcff6000 (32-bit, non-prefetchable) [size=4K]
>       Kernel driver in use: ohci-pci
>       Kernel modules: ohci_pci
> 
> 00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h 
> Processor HyperTransport Configuration [1022:1200]
>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx-
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       NUMA node: 0
>       Capabilities: <access denied>
> 
> 00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h 
> Processor Address Map [1022:1201]
>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx-
>       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       NUMA node: 0
> 
> 00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h 
> Processor DRAM Controller [1022:1202]
>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx-
>       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       NUMA node: 0
> 
> 00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h 
> Processor Miscellaneous Control [1022:1203]
>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx-
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       NUMA node: 0
>       Capabilities: <access denied>
>       Kernel driver in use: k10temp
>       Kernel modules: k10temp
> 
> 00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h 
> Processor Link Control [1022:1204]
>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx-
>       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       NUMA node: 0
> 
> 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GP108 [GeForce 
> GT 1030] [10de:1d01] (rev a1) (prog-if 00 [VGA controller])
>       Subsystem: Micro-Star International Co., Ltd. [MSI] GP108 [GeForce GT 
> 1030] [1462:8c98]
>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx+
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 0
>       Interrupt: pin A routed to IRQ 29
>       NUMA node: 0
>       Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
>       Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
>       Region 3: Memory at ce000000 (64-bit, prefetchable) [size=32M]
>       Region 5: I/O ports at d800 [size=128]
>       Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
>       Capabilities: <access denied>
>       Kernel driver in use: nvidia
>       Kernel modules: nvidia
> 
> 01:00.1 Audio device [0403]: NVIDIA Corporation GP108 High Definition Audio 
> Controller [10de:0fb8] (rev a1)
>       Subsystem: Micro-Star International Co., Ltd. [MSI] GP108 High 
> Definition Audio Controller [1462:8c98]
>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx-
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 0, Cache Line Size: 64 bytes
>       Interrupt: pin B routed to IRQ 19
>       NUMA node: 0
>       Region 0: Memory at fe87c000 (32-bit, non-prefetchable) [size=16K]
>       Capabilities: <access denied>
>       Kernel driver in use: snd_hda_intel
>       Kernel modules: snd_hda_intel
> 
> 02:00.0 USB controller [0c03]: VIA Technologies, Inc. VL800/801 xHCI USB 3.0 
> Controller [1106:3432] (rev 03) (prog-if 30 [XHCI])
>       Subsystem: VIA Technologies, Inc. VL800/801 xHCI USB 3.0 Controller 
> [1106:3432]
>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx+
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 0, Cache Line Size: 64 bytes
>       Interrupt: pin A routed to IRQ 27
>       NUMA node: 0
>       Region 0: Memory at fe9ff000 (32-bit, non-prefetchable) [size=4K]
>       Capabilities: <access denied>
>       Kernel driver in use: xhci_hcd
>       Kernel modules: xhci_pci
> 
> 03:00.0 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetLink 
> BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10)
>       Subsystem: Foxconn International, Inc. NetLink BCM5784M Gigabit 
> Ethernet PCIe [105b:0e1d]
>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx+
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 0, Cache Line Size: 64 bytes
>       Interrupt: pin A routed to IRQ 28
>       NUMA node: 0
>       Region 0: Memory at feaf0000 (64-bit, non-prefetchable) [size=64K]
>       Capabilities: <access denied>
>       Kernel driver in use: tg3
>       Kernel modules: tg3
> 
> 04:07.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire 
> II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
>       Subsystem: Foxconn International, Inc. VT6306/7/8 [Fire II(M)] IEEE 
> 1394 OHCI Controller [105b:0e1d]
>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx-
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Latency: 64 (8000ns max), Cache Line Size: 64 bytes
>       Interrupt: pin A routed to IRQ 22
>       NUMA node: 0
>       Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=2K]
>       Region 1: I/O ports at e800 [size=128]
>       Capabilities: <access denied>
>       Kernel driver in use: firewire_ohci
>       Kernel modules: firewire_ohci
> 
> 
> ** USB devices:
> Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 007 Device 002: ID 0ac8:305b Z-Star Microelectronics Corp. ZC0305 Webcam
> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 003: ID 058f:6364 Alcor Micro Corp. AU6477 Card Reader 
> Controller
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 002: ID 046d:c512 Logitech, Inc. LX-700 Cordless Desktop 
> Receiver
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 004 Device 002: ID 2109:0811 VIA Labs, Inc. Hub
> Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> 
> 
> -- System Information:
> Debian Release: bookworm/sid
>   APT prefers testing
>   APT policy: (990, 'testing'), (150, 'unstable')
> Architecture: amd64 (x86_64)
> Foreign Architectures: i386
> 
> Kernel: Linux 5.15.0-2-amd64 (SMP w/2 CPU threads)
> Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE, 
> TAINT_UNSIGNED_MODULE
> Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE not 
> set
> Shell: /bin/sh linked to /bin/dash
> Init: systemd (via /run/systemd/system)
> LSM: AppArmor: enabled
> 
> Versions of packages linux-image-5.15.0-2-amd64 depends on:
> ii  initramfs-tools [linux-initramfs-tool]  0.140
> ii  kmod                                    29-1
> ii  linux-base                              4.6
> 
> Versions of packages linux-image-5.15.0-2-amd64 recommends:
> ii  apparmor             3.0.3-6
> ii  firmware-linux-free  20200122-1
> 
> Versions of packages linux-image-5.15.0-2-amd64 suggests:
> pn  debian-kernel-handbook  <none>
> ii  grub-pc                 2.04-20
> pn  linux-doc-5.15          <none>
> 
> Versions of packages linux-image-5.15.0-2-amd64 is related to:
> ii  firmware-amd-graphics     20210818-1
> ii  firmware-atheros          20210818-1
> ii  firmware-bnx2             20210818-1
> ii  firmware-bnx2x            20210818-1
> pn  firmware-brcm80211        <none>
> pn  firmware-cavium           <none>
> pn  firmware-intel-sound      <none>
> ii  firmware-intelwimax       20210818-1
> ii  firmware-ipw2x00          20210818-1
> ii  firmware-ivtv             20210818-1
> ii  firmware-iwlwifi          20210818-1
> ii  firmware-libertas         20210818-1
> ii  firmware-linux-nonfree    20210818-1
> ii  firmware-misc-nonfree     20210818-1
> pn  firmware-myricom          <none>
> pn  firmware-netxen           <none>
> ii  firmware-qlogic           20210818-1
> ii  firmware-realtek          20210818-1
> pn  firmware-samsung          <none>
> pn  firmware-siano            <none>
> pn  firmware-ti-connectivity  <none>
> pn  xen-hypervisor            <none>
> 
> -- no debconf information
> 
> Since upgrade to the first 5.15 kernel the second page of kernel messages 
> read:
> 
> Dez 11 21:37:36 seaorbiter kernel: sd 0:0:0:0: [sda] Asking for cache data 
> failed
> Dez 11 21:37:36 seaorbiter kernel: sd 0:0:0:0: [sda] Assuming drive cache: 
> write through
> Dez 11 21:37:36 seaorbiter kernel: sd 1:0:0:0: [sdb] Asking for cache data 
> failed
> Dez 11 21:37:36 seaorbiter kernel: sd 1:0:0:0: [sdb] Assuming drive cache: 
> write through
> 
> No kernels before had this problem. Both drives have write-caching enabled:
> 
> ~$ sudo hdparm -W /dev/sda
> /dev/sda:
>  write-caching =  1 (on)
> ~$ sudo hdparm -W /dev/sdb
> 
> /dev/sdb:
>  write-caching =  1 (on)
> 
> The drives are:
> 
> ~$ sudo smartctl -i /dev/sda
> smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-2-amd64] (local build)
> Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
> 
> === START OF INFORMATION SECTION ===
> Model Family:     Seagate Barracuda 7200.12
> Device Model:     ST3500418AS
> Serial Number:    5VMTM0Z2
> LU WWN Device Id: 5 000c50 03836f749
> Firmware Version: CC46
> User Capacity:    500.107.862.016 bytes [500 GB]
> Sector Size:      512 bytes logical/physical
> Rotation Rate:    7200 rpm
> Device is:        In smartctl database [for details use: -P show]
> ATA Version is:   ATA8-ACS T13/1699-D revision 4
> SATA Version is:  SATA 2.6, 3.0 Gb/s
> Local Time is:    Sat Dec 11 21:41:54 2021 CET
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
> 
> ~$ sudo smartctl -i /dev/sdb
> smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-2-amd64] (local build)
> Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
> 
> === START OF INFORMATION SECTION ===
> Model Family:     Marvell based SanDisk SSDs
> Device Model:     SanDisk SDSSDHII240G
> Serial Number:    151240400150
> LU WWN Device Id: 5 001b44 e42365916
> Firmware Version: X31200RL
> User Capacity:    240.057.409.536 bytes [240 GB]
> Sector Size:      512 bytes logical/physical
> Rotation Rate:    Solid State Device
> Form Factor:      2.5 inches
> TRIM Command:     Available, deterministic, zeroed
> Device is:        In smartctl database [for details use: -P show]
> ATA Version is:   ACS-2 T13/2015-D revision 3
> SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
> Local Time is:    Sat Dec 11 21:42:51 2021 CET
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled

This sounds like
https://lore.kernel.org/lkml/6ecc0597-3b2b-d8df-1dd9-38a921c59...@opensource.wdc.com/
and https://bugzilla.kernel.org/show_bug.cgi?id=215137 , addressed in
5.15.6 and 5.16-rc1.

https://git.kernel.org/linus/c749301ebee82eb5e97dec14b6ab31a4aabe37a6

Regards,
Salvatore

Reply via email to