On Sat, Sep 04, 2021 at 06:50:16PM +0100, Steve McIntyre wrote: > >I have a synquacer here still and I'll take a look. I noticed on >bullseye release day that USB stuff didn't seem to work in the >installer on the synquacer either. Maybe there's been a regression in >config. :-/ > >I'll take a look...
Hmmm, booting 5.10.0-0.bpo.8-arm64 here does not work at all. I'm seeing a lot of errors around DMA setup, e.g.: [ 0.142797] OF: translation of DMA address(0) to CPU address failed node() [ 0.142824] sram 45200000.sram: Invalid size 0x1 for dma-range(s) [ 0.142991] OF: translation of DMA address(0) to CPU address failed node() [ 0.143008] uart-pl011 2a400000.uart: Invalid size 0x1 for dma-range(s) ... [ 3.843964] OF: translation of DMA address(0) to CPU address failed node() [ 3.850875] armv8-pmu pmu: Invalid size 0x1 for dma-range(s) [ 3.857518] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available ... [ 3.954986] OF: translation of DMA address(0) to CPU address failed node() ... [ 4.391564] OF: translation of DMA address(0) to CPU address failed node() [ 4.398449] pcieport 0000:00:00.0: Invalid size 0x1 for dma-range(s) [ 4.405253] OF: translation of DMA address(0) to CPU address failed node() [ 4.412161] pcieport 0000:01:01.0: Invalid size 0x1 for dma-range(s) [ 4.418885] OF: translation of DMA address(0) to CPU address failed node() [ 4.425778] pcieport 0000:01:03.0: Invalid size 0x1 for dma-range(s) [ 4.432487] OF: translation of DMA address(0) to CPU address failed node() [ 4.439385] pcieport 0000:01:05.0: Invalid size 0x1 for dma-range(s) [ 4.446095] OF: translation of DMA address(0) to CPU address failed node() [ 4.452988] pcieport 0000:01:07.0: Invalid size 0x1 for dma-range(s) [ 4.459693] pci 0000:04:00.0: enabling device (0000 -> 0002) [ 4.465488] OF: translation of DMA address(0) to CPU address failed node() ... [ 4.472385] pci-host-generic 70000000.pcie: Invalid size 0x1 for dma-range(s) Shortly after this, I see looping errors in the sdhci driver: [ 5.728589] xhci_hcd: probe of 0000:04:00.0 failed with error -12 [ 5.734347] sp : ffff8000142bbb10 [ 5.734351] x29: ffff8000142bbb10 x28: 0000000000000000 [ 5.734358] x27: ffff000801ebf848 x26: ffffffffffffffff [ 5.768201] x25: 0000000000000080 x24: 0000000000010000 [ 5.773514] x23: ffff00080176ac10 x22: 0000000889b60080 [ 5.778826] x21: 0000000000000000 x20: 0000000000000000 [ 5.784139] x19: ffff8000117c9788 x18: 0000000000000020 [ 5.789451] x17: ffff00080833da00 x16: 0000000000000080 [ 5.794763] x15: ffffffffffffffff x14: 2820776f6c667265 [ 5.800076] x13: 766f203633353536 x12: 2b66666666666666 [ 5.805389] x11: 6666666666666666 x10: 6678302072646461 [ 5.810701] x9 : ffff80001011159c x8 : 62202c6666666666 [ 5.816013] x7 : 666666206b73616d x6 : ffff00087f4647c0 [ 5.821325] x5 : ffff8000142bb828 x4 : 0000000000000000 [ 5.826637] x3 : 0000000000000000 x2 : 00000000ffffffff [ 5.831949] x1 : 3082d45f0379e900 x0 : 0000000000000000 [ 5.837262] Call trace: [ 5.839708] swiotlb_map+0x294/0x2a8 [ 5.843281] dma_map_page_attrs+0xec/0x228 [ 5.847382] sdhci_setup_host+0xa8c/0xee8 [sdhci] [ 5.852086] sdhci_add_host+0x20/0x58 [sdhci] [ 5.856444] sdhci_f_sdh30_probe+0x2a8/0x380 [sdhci_f_sdh30] [ 5.862104] platform_drv_probe+0x5c/0xb0 [ 5.866113] really_probe+0xf0/0x4d8 [ 5.869686] driver_probe_device+0xfc/0x168 [ 5.873868] __driver_attach_async_helper+0xbc/0xc8 [ 5.878743] async_run_entry_fn+0x50/0x218 [ 5.882837] process_one_work+0x1bc/0x480 [ 5.886843] worker_thread+0x158/0x4e0 [ 5.890590] kthread+0x12c/0x130 [ 5.893817] ret_from_fork+0x10/0x30 [ 5.897389] ---[ end trace 986b9b1a11578595 ]--- Longer log attached. I'm wondering if there's a DTB mismatch or something - my system here is still using the built-in DTB from the EFI firmware, and I don't see a newer DTB available in the debian package nor in upstream git. @Arnd any clues please? -- Steve McIntyre, Cambridge, UK. st...@einval.com “Changing random stuff until your program works is bad coding practice, but if you do it fast enough it’s Machine Learning.” -- https://twitter.com/manisha72617183
synquacer.log.gz
Description: application/gzip
