--- Begin Message ---
Package: kernel-package
Debian 10.0 sid hppa refuses to boot on HP C8000:
palo ipl 2.00 http://www.parisc-linux.org - Mon, 01 Jan 2018 21:07:58 +0100
Boot image contains:
0/vmlinux32 3051144(0) bytes @ 0xf9c800
0/vmlinux64 4083216(0) bytes @ 0x1285800
0/ramdisk 15425064 bytes @ 0xdb800
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).
Command line for kernel: ' console=ttyS0 TERM=vt102 palo_kernel=0/vmlinuz'
Selected kernel: /vmlinuz from partition 0
Selected ramdisk: /ramdisk from partition 0
Warning: kernel name doesn't end with 32 or 64 -- Guessing... Choosing
64-bit kernel
ELF64 executable
Entry 000e0000 first 000e0000 n 2
Segment 0 load 000e0000 size 1240 mediaptr 0x1000
Segment 1 load 01400000 size 4069188 mediaptr 0x2000
Loading ramdisk 15425064 bytes @ 3f139000...
Branching to kernel entry point 0x000e0000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
Uncompressing ...
Booting kernel ...
[ 0.000000] Linux version 4.19.0-5-parisc64-smp (
debian-kernel@lists.debian.org) (gcc version 8.3.0 (GCC)) #1 SMP Debian
4.19.37-5 (2019-06-19)
[ 0.000000] CPU0: thread -1, cpu 0, socket 0
[ 0.000000] FP[0] enabled: Rev 1 Model 20
[ 0.000000] The 64-bit Kernel has started...
[ 0.000000] Kernel default page size is 4 KB. Huge pages enabled with 1
MB physical and 2 MB virtual size.
[ 0.000000] bootconsole [ttyB0] enabled
[ 0.000000] Initialized PDC Console for debugging.
[ 0.000000] Determining PDC firmware type: 64 bit PAT.
[ 0.000000] PAT: Running on cell 0 and location 1.
[ 0.000000] model 000088b0 00000491 00000000 00000002 5680c2cb53677fcd
100000f0 00000008 000000b2 000000b2
[ 0.000000] vers 00000302
[ 0.000000] CPUID vers 20 rev 5 (0x00000285)
[ 0.000000] capabilities 0x35
[ 0.000000] model 9000/785/C8000
[ 0.000000] parisc_cache_init: Only equivalent aliasing supported!
[ 0.000000] Memory Ranges:
[ 0.000000] 0) Start 0x0000000000000000 End 0x000000003fffffff Size
1024 MB
[ 0.000000] 1) Start 0x0000000100000000 End 0x00000002ffdfffff Size
8190 MB
[ 0.000000] 2) Start 0x0000004040000000 End 0x00000040ffffffff Size
3072 MB
[ 0.000000] Total Memory: 12286 MB
[ 0.000000] initrd: 7f139000-7ffeee28
[ 0.000000] initrd: reserving 3f139000-3ffeee28 (mem_max 2ffe00000)
[ 0.000000] PDT: type PDT_PAT_NEW, size 3000, entries 1, status 0,
dbe_loc 0x1c8a8ad00, good_mem 0 MB
[ 0.000000] PDT: Firmware reports 1 entries of faulty memory:
[ 0.000000] PDT: BAD MEMORY at 0x1c8a8ad00, DIMM slot 2a, permanent
multi-bit error.
[ 0.000000] percpu: Embedded 27 pages/cpu s72576 r8192 d29824 u110592
[ 0.000000] SMP: bootstrap CPU ID is 0
[ 0.000000] Built 3 zonelists, mobility grouping on. Total pages:
3096072
[ 0.000000] Kernel command line: console=ttyS0 TERM=vt102
palo_kernel=0/vmlinuz
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12,
16777216 bytes)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.000000] Memory: 12299672K/12580864K available (11244K kernel code,
4460K rwdata, 1475K rodata, 1024K init, 816K bss, 281192K reserved, 0K
cma-reserved)
[ 0.000000] random: get_random_u64 called from
__kmem_cache_create+0xd4/0xac8 with crng_init=0
[ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=8, Nodes=8
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 128
[ 0.000010] sched_clock: 64 bits at 1000MHz, resolution 1ns, wraps every
4398046511103ns
[ 0.107172] Console: colour dummy device 160x64
[ 0.167145] Calibrating delay loop... 1988.60 BogoMIPS (lpj=3977216)
[ 0.283152] pid_max: default: 32768 minimum: 301
[ 0.347535] Security Framework initialized
[ 0.399167] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.487328] AppArmor: AppArmor initialized
[ 0.543613] Mount-cache hash table entries: 32768 (order: 6, 262144
bytes)
[ 0.635198] Mountpoint-cache hash table entries: 32768 (order: 6, 262144
bytes)
[ 0.734588] rcu: Hierarchical SRCU implementation.
[ 0.800331] smp: Bringing up secondary CPUs ...
[ 0.859164] smp: Brought up 3 nodes, 1 CPU
[ 0.919323] devtmpfs: initialized
[ 0.965657] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 1.091214] futex hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.187584] NET: Registered protocol family 16
[ 1.247402] audit: initializing netlink subsys (disabled)
[ 1.319316] audit: type=2000 audit(1562938915.316:1): state=initialized
audit_enabled=0 res=1
[ 1.431962] EISA bus registered
[ 1.471262] Searching for devices...
[ 1.627160] Found devices:
[ 1.659169] 1. Crestone Peak Fast? at 0xfffffffffe780000 [128] { 0, 0x0,
0x88b, 0x00004 }
[ 1.767166] 2. Crestone Peak Fast? at 0xfffffffffe781000 [129] { 0, 0x0,
0x88b, 0x00004 }
[ 1.875188] 3. Memory at 0xfffffffffed08000 [8] { 1, 0x0, 0x0b6, 0x00009
}
[ 1.967165] 4. Pluto BC McKinley Port at 0xfffffffffed00000 [0] { 12,
0x0, 0x880, 0x0000c }
[ 2.079165] 5. Mercury PCI Bridge at 0xfffffffffed20000 [0/0] { 13, 0x0,
0x783, 0x0000a }
[ 2.187167] 6. Mercury PCI Bridge at 0xfffffffffed24000 [0/2] { 13, 0x0,
0x783, 0x0000a }
[ 2.295167] 7. Mercury PCI Bridge at 0xfffffffffed26000 [0/3] { 13, 0x0,
0x783, 0x0000a }
[ 2.403166] 8. Quicksilver AGP Bridge at 0xfffffffffed28000 [0/4] { 13,
0x0, 0x784, 0x0000a }
[ 2.515166] 9. BMC IPMI Mgmt Ctlr at 0xfffffff0f05b0000 [16] { 15, 0x0,
0x004, 0x000c0 }
[ 2.619165] 10. Crestone Peak Fast? Core RS-232 at 0xfffffff0f05e0000
[17] { 10, 0x0, 0x077, 0x000ad }
[ 2.743166] 11. Crestone Peak Fast? Core RS-232 at 0xfffffff0f05e2000
[18] { 10, 0x0, 0x077, 0x000ad }
[ 2.867164] Enabling PDC_PAT chassis codes support v0.05
<Cpu0> 38000c6400e00000 a0e008101100c000
CC_PAT_ENCODED_FIELD_MAJOR_FWD_PROG
<Cpu0> 36000c6a00e00000 0000000000000420 CC_PAT_DATA_FIELD_MAJOR_FWD_PROG
[ 3.775171] Logical CPU #0 is physical cpu #0 at location
0xffff0000ffff15 with hpa 0xfffffffffe780000
[ 3.905683] Logical CPU #1 is physical cpu #1 at location
0xffff0000ffff15 with hpa 0xfffffffffe781000
[ 4.027165] CPU1: thread -1, cpu 1, socket 0
[ 4.084281] Releasing cpu 1 now, hpa=fffffffffe781000
<Cpu1> 0000099101e00000 0000000000000000 CC_BOOT_OS_RENDEZVOUS
<Cpu1> 0100142901e00000 fffffff0f0e09d80 CC_CPU_INTRIGUE_LDB
[ 4.519594] CPU(s): 2 out of 2 PA8800 (Mako) at 1000.000000 MHz online
[ 4.613617] Cache flush threshold set to 32768 KiB
[ 4.680195] TLB flush threshold set to 388 KiB
[ 4.879262] SBA found Pluto 2.3 at 0xfffffffffed00000
[ 4.963188] random: fast init done
[ 5.051233] sba_ioc_init_pluto: reserving 512Mb of IOVA space for agpgart
[ 5.155214] Mercury version TR3.2 (0x32) found at 0xfffffffffed20000
[ 5.263178] LBA: lmmio_space [0xffffffff80000000-0xffffffff9fffffff] -
new
[ 5.371555] LBA 0:0: PCI host bridge to bus 0000:00
[ 5.435179] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 5.515201] pci_bus 0000:00: root bus resource [mem
0xffffffff80000000-0xffffffff9fffffff] (bus address [0x80000000-0x9fffffff])
[ 5.667185] pci_bus 0000:00: root bus resource [bus 00-07]
[ 5.755214] Mercury version TR3.2 (0x32) found at 0xfffffffffed24000
[ 5.879499] LBA 0:2: PCI host bridge to bus 0000:40
[ 5.943182] pci_bus 0000:40: root bus resource [io 0x10000-0x1ffff]
(bus address [0x0000-0xffff])
[ 6.063204] pci_bus 0000:40: root bus resource [mem
0xffffffffa0000000-0xffffffffafffffff] (bus address [0xa0000000-0xafffffff])
[ 6.215183] pci_bus 0000:40: root bus resource [bus 40-47]
[ 6.303214] Mercury version TR3.2 (0x32) found at 0xfffffffffed26000
[ 6.427498] LBA 0:3: PCI host bridge to bus 0000:60
[ 6.491182] pci_bus 0000:60: root bus resource [io 0x20000-0x2ffff]
(bus address [0x0000-0xffff])
[ 6.611199] pci_bus 0000:60: root bus resource [mem
0xffffffffb0000000-0xffffffffbfffffff] (bus address [0xb0000000-0xbfffffff])
[ 6.763180] pci_bus 0000:60: root bus resource [bus 60-67]
[ 6.851268] Quicksilver version TR1.0 (0x10) found at 0xfffffffffed28000
[ 6.963178] LBA: lmmio_space [0xffffffffc0000000-0xffffffffdfffffff] -
new
[ 7.071539] LBA 0:4: PCI host bridge to bus 0000:80
[ 7.135179] pci_bus 0000:80: root bus resource [io 0x30000-0x3ffff]
(bus address [0x0000-0xffff])
[ 7.255201] pci_bus 0000:80: root bus resource [mem
0xffffffffc0000000-0xffffffffdfffffff] (bus address [0xc0000000-0xdfffffff])
[ 7.407181] pci_bus 0000:80: root bus resource [bus 80-87]
[ 7.480294] iosapic: no IRTE for 0000:80:00.1 (IRQ not connected?)
<Cpu0> 0300108200e00000 0000000000000000 CC_PROCS_ENTRY_IN
<Cpu0> 0300030700e00000 0000000000000000 CC_SYSTEM_STATE_RUNNING_OK
[ 7.967212] powersw: Soft power switch at 0xfffffff0f042e278 enabled.
[ 8.061169] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 8.151748] pci 0000:80:00.0: vgaarb: setting as boot VGA device
[ 8.155139] pci 0000:80:00.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[ 8.343197] pci 0000:80:00.0: vgaarb: bridge control possible
[ 8.419192] vgaarb: loaded
[ 8.455607] pps_core: LinuxPPS API ver. 1 registered
[ 8.519174] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giome...@linux.it>
[ 8.639202] PTP clock support registered
[ 8.778957] VFS: Disk quotas dquot_6.6.0
[ 8.827269] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
bytes)
[ 8.920534] AppArmor: AppArmor Filesystem Enabled
[ 8.998091] NET: Registered protocol family 2
[ 9.056186] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5,
131072 bytes)
[ 9.159455] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 9.260804] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 9.348674] TCP: Hash tables configured (established 131072 bind 65536)
[ 9.435598] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 9.519294] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 9.604005] NET: Registered protocol family 1
[ 9.663232] NET: Registered protocol family 44
[ 9.795277] pci 0000:60:01.0: quirk_usb_early_handoff+0x0/0xce8 took
74218 usecs
[ 9.963277] pci 0000:60:01.1: quirk_usb_early_handoff+0x0/0xce8 took
70312 usecs
[ 10.071276] pci 0000:60:01.2: quirk_usb_early_handoff+0x0/0xce8 took
11718 usecs
[ 10.171843] Unpacking initramfs...
[ 11.259232] Freeing initrd memory: 15060K
[ 11.311238] clocksource: cr16: mask: 0xffffffffffffffff max_cycles:
0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 11.443264] clocksource: Switched to clocksource cr16
[ 11.511845] Chassis warnings not supported.
[ 11.567264] Performance monitoring counters enabled for Crestone Peak
Fast?
[ 11.660698] Initialise system trusted keyrings
[ 11.719404] Key type blacklist registered
[ 11.772720] workingset: timestamp_bits=43 max_order=22 bucket_order=0
[ 11.870970] zbud: loaded
[ 2232.026291] random: crng init done
[ 2240.026276] Key type asymmetric registered
[ 2240.026276] Asymmetric key parser 'x509' registered
[ 2240.026276] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 249)
[ 2240.026276] io scheduler noop registered
[ 2240.026276] io scheduler deadline registered
[ 2240.026276] io scheduler cfq registered (default)
[ 2240.942298] io scheduler mq-deadline registered
[ 2241.026281] PDC Stable Storage facility v0.30
[ 2241.026281] STI GSC/PCI core graphics driver Version 0.9b
[ 2241.026281] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2241.026281] console [ttyS0] disabled
[ 2241.026281] 17: ttyS0 at MMIO 0xfffffff0f05e0800 (irq = 75, base_baud =
115200) is a 16550A
[ 2241.026281] console [ttyS0] enabled
[ 2241.026281] console [ttyS0] enabled
[ 2241.026281] bootconsole [ttyB0] disabled
[ 2241.026281] bootconsole [ttyB0] disabled
[ 2241.026281] 18: ttyS1 at MMIO 0xfffffff0f05e2800 (irq = 76, base_baud =
115200) is a 16550A
[ 2241.026281] Linux agpgart interface v0.103
[ 2241.026281] quicksilver: IO PDIR shared with sba_iommu
[ 2241.026281] (null): AGP aperture is 512M @ 0x60000000
[ 2242.026281] mousedev: PS/2 mouse device common for all mice
[ 2242.026281] rtc-generic rtc-generic: rtc core: registered rtc-generic as
rtc0
[ 2242.026281] ledtrig-cpu: registered to indicate activity on CPUs
[ 2242.026281] NET: Registered protocol family 10
[ 2242.026281] Segment Routing with IPv6
[ 2242.026281] mip6: Mobile IPv6
[ 2242.026281] NET: Registered protocol family 17
[ 2242.026281] mpls_gso: MPLS GSO support
[ 2242.026281] registered taskstats version 1
[ 2242.026281] Loading compiled-in X.509 certificates
[ 2245.026276] Loaded X.509 cert 'Debian Secure Boot CA:
6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 2245.026276] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 2245.026276] zswap: loaded using pool lzo/zbud
[ 2245.026276] AppArmor: AppArmor sha1 policy hashing enabled
[ 2245.026276] rtc-generic rtc-generic: setting system clock to 2019-07-12
13:42:40 UTC (1562938960)
[ 2245.026276] Unstable clock detected, switching default tracing clock to
"global"
[ 2245.026276] If you want to keep using the local clock, then add:
[ 2245.026276] "trace_clock=local"
[ 2245.026276] on the kernel command line
[ 2245.026276] Freeing unused kernel memory: 1024K
<Cpu0> 38000c6400e00000 a0e008101100c001
CC_PAT_ENCODED_FIELD_MAJOR_FWD_PROG
<Cpu0> 36000c6a00e00000 0000000000000420 CC_PAT_DATA_FIELD_MAJOR_FWD_PROG
[ 2245.026276] Write protecting the kernel read-only data: 1475k
[ 2245.026276] Run /init as init process
[ 2245.026276] SCSI subsystem initialized
[ 2247.177507] Fusion MPT base driver 3.04.20
[ 2247.177507] Copyright (c) 1999-2008 LSI Corporation
[ 2247.177507] Fusion MPT SPI Host driver 3.04.20
[ 2247.177507] mptbase: ioc0: Initiating bringup
[ 2247.177507] usbcore: registered new interface driver usbfs
[ 2247.177507] usbcore: registered new interface driver hub
[ 2248.177699] usbcore: registered new device driver usb
[ 2248.177699] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2248.177699] ehci-pci: EHCI PCI platform driver
[ 2248.177699] ehci-pci 0000:60:01.2: EHCI Host Controller
[ 2248.177699] ehci-pci 0000:60:01.2: new USB bus registered, assigned bus
number 1
[ 2248.177699] ehci-pci 0000:60:01.2: irq 70, io mem 0xffffffffb00a1000
[ 2248.177699] ehci-pci 0000:60:01.2: USB 2.0 started, EHCI 0.95
[ 2248.177699] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002, bcdDevice= 4.19
[ 2248.177699] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2248.177699] usb usb1: Product: EHCI Host Controller
[ 2248.177699] usb usb1: Manufacturer: Linux 4.19.0-5-parisc64-smp ehci_hcd
[ 2248.177699] usb usb1: SerialNumber: 0000:60:01.2
[ 2248.177699] hub 1-0:1.0: USB hub found
[ 2248.177699] hub 1-0:1.0: 5 ports detected
[ 2249.176235] sil680: 133MHz clock.
[ 2248.177699] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2249.176235] e1000: Intel(R) PRO/1000 Network Driver - version
7.3.21-k8-NAPI
[ 2249.176235] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 2249.176235] scsi host0: pata_sil680
[ 2249.176235] ioc0: LSI53C1030 B2: Capabilities={Initiator,Target}
[ 2249.176235] ohci-pci: OHCI PCI platform driver
[ 2250.134290] ohci-pci 0000:60:01.0: OHCI PCI host controller
[ 2250.144742] ohci-pci 0000:60:01.0: new USB bus registered, assigned bus
number 2
[ 2250.144742] ohci-pci 0000:60:01.0: irq 68, io mem 0xffffffffb00a3000
[ 2250.174275] scsi host1: pata_sil680
[ 2250.174275] ata1: PATA max UDMA/133 cmd 0x26158 ctl 0x26164 bmdma
0x26140 irq 71
[ 2250.174275] ata2: PATA max UDMA/133 cmd 0x26150 ctl 0x26160 bmdma
0x26148 irq 71
[ 2250.174275] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0001, bcdDevice= 4.19
[ 2250.174275] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2250.174275] usb usb2: Product: OHCI PCI host controller
[ 2250.174275] usb usb2: Manufacturer: Linux 4.19.0-5-parisc64-smp ohci_hcd
[ 2250.174275] e1000 0000:60:03.0 eth0: (PCI:33MHz:32-bit) 00:60:b0:7f:c5:76
[ 2250.174275] usb usb2: SerialNumber: 0000:60:01.0
[ 2250.174275] e1000 0000:60:03.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2251.103960] hub 2-0:1.0: USB hub found
[ 2251.103960] hub 2-0:1.0: 3 ports detected
[ 2251.103960] ohci-pci 0000:60:01.1: OHCI PCI host controller
[ 2251.103960] ohci-pci 0000:60:01.1: new USB bus registered, assigned bus
number 3
[ 2251.103960] ohci-pci 0000:60:01.1: irq 69, io mem 0xffffffffb00a2000
[ 2251.103960] ata2.00: ATAPI: LITE-ON COMBO SOHC-4836K, SQK5, max UDMA/44
[ 2251.103960] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0001, bcdDevice= 4.19
[ 2251.103960] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2251.103960] usb usb3: Product: OHCI PCI host controller
[ 2251.103960] usb usb3: Manufacturer: Linux 4.19.0-5-parisc64-smp ohci_hcd
[ 2251.103960] e1000 0000:60:03.0 enp96s3: renamed from eth0
[ 2251.103960] usb usb3: SerialNumber: 0000:60:01.1
[ 2251.103960] hub 3-0:1.0: USB hub found
[ 2252.149658] scsi 1:0:0:0: CD-ROM LITE-ON COMBO SOHC-4836K
SQK5 PQ: 0 ANSI: 5
[ 2252.149658] hub 3-0:1.0: 2 ports detected
[ 2252.149658] sr 1:0:0:0: [sr0] scsi3-mmc drive: 16x/48x writer cd/rw
xa/form2 cdda tray
[ 2252.149658] cdrom: Uniform CD-ROM driver Revision: 3.20
Starting system log daemon: syslogd, klogd.
<Cpu0> 78000c6200e00000 a0e008c01100b009 CC_PAT_ENCODED_FIELD_WARNING
<Cpu0> 76000c6800e00000 0000000000000520 CC_PAT_DATA_FIELD_WARNING
<Cpu0> 0300109100e00000 0000000000000000 CC_PROCS_ENTRY_OUT
[ 2253.176012] Kernel panic - not syncing: Kernel Fault
<Cpu0> 78000c6200e00000 a0e008c01100b009 CC_PAT_ENCODED_FIELD_WARNING
<Cpu0> 76000c6800e00000 0000000000000520 CC_PAT_DATA_FIELD_WARNING
<Cpu0> 0300109100e00000 0000000000000000 CC_PROCS_ENTRY_OUT
[ 2253.176012] ---[ end Kernel panic - not syncing: Kernel Fault ]---
--- End Message ---
