Your message dated Sat, 15 May 2021 07:36:06 -0700 (PDT)
with message-id <609fdc56.1c69fb81.ad48f.5...@mx.google.com>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #872303,
regarding linux-image-4.9.0-3-amd64: Regression: Technisat CableStar Combo HD
CI no longer supported correctly
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
872303: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=872303
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 4.9.30-2+deb9u3
Severity: normal
File:
/lib/modules/4.9.0-3-amd64/kernel/drivers/media/usb/dvb-usb-v2/dvb_usb_v2.ko
Dear Maintainer,
-- Package-specific info:
** Version:
Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0
20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u3 (2017-08-06)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=/dev/sda5 ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[82933.518938] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current]
[descriptor]
[82933.518941] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense
information
[82933.518945] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06
20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[83185.412820] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[83501.410473] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[83533.472511] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR
driverbyte=DRIVER_SENSE
[83533.472516] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current]
[descriptor]
[83533.472518] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense
information
[83533.472522] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06
20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[83817.424709] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[84133.418734] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[84133.548393] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR
driverbyte=DRIVER_SENSE
[84133.548396] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current]
[descriptor]
[84133.548398] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense
information
[84133.548400] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06
20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[84449.429714] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[84493.691453] usb 1-5.3: new high-speed USB device number 17 using xhci_hcd
[84493.795540] usb 1-5.3: New USB device found, idVendor=0424, idProduct=2514
[84493.795542] usb 1-5.3: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[84493.796050] hub 1-5.3:1.0: USB hub found
[84493.796108] hub 1-5.3:1.0: 4 ports detected
[84494.083449] usb 1-5.3.2: new full-speed USB device number 18 using xhci_hcd
[84494.906407] usb 1-5.3.2: New USB device found, idVendor=046d, idProduct=0a12
[84494.906411] usb 1-5.3.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[84494.906414] usb 1-5.3.2: Product: Logitech Wireless Headset
[84494.906415] usb 1-5.3.2: Manufacturer: Logitech
[84494.921639] input: Logitech Logitech Wireless Headset as
/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.3/1-5.3.2/1-5.3.2:1.3/0003:046D:0A12.0005/input/input17
[84494.979745] hid-generic 0003:046D:0A12.0005: input,hiddev0,hidraw2: USB HID
v1.01 Device [Logitech Logitech Wireless Headset] on
usb-0000:00:14.0-5.3.2/input3
[84617.357381] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR
driverbyte=DRIVER_SENSE
[84617.357384] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current]
[descriptor]
[84617.357386] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense
information
[84617.357388] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06
2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[84622.358151] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR
driverbyte=DRIVER_SENSE
[84622.358154] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current]
[descriptor]
[84622.358156] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense
information
[84622.358159] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06
2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[84627.953385] nouveau 0000:05:00.0: DRM: resuming kernel object tree...
[84628.000629] nouveau 0000:05:00.0: bus: MMIO write of b3afc41f FAULT at
6013d4 [ IBUS ]
[84628.000895] nouveau 0000:05:00.0: DRM: resuming client object trees...
[84633.169244] nouveau 0000:05:00.0: DRM: evicting buffers...
[84633.169248] nouveau 0000:05:00.0: DRM: waiting for kernel channels to go
idle...
[84633.169291] nouveau 0000:05:00.0: DRM: suspending client object trees...
[84633.169664] nouveau 0000:05:00.0: DRM: suspending kernel object tree...
[84733.481271] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR
driverbyte=DRIVER_SENSE
[84733.481275] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current]
[descriptor]
[84733.481278] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense
information
[84733.481282] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06
20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[84765.427325] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[85081.435625] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[85333.551949] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR
driverbyte=DRIVER_SENSE
[85333.551954] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current]
[descriptor]
[85333.551957] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense
information
[85333.551960] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06
20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[85397.432375] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[85452.218694] nouveau 0000:05:00.0: DRM: resuming kernel object tree...
[85452.268837] nouveau 0000:05:00.0: bus: MMIO write of 10ff1f1f FAULT at
6013d4 [ IBUS ]
[85452.268862] nouveau 0000:05:00.0: bus: MMIO write of badf1001 FAULT at
50405c [ IBUS ]
[85452.269244] nouveau 0000:05:00.0: DRM: resuming client object trees...
[85458.012080] nouveau 0000:05:00.0: DRM: evicting buffers...
[85458.012085] nouveau 0000:05:00.0: DRM: waiting for kernel channels to go
idle...
[85458.012127] nouveau 0000:05:00.0: DRM: suspending client object trees...
[85458.012576] nouveau 0000:05:00.0: DRM: suspending kernel object tree...
[85713.437515] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[85933.549421] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR
driverbyte=DRIVER_SENSE
[85933.549424] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current]
[descriptor]
[85933.549426] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense
information
[85933.549428] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06
20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[85934.081058] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR
driverbyte=DRIVER_SENSE
[85934.081061] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current]
[descriptor]
[85934.081063] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense
information
[85934.081065] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(12)/Blank
a1 06 20 da 00 00 4f c2 00 b0 00 00
[86029.462874] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[86345.458477] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[86417.119299] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR
driverbyte=DRIVER_SENSE
[86417.119302] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current]
[descriptor]
[86417.119304] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense
information
[86417.119306] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06
2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[86417.636169] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR
driverbyte=DRIVER_SENSE
[86417.636173] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current]
[descriptor]
[86417.636176] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense
information
[86417.636178] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06
2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00
[86533.566118] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR
driverbyte=DRIVER_SENSE
[86533.566123] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current]
[descriptor]
[86533.566125] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense
information
[86533.566129] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06
20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[86534.091551] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR
driverbyte=DRIVER_SENSE
[86534.091555] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current]
[descriptor]
[86534.091558] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense
information
[86534.091561] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(12)/Blank
a1 06 20 da 00 00 4f c2 00 b0 00 00
[86661.459829] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[86977.483634] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[87133.567721] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR
driverbyte=DRIVER_SENSE
[87133.567725] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current]
[descriptor]
[87133.567727] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense
information
[87133.567730] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06
20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[87134.102410] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR
driverbyte=DRIVER_SENSE
[87134.102414] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current]
[descriptor]
[87134.102416] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense
information
[87134.102420] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(12)/Blank
a1 06 20 da 00 00 4f c2 00 b0 00 00
[87293.462389] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
** Model information
sys_vendor: ASUSTeK COMPUTER INC.
product_name: VM62N
product_version: System Version
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: ASUSTeK COMPUTER INC. (Licensed from AMI)
bios_version: 1108
board_vendor: ASUSTeK COMPUTER INC.
board_name: VM62N
board_version: To be filled by O.E.M.
** Loaded modules:
rfcomm
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
bnep
mt2063
binfmt_misc
joydev
hid_generic
ses
enclosure
scsi_transport_sas
drxk
intel_rapl
x86_pkg_temp_thermal
snd_usb_audio
snd_usbmidi_lib
snd_rawmidi
snd_seq_device
btusb
btrtl
btbcm
btintel
bluetooth
usbhid
intel_powerclamp
dvb_usb_az6007
coretemp
cypress_firmware
dvb_usb_v2
kvm_intel
arc4
dvb_core
kvm
rc_core
irqbypass
nouveau
crct10dif_pclmul
crc32_pclmul
uas
usb_storage
rtl8821ae
ghash_clmulni_intel
btcoexist
rtl_pci
rtlwifi
mac80211
snd_hda_codec_realtek
snd_hda_codec_hdmi
snd_hda_codec_generic
eeepc_wmi
intel_cstate
asus_wmi
ttm
mxm_wmi
sparse_keymap
snd_hda_intel
iTCO_wdt
iTCO_vendor_support
cfg80211
snd_hda_codec
intel_uncore
snd_hda_core
evdev
rfkill
snd_hwdep
snd_soc_rt5640
intel_rapl_perf
battery
snd_soc_rl6231
snd_soc_core
snd_compress
i915
serio_raw
snd_pcm
pcspkr
dw_dmac
sg
elan_i2c
shpchp
snd_soc_sst_acpi
snd_soc_sst_match
drm_kms_helper
drm
snd_timer
snd
video
soundcore
mei_me
dw_dmac_core
wmi
button
lpc_ich
mei
i2c_algo_bit
mfd_core
parport_pc
ppdev
lp
parport
ip_tables
x_tables
autofs4
ext4
crc16
jbd2
crc32c_generic
fscrypto
ecb
mbcache
sd_mod
crc32c_intel
aesni_intel
aes_x86_64
glue_helper
lrw
gf128mul
ablk_helper
cryptd
ahci
libahci
ehci_pci
psmouse
libata
ehci_hcd
xhci_pci
xhci_hcd
i2c_i801
scsi_mod
i2c_smbus
r8169
mii
usbcore
usb_common
fan
thermal
sdhci_acpi
sdhci
mmc_core
i2c_hid
hid
i2c_designware_platform
i2c_designware_core
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller
[8086:0a04] (rev 0b)
Subsystem: ASUSTeK Computer Inc. Haswell-ULT DRAM Controller [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: hsw_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT
Integrated Graphics Controller [8086:0a16] (rev 0b) (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. Haswell-ULT Integrated Graphics
Controller [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f7400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller
[8086:0a0c] (rev 0b)
Subsystem: ASUSTeK Computer Inc. Haswell-ULT HD Audio Controller
[1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f7a14000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC
[8086:9c31] (rev 04) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. 8 Series USB xHCI HC [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f7a00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation 8 Series HECI #0
[8086:9c3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. 8 Series HECI [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f7a1d000 (64-bit, non-prefetchable) [size=32]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1b.0 Audio device [0403]: Intel Corporation 8 Series HD Audio Controller
[8086:9c20] (rev 04)
Subsystem: ASUSTeK Computer Inc. 8 Series HD Audio Controller
[1043:863b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f7a10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 1
[8086:9c10] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 2
[8086:9c12] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 3
[8086:9c14] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7900000-f79fffff
Prefetchable memory behind bridge: 00000000f2100000-00000000f21fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 4
[8086:9c16] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7800000-f78fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 5
[8086:9c18] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f6000000-f70fffff
Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series USB EHCI #1
[8086:9c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. 8 Series USB EHCI [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7a1b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation 8 Series LPC Controller
[8086:9c43] (rev 04)
Subsystem: ASUSTeK Computer Inc. 8 Series LPC Controller [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series SATA Controller 1
[AHCI mode] [8086:9c03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. 8 Series SATA Controller 1 [AHCI mode]
[1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 44
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7a1a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series SMBus Controller [8086:9c22]
(rev 04)
Subsystem: ASUSTeK Computer Inc. 8 Series SMBus Controller [1043:8534]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7a19000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 11)
Subsystem: ASUSTeK Computer Inc. RTL8111/8168/8411 PCI Express Gigabit
Ethernet Controller [1043:859e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at f7900000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f2100000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
04:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8821AE
802.11ac PCIe Wireless Network Adapter [10ec:8821]
Subsystem: ASUSTeK Computer Inc. RTL8821AE 802.11ac PCIe Wireless
Network Adapter [1043:85b4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at f7800000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: rtl8821ae
Kernel modules: rtl8821ae
05:00.0 3D controller [0302]: NVIDIA Corporation GF117M [GeForce
610M/710M/810M/820M / GT 620M/625M/630M/720M] [10de:1140] (rev a1)
Subsystem: ASUSTeK Computer Inc. GeForce 820M [1043:8652]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 49
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at c000 [size=128]
Expansion ROM at f7000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nouveau
** USB devices:
Bus 003 Device 002: ID 8087:8000 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 1058:1140 Western Digital Technologies, Inc. My Book
Essential (WDBACW)
Bus 002 Device 002: ID 1058:1026 Western Digital Technologies, Inc.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 008: ID 0b05:17dc ASUSTek Computer, Inc.
Bus 001 Device 009: ID 1058:1100 Western Digital Technologies, Inc. My Book
Essential Edition 2.0 (WDH1U)
Bus 001 Device 006: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 014: ID 14cd:125c Super Top SD card reader
Bus 001 Device 012: ID 14cd:8601 Super Top
Bus 001 Device 018: ID 046d:0a12 Logitech, Inc.
Bus 001 Device 017: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 010: ID 04b3:3025 IBM Corp. NetVista Full Width Keyboard
Bus 001 Device 007: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Bus 001 Device 005: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 002: ID 14f7:0003 TechniSat Digital GmbH CableStar Combo HD CI
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these template lines ***
-- System Information:
Debian Release: 9.1
APT prefers unstable-debug
APT policy: (500, 'unstable-debug'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.9.0-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8),
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.9.0-3-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 23-2
ii linux-base 4.5
Versions of packages linux-image-4.9.0-3-amd64 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2.3
Versions of packages linux-image-4.9.0-3-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta3-5
pn linux-doc-4.9 <none>
Versions of packages linux-image-4.9.0-3-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20161130-3
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--
,
Prof. dr hab. Janusz S. Bien - Uniwersytet Warszawski (Katedra Lingwistyki
Formalnej)
Prof. Janusz S. Bien - University of Warsaw (Formal Linguistics Department)
jsb...@uw.edu.pl, jsb...@mimuw.edu.pl, http://fleksem.klf.uw.edu.pl/~jsbien/
--- End Message ---
--- Begin Message ---
Hi
This bug was filed for a very old kernel or the bug is old itself
without resolution.
If you can reproduce it with
- the current version in unstable/testing
- the latest kernel from backports
please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.
Regards,
Salvatore
--- End Message ---
