--- Begin Message ---
Package: src:linux
Version: 3.16.7-ckt11-1+deb8u3
Severity: important
Dear Maintainer,
Using the nouveau kernel driver always results in a black screen upon
framebuffer handover approx. 15 seconds into boot. The hardware is a GeForce Go
6100 with an MCP61 southbridge on a Gateway MT3419 laptop. The backlight
continues to brighten and dim as the X server starts, but nothing is displayed
on screen after nouveau is initialized. The only workarounds are to use vesa
with nomodeset or to use the NVidia proprietary driver. To get a working
display, nomodeset must be added to the kernel command line. This seems to be a
known problem, but has never been fixed. All distros and all kernels show the
same behavior. (I believe OpenSuSE Leap worked correctly one time, but I don't
have it available to test again.)
I have detailed dmesg logs that can be attached, and I will mark in the logs
the last thing I see before the screen goes black.
Obviously, this is a fairly serious bug, since the use of nouveau is made
impossible on certain chipsets. Also, it is obviously upstream, since it
happens in all distros.
-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version
4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1+deb8u3 (2015-08-04)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64
root=UUID=1762fbe0-bcda-4516-82c6-f199f522de14 ro nomodeset quiet
** Not tainted
** Kernel log:
[ 2.029894] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.029928] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.107351] sda: sda1 sda2 < sda5 sda6 > sda3
[ 2.108152] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.885904] PM: Starting manual resume from disk
[ 2.885913] PM: Hibernation image partition 8:6 present
[ 2.885916] PM: Looking for hibernation image.
[ 2.886246] PM: Image not found (code -22)
[ 2.886248] PM: Hibernation image not present or could not be loaded.
[ 3.127999] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
(null)
[ 3.617419] random: nonblocking pool is initialized
[ 7.924757] fuse init (API version 7.23)
[ 8.475555] systemd-udevd[157]: starting version 215
[ 10.214045] ACPI: processor limited to max C-state 1
[ 10.419550] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 10.419560] ACPI: Power Button [PWRB]
[ 10.419642] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 10.419646] ACPI: Sleep Button [SLPB]
[ 10.419714] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 10.420044] ACPI: Lid Switch [LID]
[ 10.420159] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 10.420163] ACPI: Power Button [PWRF]
[ 10.452384] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 10.547395] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS
[ 10.547458] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 10.547543] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial
brightness
[ 10.567222] acpi device:02: registered as cooling_device2
[ 10.567303] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6
[ 10.571491] ACPI: Battery Slot [BAT0] (battery present)
[ 10.917950] ACPI: AC Adapter [AC] (on-line)
[ 10.966234] i2c i2c-0: nForce2 SMBus adapter at 0x3040
[ 10.966275] i2c i2c-1: nForce2 SMBus adapter at 0x3000
[ 11.405473] nv_tco: NV TCO WatchDog Timer Driver v0.01
[ 11.405604] nv_tco: Watchdog reboot not detected
[ 11.405695] nv_tco: initialized (0x1440). heartbeat=30 sec (nowayout=0)
[ 11.573319] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.585893] systemd-journald[150]: Received request to flush runtime journal
from PID 1
[ 11.915541] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
[ 11.915572] snd_hda_intel 0000:00:10.1: Disabling MSI
[ 11.972702] cfg80211: Calling CRDA to update world regulatory domain
[ 12.164420] psmouse serio1: synaptics: Touchpad model: 1, fw: 5.9, id:
0x23aeb3, caps: 0xa04713/0x10008/0x0, board id: 0, fw id: 28762
[ 12.174163] [drm] Initialized drm 1.1.0 20060810
[ 12.190541] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 12.206764] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input7
[ 12.262339] wmi: Mapper loaded
[ 12.561980] k8temp 0000:00:18.3: Temperature readouts might be wrong - check
erratum #141
[ 12.797432] EDAC MC: Ver: 3.0.0
[ 12.963850] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
[ 13.142972] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 13.143270] ieee80211 phy0: hwaddr 00c0a8e3f6d6, RTL8185vD + rtl8225
[ 13.389133] MCE: In-kernel MCE decoding enabled.
[ 13.435980] kvm: Nested Virtualization enabled
[ 13.518854] powernow_k8: fid 0x8 (1600 MHz), vid 0x13
[ 13.518860] powernow_k8: fid 0x0 (800 MHz), vid 0x1e
[ 13.518952] powernow_k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology
TL-52 (2 cpu cores) (version 2.20.00)
[ 13.555610] AMD64 EDAC driver v3.4.0
[ 13.555660] EDAC amd64: DRAM ECC disabled.
[ 13.555667] EDAC amd64: ECC disabled in the BIOS or no ECC capability,
module will not load.
Either enable ECC checking or force module loading by setting
'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 14.148115] sound hdaudioC0D0: autoconfig: line_outs=1 (0xe/0x0/0x0/0x0/0x0)
type:speaker
[ 14.148132] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 14.148140] sound hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 14.148147] sound hdaudioC0D0: mono: mono_out=0x0
[ 14.148152] sound hdaudioC0D0: inputs:
[ 14.148160] sound hdaudioC0D0: Mic=0x10
[ 14.572308] input: HDA NVidia Mic as
/devices/pci0000:00/0000:00:10.1/sound/card0/input9
[ 15.529293] cfg80211: World regulatory domain updated:
[ 15.529309] cfg80211: DFS Master region: unset
[ 15.529314] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 15.529322] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 15.529329] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 15.529335] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm), (N/A)
[ 15.529342] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 15.529350] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 15.529356] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[ 15.529362] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 15.529368] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 16.379200] Adding 1472508k swap on /dev/sda6. Priority:-1 extents:1
across:1472508k FS
[ 17.399040] RPC: Registered named UNIX socket transport module.
[ 17.399053] RPC: Registered udp transport module.
[ 17.399058] RPC: Registered tcp transport module.
[ 17.399063] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 17.458600] FS-Cache: Loaded
[ 17.558217] FS-Cache: Netfs 'nfs' registered for caching
[ 17.673056] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 24.641269] forcedeth 0000:00:14.0 eth0: no link during initialization
[ 24.641968] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.008186] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.175345] wlan0: authenticate with 00:40:77:bb:55:12
[ 30.288134] wlan0: send auth to 00:40:77:bb:55:12 (try 1/3)
[ 30.289885] wlan0: authenticated
[ 30.292175] wlan0: associate with 00:40:77:bb:55:12 (try 1/3)
[ 30.295602] wlan0: RX AssocResp from 00:40:77:bb:55:12 (capab=0x1 status=0
aid=4)
[ 30.295679] wlan0: associated
[ 30.295745] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 479.463606] UDF-fs: warning (device sr0): udf_fill_super: No partition found
(2)
[ 479.525843] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 479.560936] ISO 9660 Extensions: RRIP_1991A
[ 624.913306] VFS: busy inodes on changed media or resized disk sr0
** Model information
sys_vendor: GATEWAY
product_name: MT3419
product_version: REFERENCE
chassis_vendor: Gateway
chassis_version: N/A
bios_vendor: Phoenix Technologies Ltd.
bios_version: 79.10
board_vendor: GATEWAY
board_name:
board_version: REFERENCE
** Loaded modules:
nls_utf8
isofs
udf
crc_itu_t
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
snd_hda_codec_hdmi
snd_hda_codec_idt
snd_hda_codec_generic
nouveau
powernow_k8
kvm_amd
edac_mce_amd
arc4
kvm
rtl818x_pci
joydev
eeprom_93cx6
mac80211
edac_core
k8temp
mxm_wmi
wmi
ttm
drm_kms_helper
pcspkr
drm
cfg80211
snd_hda_intel
snd_hda_controller
i2c_algo_bit
snd_hda_codec
evdev
shpchp
snd_hwdep
psmouse
nv_tco
snd_pcm
rfkill
serio_raw
snd_timer
i2c_nforce2
i2c_core
ac
snd
soundcore
video
battery
button
processor
thermal_sys
fuse
autofs4
ext4
crc16
mbcache
jbd2
sd_mod
crc_t10dif
crct10dif_generic
sg
crct10dif_common
sr_mod
cdrom
ata_generic
ohci_pci
pata_amd
ohci_hcd
forcedeth
ehci_pci
ehci_hcd
libata
usbcore
scsi_mod
usb_common
** PCI devices:
00:00.0 RAM memory [0500]: NVIDIA Corporation C51 Host Bridge [10de:02f3] (rev
a2)
Subsystem: Gateway, Inc. Device [107b:0317]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:00.1 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 0
[10de:02fa] (rev a2)
Subsystem: Gateway, Inc. Device [107b:0317]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:00.2 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 1
[10de:02fe] (rev a2)
Subsystem: Gateway, Inc. Device [107b:0317]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:00.3 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 5
[10de:02f8] (rev a2)
Subsystem: Gateway, Inc. Device [107b:0317]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:00.4 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 4
[10de:02f9] (rev a2)
Subsystem: Gateway, Inc. Device [107b:0317]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.5 RAM memory [0500]: NVIDIA Corporation C51 Host Bridge [10de:02ff] (rev
a2)
Subsystem: Gateway, Inc. Device [107b:0317]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:00.6 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 3
[10de:027f] (rev a2)
Subsystem: Gateway, Inc. Device [107b:0317]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:00.7 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 2
[10de:027e] (rev a2)
Subsystem: Gateway, Inc. Device [107b:0317]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:03.0 PCI bridge [0604]: NVIDIA Corporation C51 PCI Express Bridge
[10de:02fd] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fa100000-fa8fffff
Prefetchable memory behind bridge: 00000000bdf00000-00000000bfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 VGA compatible controller [0300]: NVIDIA Corporation C51 [GeForce Go
6100] [10de:0247] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Gateway, Inc. Device [107b:0317]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: Memory at b2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at b1000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at 80000000 [disabled] [size=128K]
Capabilities: <access denied>
00:09.0 RAM memory [0500]: NVIDIA Corporation MCP51 Host Bridge [10de:0270]
(rev a2)
Subsystem: Gateway, Inc. Device [107b:0317]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:0a.0 ISA bridge [0601]: NVIDIA Corporation MCP51 LPC Bridge [10de:0260] (rev
a3)
Subsystem: Gateway, Inc. Device [107b:0317]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:0a.1 SMBus [0c05]: NVIDIA Corporation MCP51 SMBus [10de:0264] (rev a3)
Subsystem: Gateway, Inc. Device [107b:0317]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 3040 [size=64]
Region 5: I/O ports at 3000 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:0a.3 Co-processor [0b40]: NVIDIA Corporation MCP51 PMU [10de:0271] (rev a3)
Subsystem: Gateway, Inc. Device [107b:0317]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 10
Region 0: Memory at b0040000 (32-bit, non-prefetchable) [size=256K]
00:0b.0 USB controller [0c03]: NVIDIA Corporation MCP51 USB Controller
[10de:026d] (rev a3) (prog-if 10 [OHCI])
Subsystem: Gateway, Inc. Device [107b:0317]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at b0004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci-pci
00:0b.1 USB controller [0c03]: NVIDIA Corporation MCP51 USB Controller
[10de:026e] (rev a3) (prog-if 20 [EHCI])
Subsystem: Gateway, Inc. Device [107b:0317]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at b0005000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:0d.0 IDE interface [0101]: NVIDIA Corporation MCP51 IDE [10de:0265] (rev f1)
(prog-if 8a [Master SecP PriP])
Subsystem: Gateway, Inc. Device [107b:0317]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
Region 4: I/O ports at 3080 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_amd
00:10.0 PCI bridge [0604]: NVIDIA Corporation MCP51 PCI Bridge [10de:026f] (rev
a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=64
I/O behind bridge: 00006000-00006fff
Memory behind bridge: b3400000-b34fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:10.1 Audio device [0403]: NVIDIA Corporation MCP51 High Definition Audio
[10de:026c] (rev a2)
Subsystem: Gateway, Inc. Device [107b:0317]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 20
Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.0 Bridge [0680]: NVIDIA Corporation MCP51 Ethernet Controller [10de:0269]
(rev a3)
Subsystem: Gateway, Inc. Device [107b:0317]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at b0006000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 3090 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8
[Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8
[Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8
[Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
06:09.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8185
IEEE 802.11a/b/g Wireless LAN Controller [10ec:8185] (rev 20)
Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:8225]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 6000 [size=256]
Region 1: Memory at b3400000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: rtl818x_pci
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 8.2
Architecture: amd64 (x86_64)
Kernel: Linux 3.16.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 18-3
ii linux-base 3.5
Versions of packages linux-image-3.16.0-4-amd64 recommends:
pn firmware-linux-free <none>
pn irqbalance <none>
Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-22
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true
linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false
linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:
dmesg.log
Description: Binary data
--- End Message ---
