Your message dated Sun, 02 May 2021 17:16:31 +0200 with message-id <E1ldDpP-001Mea-Ez@hullmann.westfalen.local> and subject line Closing this bug has caused the Debian Bug report #808981, regarding linux-image-4.3.0-1-amd64: USB Keyboard and mouse not working when plugged on boot. to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 808981: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=808981 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
--- Begin Message ---Package: src:linux Version: 4.3.3-2 Severity: important Tags: upstream Dear Maintainer, I boot my computer with this kernel and Keyboard (Razer Blackwidow) and Mouse are not recongnize : Read error message on USB. After these messages, the computer is booting normaly but no keyboard nor mouse. If I boot the computer with USB keyboard unplugged, and then plug keyboard when prompt appear, it's working fine. Best Regards. -- Package-specific info: ** Version: Linux version 4.3.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20151207 (Debian 5.3.1-3) ) #1 SMP Debian 4.3.3-2 (2015-12-17) ** Command line: BOOT_IMAGE=/boot/vmlinuz-4.3.0-1-amd64 root=UUID=2b8a971a-10da-438b-b51b-ea9beb4458f3 ro quiet ** Tainted: PO (4097) * Proprietary module has been loaded. * Out-of-tree module has been loaded. ** Kernel log: [ 15.344288] usb 1-1.2: Manufacturer: Razer [ 15.345821] input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:1532:010D.0004/input/input18 [ 15.401526] hid-generic 0003:1532:010D.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate] on usb-0000:00:1a.0-1.2/input0 [ 15.405354] input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:1532:010D.0005/input/input19 [ 15.461306] hid-generic 0003:1532:010D.0005: input,hidraw4: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate] on usb-0000:00:1a.0-1.2/input1 [ 15.463867] input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/0003:1532:010D.0006/input/input20 [ 15.517480] hid-generic 0003:1532:010D.0006: input,hidraw5: USB HID v1.11 Mouse [Razer Razer BlackWidow Ultimate] on usb-0000:00:1a.0-1.2/input2 [ 424.827759] [drm] Initialized drm 1.1.0 20060810 [ 424.831668] nvidia: module license 'NVIDIA' taints kernel. [ 424.831672] Disabling lock debugging due to kernel taint [ 424.840087] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 424.840369] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0 [ 424.840376] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.63 Sat Nov 7 21:25:42 PST 2015 [ 2741.289366] PM: Syncing filesystems ... done. [ 2742.038540] PM: Preparing system for sleep (mem) [ 2742.476552] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 2742.477890] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 2742.478970] PM: Suspending system (mem) [ 2742.478979] Suspending console(s) (use no_console_suspend to debug) [ 2742.479374] parport_pc 00:05: disabled [ 2742.479473] serial 00:02: disabled [ 2742.479718] sd 2:0:0:0: [sdc] Synchronizing SCSI cache [ 2742.479733] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 2742.479760] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 2742.479850] sd 2:0:0:0: [sdc] Stopping disk [ 2742.479894] sd 1:0:0:0: [sdb] Stopping disk [ 2742.479943] sd 0:0:0:0: [sda] Stopping disk [ 2743.341006] PM: suspend of devices complete after 861.941 msecs [ 2743.341386] PM: late suspend of devices complete after 0.377 msecs [ 2743.341803] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 2743.341957] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 2743.356971] PM: noirq suspend of devices complete after 15.581 msecs [ 2743.357383] ACPI: Preparing to enter system sleep state S3 [ 2743.358012] PM: Saving platform NVS memory [ 2743.358016] Disabling non-boot CPUs ... [ 2743.358310] Broke affinity for irq 16 [ 2743.358318] Broke affinity for irq 19 [ 2743.359342] smpboot: CPU 1 is now offline [ 2743.359997] Broke affinity for irq 16 [ 2743.360004] Broke affinity for irq 19 [ 2743.361036] smpboot: CPU 2 is now offline [ 2743.361956] Broke affinity for irq 16 [ 2743.361964] Broke affinity for irq 19 [ 2743.362992] smpboot: CPU 3 is now offline [ 2743.364390] ACPI: Low-level resume complete [ 2743.364422] PM: Restoring platform NVS memory [ 2743.364725] Enabling non-boot CPUs ... [ 2743.364774] x86: Booting SMP configuration: [ 2743.364774] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 2743.377863] cache: parent cpu1 should not be sleeping [ 2743.378002] CPU1 is up [ 2743.378035] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 2743.391225] cache: parent cpu2 should not be sleeping [ 2743.391361] CPU2 is up [ 2743.391392] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 2743.404601] cache: parent cpu3 should not be sleeping [ 2743.404736] CPU3 is up [ 2743.406790] ACPI: Waking up from system sleep state S3 [ 2743.422300] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 2743.422402] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 2743.422465] PM: noirq resume of devices complete after 15.405 msecs [ 2743.422630] PM: early resume of devices complete after 0.154 msecs [ 2743.423241] serial 00:02: activated [ 2743.423244] rtc_cmos 00:03: System wakeup disabled by ACPI [ 2743.423527] parport_pc 00:05: activated [ 2743.430620] sd 0:0:0:0: [sda] Starting disk [ 2743.430621] sd 2:0:0:0: [sdc] Starting disk [ 2743.431185] sd 1:0:0:0: [sdb] Starting disk [ 2743.621441] PM: resume of devices complete after 198.809 msecs [ 2743.621570] PM: Finishing wakeup. [ 2743.621571] Restarting tasks ... done. [ 2743.914264] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2743.922360] ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 2743.922365] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 2743.922368] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 2743.938328] ata4.00: configured for UDMA/100 [ 2744.782213] ata1.01: failed to resume link (SControl 0) [ 2744.782297] ata2.01: failed to resume link (SControl 0) [ 2746.087088] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<1000 Mbps Full Duplex> [ 2746.850248] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2746.850262] ata1.01: SATA link down (SStatus 0 SControl 0) [ 2746.874466] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 2746.874472] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 2746.966062] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 2746.966075] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 2746.982579] ata1.00: configured for UDMA/133 [ 2747.126219] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2747.126233] ata2.01: SATA link down (SStatus 0 SControl 0) [ 2747.138399] ata2.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 2747.138403] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 2747.215243] ata2.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 2747.215249] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 2747.218270] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2747.230498] ata2.00: configured for UDMA/133 [ 2747.242306] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 2747.242310] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 2747.338908] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 2747.338914] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 2747.354568] ata3.00: configured for UDMA/133 [ 2748.276979] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<1000 Mbps Full Duplex> ** Model information sys_vendor: MSI product_name: MS-7680 product_version: 3.0 chassis_vendor: MSI chassis_version: 3.0 bios_vendor: American Megatrends Inc. bios_version: V17.6 board_vendor: MSI board_name: H61M-P23 (MS-7680) board_version: 3.0 ** Loaded modules: nvidia(PO) drm binfmt_misc pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm joydev crct10dif_pclmul crc32_pclmul sha256_ssse3 sha256_generic hmac drbg ansi_cprng aesni_intel psmouse serio_raw aes_x86_64 snd_hda_codec_hdmi evdev lrw iTCO_wdt gf128mul glue_helper ppdev ablk_helper iTCO_vendor_support pcspkr cryptd sg 8250_fintek shpchp snd_hda_codec_via snd_hda_codec_generic parport_pc parport processor snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep lpc_ich mfd_core mei_me mei snd_pcm snd_timer snd soundcore tpm_infineon tpm_tis i2c_i801 tpm button autofs4 ext4 crc16 mbcache jbd2 sr_mod cdrom sd_mod hid_generic ata_generic usbhid hid ata_piix crc32c_intel libata ehci_pci ehci_hcd scsi_mod atl1c usbcore usb_common ** Network interface configuration: source /etc/network/interfaces.d/* auto lo iface lo inet loopback allow-hotplug eth0 iface eth0 inet dhcp ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 6c:62:6d:3e:ba:38 brd ff:ff:ff:ff:ff:ff inet 192.168.0.5/24 brd 192.168.0.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::6e62:6dff:fe3e:ba38/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed eth0: 87222429 66382 0 1 0 0 0 126 13594718 47169 0 0 0 0 2 0 lo: 524742 3688 0 0 0 0 0 0 524742 3688 0 0 0 0 0 0 *** Protocol statistics: Ip: Forwarding: 2 70188 total packets received 17 with invalid addresses 0 forwarded 0 incoming packets discarded 70047 incoming packets delivered 47489 requests sent out 152 dropped because of missing route Icmp: 0 ICMP messages received 0 input ICMP message failed. ICMP input histogram: 1 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 1 IcmpMsg: OutType3: 1 Tcp: 719 active connections openings 368 passive connection openings 24 failed connection attempts 73 connection resets received 16 connections established 69063 segments received 49917 segments send out 34 segments retransmited 2 bad segments received. 208 resets sent Udp: 1197 packets received 1 packets to unknown port received. 0 packet receive errors 791 packets sent 0 receive buffer errors 0 send buffer errors IgnoredMulti: 20 UdpLite: TcpExt: 467 TCP sockets finished time wait in fast timer 1 packets rejects in established connections because of timestamp 340 delayed acks sent Quick ack mode was activated 193 times 2 packets directly queued to recvmsg prequeue. TCPDirectCopyFromPrequeue: 808 54525 packet headers predicted 2 packets header predicted and directly queued to user 2906 acknowledgments not containing data payload received 2418 predicted acknowledgments 1 congestion windows recovered without slow start after partial ack TCPTimeouts: 6 TCPLossProbes: 19 TCPLossProbeRecovery: 1 TCPDSACKOldSent: 193 TCPDSACKRecv: 18 34 connections reset due to unexpected data 52 connections reset due to early user close TCPDSACKIgnoredNoUndo: 17 TCPRcvCoalesce: 5228 TCPOFOQueue: 3704 TCPChallengeACK: 2 TCPSYNChallenge: 2 TCPAutoCorking: 271 TCPSynRetrans: 12 TCPOrigDataSent: 11098 TCPHystartTrainDetect: 1 TCPHystartTrainCwnd: 20 TCPHystartDelayDetect: 1 TCPHystartDelayCwnd: 28 TCPKeepAlive: 436 IpExt: InMcastPkts: 1 OutMcastPkts: 10 InBcastPkts: 488 OutBcastPkts: 275 InOctets: 86864297 OutOctets: 13314904 InMcastOctets: 69 OutMcastOctets: 400 InBcastOctets: 67568 OutBcastOctets: 44192 InNoECTPkts: 70188 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] (rev 09) Subsystem: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: snb_uncore 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 24 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f8000000-fa0fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dbffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7680] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 27 Region 0: Memory at fa207000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei_me 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7680] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fa206000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7680] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 28 Region 0: Memory at fa200000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 25 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 26 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fa100000-fa1fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7680] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fa205000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1f.0 ISA bridge [0601]: Intel Corporation H61 Express Chipset Family LPC Controller [8086:1c5c] (rev 05) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7680] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 IDE interface [0101]: Intel Corporation 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller [8086:1c00] (rev 05) (prog-if 8a [Master SecP PriP]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7680] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 Region 4: I/O ports at f090 [size=16] Region 5: I/O ports at f080 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7680] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at fa204000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at f000 [size=32] Kernel driver in use: i801_smbus 00:1f.5 IDE interface [0101]: Intel Corporation 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller [8086:1c08] (rev 05) (prog-if 85 [Master SecO PriO]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7680] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at f070 [size=8] Region 1: I/O ports at f060 [size=4] Region 2: I/O ports at f050 [size=8] Region 3: I/O ports at f040 [size=4] Region 4: I/O ports at f030 [size=16] Region 5: I/O ports at f020 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF100 [GeForce GTX 465] [10de:06c4] (rev a3) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:2221] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 30 Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at d8000000 (64-bit, prefetchable) [size=64M] Region 5: I/O ports at e000 [size=128] [virtual] Expansion ROM at fa000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia 01:00.1 Audio device [0403]: NVIDIA Corporation GF100 High Definition Audio Controller [10de:0be5] (rev a1) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:2221] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fa080000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7680] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 29 Region 0: Memory at fa100000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at d000 [size=128] Capabilities: <access denied> Kernel driver in use: atl1c ** USB devices: Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 1532:0037 Razer USA, Ltd Bus 001 Device 004: ID 1532:010d Razer USA, Ltd Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: stretch/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.3.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.3.0-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.58 ii initramfs-tools [linux-initramfs-tool] 0.120 ii kmod 21-1 ii linux-base 4.0 Versions of packages linux-image-4.3.0-1-amd64 recommends: ii firmware-linux-free 3.4 ii irqbalance 1.0.9-1 Versions of packages linux-image-4.3.0-1-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02~beta2-33 pn linux-doc-4.3 <none> Versions of packages linux-image-4.3.0-1-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-4.3.0-1-amd64/prerm/removing-running-kernel-4.3.0-1-amd64: true linux-image-4.3.0-1-amd64/postinst/mips-initrd-4.3.0-1-amd64: linux-image-4.3.0-1-amd64/postinst/depmod-error-initrd-4.3.0-1-amd64: false
--- End Message ---
--- Begin Message ---This bug was filed for a very old kernel. If you can reproduce it with - the current version in unstable/testing - the latest kernel from buster.backports please reopen the bug, see https://www.debian.org/Bugs/server-control
--- End Message ---
