Your message dated Sat, 24 Apr 2021 23:51:21 -0700 (PDT)
with message-id <60851169.1c69fb81.ee8f7.6...@mx.google.com>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #749017,
regarding linux-image-3.14-0.bpo.1-amd64: backlight too dim on i915 at boot
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)


-- 
749017: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=749017
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 3.14.4-1~bpo70+1
Severity: normal

On boot, the backlight on my Dell Latitude D830 is too dim.

Workaround #1: use kernel-3.13.

Workaround #2: echo 0 > /sys/class/backlight/intel_backlight/brightness
(this must be done at boot, after each resume, and after each invocation of
xrandr)



-- Package-specific info:
** Version:
Linux version 3.14-0.bpo.1-amd64 (debian-kernel@lists.debian.org) (gcc version 
4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.14.4-1~bpo70+1 (2014-05-14)

** Command line:
root=/dev/mapper/VG0-ROOT ro i915.invert_brightness=1

** Tainted: O (4096)
 * Out-of-tree module has been loaded.

** Kernel log:
[   20.509292] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: 
[mem 0xf6800000-0xf68fffff]
[   20.509367] pcmcia_socket pcmcia_socket0: cs: memory probe 
0xf6800000-0xf68fffff:
[   20.509447]  excluding 0xf68f0000-0xf68fffff
[   20.603588] tpm_tis 00:09: 1.2 TPM (device-id 0x1002, rev-id 2)
[   20.648171] tpm_tis 00:09: Adjusting TPM timeout parameters.
[   20.989973] [drm] Initialized drm 1.1.0 20060810
[   21.048972] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection 
driver for Linux, in-tree:s
[   21.049055] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[   21.049176] iwl3945 0000:0c:00.0: can't disable ASPM; OS doesn't have ASPM 
control
[   21.105448] iwl3945 0000:0c:00.0: Tunable channels: 11 802.11bg, 13 802.11a 
channels
[   21.105532] iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG
[   21.105676] iwl3945 0000:0c:00.0: irq 44 for MSI/MSI-X
[   21.159649] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[   21.421374] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   21.421447]  excluding 0xc0000-0xcffff 0xe0000-0xfffff
[   21.421674] pcmcia_socket pcmcia_socket0: cs: memory probe 
0xa0000000-0xa0ffffff:
[   21.421760]  excluding 0xa0000000-0xa0ffffff
[   21.421933] pcmcia_socket pcmcia_socket0: cs: memory probe 
0x60000000-0x60ffffff:
[   21.422018]  excluding 0x60000000-0x60ffffff
[   21.721912] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   21.986183] [drm] Memory usable by graphics device = 512M
[   22.009771] input: HDA Digital PCBeep as 
/devices/pci0000:00/0000:00:1b.0/input/input8
[   22.022311] input: HDA Intel Headphone as 
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   22.022915] input: HDA Intel Mic as 
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   22.056074] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[   22.056090] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   22.056161] [drm] Driver supports precise vblank timestamp query.
[   22.056289] vgaarb: device changed decodes: 
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   22.241005] [drm] initialized overlay support
[   22.372225] input: DualPoint Stick as 
/devices/platform/i8042/serio1/input/input7
[   22.393408] input: AlpsPS/2 ALPS DualPoint TouchPad as 
/devices/platform/i8042/serio1/input/input6
[   22.412965] fbcon: inteldrmfb (fb0) is primary device
[   22.982857] cfg80211: World regulatory domain updated:
[   22.982859] cfg80211:  DFS Master region: unset
[   22.982860] cfg80211:   (start_freq - end_freq @ bandwidth), 
(max_antenna_gain, max_eirp)
[   22.982862] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 
2000 mBm)
[   22.982864] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 
2000 mBm)
[   22.982865] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 
2000 mBm)
[   22.982866] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 
2000 mBm)
[   22.982868] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 
2000 mBm)
[   23.299928] Console: switching to colour frame buffer device 240x75
[   23.306753] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   23.306787] i915 0000:00:02.0: registered panic notifier
[   23.307009] ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
[   23.307450] input: Video Bus as 
/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input11
[   23.307579] [Firmware Bug]: Duplicate ACPI video bus devices for the same 
VGA controller, please try module parameter "video.allow_duplicates=1"if the 
current driver doesn't work.
[   23.307684] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   24.459192] EXT4-fs (dm-2): re-mounted. Opts: (null)
[   24.590771] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro
[   24.974259] loop: module loaded
[   25.606902] Adding 2097140k swap on /dev/mapper/VG0-SWAP.  Priority:-1 
extents:1 across:2097140k 
[   26.978390] NET: Registered protocol family 4
[   27.159919] ip_tables: (C) 2000-2006 Netfilter Core Team
[   27.203194] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   27.408865] Bridge firewalling registered
[   31.425617] fuse init (API version 7.22)
[   32.200743] tg3 0000:09:00.0: irq 47 for MSI/MSI-X
[   32.236136] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   32.976844] input: ACPI Virtual Keyboard Device as 
/devices/virtual/input/input12
[   41.543862] iwl3945 0000:0c:00.0: firmware: direct-loading firmware 
iwlwifi-3945-2.ucode
[   41.543933] iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9
[   41.614484] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   42.803112] lp: driver loaded but no devices found
[   42.834563] ppdev: user-space parallel port driver
[   55.507765] vboxdrv: Found 2 processor cores.
[   55.508492] vboxdrv: fAsync=0 offMin=0x1ae offMax=0x3052
[   55.508622] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 
'normal'.
[   55.508624] vboxdrv: Successfully loaded version 4.2.24 (interface 
0x001a0007).
[   55.891362] vboxpci: IOMMU not found (not registered)
[   59.208777] WARNING! power/level is deprecated; use power/control instead
[  484.380063] perf samples too long (2504 > 2500), lowering 
kernel.perf_event_max_sample_rate to 50000
[  484.382211] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 
2.150 msecs
[  892.156678] wlan0: authenticate with 64:70:02:5c:6a:c4
[  892.160335] wlan0: send auth to 64:70:02:5c:6a:c4 (try 1/3)
[  892.162565] wlan0: authenticated
[  892.162591] iwl3945 0000:0c:00.0 wlan0: disabling HT as WMM/QoS is not 
supported by the AP
[  892.162594] iwl3945 0000:0c:00.0 wlan0: disabling VHT as WMM/QoS is not 
supported by the AP
[  892.164095] wlan0: associate with 64:70:02:5c:6a:c4 (try 1/3)
[  892.166716] wlan0: RX AssocResp from 64:70:02:5c:6a:c4 (capab=0x411 status=0 
aid=4)
[  892.168323] wlan0: associated
[  892.168354] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  892.168415] cfg80211: Calling CRDA for country: US
[  892.173200] cfg80211: Regulatory domain changed to country: US
[  892.173205] cfg80211:  DFS Master region: unset
[  892.173207] cfg80211:   (start_freq - end_freq @ bandwidth), 
(max_antenna_gain, max_eirp)
[  892.173210] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 
2700 mBm)
[  892.173212] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 
1700 mBm)
[  892.173215] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 
2000 mBm)
[  892.173217] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 
2000 mBm)
[  892.173219] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 
2000 mBm)
[  892.173221] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 
3000 mBm)
[  983.772937] nspr-2: sending ioctl 5393 to a partition!
[  983.772967] nspr-2: sending ioctl 5393 to a partition!
[  984.974319] warning: `VirtualBox' uses 32-bit capabilities (legacy support 
in use)
[  988.875061] nspr-3: sending ioctl 5393 to a partition!
[  988.875094] nspr-3: sending ioctl 5393 to a partition!
[ 1015.698331] device vbox entered promiscuous mode
[ 1040.436013] hrtimer: interrupt took 3896697 ns
[ 1057.705784] usb 7-2: USB disconnect, device number 2
[ 1496.592318] CE: hpet increased min_delta_ns to 20115 nsec

** Model information
sys_vendor: Dell Inc.
product_name: Latitude D830                   
product_version: 
chassis_vendor: Dell Inc.
chassis_version: 
bios_vendor: Dell Inc.
bios_version: A14
board_vendor: Dell Inc.
board_name: 0HN341
board_version:    

** Loaded modules:
ipt_MASQUERADE
ctr
ccm
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
cpufreq_powersave
cpufreq_conservative
cpufreq_userspace
cpufreq_stats
ppdev
lp
uinput
fuse
bridge
stp
iptable_nat
nf_conntrack_ipv4
nf_defrag_ipv4
nf_nat_ipv4
nf_nat
nf_conntrack
iptable_filter
ip_tables
x_tables
ipx
p8022
psnap
llc
p8023
fan
i8k
firewire_sbp2
loop
joydev
snd_hda_codec_idt
i915
snd_hda_codec_generic
snd_hda_intel
snd_hda_codec
drm_kms_helper
snd_hwdep
arc4
pcmcia
iwl3945
snd_pcm
psmouse
iwlegacy
drm
i2c_algo_bit
tpm_tis
i2c_i801
yenta_socket
coretemp
pcmcia_rsrc
i2c_core
dell_laptop
lpc_ich
snd_seq
snd_timer
tpm
acpi_cpufreq
serio_raw
dell_wmi
pcmcia_core
mfd_core
dcdbas
snd_seq_device
sparse_keymap
parport_pc
parport
wmi
kvm_intel
evdev
kvm
snd
mac80211
cfg80211
video
rfkill
soundcore
processor
battery
button
ac
ext4
jbd2
mbcache
crc16
sha256_ssse3
sha256_generic
cbc
dm_crypt
dm_mod
lzo
sg
sr_mod
cdrom
sd_mod
crct10dif_generic
crc_t10dif
crct10dif_common
usb_storage
ata_generic
ehci_pci
firewire_ohci
tg3
thermal
ata_piix
uhci_hcd
ehci_hcd
firewire_core
crc_itu_t
thermal_sys
libata
libphy
ptp
pps_core
usbcore
scsi_mod
usb_common

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory 
Controller Hub [8086:2a00] (rev 0c)
        Subsystem: Dell Device [1028:01fe]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 
Integrated Graphics Controller [8086:2a02] (rev 0c) (prog-if 00 [VGA 
controller])
        Subsystem: Dell Device [1028:01fe]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 46
        Region 0: Memory at f6e00000 (64-bit, non-prefetchable) [size=1M]
        Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at efe8 [size=8]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: <access denied>
        Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 
Integrated Graphics Controller [8086:2a03] (rev 0c)
        Subsystem: Dell Device [1028:01fe]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Region 0: Memory at f6f00000 (64-bit, non-prefetchable) [size=1M]
        Capabilities: <access denied>

00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell Device [1028:01fe]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 4: I/O ports at 6f20 [size=32]
        Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell Device [1028:01fe]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 21
        Region 4: I/O ports at 6f00 [size=32]
        Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI 
Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
        Subsystem: Dell Device [1028:01fe]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 22
        Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio 
Controller [8086:284b] (rev 02)
        Subsystem: Dell Device [1028:01fe]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 45
        Region 0: Memory at f6dfc000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express 
Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: f0600000-f07fffff
        Prefetchable memory behind bridge: 00000000f0800000-00000000f09fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express 
Port 2 [8086:2841] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: f6c00000-f6cfffff
        Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express 
Port 4 [8086:2845] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: f6a00000-f6bfffff
        Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express 
Port 6 [8086:2849] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
        I/O behind bridge: 00004000-00004fff
        Memory behind bridge: f6900000-f69fffff
        Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell Device [1028:01fe]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 4: I/O ports at 6f80 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell Device [1028:01fe]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 21
        Region 4: I/O ports at 6f60 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell Device [1028:01fe]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 22
        Region 4: I/O ports at 6f40 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI 
Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
        Subsystem: Dell Device [1028:01fe]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge 
[8086:2448] (rev f2) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
        I/O behind bridge: 00005000-00005fff
        Memory behind bridge: f6800000-f68fffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR+
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface 
Controller [8086:2815] (rev 02)
        Subsystem: Dell Device [1028:01fe]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: lpc_ich

00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) 
IDE Controller [8086:2850] (rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: Dell Device [1028:01fe]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at 6fa0 [size=16]
        Kernel driver in use: ata_piix

00:1f.2 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) 
SATA IDE Controller [8086:2828] (rev 02) (prog-if 8f [Master SecP SecO PriP 
PriO])
        Subsystem: Dell Device [1028:01fe]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 0: I/O ports at 6eb0 [size=8]
        Region 1: I/O ports at 6eb8 [size=4]
        Region 2: I/O ports at 6ec0 [size=8]
        Region 3: I/O ports at 6ec8 [size=4]
        Region 4: I/O ports at 6ee0 [size=16]
        Region 5: I/O ports at eff0 [size=16]
        Capabilities: <access denied>
        Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller 
[8086:283e] (rev 02)
        Subsystem: Dell Device [1028:01fe]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at f6dfbf00 (32-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at 10c0 [size=32]
        Kernel driver in use: i801_smbus

03:01.0 CardBus bridge [0607]: O2 Micro, Inc. Cardbus bridge [1217:7135] (rev 
21)
        Subsystem: Dell Device [1028:01fe]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping+ SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 168
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
        Memory window 0: f0c00000-f0fff000 (prefetchable)
        Memory window 1: f1000000-f13ff000
        I/O window 0: 00005000-000050ff
        I/O window 1: 00005400-000054ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001
        Kernel driver in use: yenta_cardbus

03:01.4 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Firewire (IEEE 1394) 
[1217:00f7] (rev 02) (prog-if 10 [OHCI])
        Subsystem: Dell Device [1028:01fe]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx+
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at f68ff000 (32-bit, non-prefetchable) [size=4K]
        Region 1: Memory at f68fe800 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: firewire_ohci

09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5755M 
Gigabit Ethernet PCI Express [14e4:1673] (rev 02)
        Subsystem: Dell Device [1028:01fe]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 47
        Region 0: Memory at f69f0000 (64-bit, non-prefetchable) [size=64K]
        Expansion ROM at <ignored> [disabled]
        Capabilities: <access denied>
        Kernel driver in use: tg3

0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG 
[Golan] Network Connection [8086:4222] (rev 02)
        Subsystem: Intel Corporation Device [8086:1020]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 44
        Region 0: Memory at f6cff000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: iwl3945


** USB devices:
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 003: ID 0b97:7772 O2 Micro, Inc. OZ776 CCID Smartcard Reader
Bus 005 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: 6.0.9
  APT prefers oldstable
  APT policy: (990, 'oldstable'), (105, 'proposed-updates'), (105, 
'oldstable-proposed-updates')
Architecture: amd64 (x86_64)

Kernel: Linux 3.14-0.bpo.1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-3.14-0.bpo.1-amd64 depends on:
ii  debconf [debconf-2.0]      1.5.36.1      Debian configuration management sy
ii  initramfs-tools [linux-ini 0.115~bpo70+1 generic modular initramfs generato
ii  linux-base                 3.4~bpo60+1   Linux image base package
ii  module-init-tools          3.12-2        tools for managing Linux kernel mo

Versions of packages linux-image-3.14-0.bpo.1-amd64 recommends:
ii  firmware-linux-free           3.2        Binary firmware for various driver

Versions of packages linux-image-3.14-0.bpo.1-amd64 suggests:
pn  debian-kernel-handbook        <none>     (no description available)
pn  grub-pc | extlinux | lilo     <none>     (no description available)
pn  linux-doc-3.14                <none>     (no description available)

Versions of packages linux-image-3.14-0.bpo.1-amd64 is related to:
pn  firmware-atheros            <none>       (no description available)
pn  firmware-bnx2               <none>       (no description available)
pn  firmware-bnx2x              <none>       (no description available)
pn  firmware-brcm80211          <none>       (no description available)
pn  firmware-intelwimax         <none>       (no description available)
pn  firmware-ipw2x00            <none>       (no description available)
pn  firmware-ivtv               <none>       (no description available)
ii  firmware-iwlwifi            0.41~bpo70+1 Binary firmware for Intel Wireless
pn  firmware-libertas           <none>       (no description available)
pn  firmware-linux              <none>       (no description available)
pn  firmware-linux-nonfree      <none>       (no description available)
pn  firmware-myricom            <none>       (no description available)
pn  firmware-netxen             <none>       (no description available)
pn  firmware-qlogic             <none>       (no description available)
pn  firmware-ralink             <none>       (no description available)
ii  firmware-realtek            0.41~bpo70+1 Binary firmware for Realtek wired 
pn  xen-hypervisor              <none>       (no description available)

-- debconf information excluded

--- End Message ---
--- Begin Message ---
Hi

This bug was filed for a very old kernel or the bug is old itself
without resolution.

If you can reproduce it with

- the current version in unstable/testing
- the latest kernel from backports

please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.

Regards,
Salvatore

--- End Message ---

Reply via email to