--- Begin Message ---
Package: src:linux
Version: 3.13.10-1~bpo70+1
Severity: important
Dear Maintainer,
Any attempt to connect to a WPA2 PSK network will fail with the following line
in syslog:
Apr 29 13:06:16 arlon wpa_supplicant[2871]: wlan0: WPA: 4-Way Handshake failed
- pre-shared key may be incorrect
This affects both NetworkManager and wpasupplicant, and booting to the
3.12-0.bpo.1-amd64 version fixes the issue.
This has been tested with a Nexus 4 in portable hotspot mode and a Linksys
E1200 router.
-- Package-specific info:
** Version:
Linux version 3.13-0.bpo.1-amd64 (debian-kernel@lists.debian.org) (gcc version
4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.13.10-1~bpo70+1 (2014-04-23)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.13-0.bpo.1-amd64
root=UUID=61fddc36-c770-44f0-a342-82eb7e9ddc7c ro quiet
** Not tainted
** Kernel log:
[ 4.088524] acpi device:02: registered as cooling_device5
[ 4.088639] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input18
[ 4.088880] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.090013] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 4.090194] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO
conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20131115/utaddress-251)
[ 4.090206] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 4.090213] ACPI Warning: 0x00000000000011c0-0x00000000000011cf SystemIO
conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251)
[ 4.090222] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 4.090225] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO
conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251)
[ 4.090233] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 4.090236] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO
conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251)
[ 4.090244] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 4.090247] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.094538] iTCO_vendor_support: vendor-support=0
[ 4.095168] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 4.095217] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x1060)
[ 4.095332] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.357984] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 4.391082] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 4.416158] loop: module loaded
[ 4.549436] random: nonblocking pool is initialized
[ 5.430356] Bluetooth: RFCOMM TTY layer initialized
[ 5.430372] Bluetooth: RFCOMM socket layer initialized
[ 5.430379] Bluetooth: RFCOMM ver 1.11
[ 5.432387] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.432391] Bluetooth: BNEP filters: protocol multicast
[ 5.432402] Bluetooth: BNEP socket layer initialized
[ 5.476893] lp: driver loaded but no devices found
[ 5.482368] ppdev: user-space parallel port driver
[ 5.635388] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
[ 5.739197] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
[ 5.739368] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.895552] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6.324428] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input19
[ 7.628325] wlan0: authenticate with 48:f8:b3:06:58:0b
[ 7.647443] wlan0: send auth to 48:f8:b3:06:58:0b (try 1/3)
[ 7.650336] wlan0: authenticated
[ 7.651377] wlan0: associate with 48:f8:b3:06:58:0b (try 1/3)
[ 7.654595] wlan0: RX AssocResp from 48:f8:b3:06:58:0b (capab=0x411 status=0
aid=3)
[ 7.656606] wlan0: associated
[ 7.656648] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 7.935586] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu
turbo
[ 7.945813] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10
00 64
[ 9.692969] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e,
buttons: 3/3
[ 9.983432] input: TPPS/2 IBM TrackPoint as
/devices/platform/i8042/serio1/serio2/input/input17
[ 15.722472] wlan0: deauthenticated from 48:f8:b3:06:58:0b (Reason: 15)
[ 15.742340] cfg80211: Calling CRDA to update world regulatory domain
[ 15.748136] cfg80211: World regulatory domain updated:
[ 15.748143] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 15.748149] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 15.748154] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 15.748158] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 15.748162] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 15.748165] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 16.817299] wlan0: authenticate with 48:f8:b3:06:58:0b
[ 16.836328] wlan0: send auth to 48:f8:b3:06:58:0b (try 1/3)
[ 16.837859] wlan0: authenticated
[ 16.840300] wlan0: associate with 48:f8:b3:06:58:0b (try 1/3)
[ 16.843564] wlan0: RX AssocResp from 48:f8:b3:06:58:0b (capab=0x411 status=0
aid=3)
[ 16.845582] wlan0: associated
[ 22.901195] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[ 22.994931] usb 2-1.1: New USB device found, idVendor=18d1, idProduct=4ee5
[ 22.994934] usb 2-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 22.994936] usb 2-1.1: Product: Nexus 4
[ 22.994938] usb 2-1.1: Manufacturer: LGE
[ 22.994939] usb 2-1.1: SerialNumber: 009478f8d60be77b
[ 24.913262] wlan0: deauthenticated from 48:f8:b3:06:58:0b (Reason: 15)
[ 24.948159] cfg80211: Calling CRDA to update world regulatory domain
[ 24.953911] cfg80211: World regulatory domain updated:
[ 24.953916] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 24.953921] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 24.953924] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 24.953927] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 24.953930] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 24.953933] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 26.022432] wlan0: authenticate with 48:f8:b3:06:58:0b
[ 26.041229] wlan0: send auth to 48:f8:b3:06:58:0b (try 1/3)
[ 26.042882] wlan0: authenticated
[ 26.045154] wlan0: associate with 48:f8:b3:06:58:0b (try 1/3)
[ 26.048489] wlan0: RX AssocResp from 48:f8:b3:06:58:0b (capab=0x411 status=0
aid=3)
[ 26.050500] wlan0: associated
[ 27.015851] usb 2-1.1: USB disconnect, device number 3
[ 27.213486] usb 2-1.1: new high-speed USB device number 4 using ehci-pci
[ 27.307228] usb 2-1.1: New USB device found, idVendor=18d1, idProduct=4ee3
[ 27.307234] usb 2-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 27.307239] usb 2-1.1: Product: Nexus 4
[ 27.307242] usb 2-1.1: Manufacturer: LGE
[ 27.307245] usb 2-1.1: SerialNumber: 009478f8d60be77b
[ 27.318611] usbcore: registered new interface driver cdc_ether
[ 27.321704] rndis_host 2-1.1:1.0 usb0: register 'rndis_host' at
usb-0000:00:1d.0-1.1, RNDIS device, be:9a:f6:d9:fe:47
[ 27.321751] usbcore: registered new interface driver rndis_host
[ 32.175955] wlan0: deauthenticating from 48:f8:b3:06:58:0b by local choice
(reason=3)
[ 32.207893] cfg80211: Calling CRDA to update world regulatory domain
[ 32.215254] cfg80211: World regulatory domain updated:
[ 32.215260] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 32.215264] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 32.215268] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 32.215271] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 32.215273] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 32.215276] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
** Model information
sys_vendor: LENOVO
product_name: 4313CTO
product_version: ThinkPad T510
chassis_vendor: LENOVO
chassis_version: Not Available
bios_vendor: LENOVO
bios_version: 6MET75WW (1.35 )
board_vendor: LENOVO
board_name: 4313CTO
board_version: Not Available
** Loaded modules:
rndis_host
cdc_ether
usbnet
mii
parport_pc
ppdev
lp
parport
bnep
rfcomm
uinput
loop
iTCO_wdt
iTCO_vendor_support
joydev
intel_powerclamp
coretemp
kvm_intel
kvm
crct10dif_pclmul
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
arc4
mxm_wmi
snd_hda_codec_hdmi
rtl8192se
aesni_intel
rtl_pci
aes_x86_64
rtlwifi
lrw
uvcvideo
gf128mul
snd_hda_codec_conexant
glue_helper
videobuf2_vmalloc
ablk_helper
videobuf2_memops
cryptd
lpc_ich
videobuf2_core
mac80211
evdev
videodev
mfd_core
psmouse
media
serio_raw
thinkpad_acpi
i2c_i801
pcspkr
intel_ips
i915
btusb
cfg80211
bluetooth
nvram
drm_kms_helper
snd_hda_intel
rfkill
drm
snd_hda_codec
ac
battery
tpm_tis
snd_hwdep
tpm
snd_pcm
i2c_algo_bit
i2c_core
snd_page_alloc
mei_me
snd_timer
mei
wmi
snd
soundcore
video
acpi_cpufreq
button
processor
ext4
crc16
mbcache
jbd2
sg
sd_mod
crc_t10dif
crct10dif_common
ahci
libahci
firewire_ohci
firewire_core
sdhci_pci
sdhci
crc_itu_t
libata
mmc_core
scsi_mod
ehci_pci
ehci_hcd
e1000e
ptp
pps_core
thermal
thermal_sys
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller
[8086:0044] (rev 02)
Subsystem: Lenovo Device [17aa:2193]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor
Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA
controller])
Subsystem: Lenovo Device [17aa:215a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series
Chipset HECI Controller [8086:3b64] (rev 06)
Subsystem: Lenovo Device [17aa:215f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f2827800 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:19.0 Ethernet controller [0200]: Intel Corporation 82577LM Gigabit Network
Connection [8086:10ea] (rev 06)
Subsystem: Lenovo Device [17aa:2153]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f2600000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f2625000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1820 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller [8086:3b3c] (rev 06) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:2163]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at f2828000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset
High Definition Audio [8086:3b56] (rev 06)
Subsystem: Lenovo Device [17aa:215e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 43
Region 0: Memory at f2620000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 1 [8086:3b42] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 2 [8086:3b44] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f2400000-f24fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 4 [8086:3b48] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0000000-f1ffffff
Prefetchable memory behind bridge: 00000000f2900000-00000000f29fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 5 [8086:3b4a] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
Memory behind bridge: f2500000-f25fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller [8086:3b34] (rev 06) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:2163]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at f2828400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev a6) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC
Interface Controller [8086:3b07] (rev 06)
Subsystem: Lenovo Device [17aa:2166]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset
6 port SATA AHCI Controller [8086:3b2f] (rev 06) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device [17aa:2168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 41
Region 0: I/O ports at 1860 [size=8]
Region 1: I/O ports at 1814 [size=4]
Region 2: I/O ports at 1818 [size=8]
Region 3: I/O ports at 1810 [size=4]
Region 4: I/O ports at 1840 [size=32]
Region 5: Memory at f2827000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus
Controller [8086:3b30] (rev 06)
Subsystem: Lenovo Device [17aa:2167]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f2828800 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: i801_smbus
00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400
Series Chipset Thermal Subsystem [8086:3b32] (rev 06)
Subsystem: Lenovo Device [17aa:2190]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 0: Memory at f2626000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel ips
03:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8191SEvB
Wireless LAN Controller [10ec:8172] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:e020]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at f2400000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: rtl8192se
0d:00.0 SD Host controller [0805]: Ricoh Co Ltd MMC/SD Host Controller
[1180:e822] (rev 01)
Subsystem: Lenovo Device [17aa:2133]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f2500000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
0d:00.1 System peripheral [0880]: Ricoh Co Ltd R5U2xx (R5U230 / R5U231 /
R5U241) [Memory Stick Host Controller] [1180:e230] (rev 01)
Subsystem: Lenovo Device [17aa:2134]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at f2500400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
0d:00.3 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 PCIe IEEE 1394
Controller [1180:e832] (rev 01) (prog-if 10 [OHCI])
Subsystem: Lenovo Device [17aa:2136]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at f2500800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath
Architecture Generic Non-core Registers [8086:2c62] (rev 02)
Subsystem: Lenovo Device [17aa:2196]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath
Architecture System Address Decoder [8086:2d01] (rev 02)
Subsystem: Lenovo Device [17aa:2196]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0
[8086:2d10] (rev 02)
Subsystem: Lenovo Device [17aa:2196]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0
[8086:2d11] (rev 02)
Subsystem: Lenovo Device [17aa:2196]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved
[8086:2d12] (rev 02)
Subsystem: Lenovo Device [17aa:2196]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved
[8086:2d13] (rev 02)
Subsystem: Lenovo Device [17aa:2196]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
** USB devices:
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0a5c:217f Broadcom Corp. Bluetooth Controller
Bus 001 Device 004: ID 17ef:480f Lenovo Integrated Webcam [R5U877]
Bus 002 Device 004: ID 18d1:4ee3 Google Inc.
-- System Information:
Debian Release: 7.5
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.13-0.bpo.1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.13-0.bpo.1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.115~bpo70+1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.13-0.bpo.1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.13-0.bpo.1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.13 <none>
Versions of packages linux-image-3.13-0.bpo.1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.36+wheezy.1
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.13-0.bpo.1-amd64/prerm/removing-running-kernel-3.13-0.bpo.1-amd64:
true
linux-image-3.13-0.bpo.1-amd64/postinst/depmod-error-initrd-3.13-0.bpo.1-amd64:
false
--- End Message ---
