Bug#736195: marked as done (network/USB not working on Gigabyte 990FXA-UD3)

[Debian Bug Tracking System]

Your message dated Sat, 24 Apr 2021 12:16:25 -0700 (PDT)
with message-id <60846e89.1c69fb81.d8432.d...@mx.google.com>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #736195,
regarding network/USB not working on Gigabyte 990FXA-UD3
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)


-- 
736195: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=736195
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems

--- Begin Message ---

Package: installation-reports
Wheezy_amd64:    Linux debian 3.2.0-4-amd64


Boot method: <How did you boot the installer? CD? floppy? network?>   
network-CD  I tried all versions inclusive jessie_amd64
Image version: <Full URL to image you downloaded is best> no matter: all 
versions with 3.x.x kernels
Date: <Date and time of the install> 30.05.2013

Machine: <Description of machine (eg, IBM Thinkpad R32)> Mainboard GIGABYTE 990 
XA-UD3
Processor: AMD64 FX(tmp)-6300 Six-Core Prozessor, BIOS: GIGABYTE UEFI Dual 
BIOS, Version FB
Memory: RAM 8 Gbyte
Partitions: <df -Tl will do; the raw partition table is preferred>

Output of lspci -knn (or lspci -nn):
for output dmesg, lsmod, lspci, lsusb:http://nopaste.debianforum.de/37181
or look appendix 37181.txt

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [E]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [0]  no USB 2.0 Devixces
Partition hard drives:  [O]
Install base system:    [E]
Clock/timezone setup:   [O]
User/password setup:    [0]
Install tasks:          [E] none Network
Install boot loader:    [E]
Overall install:        [E]

Comments/Problems:

Hello very revered Installer team,

    I've failed when installing Debian Wheezy_amd64 and I have long been
    trying to find himself a solution. In Debian forum I have described
    as "Rainer50" my problem, download the installer can not install a network 
and all USB 2.0
    devices are not working!

    All 3.xxx kernel of different distributions could not be installed,
    no "live-system" too.

    The version of Squeeze_amd64 and Wheezy_amd32 I was able to install the 
other hand

    By chance I discovered the solution:
    In the bios I had to "IOMMU" to enabled set!

    For questions I am happy to Have.

My first Debian was "Potato" and I appreciate your work very much.

    Unfortunately, I can barely English, so I use an automatic
    translation.

All Details about the failed installation are in the last link (http://nopaste...) Links:

    
http://debianforum.de/forum/viewtopic.php?f=12&t=143379&hilit=amd64+Wheezy#p940849

    http://debianforum.de/forum/viewtopic.php?f=12&t=142731

    Output: dmesg, lsmod, lspci, lsusb für kernel 3.2.0-4-amd64:

    http://nopaste.debianforum.de/37181

    Sincerely yours

    Rainer


dmesg:
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) 
(gcc version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.41-2
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 
root=UUID=5ab4dd43-dbba-402a-8f28-cf2795424ae7 ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000beb80000 (usable)
[    0.000000]  BIOS-e820: 00000000beb80000 - 00000000bf13e000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf13e000 - 00000000bf537000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bf537000 - 00000000bf857000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf857000 - 00000000bf858000 (usable)
[    0.000000]  BIOS-e820: 00000000bf858000 - 00000000bfa5e000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bfa5e000 - 00000000bff00000 (usable)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec20000 - 00000000fec21000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100001000 - 000000023f000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by 
O.E.M./990XA-UD3, BIOS FB 12/07/2012
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) 
==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x23f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-CDFFF write-protect
[    0.000000]   CE000-EBFFF uncachable
[    0.000000]   EC000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000BFF00000 mask FFFFFFF00000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000023f000000 aka 9200M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) 
==> (reserved)
[    0.000000] last_pfn = 0xbff00 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000fd850] fd850
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: 0000000000000000-00000000bff00000
[    0.000000]  0000000000 - 0080000000 page 1G
[    0.000000]  0080000000 - 00bfe00000 page 2M
[    0.000000]  00bfe00000 - 00bff00000 page 4k
[    0.000000] kernel direct mapping tables up to bff00000 @ 1fffd000-20000000
[    0.000000] init_memory_mapping: 0000000100001000-000000023f000000
[    0.000000]  0100001000 - 0100200000 page 4k
[    0.000000]  0100200000 - 0140000000 page 2M
[    0.000000]  0140000000 - 0200000000 page 1G
[    0.000000]  0200000000 - 023f000000 page 2M
[    0.000000] kernel direct mapping tables up to 23f000000 @ bfefc000-bff00000
[    0.000000] RAMDISK: 36c74000 - 37632000
[    0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 00000000bf51a070 00064 (v01 ALASKA    A M I 01072009 
AMI  00010013)
[    0.000000] ACPI: FACP 00000000bf520810 000F4 (v04 ALASKA    A M I 01072009 
AMI  00010013)
[    0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or 
length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
[    0.000000] ACPI: DSDT 00000000bf51a170 0669D (v02 ALASKA    A M I 00000000 
INTL 20051117)
[    0.000000] ACPI: FACS 00000000bf531f80 00040
[    0.000000] ACPI: APIC 00000000bf520908 0008E (v03 ALASKA    A M I 01072009 
AMI  00010013)
[    0.000000] ACPI: FPDT 00000000bf520998 00044 (v01 ALASKA    A M I 01072009 
AMI  00010013)
[    0.000000] ACPI: MCFG 00000000bf5209e0 0003C (v01 ALASKA    A M I 01072009 
MSFT 00010013)
[    0.000000] ACPI: HPET 00000000bf520a20 00038 (v01 ALASKA    A M I 01072009 
AMI  00000005)
[    0.000000] ACPI: SSDT 00000000bf520a58 01158 (v01 AMD    POWERNOW 00000001 
AMD  00000001)
[    0.000000] ACPI: MATS 00000000bf521bb0 00034 (v02 ALASKA    A M I 00000002 
w?x2 00000000)
[    0.000000] ACPI: BGRT 00000000bf521be8 00038 (v00 ALASKA    A M I 01072009 
AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000023f000000
[    0.000000] Initmem setup node 0 0000000000000000-000000023f000000
[    0.000000]   NODE_DATA [000000023effb000 - 000000023effffff]
[    0.000000]  [ffffea0000000000-ffffea0007dfffff] PMD -> 
[ffff880236600000-ffff88023d5fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0023f000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x000beb80
[    0.000000]     0: 0x000bf857 -> 0x000bf858
[    0.000000]     0: 0x000bfa5e -> 0x000bff00
[    0.000000]     0: 0x00100001 -> 0x0023f000
[    0.000000] On node 0 totalpages: 2088880
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3921 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 763995 pages, LIFO batch:31
[    0.000000]   Normal zone: 17864 pages used for memmap
[    0.000000]   Normal zone: 1288759 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 7, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec20000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 8, version 33, address 0xfec20000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.000000] SMP: Allowing 6 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 72
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000beb80000 - 00000000bf13e000
[    0.000000] PM: Registered nosave memory: 00000000bf13e000 - 00000000bf537000
[    0.000000] PM: Registered nosave memory: 00000000bf537000 - 00000000bf857000
[    0.000000] PM: Registered nosave memory: 00000000bf858000 - 00000000bfa5e000
[    0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[    0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000
[    0.000000] PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000
[    0.000000] PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000
[    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
[    0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
[    0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
[    0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
[    0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
[    0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
[    0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
[    0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
[    0.000000] Allocating PCI resources starting at bff00000 (gap: 
bff00000:38100000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 
nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023ec00000 s82944 r8192 
d23552 u262144
[    0.000000] pcpu-alloc: s82944 r8192 d23552 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total 
pages: 2056675
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 
root=UUID=5ab4dd43-dbba-402a-8f28-cf2795424ae7 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ f8000000 size 64 MB
[    0.000000] Memory: 8155596k/9420800k available (3420k kernel code, 1065280k 
absent, 199924k reserved, 3318k data, 576k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:1272 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 3516.048 MHz processor.
[    0.004003] Calibrating delay loop (skipped), value calculated using timer 
frequency.. 7032.09 BogoMIPS (lpj=14064192)
[    0.004006] pid_max: default: 32768 minimum: 301
[    0.004035] Security Framework initialized
[    0.004038] AppArmor: AppArmor disabled by boot time parameter
[    0.004483] Dentry cache hash table entries: 1048576 (order: 11, 8388608 
bytes)
[    0.006408] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.007245] Mount-cache hash table entries: 256
[    0.007326] Initializing cgroup subsys cpuacct
[    0.007329] Initializing cgroup subsys memory
[    0.007338] Initializing cgroup subsys devices
[    0.007341] Initializing cgroup subsys freezer
[    0.007342] Initializing cgroup subsys net_cls
[    0.007344] Initializing cgroup subsys blkio
[    0.007348] Initializing cgroup subsys perf_event
[    0.007369] tseg: 00bff00000
[    0.007370] CPU: Physical Processor ID: 0
[    0.007371] CPU: Processor Core ID: 0
[    0.007372] mce: CPU supports 7 MCE banks
[    0.007631] ACPI: Core revision 20110623
[    0.012375] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.055214] CPU0: AMD FX(tm)-6300 Six-Core Processor              stepping 00
[    0.056003] Performance Events: AMD Family 15h PMU driver.
[    0.056003] ... version:                0
[    0.056003] ... bit width:              48
[    0.056003] ... generic registers:      6
[    0.056003] ... value mask:             0000ffffffffffff
[    0.056003] ... max period:             00007fffffffffff
[    0.056003] ... fixed-purpose events:   0
[    0.056003] ... event mask:             000000000000003f
[    0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.056003] Booting Node   0, Processors  #1
[    0.056003] smpboot cpu 1: start_ip = 99000
[    0.144029] NMI watchdog enabled, takes one hw-pmu counter.
[    0.144125]  #2
[    0.144127] smpboot cpu 2: start_ip = 99000
[    0.236026] NMI watchdog enabled, takes one hw-pmu counter.
[    0.236096]  #3
[    0.236097] smpboot cpu 3: start_ip = 99000
[    0.328030] NMI watchdog enabled, takes one hw-pmu counter.
[    0.328094]  #4
[    0.328095] smpboot cpu 4: start_ip = 99000
[    0.420036] NMI watchdog enabled, takes one hw-pmu counter.
[    0.420108]  #5 Ok.
[    0.420109] smpboot cpu 5: start_ip = 99000
[    0.512041] NMI watchdog enabled, takes one hw-pmu counter.
[    0.512054] Brought up 6 CPUs
[    0.512056] Total of 6 processors activated (42191.62 BogoMIPS).
[    0.516175] devtmpfs: initialized
[    0.521733] PM: Registering ACPI NVS region at bf13e000 (4165632 bytes)
[    0.521733] PM: Registering ACPI NVS region at bf858000 (2121728 bytes)
[    0.521733] print_constraints: dummy: 
[    0.521733] NET: Registered protocol family 16
[    0.521733] Extended Config Space enabled on 1 nodes
[    0.521733] ACPI: bus type pci registered
[    0.521733] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 
0xe0000000-0xefffffff] (base 0xe0000000)
[    0.521733] PCI: not using MMCONFIG
[    0.521733] PCI: Using configuration type 1 for base access
[    0.521733] PCI: Using configuration type 1 for extended access
[    0.521733] bio: create slab <bio-0> at 0
[    0.521733] ACPI: Added _OSI(Module Device)
[    0.521733] ACPI: Added _OSI(Processor Device)
[    0.521733] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.521733] ACPI: Added _OSI(Processor Aggregator Device)
[    0.521733] ACPI: EC: Look up EC in DSDT
[    0.524439] ACPI: Executed 3 blocks of module-level executable AML code
[    0.536451] ACPI: Interpreter enabled
[    0.536456] ACPI: (supports S0 S3 S4 S5)
[    0.536470] ACPI: Using IOAPIC for interrupt routing
[    0.536585] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 
0xe0000000-0xefffffff] (base 0xe0000000)
[    0.536618] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI 
motherboard resources
[    0.574166] ACPI: No dock devices found.
[    0.574168] HEST: Table not found.
[    0.574171] PCI: Using host bridge windows from ACPI; if necessary, use 
"pci=nocrs" and report a bug
[    0.574312] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.574532] pci_root PNP0A08:00: host bridge window [io  0x0000-0x03af]
[    0.574534] pci_root PNP0A08:00: host bridge window [io  0x03e0-0x0cf7]
[    0.574536] pci_root PNP0A08:00: host bridge window [io  0x03b0-0x03df]
[    0.574538] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.574539] pci_root PNP0A08:00: host bridge window [mem 
0x000a0000-0x000bffff]
[    0.574541] pci_root PNP0A08:00: host bridge window [mem 
0x000c0000-0x000dffff]
[    0.574543] pci_root PNP0A08:00: host bridge window [mem 
0xc0000000-0xffffffff]
[    0.574557] pci 0000:00:00.0: [1002:5a14] type 0 class 0x000600
[    0.574614] pci 0000:00:02.0: [1002:5a16] type 1 class 0x000604
[    0.574645] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.574661] pci 0000:00:04.0: [1002:5a18] type 1 class 0x000604
[    0.574690] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.574707] pci 0000:00:09.0: [1002:5a1c] type 1 class 0x000604
[    0.574736] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    0.574749] pci 0000:00:0a.0: [1002:5a1d] type 1 class 0x000604
[    0.574778] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.574800] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[    0.574815] pci 0000:00:11.0: reg 10: [io  0xf090-0xf097]
[    0.574822] pci 0000:00:11.0: reg 14: [io  0xf080-0xf083]
[    0.574829] pci 0000:00:11.0: reg 18: [io  0xf070-0xf077]
[    0.574837] pci 0000:00:11.0: reg 1c: [io  0xf060-0xf063]
[    0.574844] pci 0000:00:11.0: reg 20: [io  0xf050-0xf05f]
[    0.574851] pci 0000:00:11.0: reg 24: [mem 0xfe40b000-0xfe40b3ff]
[    0.574896] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[    0.574906] pci 0000:00:12.0: reg 10: [mem 0xfe40a000-0xfe40afff]
[    0.574959] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[    0.574975] pci 0000:00:12.2: reg 10: [mem 0xfe409000-0xfe4090ff]
[    0.575036] pci 0000:00:12.2: supports D1 D2
[    0.575038] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.575056] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[    0.575066] pci 0000:00:13.0: reg 10: [mem 0xfe408000-0xfe408fff]
[    0.575125] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[    0.575138] pci 0000:00:13.2: reg 10: [mem 0xfe407000-0xfe4070ff]
[    0.575198] pci 0000:00:13.2: supports D1 D2
[    0.575199] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.575218] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[    0.575271] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[    0.575281] pci 0000:00:14.1: reg 10: [io  0xf040-0xf047]
[    0.575288] pci 0000:00:14.1: reg 14: [io  0xf030-0xf033]
[    0.575295] pci 0000:00:14.1: reg 18: [io  0xf020-0xf027]
[    0.575302] pci 0000:00:14.1: reg 1c: [io  0xf010-0xf013]
[    0.575309] pci 0000:00:14.1: reg 20: [io  0xf000-0xf00f]
[    0.575337] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[    0.575353] pci 0000:00:14.2: reg 10: [mem 0xfe400000-0xfe403fff 64bit]
[    0.575400] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.575412] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[    0.575468] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[    0.575499] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[    0.575509] pci 0000:00:14.5: reg 10: [mem 0xfe406000-0xfe406fff]
[    0.575559] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[    0.575569] pci 0000:00:16.0: reg 10: [mem 0xfe405000-0xfe405fff]
[    0.575621] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[    0.575634] pci 0000:00:16.2: reg 10: [mem 0xfe404000-0xfe4040ff]
[    0.575694] pci 0000:00:16.2: supports D1 D2
[    0.575695] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.575712] pci 0000:00:18.0: [1022:1600] type 0 class 0x000600
[    0.575729] pci 0000:00:18.1: [1022:1601] type 0 class 0x000600
[    0.575742] pci 0000:00:18.2: [1022:1602] type 0 class 0x000600
[    0.575755] pci 0000:00:18.3: [1022:1603] type 0 class 0x000600
[    0.575772] pci 0000:00:18.4: [1022:1604] type 0 class 0x000600
[    0.575784] pci 0000:00:18.5: [1022:1605] type 0 class 0x000600
[    0.575830] pci 0000:01:00.0: [10de:0f00] type 0 class 0x000300
[    0.575838] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[    0.575847] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.575855] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.575861] pci 0000:01:00.0: reg 24: [io  0xe000-0xe07f]
[    0.575867] pci 0000:01:00.0: reg 30: [mem 0xfe000000-0xfe07ffff pref]
[    0.575915] pci 0000:01:00.1: [10de:0bea] type 0 class 0x000403
[    0.575923] pci 0000:01:00.1: reg 10: [mem 0xfe080000-0xfe083fff]
[    0.580052] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[    0.580055] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.580058] pci 0000:00:02.0:   bridge window [mem 0xfd000000-0xfe0fffff]
[    0.580061] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xd1ffffff 
64bit pref]
[    0.580095] pci 0000:02:00.0: [1b6f:7023] type 0 class 0x000c03
[    0.580109] pci 0000:02:00.0: reg 10: [mem 0xfe300000-0xfe307fff 64bit]
[    0.580173] pci 0000:02:00.0: supports D1 D2
[    0.580174] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.588047] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[    0.588051] pci 0000:00:04.0:   bridge window [mem 0xfe300000-0xfe3fffff]
[    0.588088] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[    0.588100] pci 0000:03:00.0: reg 10: [io  0xd000-0xd0ff]
[    0.588118] pci 0000:03:00.0: reg 18: [mem 0xd8004000-0xd8004fff 64bit pref]
[    0.588130] pci 0000:03:00.0: reg 20: [mem 0xd8000000-0xd8003fff 64bit pref]
[    0.588180] pci 0000:03:00.0: supports D1 D2
[    0.588181] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.596047] pci 0000:00:09.0: PCI bridge to [bus 03-03]
[    0.596051] pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
[    0.596054] pci 0000:00:09.0:   bridge window [mem 0xd8000000-0xd80fffff 
64bit pref]
[    0.596089] pci 0000:04:00.0: [1b6f:7023] type 0 class 0x000c03
[    0.596103] pci 0000:04:00.0: reg 10: [mem 0xfe200000-0xfe207fff 64bit]
[    0.596167] pci 0000:04:00.0: supports D1 D2
[    0.596168] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.604047] pci 0000:00:0a.0: PCI bridge to [bus 04-04]
[    0.604051] pci 0000:00:0a.0:   bridge window [mem 0xfe200000-0xfe2fffff]
[    0.604085] pci 0000:05:06.0: [4444:0803] type 0 class 0x000400
[    0.604103] pci 0000:05:06.0: reg 10: [mem 0xd4000000-0xd7ffffff pref]
[    0.604208] pci 0000:05:0e.0: [1106:3044] type 0 class 0x000c00
[    0.604226] pci 0000:05:0e.0: reg 10: [mem 0xfe100000-0xfe1007ff]
[    0.604236] pci 0000:05:0e.0: reg 14: [io  0xc000-0xc07f]
[    0.604310] pci 0000:05:0e.0: supports D2
[    0.604311] pci 0000:05:0e.0: PME# supported from D2 D3hot D3cold
[    0.604340] pci 0000:00:14.4: PCI bridge to [bus 05-05] (subtractive decode)
[    0.604343] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
[    0.604346] pci 0000:00:14.4:   bridge window [mem 0xfe100000-0xfe1fffff]
[    0.604349] pci 0000:00:14.4:   bridge window [mem 0xd4000000-0xd7ffffff 
pref]
[    0.604351] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af] 
(subtractive decode)
[    0.604353] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7] 
(subtractive decode)
[    0.604355] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df] 
(subtractive decode)
[    0.604357] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] 
(subtractive decode)
[    0.604358] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] 
(subtractive decode)
[    0.604360] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] 
(subtractive decode)
[    0.604362] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xffffffff] 
(subtractive decode)
[    0.604375] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.604483] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[    0.604555] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
[    0.604580] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04._PRT]
[    0.604607] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC09._PRT]
[    0.604633] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0A._PRT]
[    0.604662]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.604665]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned 
control mask: 0x1d
[    0.604666] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.610078] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[    0.610125] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[    0.610174] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[    0.610222] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[    0.610260] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[    0.610289] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[    0.610317] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[    0.610346] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[    0.610407] vgaarb: device added: 
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.610407] vgaarb: loaded
[    0.610407] vgaarb: bridge control possible 0000:01:00.0
[    0.610407] PCI: Using ACPI for IRQ routing
[    0.616587] PCI: pci_cache_line_size set to 64 bytes
[    0.616660] reserve RAM buffer: 000000000009e800 - 000000000009ffff 
[    0.616662] reserve RAM buffer: 00000000beb80000 - 00000000bfffffff 
[    0.616664] reserve RAM buffer: 00000000bf858000 - 00000000bfffffff 
[    0.616665] reserve RAM buffer: 00000000bff00000 - 00000000bfffffff 
[    0.616667] reserve RAM buffer: 000000023f000000 - 000000023fffffff 
[    0.616743] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.616746] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.618781] Switching to clocksource hpet
[    0.618790] pnp: PnP ACPI init
[    0.618790] ACPI: bus type pnp registered
[    0.618790] pnp 00:00: [bus 00-ff]
[    0.618790] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.618790] pnp 00:00: [io  0x0000-0x03af window]
[    0.618790] pnp 00:00: [io  0x03e0-0x0cf7 window]
[    0.618790] pnp 00:00: [io  0x03b0-0x03df window]
[    0.618790] pnp 00:00: [io  0x0d00-0xffff window]
[    0.618790] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.618790] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.618790] pnp 00:00: [mem 0xc0000000-0xffffffff window]
[    0.618790] pnp 00:00: [mem 0x00000000 window]
[    0.618790] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 
(active)
[    0.618790] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.618790] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.618790] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.618790] pnp 00:02: [io  0x040b]
[    0.618790] pnp 00:02: [io  0x04d6]
[    0.618790] pnp 00:02: [io  0x0c00-0x0c01]
[    0.618790] pnp 00:02: [io  0x0c14]
[    0.618790] pnp 00:02: [io  0x0c50-0x0c51]
[    0.618790] pnp 00:02: [io  0x0c52]
[    0.618790] pnp 00:02: [io  0x0c6c]
[    0.618790] pnp 00:02: [io  0x0c6f]
[    0.618790] pnp 00:02: [io  0x0cd0-0x0cd1]
[    0.618790] pnp 00:02: [io  0x0cd2-0x0cd3]
[    0.618790] pnp 00:02: [io  0x0cd4-0x0cd5]
[    0.618790] pnp 00:02: [io  0x0cd6-0x0cd7]
[    0.618790] pnp 00:02: [io  0x0cd8-0x0cdf]
[    0.618790] pnp 00:02: [io  0x0800-0x089f]
[    0.618790] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
[    0.618790] pnp 00:02: [io  0x0000-0x000f]
[    0.618790] pnp 00:02: [io  0x0b20-0x0b3f]
[    0.618790] pnp 00:02: [io  0x0900-0x090f]
[    0.618790] pnp 00:02: [io  0x0910-0x091f]
[    0.618790] pnp 00:02: [io  0xfe00-0xfefe]
[    0.618790] pnp 00:02: [io  0x0060-0x005f disabled]
[    0.618790] pnp 00:02: [io  0x0064-0x0063 disabled]
[    0.618790] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[    0.618790] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[    0.618790] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
[    0.618790] pnp 00:02: [mem 0xfed61000-0xfed70fff]
[    0.618790] pnp 00:02: [mem 0xfec10000-0xfec10fff]
[    0.618790] pnp 00:02: [mem 0xfed00000-0xfed00fff]
[    0.618790] pnp 00:02: [mem 0xffc00000-0xffffffff]
[    0.618790] system 00:02: [io  0x040b] has been reserved
[    0.618790] system 00:02: [io  0x04d6] has been reserved
[    0.618790] system 00:02: [io  0x0c00-0x0c01] has been reserved
[    0.618790] system 00:02: [io  0x0c14] has been reserved
[    0.618790] system 00:02: [io  0x0c50-0x0c51] has been reserved
[    0.618790] system 00:02: [io  0x0c52] has been reserved
[    0.618790] system 00:02: [io  0x0c6c] has been reserved
[    0.618790] system 00:02: [io  0x0c6f] has been reserved
[    0.618790] system 00:02: [io  0x0cd0-0x0cd1] has been reserved
[    0.618790] system 00:02: [io  0x0cd2-0x0cd3] has been reserved
[    0.618790] system 00:02: [io  0x0cd4-0x0cd5] has been reserved
[    0.618790] system 00:02: [io  0x0cd6-0x0cd7] has been reserved
[    0.618790] system 00:02: [io  0x0cd8-0x0cdf] has been reserved
[    0.618790] system 00:02: [io  0x0800-0x089f] has been reserved
[    0.618790] system 00:02: [io  0x0b20-0x0b3f] has been reserved
[    0.618790] system 00:02: [io  0x0900-0x090f] has been reserved
[    0.618790] system 00:02: [io  0x0910-0x091f] has been reserved
[    0.618790] system 00:02: [io  0xfe00-0xfefe] has been reserved
[    0.618790] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.618790] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.618790] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.618790] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.618790] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.618790] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[    0.618790] system 00:02: [mem 0xffc00000-0xffffffff] has been reserved
[    0.618790] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.618790] pnp 00:03: [io  0x0000-0xffffffffffffffff disabled]
[    0.618790] pnp 00:03: [io  0x0220-0x0227]
[    0.618790] pnp 00:03: [io  0x0228-0x0237]
[    0.618790] pnp 00:03: [io  0x0a20-0x0a2f]
[    0.618790] system 00:03: [io  0x0220-0x0227] has been reserved
[    0.618790] system 00:03: [io  0x0228-0x0237] has been reserved
[    0.618790] system 00:03: [io  0x0a20-0x0a2f] has been reserved
[    0.618790] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.618790] pnp 00:04: [io  0x03f8-0x03ff]
[    0.618790] pnp 00:04: [irq 4]
[    0.618790] pnp 00:04: [dma 0 disabled]
[    0.618790] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.618790] pnp 00:05: [dma 4]
[    0.618790] pnp 00:05: [io  0x0000-0x000f]
[    0.618790] pnp 00:05: [io  0x0081-0x0083]
[    0.618790] pnp 00:05: [io  0x0087]
[    0.618790] pnp 00:05: [io  0x0089-0x008b]
[    0.618790] pnp 00:05: [io  0x008f]
[    0.618790] pnp 00:05: [io  0x00c0-0x00df]
[    0.618790] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.618790] pnp 00:06: [io  0x0070-0x0071]
[    0.618790] pnp 00:06: [irq 8]
[    0.618790] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.618790] pnp 00:07: [io  0x0061]
[    0.618790] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.618790] pnp 00:08: [io  0x0010-0x001f]
[    0.618790] pnp 00:08: [io  0x0022-0x003f]
[    0.618790] pnp 00:08: [io  0x0044-0x005f]
[    0.618790] pnp 00:08: [io  0x0062-0x0063]
[    0.618790] pnp 00:08: [io  0x0065-0x006f]
[    0.618790] pnp 00:08: [io  0x0072-0x007f]
[    0.618790] pnp 00:08: [io  0x0080]
[    0.618790] pnp 00:08: [io  0x0084-0x0086]
[    0.618790] pnp 00:08: [io  0x0088]
[    0.618790] pnp 00:08: [io  0x008c-0x008e]
[    0.618790] pnp 00:08: [io  0x0090-0x009f]
[    0.618790] pnp 00:08: [io  0x00a2-0x00bf]
[    0.618790] pnp 00:08: [io  0x00e0-0x00ef]
[    0.618790] pnp 00:08: [io  0x04d0-0x04d1]
[    0.618790] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.618790] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.618790] pnp 00:09: [io  0x00f0-0x00ff]
[    0.618790] pnp 00:09: [irq 13]
[    0.618790] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.618790] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.618790] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.618790] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.618790] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.618790] pnp 00:0c: [mem 0xfec20000-0xfec200ff]
[    0.618791] system 00:0c: [mem 0xfec20000-0xfec200ff] could not be reserved
[    0.618793] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.618886] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
[    0.618913] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.618915] pnp: PnP ACPI: found 14 devices
[    0.618916] ACPI: ACPI bus type pnp unregistered
[    0.625368] PCI: max bus depth: 1 pci_try_num: 2
[    0.625385] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[    0.625388] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.625390] pci 0000:00:02.0:   bridge window [mem 0xfd000000-0xfe0fffff]
[    0.625393] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xd1ffffff 
64bit pref]
[    0.625396] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[    0.625398] pci 0000:00:04.0:   bridge window [mem 0xfe300000-0xfe3fffff]
[    0.625402] pci 0000:00:09.0: PCI bridge to [bus 03-03]
[    0.625404] pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
[    0.625407] pci 0000:00:09.0:   bridge window [mem 0xd8000000-0xd80fffff 
64bit pref]
[    0.625410] pci 0000:00:0a.0: PCI bridge to [bus 04-04]
[    0.625412] pci 0000:00:0a.0:   bridge window [mem 0xfe200000-0xfe2fffff]
[    0.625416] pci 0000:00:14.4: PCI bridge to [bus 05-05]
[    0.625418] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
[    0.625422] pci 0000:00:14.4:   bridge window [mem 0xfe100000-0xfe1fffff]
[    0.625425] pci 0000:00:14.4:   bridge window [mem 0xd4000000-0xd7ffffff 
pref]
[    0.625437] pci 0000:00:02.0: setting latency timer to 64
[    0.625441] pci 0000:00:04.0: setting latency timer to 64
[    0.625447] pci 0000:00:09.0: setting latency timer to 64
[    0.625452] pci 0000:00:0a.0: setting latency timer to 64
[    0.625458] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
[    0.625459] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
[    0.625461] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
[    0.625463] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
[    0.625464] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[    0.625466] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[    0.625467] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[    0.625469] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.625471] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
[    0.625472] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit 
pref]
[    0.625474] pci_bus 0000:02: resource 1 [mem 0xfe300000-0xfe3fffff]
[    0.625475] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.625477] pci_bus 0000:03: resource 2 [mem 0xd8000000-0xd80fffff 64bit 
pref]
[    0.625479] pci_bus 0000:04: resource 1 [mem 0xfe200000-0xfe2fffff]
[    0.625480] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    0.625482] pci_bus 0000:05: resource 1 [mem 0xfe100000-0xfe1fffff]
[    0.625483] pci_bus 0000:05: resource 2 [mem 0xd4000000-0xd7ffffff pref]
[    0.625485] pci_bus 0000:05: resource 4 [io  0x0000-0x03af]
[    0.625486] pci_bus 0000:05: resource 5 [io  0x03e0-0x0cf7]
[    0.625487] pci_bus 0000:05: resource 6 [io  0x03b0-0x03df]
[    0.625489] pci_bus 0000:05: resource 7 [io  0x0d00-0xffff]
[    0.625490] pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff]
[    0.625492] pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff]
[    0.625493] pci_bus 0000:05: resource 10 [mem 0xc0000000-0xffffffff]
[    0.625594] NET: Registered protocol family 2
[    0.625767] IP route cache hash table entries: 262144 (order: 9, 2097152 
bytes)
[    0.626680] TCP established hash table entries: 524288 (order: 11, 8388608 
bytes)
[    0.628214] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.628405] TCP: Hash tables configured (established 524288 bind 65536)
[    0.628406] TCP reno registered
[    0.628416] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.628450] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.628578] NET: Registered protocol family 1
[    0.956106] pci 0000:01:00.0: Boot video device
[    0.956187] PCI: CLS 64 bytes, default 64
[    0.956224] Unpacking initramfs...
[    1.116403] Freeing initrd memory: 9976k freed
[    1.118591] PCI-DMA: Disabling AGP.
[    1.118660] PCI-DMA: aperture base @ f8000000 size 65536 KB
[    1.118661] init_memory_mapping: 00000000f8000000-00000000fc000000
[    1.118664]  00f8000000 - 00fc000000 page 2M
[    1.118668] PCI-DMA: using GART IOMMU.
[    1.118670] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.122828] perf: AMD IBS detected (0x000000ff)
[    1.122991] audit: initializing netlink socket (disabled)
[    1.123003] type=2000 audit(1369866823.116:1): initialized
[    1.132950] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.133924] VFS: Disk quotas dquot_6.5.2
[    1.133953] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.134007] msgmni has been set to 16077
[    1.134175] alg: No test for stdrng (krng)
[    1.134207] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 
253)
[    1.134209] io scheduler noop registered
[    1.134210] io scheduler deadline registered
[    1.134239] io scheduler cfq registered (default)
[    1.134394] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.134407] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.134409] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.134656] ERST: Table is not found!
[    1.134658] GHES: HEST is not enabled!
[    1.134704] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.155038] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.352516] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.376245] Linux agpgart interface v0.103
[    1.376336] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.376691] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.376697] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.376793] mousedev: PS/2 mouse device common for all mice
[    1.376832] rtc_cmos 00:06: RTC can wake from S4
[    1.376909] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.376929] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.376938] cpuidle: using governor ladder
[    1.376939] cpuidle: using governor menu
[    1.377087] TCP cubic registered
[    1.377173] NET: Registered protocol family 10
[    1.377525] Mobile IPv6
[    1.377526] NET: Registered protocol family 17
[    1.377529] Registering the dns_resolver key type
[    1.377626] PM: Hibernation image not present or could not be loaded.
[    1.377632] registered taskstats version 1
[    1.378240] rtc_cmos 00:06: setting system clock to 2013-05-29 22:33:44 UTC 
(1369866824)
[    1.378284] Initializing network drop monitor service
[    1.379138] Freeing unused kernel memory: 576k freed
[    1.379239] Write protecting the kernel read-only data: 6144k
[    1.381062] Freeing unused kernel memory: 660k freed
[    1.382976] Freeing unused kernel memory: 680k freed
[    1.391382] udevd[66]: starting version 175
[    1.401826] usbcore: registered new interface driver usbfs
[    1.401850] usbcore: registered new interface driver hub
[    1.405370] SCSI subsystem initialized
[    1.405533] usbcore: registered new device driver usb
[    1.406147] xhci_hcd 0000:02:00.0: setting latency timer to 64
[    1.406151] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.406178] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus 
number 1
[    1.406266] xhci_hcd 0000:02:00.0: irq 44, io mem 0xfe300000
[    1.406314] xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
[    1.406364] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.406367] usb usb1: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.406369] usb usb1: Product: xHCI Host Controller
[    1.406372] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[    1.406374] usb usb1: SerialNumber: 0000:02:00.0
[    1.407524] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.407554] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    1.408540] xHCI xhci_add_endpoint called for root hub
[    1.408542] xHCI xhci_check_bandwidth called for root hub
[    1.408573] hub 1-0:1.0: USB hub found
[    1.408580] hub 1-0:1.0: 2 ports detected
[    1.408649] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.408655] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus 
number 2
[    1.408672] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.408675] usb usb2: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.408677] usb usb2: Product: xHCI Host Controller
[    1.408678] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[    1.408680] usb usb2: SerialNumber: 0000:02:00.0
[    1.409535] xHCI xhci_add_endpoint called for root hub
[    1.409537] xHCI xhci_check_bandwidth called for root hub
[    1.409564] hub 2-0:1.0: USB hub found
[    1.409570] hub 2-0:1.0: 2 ports detected
[    1.409623] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus 
number 3
[    1.409630] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI 
dummy qh workaround
[    1.409651] QUIRK: Enable AMD PLL fix
[    1.409660] ehci_hcd 0000:00:12.2: debug port 1
[    1.409682] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe409000
[    1.409843] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.409897] r8169 0000:03:00.0: setting latency timer to 64
[    1.409954] r8169 0000:03:00.0: irq 73 for MSI/MSI-X
[    1.410410] r8169 0000:03:00.0: eth0: RTL8168evl/8111evl at 
0xffffc90000c6a000, 94:de:80:21:2a:5c, XID 0c900800 IRQ 73
[    1.410413] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx 
checksumming: ko]
[    1.413014] libata version 3.00 loaded.
[    1.420056] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.420087] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.420090] usb usb3: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.420092] usb usb3: Product: EHCI Host Controller
[    1.420094] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    1.420096] usb usb3: SerialNumber: 0000:00:12.2
[    1.420240] hub 3-0:1.0: USB hub found
[    1.420244] hub 3-0:1.0: 5 ports detected
[    1.420359] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    1.420367] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus 
number 4
[    1.420373] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI 
dummy qh workaround
[    1.420393] ehci_hcd 0000:00:13.2: debug port 1
[    1.420405] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe407000
[    1.424489] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.424509] xhci_hcd 0000:04:00.0: setting latency timer to 64
[    1.424512] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.424521] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus 
number 5
[    1.424603] xhci_hcd 0000:04:00.0: irq 47, io mem 0xfe200000
[    1.424653] xhci_hcd 0000:04:00.0: irq 74 for MSI/MSI-X
[    1.424693] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    1.424696] usb usb5: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.424698] usb usb5: Product: xHCI Host Controller
[    1.424699] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[    1.424701] usb usb5: SerialNumber: 0000:04:00.0
[    1.424853] xHCI xhci_add_endpoint called for root hub
[    1.424855] xHCI xhci_check_bandwidth called for root hub
[    1.424877] hub 5-0:1.0: USB hub found
[    1.424882] hub 5-0:1.0: 2 ports detected
[    1.425034] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.425039] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus 
number 6
[    1.425055] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    1.425057] usb usb6: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.425059] usb usb6: Product: xHCI Host Controller
[    1.425060] usb usb6: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[    1.425062] usb usb6: SerialNumber: 0000:04:00.0
[    1.425163] xHCI xhci_add_endpoint called for root hub
[    1.425165] xHCI xhci_check_bandwidth called for root hub
[    1.425203] hub 6-0:1.0: USB hub found
[    1.425208] hub 6-0:1.0: 2 ports detected
[    1.432053] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.432083] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    1.432086] usb usb4: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.432089] usb usb4: Product: EHCI Host Controller
[    1.432090] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    1.432092] usb usb4: SerialNumber: 0000:00:13.2
[    1.432176] hub 4-0:1.0: USB hub found
[    1.432179] hub 4-0:1.0: 5 ports detected
[    1.432271] ehci_hcd 0000:00:16.2: EHCI Host Controller
[    1.432278] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus 
number 7
[    1.432284] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI 
dummy qh workaround
[    1.432303] ehci_hcd 0000:00:16.2: debug port 1
[    1.432315] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe404000
[    1.444065] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    1.444089] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    1.444096] usb usb7: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.444102] usb usb7: Product: EHCI Host Controller
[    1.444104] usb usb7: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    1.444106] usb usb7: SerialNumber: 0000:00:16.2
[    1.444202] hub 7-0:1.0: USB hub found
[    1.444206] hub 7-0:1.0: 4 ports detected
[    1.444294] ahci 0000:00:11.0: version 3.0
[    1.444414] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf 
impl SATA mode
[    1.444418] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio 
slum part 
[    1.445319] scsi0 : ahci
[    1.446004] scsi1 : ahci
[    1.446095] scsi2 : ahci
[    1.446164] scsi3 : ahci
[    1.446369] ata1: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b100 
irq 19
[    1.446372] ata2: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b180 
irq 19
[    1.446375] ata3: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b200 
irq 19
[    1.446377] ata4: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b280 
irq 19
[    1.446647] scsi4 : pata_atiixp
[    1.446704] scsi5 : pata_atiixp
[    1.447176] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    1.447178] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    1.447222] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    1.447232] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus 
number 8
[    1.447254] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe40a000
[    1.476096] firewire_ohci: Added fw-ohci device 0000:05:0e.0, OHCI v1.10, 4 
IR + 8 IT contexts, quirks 0x11
[    1.504043] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.504045] usb usb8: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.504047] usb usb8: Product: OHCI Host Controller
[    1.504048] usb usb8: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[    1.504049] usb usb8: SerialNumber: 0000:00:12.0
[    1.504134] hub 8-0:1.0: USB hub found
[    1.504139] hub 8-0:1.0: 5 ports detected
[    1.504214] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.504221] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus 
number 9
[    1.504233] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe408000
[    1.564054] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[    1.564057] usb usb9: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.564059] usb usb9: Product: OHCI Host Controller
[    1.564060] usb usb9: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[    1.564061] usb usb9: SerialNumber: 0000:00:13.0
[    1.564145] hub 9-0:1.0: USB hub found
[    1.564149] hub 9-0:1.0: 5 ports detected
[    1.564212] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    1.564217] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus 
number 10
[    1.564230] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe406000
[    1.624036] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[    1.624038] usb usb10: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.624040] usb usb10: Product: OHCI Host Controller
[    1.624041] usb usb10: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[    1.624043] usb usb10: SerialNumber: 0000:00:14.5
[    1.624134] hub 10-0:1.0: USB hub found
[    1.624139] hub 10-0:1.0: 2 ports detected
[    1.624206] ohci_hcd 0000:00:16.0: OHCI Host Controller
[    1.624211] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus 
number 11
[    1.624225] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe405000
[    1.684042] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
[    1.684044] usb usb11: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.684046] usb usb11: Product: OHCI Host Controller
[    1.684047] usb usb11: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[    1.684048] usb usb11: SerialNumber: 0000:00:16.0
[    1.684133] hub 11-0:1.0: USB hub found
[    1.684138] hub 11-0:1.0: 4 ports detected
[    1.720056] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[    1.764095] ata4: SATA link down (SStatus 0 SControl 300)
[    1.764119] ata3: SATA link down (SStatus 0 SControl 300)
[    1.770892] usb 1-1: New USB device found, idVendor=046d, idProduct=c31c
[    1.770895] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.770897] usb 1-1: Product: USB Keyboard
[    1.770898] usb 1-1: Manufacturer: Logitech
[    1.770966] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc 
says 80 microframes
[    1.770969] usb 1-1: ep 0x82 - rounding interval to 1024 microframes, ep 
desc says 2040 microframes
[    1.820037] input: Logitech USB Keyboard as 
/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-1/1-1:1.0/input/input0
[    1.820084] generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 
Keyboard [Logitech USB Keyboard] on usb-0000:02:00.0-1/input0
[    1.855932] input: Logitech USB Keyboard as 
/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-1/1-1:1.1/input/input1
[    1.855980] generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 
Device [Logitech USB Keyboard] on usb-0000:02:00.0-1/input1
[    1.855992] usbcore: registered new interface driver usbhid
[    1.855994] usbhid: USB HID core driver
[    1.900047] usb 1-2: new low-speed USB device number 3 using xhci_hcd
[    1.936022] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.936042] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.936675] ata1.00: ATA-8: ST2000DM001-1CH164, CC24, max UDMA/133
[    1.936678] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), 
AA
[    1.937269] ata1.00: configured for UDMA/133
[    1.937388] scsi 0:0:0:0: Direct-Access     ATA      ST2000DM001-1CH1 CC24 
PQ: 0 ANSI: 5
[    1.939054] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100
[    1.942875] ata2.00: configured for UDMA/100
[    1.948858] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[    1.948860] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.948862] usb 1-2: Product: USB Optical Mouse
[    1.948863] usb 1-2: Manufacturer: Logitech
[    1.948930] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc 
says 80 microframes
[    1.951463] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS50  TN03 
PQ: 0 ANSI: 5
[    1.957478] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 
TB/1.81 TiB)
[    1.957480] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.957559] sd 0:0:0:0: [sda] Write Protect is off
[    1.957562] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.957594] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    1.961996] input: Logitech USB Optical Mouse as 
/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input2
[    1.962071] generic-usb 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 
Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[    1.966383] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda 
tray
[    1.966386] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.966489] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.976105] firewire_core: created device fw0: GUID 0049e55073f30a00, S400
[    1.994368]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[    1.994830] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.996294] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.996329] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.076063] usb 3-4: new high-speed USB device number 2 using ehci_hcd
[    2.120046] Refined TSC clocksource calibration: 3516.062 MHz.
[    2.120050] Switching to clocksource tsc
[    2.188012] usb 3-4: device descriptor read/64, error -32
[    2.404046] usb 3-4: device descriptor read/64, error -32
[    2.620048] usb 3-4: new high-speed USB device number 3 using ehci_hcd
[    2.732042] usb 3-4: device descriptor read/64, error -32
[    2.948046] usb 3-4: device descriptor read/64, error -32
[    3.164039] usb 3-4: new high-speed USB device number 4 using ehci_hcd
[    3.311853] PM: Starting manual resume from disk
[    3.311856] PM: Hibernation image partition 8:3 present
[    3.311857] PM: Looking for hibernation image.
[    3.312167] PM: Image not found (code -22)
[    3.312169] PM: Hibernation image not present or could not be loaded.
[    3.317623] EXT4-fs (sda8): INFO: recovery required on readonly filesystem
[    3.317625] EXT4-fs (sda8): write access will be enabled during recovery
[    3.366348] EXT4-fs (sda8): recovery complete
[    3.366706] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: 
(null)
[    3.572039] usb 3-4: device not accepting address 4, error -32
[    3.684043] usb 3-4: new high-speed USB device number 5 using ehci_hcd
[    4.092041] usb 3-4: device not accepting address 5, error -32
[    4.092101] hub 3-0:1.0: unable to enumerate USB device on port 4
[    4.216049] usb 5-2: new high-speed USB device number 2 using xhci_hcd
[    4.239046] usb 5-2: New USB device found, idVendor=14f7, idProduct=0500
[    4.239049] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.239050] usb 5-2: Product: TechniSat USB device
[    4.239052] usb 5-2: Manufacturer: TechniSat Digital
[    4.239053] usb 5-2: SerialNumber: 0008C9F0B0FC
[    4.406772] udevd[415]: starting version 175
[    4.494110] input: Power Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    4.494115] ACPI: Power Button [PWRB]
[    4.494152] input: Power Button as 
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    4.494154] ACPI: Power Button [PWRF]
[    4.589155] wmi: Mapper loaded
[    4.612047] usb 9-3: new full-speed USB device number 2 using ohci_hcd
[    4.622897] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    4.631596] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, 
revision 0
[    4.639591] ACPI: acpi_idle registered with cpuidle
[    4.657463] EDAC MC: Ver: 2.1.0
[    4.660956] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[    4.661195] SP5100 TCO timer: mmio address 0xbafe00 already in use
[    4.663688] MCE: In-kernel MCE decoding enabled.
[    4.664377] AMD64 EDAC driver v3.4.0
[    4.664397] EDAC amd64: DRAM ECC disabled.
[    4.664406] EDAC amd64: ECC disabled in the BIOS or no ECC capability, 
module will not load.
[    4.664407]  Either enable ECC checking or force module loading by setting 
'ecc_enable_override'.
[    4.664408]  (Note that use of the override may cause unknown side effects.)
[    4.711786] [drm] Initialized drm 1.1.0 20060810
[    4.733351] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    4.762789] powernow-k8: Found 1 AMD FX(tm)-6300 Six-Core Processor          
    (6 cpu cores) (version 2.20.00)
[    4.762799] powernow-k8: Core Performance Boosting: on.
[    4.762842] powernow-k8:    0 : pstate 0 (3500 MHz)
[    4.762844] powernow-k8:    1 : pstate 1 (3000 MHz)
[    4.762845] powernow-k8:    2 : pstate 2 (2500 MHz)
[    4.762846] powernow-k8:    3 : pstate 3 (2000 MHz)
[    4.762847] powernow-k8:    4 : pstate 4 (1400 MHz)
[    4.772728] Linux media interface: v0.10
[    4.950404] Error: Driver 'pcspkr' is already registered, aborting...
[    4.967863] Linux video capture interface: v2.00
[    5.090983] ivtv: Start initialization, version 1.4.3
[    5.091059] ivtv0: Initializing card 0
[    5.091064] ivtv0: Autodetected Hauppauge card (cx23415 based)
[    5.091195] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[    5.105426] MXM: GUID detected in BIOS
[    5.105893] nouveau 0000:01:00.0: setting latency timer to 64
[    5.105928] [drm] nouveau 0000:01:00.0: Detected an NVc0 generation card 
(0x0c1000a1)
[    5.112728] hda_codec: ALC889: BIOS auto-probing.
[    5.117494] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[    5.122817] input: HDA ATI SB Headphone as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input6
[    5.154114] tveeprom 1-0050: Hauppauge model 48134, rev J347, serial# 7110216
[    5.154121] tveeprom 1-0050: tuner model is LG TP18PSB01D (idx 47, type 28)
[    5.154127] tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04)
[    5.154132] tveeprom 1-0050: audio processor is MSP4418 (idx 25)
[    5.154136] tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
[    5.154140] tveeprom 1-0050: has radio, has IR receiver, has no IR 
transmitter
[    5.154144] ivtv0: Autodetected Hauppauge WinTV PVR-350
[    5.185387] [drm] nouveau 0000:01:00.0: ... appears to be valid
[    5.185393] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[    5.185400] [drm] nouveau 0000:01:00.0: BIT BIOS found
[    5.185405] [drm] nouveau 0000:01:00.0: Bios version 70.08.b6.00
[    5.185411] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[    5.185895] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[    5.185902] [drm] nouveau 0000:01:00.0: DCB version 4.0
[    5.185908] [drm] nouveau 0000:01:00.0: DCB outp 00: 01000302 00020030
[    5.185913] [drm] nouveau 0000:01:00.0: DCB outp 01: 02000300 00000000
[    5.185918] [drm] nouveau 0000:01:00.0: DCB outp 02: 08011392 00020020
[    5.185922] [drm] nouveau 0000:01:00.0: DCB outp 03: 04022310 00000000
[    5.185926] [drm] nouveau 0000:01:00.0: DCB conn 00: 00001030
[    5.185931] [drm] nouveau 0000:01:00.0: DCB conn 01: 00002161
[    5.185935] [drm] nouveau 0000:01:00.0: DCB conn 02: 00000200
[    5.185943] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 
0x6BC7
[    5.205972] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 
0x7223
[    5.213016] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 
0x84B8
[    5.213021] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 
0x84BC
[    5.213074] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 
0x85C3
[    5.213079] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 
0x8628
[    5.232930] [drm] nouveau 0000:01:00.0: 0x6B2C: Condition still not met 
after 20ms, skipping following opcodes
[    5.236138] [TTM] Zone  kernel: Available graphics memory: 4116720 kiB
[    5.236143] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    5.236147] [TTM] Initializing pool allocator
[    5.236158] [TTM] Initializing DMA pool allocator
[    5.236179] [drm] nouveau 0000:01:00.0: Detected 2048MiB VRAM (DDR3)
[    5.256445] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[    5.261189] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    5.261194] [drm] No driver support for vblank timestamp query.
[    5.495833] saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c 
driver #0)
[    5.580222] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[    5.580226] [drm] nouveau 0000:01:00.0: 0: core 50MHz shader 101MHz memory 
108MHz voltage 880mV
[    5.580229] [drm] nouveau 0000:01:00.0: 1: core 405MHz shader 810MHz memory 
270MHz voltage 900mV
[    5.580231] [drm] nouveau 0000:01:00.0: 3: core 810MHz shader 1620MHz memory 
400MHz voltage 1100mV
[    5.580234] [drm] nouveau 0000:01:00.0: c: core 405MHz shader 810MHz memory 
324MHz voltage 900mV fanspeed 25%
[    5.635409] saa7127 1-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
[    5.685641] i2c-core: driver [msp3400] using legacy suspend method
[    5.685650] i2c-core: driver [msp3400] using legacy resume method
[    5.697662] msp3400 1-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
[    5.697668] msp3400 1-0040: msp3400 supports nicam and radio, mode is 
autodetect and autoselect
[    5.700413] i2c-core: driver [tuner] using legacy suspend method
[    5.700418] i2c-core: driver [tuner] using legacy resume method
[    5.705081] tuner 1-0061: Tuner -1 found with type(s) Radio TV.
[    5.711445] [drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0x1a0000, bo 
ffff880232789800
[    5.711612] fbcon: nouveaufb (fb0) is primary device
[    5.734620] tuner-simple 1-0061: creating new instance
[    5.734626] tuner-simple 1-0061: type set to 28 (LG PAL_BG+FM (TPI8PSB01D))
[    5.740961] Console: switching to colour frame buffer device 240x67
[    5.743519] fb0: nouveaufb frame buffer device
[    5.743520] drm: registered panic notifier
[    5.743524] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on 
minor 0
[    5.743628] hda_intel: Disabling MSI
[    5.743709] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[    5.749194] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[    5.749258] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[    5.749321] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
[    5.749386] ivtv0: Registered device video24 for encoder PCM (320 kB)
[    5.749448] ivtv0: Registered device radio0 for encoder radio
[    5.749510] ivtv0: Registered device video16 for decoder MPG (1024 kB)
[    5.749570] ivtv0: Registered device vbi8 for decoder VBI (64 kB)
[    5.749630] ivtv0: Registered device vbi16 for decoder VOUT
[    5.749693] ivtv0: Registered device video48 for decoder YUV (1024 kB)
[    5.749697] ivtv0: Initialized card: Hauppauge WinTV PVR-350
[    5.749722] ivtv: End initialization
[    6.401508] ivtv 0000:05:06.0: firmware: agent aborted loading 
v4l-cx2341x-enc.fw (not found?)
[    6.401656] ivtv0: Retry loading firmware
[    6.556085] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[    6.588142] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[    6.620142] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[    6.652142] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[    6.668282] input: HDA NVidia HDMI/DP,pcm=9 as 
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input7
[    6.668443] input: HDA NVidia HDMI/DP,pcm=8 as 
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
[    6.668580] input: HDA NVidia HDMI/DP,pcm=7 as 
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9
[    6.668718] input: HDA NVidia HDMI/DP,pcm=3 as 
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
[    7.027671] ivtv 0000:05:06.0: firmware: agent aborted loading 
v4l-cx2341x-enc.fw (not found?)
[    7.027810] ivtv0: Failed to initialize on device video0
[    7.027844] ivtv0: Failed to initialize on device video16
[    7.027880] ivtv0: Failed to initialize on device vbi0
[    7.027906] ivtv0: Failed to initialize on device video24
[    7.027939] ivtv0: Failed to initialize on device vbi8
[    7.027983] ivtv0: Failed to initialize on device vbi16
[    7.028016] ivtv0: Failed to initialize on device radio0
[    7.028167] ivtv0: Failed to initialize on device video48
[    7.030891] ivtv0: Failed to initialize on device video32
[   19.748157] usb 9-3: device descriptor read/64, error -110
[   34.988164] usb 9-3: device descriptor read/64, error -110
[   35.228120] usb 9-3: new full-speed USB device number 3 using ohci_hcd
[   50.364100] usb 9-3: device descriptor read/64, error -110
[   65.604156] usb 9-3: device descriptor read/64, error -110
[   65.844161] usb 9-3: new full-speed USB device number 4 using ohci_hcd
[   76.252146] usb 9-3: device not accepting address 4, error -110
[   76.388128] usb 9-3: new full-speed USB device number 5 using ohci_hcd
[   86.796144] usb 9-3: device not accepting address 5, error -110
[   86.796176] hub 9-0:1.0: unable to enumerate USB device on port 3
[   87.060109] usb 8-4: new full-speed USB device number 2 using ohci_hcd
[   87.200035] usb 8-4: device descriptor read/64, error -32
[   87.428204] Adding 7812084k swap on /dev/sda3.  Priority:-1 extents:1 
across:7812084k 
[   87.444043] usb 8-4: device descriptor read/64, error -32
[   87.452488] EXT4-fs (sda8): re-mounted. Opts: (null)
[   87.684097] usb 8-4: new full-speed USB device number 3 using ohci_hcd
[   87.824065] usb 8-4: device descriptor read/64, error -32
[   87.841586] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[   87.931570] loop: module loaded
[   88.068049] usb 8-4: device descriptor read/64, error -32
[   88.308030] usb 8-4: new full-speed USB device number 4 using ohci_hcd
[   88.716101] usb 8-4: device not accepting address 4, error -32
[   88.852104] usb 8-4: new full-speed USB device number 5 using ohci_hcd
[   89.260095] usb 8-4: device not accepting address 5, error -32
[   89.260143] hub 8-0:1.0: unable to enumerate USB device on port 4
[   89.260195] usb 1-2: USB disconnect, device number 3
[   89.612163] usb 1-2: new low-speed USB device number 4 using xhci_hcd
[   89.661139] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[   89.661146] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   89.661151] usb 1-2: Product: USB Optical Mouse
[   89.661155] usb 1-2: Manufacturer: Logitech
[   89.661312] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc 
says 80 microframes
[   89.674410] input: Logitech USB Optical Mouse as 
/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input11
[   89.674655] generic-usb 0003:046D:C05A.0004: input,hidraw2: USB HID v1.11 
Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[   90.404410] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: 
(null)
[   90.461260] kjournald starting.  Commit interval 5 seconds
[   90.461518] EXT3-fs (sda1): using internal journal
[   90.461526] EXT3-fs (sda1): mounted filesystem with ordered data mode
[   90.487721] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: 
(null)
[   90.557877] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: 
(null)
[   91.321383] r8169 0000:03:00.0: firmware: agent loaded rtl_nic/rtl8168e-3.fw 
into memory
[   91.409227] r8169 0000:03:00.0: eth0: link down
[   91.409274] r8169 0000:03:00.0: eth0: link down
[   91.411074] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   92.964573] r8169 0000:03:00.0: eth0: link up
[   92.966344] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  103.688083] eth0: no IPv6 routers present
[  151.664547] usb 1-2: USB disconnect, device number 4
[  153.164162] usb 1-2: new low-speed USB device number 5 using xhci_hcd
[  153.212561] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[  153.212569] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  153.212574] usb 1-2: Product: USB Optical Mouse
[  153.212577] usb 1-2: Manufacturer: Logitech
[  153.212802] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc 
says 80 microframes
[  153.225836] input: Logitech USB Optical Mouse as 
/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input12
[  153.226157] generic-usb 0003:046D:C05A.0005: input,hidraw2: USB HID v1.11 
Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[  213.391984] usb 1-2: USB disconnect, device number 5
[  214.896162] usb 1-2: new low-speed USB device number 6 using xhci_hcd
[  214.944994] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[  214.945001] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  214.945006] usb 1-2: Product: USB Optical Mouse
[  214.945010] usb 1-2: Manufacturer: Logitech
[  214.945231] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc 
says 80 microframes
[  214.958264] input: Logitech USB Optical Mouse as 
/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input13
[  214.958559] generic-usb 0003:046D:C05A.0006: input,hidraw2: USB HID v1.11 
Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[  275.111397] usb 1-2: USB disconnect, device number 6
[  276.616161] usb 1-2: new low-speed USB device number 7 using xhci_hcd
[  276.665417] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[  276.665424] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  276.665429] usb 1-2: Product: USB Optical Mouse
[  276.665433] usb 1-2: Manufacturer: Logitech
[  276.665645] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc 
says 80 microframes
[  276.678684] input: Logitech USB Optical Mouse as 
/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input14
[  276.678979] generic-usb 0003:046D:C05A.0007: input,hidraw2: USB HID v1.11 
Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[  336.830816] usb 1-2: USB disconnect, device number 7
[  338.332161] usb 1-2: new low-speed USB device number 8 using xhci_hcd
[  338.380836] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[  338.380843] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  338.380848] usb 1-2: Product: USB Optical Mouse
[  338.380852] usb 1-2: Manufacturer: Logitech
[  338.381059] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc 
says 80 microframes
[  338.394101] input: Logitech USB Optical Mouse as 
/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input15
[  338.394340] generic-usb 0003:046D:C05A.0008: input,hidraw2: USB HID v1.11 
Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[  378.011917] EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 
665097
[  378.012097] EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 
662975
[  378.012224] EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 
662279
[  378.012305] EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 
30
[  378.012349] EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 
27
[  378.012364] EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 
26
[  378.012377] EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 
25
[  378.012391] EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 
24
[  378.012405] EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 
23
[  378.012417] EXT4-fs (sda4): 9 orphan inodes deleted
[  378.012421] EXT4-fs (sda4): recovery complete
[  378.176763] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: 
(null)
[  398.422241] usb 1-2: USB disconnect, device number 8
[  399.920160] usb 1-2: new low-speed USB device number 9 using xhci_hcd
[  399.969250] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[  399.969257] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  399.969262] usb 1-2: Product: USB Optical Mouse
[  399.969266] usb 1-2: Manufacturer: Logitech
[  399.969476] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc 
says 80 microframes
[  399.982524] input: Logitech USB Optical Mouse as 
/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input16
[  399.982767] generic-usb 0003:046D:C05A.0009: input,hidraw2: USB HID v1.11 
Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[  459.989647] usb 1-2: USB disconnect, device number 9
[  461.488161] usb 1-2: new low-speed USB device number 10 using xhci_hcd
[  461.536662] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[  461.536670] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  461.536675] usb 1-2: Product: USB Optical Mouse
[  461.536678] usb 1-2: Manufacturer: Logitech
[  461.536896] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc 
says 80 microframes
[  461.549925] input: Logitech USB Optical Mouse as 
/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input17
[  461.550225] generic-usb 0003:046D:C05A.000A: input,hidraw2: USB HID v1.11 
Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[  521.693050] usb 1-2: USB disconnect, device number 10
[  523.200160] usb 1-2: new low-speed USB device number 11 using xhci_hcd
[  523.249069] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[  523.249076] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  523.249081] usb 1-2: Product: USB Optical Mouse
[  523.249085] usb 1-2: Manufacturer: Logitech
[  523.249249] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc 
says 80 microframes
[  523.262337] input: Logitech USB Optical Mouse as 
/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input18
[  523.262634] generic-usb 0003:046D:C05A.000B: input,hidraw2: USB HID v1.11 
Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[  583.412463] usb 1-2: USB disconnect, device number 11
[  584.912161] usb 1-2: new low-speed USB device number 12 using xhci_hcd
[  584.961474] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[  584.961481] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  584.961486] usb 1-2: Product: USB Optical Mouse
[  584.961490] usb 1-2: Manufacturer: Logitech
[  584.961693] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc 
says 80 microframes
[  584.974747] input: Logitech USB Optical Mouse as 
/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input19
[  584.975044] generic-usb 0003:046D:C05A.000C: input,hidraw2: USB HID v1.11 
Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[  645.131863] usb 1-2: USB disconnect, device number 12
[  646.632161] usb 1-2: new low-speed USB device number 13 using xhci_hcd
[  646.680877] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[  646.680885] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  646.680890] usb 1-2: Product: USB Optical Mouse
[  646.680893] usb 1-2: Manufacturer: Logitech
[  646.681115] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc 
says 80 microframes
[  646.694141] input: Logitech USB Optical Mouse as 
/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input20
[  646.694416] generic-usb 0003:046D:C05A.000D: input,hidraw2: USB HID v1.11 
Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[  706.851265] usb 1-2: USB disconnect, device number 13
[  708.352161] usb 1-2: new low-speed USB device number 14 using xhci_hcd
[  708.401279] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[  708.401287] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  708.401292] usb 1-2: Product: USB Optical Mouse
[  708.401295] usb 1-2: Manufacturer: Logitech
[  708.401520] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc 
says 80 microframes
[  708.414538] input: Logitech USB Optical Mouse as 
/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input21
[  708.414852] generic-usb 0003:046D:C05A.000E: input,hidraw2: USB HID v1.11 
Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[  768.546668] usb 1-2: USB disconnect, device number 14
[  770.052162] usb 1-2: new low-speed USB device number 15 using xhci_hcd
[  770.100681] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[  770.100688] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  770.100694] usb 1-2: Product: USB Optical Mouse
[  770.100697] usb 1-2: Manufacturer: Logitech
[  770.100900] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc 
says 80 microframes
[  770.113982] input: Logitech USB Optical Mouse as 
/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input22
[  770.114305] generic-usb 0003:046D:C05A.000F: input,hidraw2: USB HID v1.11 
Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[  830.242070] usb 1-2: USB disconnect, device number 15
[  831.740159] usb 1-2: new low-speed USB device number 16 using xhci_hcd
[  831.789081] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[  831.789088] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  831.789093] usb 1-2: Product: USB Optical Mouse
[  831.789097] usb 1-2: Manufacturer: Logitech
[  831.789314] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc 
says 80 microframes
[  831.802353] input: Logitech USB Optical Mouse as 
/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input23
[  831.802652] generic-usb 0003:046D:C05A.0010: input,hidraw2: USB HID v1.11 
Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[  891.921464] usb 1-2: USB disconnect, device number 16
[  893.420160] usb 1-2: new low-speed USB device number 17 using xhci_hcd
[  893.469481] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[  893.469488] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  893.469493] usb 1-2: Product: USB Optical Mouse
[  893.469496] usb 1-2: Manufacturer: Logitech
[  893.469716] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc 
says 80 microframes
[  893.482748] input: Logitech USB Optical Mouse as 
/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input24
[  893.483059] generic-usb 0003:046D:C05A.0011: input,hidraw2: USB HID v1.11 
Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[  953.632866] usb 1-2: USB disconnect, device number 17
[  955.132160] usb 1-2: new low-speed USB device number 18 using xhci_hcd
[  955.180881] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[  955.180888] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  955.180894] usb 1-2: Product: USB Optical Mouse
[  955.180897] usb 1-2: Manufacturer: Logitech
[  955.181102] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc 
says 80 microframes
[  955.194149] input: Logitech USB Optical Mouse as 
/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input25
[  955.194443] generic-usb 0003:046D:C05A.0012: input,hidraw2: USB HID v1.11 
Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 1015.352253] usb 1-2: USB disconnect, device number 18
[ 1016.852161] usb 1-2: new low-speed USB device number 19 using xhci_hcd
[ 1016.901281] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 1016.901288] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1016.901293] usb 1-2: Product: USB Optical Mouse
[ 1016.901296] usb 1-2: Manufacturer: Logitech
[ 1016.901454] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc 
says 80 microframes
[ 1016.914550] input: Logitech USB Optical Mouse as 
/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input26
[ 1016.914848] generic-usb 0003:046D:C05A.0013: input,hidraw2: USB HID v1.11 
Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 1077.071665] usb 1-2: USB disconnect, device number 19
[ 1078.572161] usb 1-2: new low-speed USB device number 20 using xhci_hcd
[ 1078.620679] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 1078.620687] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1078.620692] usb 1-2: Product: USB Optical Mouse
[ 1078.620695] usb 1-2: Manufacturer: Logitech
[ 1078.620898] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc 
says 80 microframes
[ 1078.633943] input: Logitech USB Optical Mouse as 
/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input27
[ 1078.634213] generic-usb 0003:046D:C05A.0014: input,hidraw2: USB HID v1.11 
Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 1138.655062] usb 1-2: USB disconnect, device number 20
[ 1140.160160] usb 1-2: new low-speed USB device number 21 using xhci_hcd
[ 1140.209079] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 1140.209086] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1140.209091] usb 1-2: Product: USB Optical Mouse
[ 1140.209095] usb 1-2: Manufacturer: Logitech
[ 1140.209303] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc 
says 80 microframes
[ 1140.222346] input: Logitech USB Optical Mouse as 
/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input28
[ 1140.222652] generic-usb 0003:046D:C05A.0015: input,hidraw2: USB HID v1.11 
Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 1200.374461] usb 1-2: USB disconnect, device number 21
[ 1201.876161] usb 1-2: new low-speed USB device number 22 using xhci_hcd
[ 1201.925477] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 1201.925484] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1201.925489] usb 1-2: Product: USB Optical Mouse
[ 1201.925493] usb 1-2: Manufacturer: Logitech
[ 1201.925652] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc 
says 80 microframes
[ 1201.938736] input: Logitech USB Optical Mouse as 
/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input29
[ 1201.939056] generic-usb 0003:046D:C05A.0016: input,hidraw2: USB HID v1.11 
Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 1261.965859] usb 1-2: USB disconnect, device number 22
[ 1263.464166] usb 1-2: new low-speed USB device number 23 using xhci_hcd
[ 1263.512878] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 1263.512885] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1263.512890] usb 1-2: Product: USB Optical Mouse
[ 1263.512894] usb 1-2: Manufacturer: Logitech
[ 1263.513059] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc 
says 80 microframes
[ 1263.526132] input: Logitech USB Optical Mouse as 
/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input30
[ 1263.526433] generic-usb 0003:046D:C05A.0017: input,hidraw2: USB HID v1.11 
Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0

lsmod:
Module                  Size  Used by
ext3                  161867  1 
jbd                    56902  1 ext3
loop                   22641  0 
snd_hda_codec_hdmi     30824  4 
tuner_simple           17175  1 
tuner_types            16409  1 tuner_simple
tuner                  17497  1 
msp3400                30314  1 
saa7127                13197  1 
saa7115                17667  1 
snd_hda_codec_realtek   188858  1 
nouveau               587481  1 
ivtv                  129010  0 
snd_hda_intel          26259  0 
snd_hda_codec          78031  3 
snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi
cx2341x                21461  1 ivtv
tveeprom               20593  1 ivtv
v4l2_common            13222  6 cx2341x,ivtv,saa7115,saa7127,msp3400,tuner
videodev               70889  7 
v4l2_common,cx2341x,ivtv,saa7115,saa7127,msp3400,tuner
snd_hwdep              13186  1 snd_hda_codec
snd_pcm                68083  3 snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi
snd_page_alloc         13003  2 snd_pcm,snd_hda_intel
snd_timer              22917  1 snd_pcm
v4l2_compat_ioctl32    16655  1 videodev
video                  17683  1 nouveau
ttm                    53664  1 nouveau
snd                    52889  7 
snd_timer,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi
media                  18148  1 videodev
powernow_k8            17618  0 
mperf                  12453  1 powernow_k8
crc32c_intel           12747  0 
ghash_clmulni_intel    13173  0 
aesni_intel            50667  0 
drm_kms_helper         31370  1 nouveau
aes_x86_64             16843  1 aesni_intel
drm                   183952  3 drm_kms_helper,ttm,nouveau
mxm_wmi                12515  1 nouveau
power_supply           13475  1 nouveau
edac_mce_amd           17103  0 
sp5100_tco             12900  0 
edac_core              35258  0 
psmouse                64497  0 
i2c_algo_bit           12841  2 ivtv,nouveau
evdev                  17562  9 
soundcore              13065  1 snd
processor              28157  7 powernow_k8
k10temp                12611  0 
fam15h_power           12677  0 
i2c_piix4              12536  0 
i2c_core               23876  14 
i2c_piix4,i2c_algo_bit,drm,drm_kms_helper,videodev,v4l2_common,tveeprom,ivtv,nouveau,saa7115,saa7127,msp3400,tuner,tuner_simple
joydev                 17266  0 
serio_raw              12931  0 
pcspkr                 12579  0 
wmi                    13243  2 mxm_wmi,nouveau
aes_generic            33026  2 aes_x86_64,aesni_intel
thermal_sys            18040  2 processor,video
button                 12937  1 nouveau
cryptd                 14517  2 aesni_intel,ghash_clmulni_intel
ext4                  350602  5 
crc16                  12343  1 ext4
jbd2                   62065  1 ext4
mbcache                13114  2 ext4,ext3
sg                     25874  0 
sr_mod                 21899  0 
cdrom                  35401  1 sr_mod
sd_mod                 36136  8 
crc_t10dif             12348  1 sd_mod
ata_generic            12479  0 
usbhid                 36418  0 
hid                    81328  1 usbhid
ohci_hcd               26563  0 
pata_atiixp            12736  0 
firewire_ohci          35772  0 
ahci                   24997  7 
libahci                22860  1 ahci
firewire_core          48449  1 firewire_ohci
crc_itu_t              12347  1 firewire_core
r8169                  46972  0 
mii                    12675  1 r8169
ehci_hcd               40215  0 
libata                140630  4 libahci,ahci,pata_atiixp,ata_generic
xhci_hcd               73434  0 
scsi_mod              162269  4 libata,sd_mod,sr_mod,sg
usbcore               128741  5 xhci_hcd,ehci_hcd,ohci_hcd,usbhid
usb_common             12354  1 usbcore

lspci:
00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI 
bridge (external gfx0 port B) (rev 02)
00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI 
bridge (PCI express gpp port B)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI 
bridge (PCI express gpp port D)
00:09.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI 
bridge (PCI express gpp port H)
00:0a.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI 
bridge (external gfx1 port A)
00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 
SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 
USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 
USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 
USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 
USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 
42)
00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 
IDE Controller (rev 40)
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel 
HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC 
host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI 
Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 
USB OHCI2 Controller
00:16.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 
USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 
USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 
1
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 
2
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 
3
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 
4
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 
5
01:00.0 VGA compatible controller: NVIDIA Corporation GK107 [GeForce GT 630] 
(rev a1)
01:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller 
(rev a1)
02:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller 
(rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI 
Express Gigabit Ethernet controller (rev 06)
04:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller 
(rev 01)
05:06.0 Multimedia video controller: Internext Compression Inc iTVC15 (CX23415) 
Video Decoder (rev 01)
05:0e.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] 
IEEE 1394 OHCI Controller (rev c0)

lsusb:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business
Bus 001 Device 023: ID 046d:c05a Logitech, Inc. Optical Mouse M90
Bus 005 Device 002: ID 14f7:0500 TechniSat Digital GmbH DVB-PC TV Star HD

--- End Message ---

--- Begin Message ---

Hi

This bug was filed for a very old kernel or the bug is old itself
without resolution.

If you can reproduce it with

- the current version in unstable/testing
- the latest kernel from backports

please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.

Regards,
Salvatore

--- End Message ---