Your message dated Sat, 24 Apr 2021 12:08:29 -0700 (PDT) with message-id <60846cad.1c69fb81.90c63.c...@mx.google.com> and subject line Closing this bug (BTS maintenance for src:linux bugs) has caused the Debian Bug report #732378, regarding linux-image-3.2.0-4-amd64: Msi regression with xen domUs using virtio devices to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 732378: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=732378 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
--- Begin Message ---Package: src:linux Version: 3.2.51-1 Severity: normal With Squeeze, virtio devices works correctly on xen pvhvm domUs. Whereas With Wheezy pci=nomsi kernel parameter is necessary to have virtio devices working. Therefore it seems there is a kernel regression about msi between version 2.6.32 (used by Squeeze) and 3.2 (used by Wheezy). Thanks for any reply. -- Package-specific info: ** Version: Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.51-1 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=4f5fc11b-8d32-405f-8fd3-3dd5318c25b2 ro console=tty0 xen_emul_unplug=never pci=nomsi ** Not tainted ** Kernel log: [ 0.903786] acpiphp: Slot [14] registered [ 0.905007] acpiphp: Slot [15] registered [ 0.906159] acpiphp: Slot [16] registered [ 0.907330] acpiphp: Slot [17] registered [ 0.908546] acpiphp: Slot [18] registered [ 0.909710] acpiphp: Slot [19] registered [ 0.911003] acpiphp: Slot [20] registered [ 0.912190] acpiphp: Slot [21] registered [ 0.913412] acpiphp: Slot [22] registered [ 0.914557] acpiphp: Slot [23] registered [ 0.915686] acpiphp: Slot [24] registered [ 0.916905] acpiphp: Slot [25] registered [ 0.918082] acpiphp: Slot [26] registered [ 0.919225] acpiphp: Slot [27] registered [ 0.920389] acpiphp: Slot [28] registered [ 0.921524] acpiphp: Slot [29] registered [ 0.922666] acpiphp: Slot [30] registered [ 0.923796] acpiphp: Slot [31] registered [ 0.925158] intel_idle: does not run on family 6 model 30 [ 0.925176] ERST: Table is not found! [ 0.926265] GHES: HEST is not enabled! [ 0.927448] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.956543] Linux agpgart interface v0.103 [ 0.957935] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.962005] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.963231] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.964678] mousedev: PS/2 mouse device common for all mice [ 0.967957] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.970572] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.971886] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs [ 0.973210] cpuidle: using governor ladder [ 1.015875] hpet1: lost 1 rtc interrupts [ 1.017155] cpuidle: using governor menu [ 1.018558] TCP cubic registered [ 1.019805] NET: Registered protocol family 10 [ 1.022166] Mobile IPv6 [ 1.023198] NET: Registered protocol family 17 [ 1.024369] Registering the dns_resolver key type [ 1.025804] PM: Hibernation image not present or could not be loaded. [ 1.025823] registered taskstats version 1 [ 1.028071] rtc_cmos 00:05: setting system clock to 2013-12-17 12:11:36 UTC (1387282296) [ 1.029932] Initializing network drop monitor service [ 1.036675] Freeing unused kernel memory: 576k freed [ 1.037978] Write protecting the kernel read-only data: 6144k [ 1.041645] Freeing unused kernel memory: 652k freed [ 1.045279] Freeing unused kernel memory: 688k freed [ 1.060199] udevd[50]: starting version 175 [ 1.073375] xen: --> pirq=20 -> irq=28 (gsi=28) [ 1.073473] virtio-pci 0000:00:03.0: setting latency timer to 64 [ 1.074082] xen: --> pirq=21 -> irq=36 (gsi=36) [ 1.074175] virtio-pci 0000:00:05.0: setting latency timer to 64 [ 1.090330] SCSI subsystem initialized [ 1.108918] libata version 3.00 loaded. [ 1.109435] ata_piix 0000:00:01.1: version 2.13 [ 1.109775] ata_piix 0000:00:01.1: setting latency timer to 64 [ 1.111154] scsi0 : ata_piix [ 1.114948] scsi1 : ata_piix [ 1.116146] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc140 irq 14 [ 1.117479] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc148 irq 15 [ 1.138633] FDC 0 is a S82078B [ 1.278350] ata1.01: NODEV after polling detection [ 1.279326] ata1.00: ATA-7: QEMU HARDDISK, 1.3.1, max UDMA/100 [ 1.280568] ata1.00: 20480000 sectors, multi 16: LBA48 [ 1.283391] ata1.00: configured for MWDMA2 [ 1.284667] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 1.3. PQ: 0 ANSI: 5 [ 1.295004] sd 0:0:0:0: [sda] 20480000 512-byte logical blocks: (10.4 GB/9.76 GiB) [ 1.296998] sd 0:0:0:0: [sda] Write Protect is off [ 1.298171] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.298193] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.303076] sda: sda1 sda2 [ 1.304608] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.307363] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.574520] PM: Starting manual resume from disk [ 1.576291] PM: Hibernation image partition 8:2 present [ 1.576293] PM: Looking for hibernation image. [ 1.578028] PM: Image not found (code -22) [ 1.578030] PM: Hibernation image not present or could not be loaded. [ 1.607672] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.848071] Refined TSC clocksource calibration: 2661.106 MHz. [ 2.060362] udevd[302]: starting version 175 [ 2.231183] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 2.252756] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.258268] piix4_smbus 0000:00:01.3: Host SMBus controller not enabled! [ 2.260492] ACPI: Power Button [PWRF] [ 2.263100] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3 [ 2.266191] ACPI: Sleep Button [SLPF] [ 2.298279] Error: Driver 'pcspkr' is already registered, aborting... [ 2.730330] Adding 961532k swap on /dev/sda2. Priority:-1 extents:1 across:961532k [ 2.749043] EXT4-fs (sda1): re-mounted. Opts: (null) [ 2.888644] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 2.922925] loop: module loaded [ 2.939381] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4 [ 3.592669] RPC: Registered named UNIX socket transport module. [ 3.594474] RPC: Registered udp transport module. [ 3.595669] RPC: Registered tcp transport module. [ 3.597062] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.606764] FS-Cache: Loaded [ 3.620833] FS-Cache: Netfs 'nfs' registered for caching [ 3.628001] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 14.896228] eth0: no IPv6 routers present ** Model information sys_vendor: Xen product_name: HVM domU product_version: 4.4-unstable chassis_vendor: Xen chassis_version: bios_vendor: Xen bios_version: 4.4-unstable ** Loaded modules: nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc loop snd_pcm snd_page_alloc snd_timer snd processor i2c_piix4 button thermal_sys virtio_console crc32c_intel soundcore evdev i2c_core psmouse serio_raw pcspkr ext4 crc16 jbd2 mbcache sg sd_mod crc_t10dif ata_generic virtio_net floppy ata_piix libata scsi_mod virtio_pci virtio_ring virtio ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet dhcp ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:16:3e:4a:e5:3f brd ff:ff:ff:ff:ff:ff inet 192.168.1.60/24 brd 192.168.1.255 scope global eth0 inet6 fe80::216:3eff:fe4a:e53f/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth0: 3245678 3378 0 0 0 0 0 0 357341 2456 0 0 0 0 0 0 *** Protocol statistics: Ip: 3250 total packets received 5 with invalid addresses 0 forwarded 0 incoming packets discarded 3244 incoming packets delivered 2417 requests sent out Icmp: 3 ICMP messages received 0 input ICMP message failed. ICMP input histogram: echo replies: 3 3 ICMP messages sent 0 ICMP messages failed ICMP output histogram: echo request: 3 IcmpMsg: InType0: 3 OutType8: 3 Tcp: 6 active connections openings 1 passive connection openings 0 failed connection attempts 0 connection resets received 1 connections established 3096 segments received 2400 segments send out 2 segments retransmited 0 bad segments received. 0 resets sent Udp: 27 packets received 0 packets to unknown port received. 0 packet receive errors 27 packets sent UdpLite: TcpExt: 4 delayed acks sent 1 packets directly queued to recvmsg prequeue. 1 bytes directly received in process context from prequeue 2298 packet headers predicted 566 acknowledgments not containing data payload received 13 predicted acknowledgments 2 congestion windows recovered without slow start after partial ack 2 other TCP timeouts 5 DSACKs sent for old packets 2 DSACKs received TCPSackShiftFallback: 2 IpExt: InMcastPkts: 8 InBcastPkts: 110 InOctets: 3192221 OutOctets: 320757 InMcastOctets: 256 InBcastOctets: 13829 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02) Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100] Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000] Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100] Physical Slot: 1 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:01.1 IDE interface [0101]: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] [8086:7010] (prog-if 80 [Master]) Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100] Physical Slot: 1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at c140 [size=16] Kernel driver in use: ata_piix 00:01.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 03) Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100] Physical Slot: 1 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 9 00:02.0 Unassigned class [ff80]: XenSource, Inc. Xen Platform Device [5853:0001] (rev 01) Subsystem: XenSource, Inc. Xen Platform Device [5853:0001] Physical Slot: 2 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at c000 [size=256] Region 1: Memory at f0000000 (32-bit, prefetchable) [size=16M] 00:03.0 Communication controller [0780]: Red Hat, Inc Virtio console [1af4:1003] Subsystem: Red Hat, Inc Device [1af4:0003] Physical Slot: 3 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 28 Region 0: I/O ports at c100 [size=32] Region 1: Memory at f2020000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] MSI-X: Enable- Count=32 Masked- Vector table: BAR=1 offset=00000000 PBA: BAR=1 offset=00000800 Kernel driver in use: virtio-pci 00:04.0 VGA compatible controller [0300]: Device [1234:1111] (prog-if 00 [VGA controller]) Subsystem: Red Hat, Inc Device [1af4:1100] Physical Slot: 4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f1000000 (32-bit, prefetchable) [size=16M] Region 2: Memory at f2021000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at f2000000 [disabled] [size=64K] 00:05.0 Ethernet controller [0200]: Red Hat, Inc Virtio network device [1af4:1000] Subsystem: Red Hat, Inc Device [1af4:0001] Physical Slot: 5 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 36 Region 0: I/O ports at c120 [size=32] Region 1: Memory at f2022000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at f2010000 [disabled] [size=64K] Capabilities: [40] MSI-X: Enable- Count=3 Masked- Vector table: BAR=1 offset=00000000 PBA: BAR=1 offset=00000800 Kernel driver in use: virtio-pci ** USB devices: not available -- System Information: Debian Release: 7.3 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores) Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.109.1 ii kmod 9-3 ii linux-base 3.5 Versions of packages linux-image-3.2.0-4-amd64 recommends: pn firmware-linux-free <none> Versions of packages linux-image-3.2.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-27+deb7u2 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
--- End Message ---
--- Begin Message ---Hi This bug was filed for a very old kernel or the bug is old itself without resolution. If you can reproduce it with - the current version in unstable/testing - the latest kernel from backports please reopen the bug, see https://www.debian.org/Bugs/server-control for details. Regards, Salvatore
--- End Message ---
