Package: src:linux Version: 5.10.13-1 Severity: wishlist Dear Maintainer,
Latest autopkgtest Salsa supports arm64&armhf QEMU testbeds. When we apply autopkgtest-virt-qemu --dpkg-architecture=arm64 or armhf on systemd, the "storage" test fails because of modprobe: FATAL: Module scsi_debug not found in directory /lib/modules/5.10.0-3-arm64 I talked with Michael Biebl on https://salsa.debian.org/ci-team/autopkgtest/-/merge_requests/113#note_227958 he wondered if it is possible to enable scsi_debug on arm64&armhf. Best regards, Ryutaroh Matsumoto -- Package-specific info: ** Version: Linux version 5.10.0-3-arm64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.1) #1 SMP Debian 5.10.13-1 (2021-02-06) ** Command line: dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x488d2af3 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=DC:A6:32:BB:99:D9 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0 rootwait rootfstype=ext4 module_blacklist=vc4 ** Tainted: C (1024) * staging driver was loaded ** Kernel log: [ 20.631603] systemd[1]: Mounting Huge Pages File System... [ 20.683486] systemd[1]: Mounting POSIX Message Queue File System... [ 20.736492] systemd[1]: Mounting Kernel Debug File System... [ 20.787618] systemd[1]: Mounting Kernel Trace File System... [ 20.836925] systemd[1]: Starting Restore / save the current clock... [ 20.889264] systemd[1]: Starting Set the console keyboard layout... [ 20.940552] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 20.992153] systemd[1]: Starting Load Kernel Module configfs... [ 21.044220] systemd[1]: Starting Load Kernel Module drm... [ 21.095387] systemd[1]: Starting Load Kernel Module fuse... [ 21.138735] fuse: init (API version 7.32) [ 21.163989] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 21.164255] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 21.227986] systemd[1]: Starting Journal Service... [ 21.464155] systemd[1]: Starting Load Kernel Modules... [ 21.513840] systemd[1]: Starting Remount Root and Kernel File Systems... [ 21.563344] EXT4-fs (sda2): re-mounted. Opts: journal_async_commit,nobarrier,data=writeback,commit=3600 [ 21.564141] systemd[1]: Starting Coldplug All udev Devices... [ 21.651478] systemd[1]: Mounted Huge Pages File System. [ 21.694010] systemd[1]: Started Journal Service. [ 22.064408] systemd-journald[243]: Received client request to flush runtime journal. [ 37.861091] vcc-sd: disabling [ 39.399477] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 39.439887] vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 39.488816] iproc-rng200 fe104000.rng: hwrng registered [ 39.516318] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 39.610584] Module vc4 is blacklisted [ 39.638493] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 39.657619] cfg80211: Loaded X.509 cert 'b...@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 39.678583] cfg80211: Loaded X.509 cert 'romain.per...@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 39.700179] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 39.706556] io scheduler kyber registered [ 39.719922] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 39.787993] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 39.813752] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 39.844975] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 39.863636] usbcore: registered new interface driver brcmfmac [ 39.877152] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 39.905384] bcm2835_audio bcm2835_audio: card created with 8 channels [ 39.907090] brcmfmac mmc0:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.bin [ 39.925440] mc: Linux media interface: v0.10 [ 39.956391] brcmfmac mmc0:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt [ 40.102108] videodev: Linux video capture interface: v2.00 [ 40.107976] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 40.108103] brcmfmac mmc0:0001:1: firmware: failed to load brcm/brcmfmac43455-sdio.clm_blob (-2) [ 40.108107] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 40.108113] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 40.109706] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4 [ 40.117310] cryptd: max_cpu_qlen set to 1000 [ 40.149737] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 40.218500] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 40.365211] Adding 10485736k swap on /dev/sda3. Priority:-2 extents:1 across:10485736k FS [ 40.517919] Bluetooth: Core ver 2.22 [ 40.521931] NET: Registered protocol family 31 [ 40.526640] Bluetooth: HCI device and connection manager initialized [ 40.533231] Bluetooth: HCI socket layer initialized [ 40.538359] Bluetooth: L2CAP socket layer initialized [ 40.543720] Bluetooth: SCO socket layer initialized [ 40.614172] Bluetooth: HCI UART driver ver 2.3 [ 40.618890] Bluetooth: HCI UART protocol H4 registered [ 40.624398] Bluetooth: HCI UART protocol LL registered [ 40.629730] Bluetooth: HCI UART protocol ATH3K registered [ 40.635454] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 40.642291] Bluetooth: HCI UART protocol Intel registered [ 40.648379] Bluetooth: HCI UART protocol Broadcom registered [ 40.654396] Bluetooth: HCI UART protocol QCA registered [ 40.658544] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator [ 40.659789] Bluetooth: HCI UART protocol AG6XX registered [ 40.667921] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator [ 40.673192] Bluetooth: HCI UART protocol Marvell registered [ 40.811324] uart-pl011 fe201000.serial: no DMA platform data [ 40.915175] audit: type=1400 audit(1613290449.815:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=495 comm="apparmor_parser" [ 40.932751] audit: type=1400 audit(1613290449.815:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=494 comm="apparmor_parser" [ 40.951754] audit: type=1400 audit(1613290449.823:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=497 comm="apparmor_parser" [ 40.969680] audit: type=1400 audit(1613290449.843:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=499 comm="apparmor_parser" [ 40.986733] audit: type=1400 audit(1613290449.879:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=502 comm="apparmor_parser" [ 41.003996] audit: type=1400 audit(1613290449.879:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=502 comm="apparmor_parser" [ 41.021856] audit: type=1400 audit(1613290449.887:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=503 comm="apparmor_parser" [ 41.037354] audit: type=1400 audit(1613290449.887:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=503 comm="apparmor_parser" [ 41.053949] audit: type=1400 audit(1613290449.887:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=503 comm="apparmor_parser" [ 41.077660] Bluetooth: hci0: BCM: chip id 107 [ 41.082464] Bluetooth: hci0: BCM: features 0x2f [ 41.088685] Bluetooth: hci0: BCM4345C0 [ 41.092589] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 [ 41.098790] bluetooth hci0: firmware: failed to load brcm/BCM4345C0.hcd (-2) [ 41.106136] bluetooth hci0: firmware: failed to load brcm/BCM.hcd (-2) [ 41.113611] Bluetooth: hci0: BCM: firmware Patch file not found, tried: [ 41.121157] Bluetooth: hci0: BCM: 'brcm/BCM4345C0.hcd' [ 41.127027] Bluetooth: hci0: BCM: 'brcm/BCM.hcd' [ 41.137868] audit: type=1400 audit(1613290450.039:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=493 comm="apparmor_parser" [ 42.311901] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 42.318100] Bluetooth: BNEP filters: protocol multicast [ 42.324169] Bluetooth: BNEP socket layer initialized [ 42.346307] NET: Registered protocol family 38 [ 42.913766] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 42.923972] bcmgenet fd580000.ethernet eth0: Link is Down [ 52.080688] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 54.783393] rfkill: input handler disabled [ 60.769413] rfkill: input handler enabled [ 131.607272] hrtimer: interrupt took 8448 ns ** Model information Device Tree model: Raspberry Pi 4 Model B Rev 1.4 ** Loaded modules: algif_hash algif_skcipher af_alg bnep binfmt_misc nls_ascii nls_cp437 vfat fat hci_uart btqca btrtl btbcm btsdio btintel bluetooth jitterentropy_rng aes_neon_bs bcm2835_v4l2(C) bcm2835_mmal_vchiq(C) videobuf2_vmalloc videobuf2_memops aes_neon_blk videobuf2_v4l2 crypto_simd videobuf2_common cryptd videodev mc snd_bcm2835(C) drbg brcmfmac aes_arm64 brcmutil aes_generic kyber_iosched ansi_cprng cfg80211 joydev ecdh_generic rfkill snd_soc_core evdev ecc sg iproc_rng200 snd_pcm_dmaengine libaes snd_pcm vchiq(C) pwm_bcm2835 snd_timer snd rng_core bcm2835_wdt soundcore cec bcm2711_thermal drm_kms_helper leds_gpio cpufreq_dt drm fuse configfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 btrfs blake2b_generic sd_mod t10_pi crc_t10dif crct10dif_generic xor xor_neon hid_generic usbhid hid uas usb_storage scsi_mod raid6_pq libcrc32c crc32c_generic vhost_net tun vhost vhost_iotlb tap bfq dwc2 xhci_pci broadcom udc_core bcm_phy_lib xhci_hcd roles mdio_bcm_unimac genet usbcore of_mdio crct10dif_ce crct10dif_common sdhci_iproc raspberrypi_cpufreq reset_raspberrypi i2c_bcm2835 sdhci_pltfm usb_common fixed_phy libphy fixed sdhci gpio_regulator phy_generic ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000 link/ether dc:a6:32:bb:99:d9 brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether dc:a6:32:bb:99:da brd ff:ff:ff:ff:ff:ff inet 192.168.1.84/24 brd 192.168.1.255 scope global dynamic noprefixroute wlan0 valid_lft 39922sec preferred_lft 39922sec inet6 2400:4050:2ba1:ac00:c5d7:4a4d:b3f9:a36f/64 scope global dynamic noprefixroute valid_lft 14105sec preferred_lft 12305sec inet6 fe80::115b:96a0:c28:c09d/64 scope link noprefixroute valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 97496 822 0 0 0 0 0 0 97496 822 0 0 0 0 0 0 eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 wlan0: 15011736027 10726265 0 0 0 0 0 1945 128160875 1350346 0 0 0 0 0 0 ** PCI devices: 00:00.0 PCI bridge [0604]: Broadcom Inc. and subsidiaries BCM2711 PCIe Bridge [14e4:2711] (rev 10) (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/scb/pcie@7d500000/pci@1,0 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 50 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00000000-00000fff [size=4K] Memory behind bridge: f8000000-f80fffff [size=1M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [48] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME- Capabilities: [ac] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 512 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <2us ClockPM+ Surprise- LLActRep- BwNot+ ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s (ok), Width x1 (ok) TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt+ RootCap: CRSVisible+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible+ RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+ 10BitTagComp- 10BitTagReq- OBFF Via WAKE#, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd- AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ OBFF Disabled, ARIFwd- AtomicOpsCtl: ReqEn- EgressBlck- LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 2Retimers- DRS+ LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported, DRS- DownstreamComp: Link Down - Not Determined Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 RootCmd: CERptEn+ NFERptEn+ FERptEn+ RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd- FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0 ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000 Capabilities: [180 v1] Vendor Specific Information: ID=0000 Rev=0 Len=028 <?> Capabilities: [240 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=8us PortTPowerOnTime=10us L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- T_CommonMode=1us LTR1.2_Threshold=0ns L1SubCtl2: T_PwrOn=10us Kernel driver in use: pcieport 01:00.0 USB controller [0c03]: VIA Technologies, Inc. VL805 USB 3.0 Host Controller [1106:3483] (rev 01) (prog-if 30 [XHCI]) Subsystem: VIA Technologies, Inc. VL805 USB 3.0 Host Controller [1106:3483] Device tree node: /sys/firmware/devicetree/base/scb/pcie@7d500000/pci@1,0/usb@1,0 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 51 Region 0: Memory at 600000000 (64-bit, non-prefetchable) [size=4K] Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot-,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] MSI: Enable+ Count=1/4 Maskable- 64bit+ Address: 00000000fffffffc Data: 6540 Capabilities: [c4] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <16us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s (ok), Width x1 (ok) TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range B, TimeoutDis+ NROPrPrP- LTR- 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled, AtomicOpsCtl: ReqEn- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis+ Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Kernel driver in use: xhci_hcd Kernel modules: xhci_pci ** USB devices: Bus 002 Device 002: ID 056e:6a13 Elecom Co., Ltd ESD-EMN Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 1a2c:4324 China Resource Semico Co., Ltd USB Keyboard Bus 001 Device 003: ID 15ca:00c3 Textech International Ltd. Mini Optical Mouse Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: bullseye/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental') Architecture: arm64 (aarch64) Kernel: Linux 5.10.0-3-arm64 (SMP w/4 CPU threads) Kernel taint flags: TAINT_CRAP Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-5.10.0-3-arm64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.139 ii kmod 28-1 ii linux-base 4.6 Versions of packages linux-image-5.10.0-3-arm64 recommends: ii apparmor 2.13.6-9 ii firmware-linux-free 20200122-1 Versions of packages linux-image-5.10.0-3-arm64 suggests: pn debian-kernel-handbook <none> pn linux-doc-5.10 <none> Versions of packages linux-image-5.10.0-3-arm64 is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> ii firmware-brcm80211 20201218-3 pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> ii firmware-misc-nonfree 20201218-3 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
