--- Begin Message ---
Package: src:linux
Version: 4.19.160-2
Severity: important
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
Upgrade to linux-image-4.19.0-13-amd64 makes apcupsd unable to
contact UPS through USB
* What exactly did you do (or not do) that was effective (or
ineffective)?
Downgrading to 4.19.0-12 makes apcupsd contact UPS again
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these template lines ***
-- Package-specific info:
** Version:
Linux version 4.19.0-13-amd64 (debian-kernel@lists.debian.org) (gcc version
8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.160-2 (2020-11-28)
** Command line:
BOOT_IMAGE=/vmlinuz-4.19.0-13-amd64 root=/dev/mapper/system_vg-root_lv ro quiet
** Not tainted
** Kernel log:
[ 0.000000] Linux version 4.19.0-13-amd64 (debian-kernel@lists.debian.org)
(gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.160-2 (2020-11-28)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.19.0-13-amd64
root=/dev/mapper/system_vg-root_lv ro quiet
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffa0000-0x00000000bffadfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bffae000-0x00000000bffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: System manufacturer System Product Name/A8R32-MVP Deluxe,
BIOS 0701 03/03/2007
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2205.048 MHz processor
[ 0.007363] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.007366] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.018480] AGP: No AGP bridge found
[ 0.018583] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.018588] MTRR default type: uncachable
[ 0.018589] MTRR fixed ranges enabled:
[ 0.018591] 00000-9FFFF write-back
[ 0.018592] A0000-EFFFF uncachable
[ 0.018594] F0000-FFFFF write-protect
[ 0.018594] MTRR variable ranges enabled:
[ 0.018596] 0 base 0000000000 mask FF00000000 write-back
[ 0.018598] 1 base 0100000000 mask FFC0000000 write-back
[ 0.018600] 2 base 00C0000000 mask FFC0000000 uncachable
[ 0.018600] 3 disabled
[ 0.018601] 4 disabled
[ 0.018602] 5 disabled
[ 0.018602] 6 disabled
[ 0.018603] 7 disabled
[ 0.019120] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.019185] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.019194] last_pfn = 0xbffa0 max_arch_pfn = 0x400000000
[ 0.024428] found SMP MP-table at [mem 0x000ff780-0x000ff78f]
[ 0.056784] RAMDISK: [mem 0x34a0d000-0x364fdfff]
[ 0.056794] ACPI: Early table checksum verification disabled
[ 0.057190] ACPI: RSDP 0x00000000000FAD00 000024 (v02 ACPIAM)
[ 0.057194] ACPI: XSDT 0x00000000BFFA0100 000044 (v01 A_M_I_ OEMXSDT
03000703 MSFT 00000097)
[ 0.057201] ACPI: FACP 0x00000000BFFA0290 0000F4 (v03 A_M_I_ OEMFACP
03000703 MSFT 00000097)
[ 0.057208] ACPI: DSDT 0x00000000BFFA0430 006E70 (v01 A0466 A0466001
00000001 INTL 02002026)
[ 0.057212] ACPI: FACS 0x00000000BFFAE000 000040
[ 0.057215] ACPI: FACS 0x00000000BFFAE000 000040
[ 0.057218] ACPI: APIC 0x00000000BFFA0390 00005C (v01 A_M_I_ OEMAPIC
03000703 MSFT 00000097)
[ 0.057221] ACPI: MCFG 0x00000000BFFA03F0 00003C (v01 A_M_I_ OEMMCFG
03000703 MSFT 00000097)
[ 0.057225] ACPI: OEMB 0x00000000BFFAE040 00007B (v01 A_M_I_ AMI_OEM
03000703 MSFT 00000097)
[ 0.057238] ACPI: Local APIC address 0xfee00000
[ 0.057370] Scanning NUMA topology in Northbridge 24
[ 0.057417] No NUMA configuration found
[ 0.057418] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.057424] NODE_DATA(0) allocated [mem 0x13fff8000-0x13fffcfff]
[ 0.057492] Zone ranges:
[ 0.057493] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.057495] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.057496] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.057498] Device empty
[ 0.057499] Movable zone start for each node
[ 0.057500] Early memory node ranges
[ 0.057502] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.057503] node 0: [mem 0x0000000000100000-0x00000000bff9ffff]
[ 0.057504] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.057517] Zeroed struct page in unavailable ranges: 194 pages
[ 0.057519] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.057521] On node 0 totalpages: 1048382
[ 0.057523] DMA zone: 64 pages used for memmap
[ 0.057524] DMA zone: 21 pages reserved
[ 0.057525] DMA zone: 3998 pages, LIFO batch:0
[ 0.057702] DMA32 zone: 12223 pages used for memmap
[ 0.057703] DMA32 zone: 782240 pages, LIFO batch:63
[ 0.100921] Normal zone: 4096 pages used for memmap
[ 0.100923] Normal zone: 262144 pages, LIFO batch:63
[ 0.115012] Detected use of extended apic ids on hypertransport bus
[ 0.115123] ACPI: PM-Timer IO Port: 0x908
[ 0.115125] ACPI: Local APIC address 0xfee00000
[ 0.115157] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.115160] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.115162] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.115164] ACPI: IRQ0 used by override.
[ 0.115165] ACPI: IRQ9 used by override.
[ 0.115168] Using ACPI (MADT) for SMP configuration information
[ 0.115172] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.115191] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.115193] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.115194] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.115195] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.115197] PM: Registered nosave memory: [mem 0xbffa0000-0xbffadfff]
[ 0.115198] PM: Registered nosave memory: [mem 0xbffae000-0xbffdffff]
[ 0.115199] PM: Registered nosave memory: [mem 0xbffe0000-0xbfffffff]
[ 0.115200] PM: Registered nosave memory: [mem 0xc0000000-0xff6fffff]
[ 0.115201] PM: Registered nosave memory: [mem 0xff700000-0xffffffff]
[ 0.115204] [mem 0xc0000000-0xff6fffff] available for PCI devices
[ 0.115206] Booting paravirtualized kernel on bare hardware
[ 0.115211] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.284145] random: get_random_bytes called from start_kernel+0x93/0x52a
with crng_init=0
[ 0.284156] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2
nr_node_ids:1
[ 0.285976] percpu: Embedded 45 pages/cpu s144536 r8192 d31592 u1048576
[ 0.285984] pcpu-alloc: s144536 r8192 d31592 u1048576 alloc=1*2097152
[ 0.285986] pcpu-alloc: [0] 0 1
[ 0.286015] Built 1 zonelists, mobility grouping on. Total pages: 1031978
[ 0.286016] Policy zone: Normal
[ 0.286018] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-13-amd64
root=/dev/mapper/system_vg-root_lv ro quiet
[ 0.336459] AGP: Checking aperture...
[ 0.347568] AGP: No AGP bridge found
[ 0.347572] AGP: Node 0: aperture [bus addr 0xb4000000-0xb5ffffff] (32MB)
[ 0.347574] Aperture pointing to e820 RAM. Ignoring.
[ 0.347575] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.347575] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.347576] AGP: This costs you 64MB of RAM
[ 0.347580] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff]
(65536KB)
[ 0.347583] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[ 0.401384] Memory: 3943676K/4193528K available (10252K kernel code, 1242K
rwdata, 3320K rodata, 1596K init, 2264K bss, 249852K reserved, 0K cma-reserved)
[ 0.401583] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.401598] ftrace: allocating 31960 entries in 125 pages
[ 0.421137] rcu: Hierarchical RCU implementation.
[ 0.421140] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.421142] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.426532] NR_IRQS: 33024, nr_irqs: 440, preallocated irqs: 16
[ 0.426878] spurious 8259A interrupt: IRQ7.
[ 0.432241] Console: colour VGA+ 80x25
[ 0.432249] console [tty0] enabled
[ 0.432285] ACPI: Core revision 20180810
[ 0.432439] APIC: Switch to symmetric I/O mode setup
[ 0.433498] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.452438] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.452458] Calibrating delay loop (skipped), value calculated using timer
frequency.. 4410.09 BogoMIPS (lpj=8820192)
[ 0.452462] pid_max: default: 32768 minimum: 301
[ 0.452517] Security Framework initialized
[ 0.452519] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.452552] AppArmor: AppArmor initialized
[ 0.455508] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.457130] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.457209] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.457261] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.457654] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.457655] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.457658] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user
pointer sanitization
[ 0.457660] Spectre V2 : Spectre mitigation: LFENCE not serializing,
switching to generic retpoline
[ 0.457722] Spectre V2 : Mitigation: Full generic retpoline
[ 0.457723] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on
context switch
[ 0.457904] Freeing SMP alternatives memory: 24K
[ 0.568065] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+
(family: 0xf, model: 0x23, stepping: 0x2)
[ 0.568282] Performance Events: AMD PMU driver.
[ 0.568288] ... version: 0
[ 0.568289] ... bit width: 48
[ 0.568289] ... generic registers: 4
[ 0.568290] ... value mask: 0000ffffffffffff
[ 0.568291] ... max period: 00007fffffffffff
[ 0.568291] ... fixed-purpose events: 0
[ 0.568292] ... event mask: 000000000000000f
[ 0.568375] rcu: Hierarchical SRCU implementation.
[ 0.568439] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.568439] smp: Bringing up secondary CPUs ...
[ 0.568439] x86: Booting SMP configuration:
[ 0.568439] .... node #0, CPUs: #1
[ 0.644546] smp: Brought up 1 node, 2 CPUs
[ 0.644546] smpboot: Max logical packages: 1
[ 0.644546] smpboot: Total of 2 processors activated (8820.22 BogoMIPS)
[ 0.645526] devtmpfs: initialized
[ 0.645526] x86/mm: Memory block size: 128MB
[ 0.645526] PM: Registering ACPI NVS region [mem 0xbffae000-0xbffdffff]
(204800 bytes)
[ 0.645526] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.645526] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.645526] pinctrl core: initialized pinctrl subsystem
[ 0.645526] NET: Registered protocol family 16
[ 0.645526] audit: initializing netlink subsys (disabled)
[ 0.645526] audit: type=2000 audit(1607258868.212:1): state=initialized
audit_enabled=0 res=1
[ 0.645526] cpuidle: using governor ladder
[ 0.645526] cpuidle: using governor menu
[ 0.645526] node 0 link 0: io port [1000, ffffff]
[ 0.645526] TOM: 00000000c0000000 aka 3072M
[ 0.645526] node 0 link 0: mmio [e0000000, efffffff]
[ 0.645526] node 0 link 0: mmio [c0000000, dfffffff]
[ 0.645526] node 0 link 0: mmio [a0000, bffff]
[ 0.645526] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.645526] TOM2: 0000000140000000 aka 5120M
[ 0.645526] bus: [bus 00-ff] on node 0 link 0
[ 0.645526] bus: 00 [io 0x0000-0xffff]
[ 0.645526] bus: 00 [mem 0xc0000000-0xffffffff]
[ 0.645526] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.645526] bus: 00 [mem 0x140000000-0xfcffffffff]
[ 0.645526] ACPI: bus type PCI registered
[ 0.645526] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.645526] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.645526] PCI: not using MMCONFIG
[ 0.645526] PCI: Using configuration type 1 for base access
[ 0.649159] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.649159] ACPI: Added _OSI(Module Device)
[ 0.649159] ACPI: Added _OSI(Processor Device)
[ 0.649159] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.649159] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.649159] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.649159] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.654386] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.656718] ACPI: Interpreter enabled
[ 0.656749] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.656750] ACPI: Using IOAPIC for interrupt routing
[ 0.657131] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.659134] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI
motherboard resources
[ 0.659143] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a
huge-page mapping due to MTRR override.
[ 0.659826] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.660467] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.669956] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.669963] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM
Segments MSI]
[ 0.669969] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.670287] PCI host bridge to bus 0000:00
[ 0.670290] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.670291] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.670293] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff
window]
[ 0.670295] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff
window]
[ 0.670296] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfff7ffff
window]
[ 0.670298] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.670310] pci 0000:00:00.0: [1002:5952] type 00 class 0x060000
[ 0.670435] pci 0000:00:02.0: [1002:5a34] type 01 class 0x060400
[ 0.670459] pci 0000:00:02.0: enabling Extended Tags
[ 0.670489] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.670612] pci 0000:00:06.0: [1002:5a38] type 01 class 0x060400
[ 0.670635] pci 0000:00:06.0: enabling Extended Tags
[ 0.670664] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.670799] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.670901] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.670995] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.671090] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.671191] pci 0000:00:1a.0: [10b9:5249] type 01 class 0x060400
[ 0.671345] pci 0000:00:1c.0: [10b9:5237] type 00 class 0x0c0310
[ 0.671363] pci 0000:00:1c.0: reg 0x10: [mem 0xddcfc000-0xddcfcfff]
[ 0.671510] pci 0000:00:1c.1: [10b9:5237] type 00 class 0x0c0310
[ 0.671528] pci 0000:00:1c.1: reg 0x10: [mem 0xddcfd000-0xddcfdfff]
[ 0.671677] pci 0000:00:1c.2: [10b9:5237] type 00 class 0x0c0310
[ 0.671695] pci 0000:00:1c.2: reg 0x10: [mem 0xddcfe000-0xddcfefff]
[ 0.671844] pci 0000:00:1c.3: [10b9:5239] type 00 class 0x0c0320
[ 0.671865] pci 0000:00:1c.3: reg 0x10: [mem 0xddcff800-0xddcff8ff]
[ 0.671950] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.672067] pci 0000:00:1e.0: [10b9:1575] type 00 class 0x060100
[ 0.672244] pci 0000:00:1e.1: [10b9:7101] type 00 class 0x068000
[ 0.672314] pci 0000:00:1e.1: quirk: [io 0x0900-0x093f] claimed by ali7101
ACPI
[ 0.672425] pci 0000:00:1f.0: [10b9:5229] type 00 class 0x0101fa
[ 0.672480] pci 0000:00:1f.0: reg 0x20: [io 0xff00-0xff0f]
[ 0.672500] pci 0000:00:1f.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.672502] pci 0000:00:1f.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.672503] pci 0000:00:1f.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.672504] pci 0000:00:1f.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.672631] pci 0000:00:1f.1: [10b9:5288] type 00 class 0x010601
[ 0.672652] pci 0000:00:1f.1: reg 0x10: [io 0xcc00-0xcc0f]
[ 0.672661] pci 0000:00:1f.1: reg 0x14: [io 0xc880-0xc887]
[ 0.672670] pci 0000:00:1f.1: reg 0x18: [io 0xc800-0xc80f]
[ 0.672680] pci 0000:00:1f.1: reg 0x1c: [io 0xc480-0xc487]
[ 0.672689] pci 0000:00:1f.1: reg 0x20: [io 0xc400-0xc41f]
[ 0.672699] pci 0000:00:1f.1: reg 0x24: [mem 0xddcffc00-0xddcfffff]
[ 0.672741] pci 0000:00:1f.1: PME# supported from D3hot
[ 0.672889] pci 0000:03:00.0: [10de:01df] type 00 class 0x030000
[ 0.672905] pci 0000:03:00.0: reg 0x10: [mem 0xdf000000-0xdfffffff]
[ 0.672916] pci 0000:03:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit
pref]
[ 0.672927] pci 0000:03:00.0: reg 0x1c: [mem 0xde000000-0xdeffffff 64bit]
[ 0.672939] pci 0000:03:00.0: reg 0x30: [mem 0xddfe0000-0xddffffff pref]
[ 0.673384] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You
can enable it with 'pcie_aspm=force'
[ 0.673391] pci 0000:00:02.0: PCI bridge to [bus 03]
[ 0.673396] pci 0000:00:02.0: bridge window [mem 0xddf00000-0xdfffffff]
[ 0.673399] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff
64bit pref]
[ 0.673454] pci 0000:02:00.0: [11ab:4362] type 00 class 0x020000
[ 0.673486] pci 0000:02:00.0: reg 0x10: [mem 0xddefc000-0xddefffff 64bit]
[ 0.673497] pci 0000:02:00.0: reg 0x18: [io 0xe800-0xe8ff]
[ 0.673538] pci 0000:02:00.0: reg 0x30: [mem 0xddec0000-0xddedffff pref]
[ 0.673607] pci 0000:02:00.0: supports D1 D2
[ 0.673609] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.673691] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You
can enable it with 'pcie_aspm=force'
[ 0.673699] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.673702] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
[ 0.673705] pci 0000:00:06.0: bridge window [mem 0xdde00000-0xddefffff]
[ 0.673726] pci_bus 0000:01: extended config space not accessible
[ 0.673779] pci 0000:01:11.0: [9004:5078] type 00 class 0x010000
[ 0.673800] pci 0000:01:11.0: reg 0x10: [io 0xd400-0xd4ff]
[ 0.673812] pci 0000:01:11.0: reg 0x14: [mem 0xdddfb000-0xdddfbfff]
[ 0.673863] pci 0000:01:11.0: reg 0x30: [mem 0xddde0000-0xdddeffff pref]
[ 0.673957] pci 0000:01:14.0: [11ab:4320] type 00 class 0x020000
[ 0.673979] pci 0000:01:14.0: reg 0x10: [mem 0xdddfc000-0xdddfffff]
[ 0.673990] pci 0000:01:14.0: reg 0x14: [io 0xd800-0xd8ff]
[ 0.674042] pci 0000:01:14.0: reg 0x30: [mem 0xdddc0000-0xddddffff pref]
[ 0.674086] pci 0000:01:14.0: supports D1 D2
[ 0.674087] pci 0000:01:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.674157] pci 0000:00:1a.0: PCI bridge to [bus 01]
[ 0.674161] pci 0000:00:1a.0: bridge window [io 0xd000-0xdfff]
[ 0.674164] pci 0000:00:1a.0: bridge window [mem 0xddd00000-0xdddfffff]
[ 0.675880] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14
*15), disabled.
[ 0.676000] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.676119] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.676237] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.676353] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14
15), disabled.
[ 0.676479] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.676597] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14
15), disabled.
[ 0.676715] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14
15), disabled.
[ 0.676836] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.677035] pci 0000:03:00.0: vgaarb: setting as boot VGA device
[ 0.677035] pci 0000:03:00.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[ 0.677035] pci 0000:03:00.0: vgaarb: bridge control possible
[ 0.677035] vgaarb: loaded
[ 0.677035] pps_core: LinuxPPS API ver. 1 registered
[ 0.677035] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giome...@linux.it>
[ 0.677035] PTP clock support registered
[ 0.677035] EDAC MC: Ver: 3.0.0
[ 0.677035] PCI: Using ACPI for IRQ routing
[ 0.688873] PCI: pci_cache_line_size set to 64 bytes
[ 0.688929] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[ 0.688930] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.688933] e820: reserve RAM buffer [mem 0xbffa0000-0xbfffffff]
[ 0.689098] clocksource: Switched to clocksource refined-jiffies
[ 0.708729] VFS: Disk quotas dquot_6.6.0
[ 0.708760] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.708968] AppArmor: AppArmor Filesystem Enabled
[ 0.709001] pnp: PnP ACPI init
[ 0.709142] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.709796] pnp 00:01: [dma 2]
[ 0.709851] pnp 00:01: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.710655] pnp 00:02: [dma 3]
[ 0.710928] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.711579] pnp 00:03: disabling [io 0x0900-0x091f] because it overlaps
0000:00:1e.1 BAR 13 [io 0x0900-0x093f]
[ 0.711644] system 00:03: [io 0x028d-0x028e] has been reserved
[ 0.711646] system 00:03: [io 0x0480-0x048f] has been reserved
[ 0.711648] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.711650] system 00:03: [io 0x0900-0x09bf] could not be reserved
[ 0.711652] system 00:03: [io 0x09c0-0x09df] has been reserved
[ 0.711655] system 00:03: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.711661] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.711824] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.711826] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.711831] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.712371] pnp 00:05: [dma 0 disabled]
[ 0.712480] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.712732] system 00:06: [io 0x0c00-0x0c0f] has been reserved
[ 0.712734] system 00:06: [io 0x0d00-0x0d0f] has been reserved
[ 0.712736] system 00:06: [io 0x0a20-0x0a2f] has been reserved
[ 0.712738] system 00:06: [io 0x0a30-0x0a3f] has been reserved
[ 0.712742] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.712827] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.712831] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.713039] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.713041] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.713043] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.713045] system 00:08: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.713046] system 00:08: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.713051] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.713241] pnp: PnP ACPI: found 9 devices
[ 0.720167] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff,
max_idle_ns: 2085701024 ns
[ 0.720185] clocksource: Switched to clocksource acpi_pm
[ 0.720203] pci 0000:00:02.0: PCI bridge to [bus 03]
[ 0.720207] pci 0000:00:02.0: bridge window [mem 0xddf00000-0xdfffffff]
[ 0.720210] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff
64bit pref]
[ 0.720213] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.720216] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
[ 0.720219] pci 0000:00:06.0: bridge window [mem 0xdde00000-0xddefffff]
[ 0.720224] pci 0000:00:1a.0: PCI bridge to [bus 01]
[ 0.720227] pci 0000:00:1a.0: bridge window [io 0xd000-0xdfff]
[ 0.720231] pci 0000:00:1a.0: bridge window [mem 0xddd00000-0xdddfffff]
[ 0.720240] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.720242] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.720243] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.720245] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.720246] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfff7ffff window]
[ 0.720248] pci_bus 0000:03: resource 1 [mem 0xddf00000-0xdfffffff]
[ 0.720250] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xcfffffff 64bit
pref]
[ 0.720252] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.720253] pci_bus 0000:02: resource 1 [mem 0xdde00000-0xddefffff]
[ 0.720255] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.720257] pci_bus 0000:01: resource 1 [mem 0xddd00000-0xdddfffff]
[ 0.720360] NET: Registered protocol family 2
[ 0.720360] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3,
32768 bytes)
[ 0.720360] TCP established hash table entries: 32768 (order: 6, 262144
bytes)
[ 0.720360] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.720360] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.720360] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.720360] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.720360] NET: Registered protocol family 1
[ 0.720360] NET: Registered protocol family 44
[ 0.720360] PCI: CLS mismatch (64 != 512), using 64 bytes
[ 0.720360] pci 0000:03:00.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
[ 0.720360] Unpacking initramfs...
[ 1.407011] Freeing initrd memory: 27588K
[ 1.407353] PCI-DMA: Disabling AGP.
[ 1.407485] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 1.407486] PCI-DMA: using GART IOMMU.
[ 1.407489] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.413157] Initialise system trusted keyrings
[ 1.413174] Key type blacklist registered
[ 1.413296] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 1.415695] zbud: loaded
[ 1.678154] Key type asymmetric registered
[ 1.678158] Asymmetric key parser 'x509' registered
[ 1.678181] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
247)
[ 1.678248] io scheduler noop registered
[ 1.678250] io scheduler deadline registered
[ 1.678337] io scheduler cfq registered (default)
[ 1.678338] io scheduler mq-deadline registered
[ 1.678829] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.679851] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.700519] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a
16550A
[ 1.701109] Linux agpgart interface v0.103
[ 1.701152] AMD IOMMUv2 driver by Joerg Roedel <jroe...@suse.de>
[ 1.701153] AMD IOMMUv2 functionality not available on this system
[ 1.701427] i8042: PNP: No PS/2 controller found.
[ 1.701428] i8042: Probing ports directly.
[ 1.703922] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.703928] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.704101] mousedev: PS/2 mouse device common for all mice
[ 1.704162] rtc_cmos 00:00: RTC can wake from S4
[ 1.704334] rtc_cmos 00:00: registered as rtc0
[ 1.704359] rtc_cmos 00:00: alarms up to one month, 114 bytes nvram
[ 1.704400] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.705200] NET: Registered protocol family 10
[ 1.718771] Segment Routing with IPv6
[ 1.718808] mip6: Mobile IPv6
[ 1.718814] NET: Registered protocol family 17
[ 1.718893] mpls_gso: MPLS GSO support
[ 1.719092] mce: Using 5 MCE banks
[ 1.719349] registered taskstats version 1
[ 1.719350] Loading compiled-in X.509 certificates
[ 1.779393] Loaded X.509 cert 'Debian Secure Boot CA:
6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.779413] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
[ 1.779446] zswap: loaded using pool lzo/zbud
[ 1.779551] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.780087] rtc_cmos 00:00: setting system clock to 2020-12-06 12:47:49 UTC
(1607258869)
[ 1.780127] Unstable clock detected, switching default tracing clock to
"global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 1.783453] Freeing unused kernel image memory: 1596K
[ 1.800486] Write protecting the kernel read-only data: 16384k
[ 1.802361] Freeing unused kernel image memory: 2028K
[ 1.802996] Freeing unused kernel image memory: 776K
[ 1.818600] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.818604] Run /init as init process
[ 1.929644] skge: 1.14 addr 0xdddfc000 irq 21 chip Yukon-Lite rev 9
[ 1.929926] skge 0000:01:14.0 eth0: addr 00:17:31:9a:c6:f5
[ 1.949346] ali1535_smbus 0000:00:1e.1: enabling device (0000 -> 0001)
[ 1.949356] ali1535_smbus 0000:00:1e.1: ALI1535_smb region uninitialized -
upgrade BIOS?
[ 1.949357] ali1535_smbus 0000:00:1e.1: ALI1535 not detected, module not
inserted.
[ 1.950494] ali15x3_smbus 0000:00:1e.1: ALI15X3_smb region uninitialized -
upgrade BIOS or use force_addr=0xaddr
[ 1.950556] ali15x3_smbus 0000:00:1e.1: ALI15X3 not detected, module not
inserted.
[ 1.953948] sky2: driver version 1.30
[ 1.956665] sky2 0000:02:00.0: Yukon-2 EC chip revision 2
[ 1.957156] sky2 0000:02:00.0 eth1: addr 00:17:31:9a:c9:b1
[ 1.980704] FDC 0 is a post-1991 82077
[ 1.991748] ACPI: bus type USB registered
[ 1.991785] usbcore: registered new interface driver usbfs
[ 1.991800] usbcore: registered new interface driver hub
[ 1.992999] SCSI subsystem initialized
[ 2.011402] usbcore: registered new device driver usb
[ 2.030064] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.034585] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.036100] ehci-pci: EHCI PCI platform driver
[ 2.039434] ehci-pci 0000:00:1c.3: EHCI Host Controller
[ 2.039446] ehci-pci 0000:00:1c.3: new USB bus registered, assigned bus
number 1
[ 2.039462] ehci-pci 0000:00:1c.3: debug port 1
[ 2.039541] ehci-pci 0000:00:1c.3: irq 23, io mem 0xddcff800
[ 2.049648] libata version 3.00 loaded.
[ 2.057739] skge 0000:01:14.0 enp1s20: renamed from eth0
[ 2.061441] ehci-pci 0000:00:1c.3: USB 2.0 started, EHCI 1.00
[ 2.061544] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 4.19
[ 2.061546] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.061548] usb usb1: Product: EHCI Host Controller
[ 2.061549] usb usb1: Manufacturer: Linux 4.19.0-13-amd64 ehci_hcd
[ 2.061550] usb usb1: SerialNumber: 0000:00:1c.3
[ 2.061771] hub 1-0:1.0: USB hub found
[ 2.061781] hub 1-0:1.0: 8 ports detected
[ 2.063353] ohci-pci: OHCI PCI platform driver
[ 2.063729] ahci 0000:00:1f.1: version 3.0
[ 2.063976] ahci 0000:00:1f.1: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf
impl SATA mode
[ 2.063979] ahci 0000:00:1f.1: flags: ncq sntf ilck pm led clo pmp pio slum
part
[ 2.065025] ohci-pci 0000:00:1c.0: OHCI PCI host controller
[ 2.065039] ohci-pci 0000:00:1c.0: new USB bus registered, assigned bus
number 2
[ 2.065094] ohci-pci 0000:00:1c.0: irq 17, io mem 0xddcfc000
[ 2.065141] scsi host1: ahci
[ 2.067172] scsi host2: ahci
[ 2.067415] scsi host4: ahci
[ 2.067665] scsi host5: ahci
[ 2.067841] ata1: SATA max UDMA/133 abar m1024@0xddcffc00 port 0xddcffd00
irq 25
[ 2.067844] ata2: SATA max UDMA/133 abar m1024@0xddcffc00 port 0xddcffd80
irq 25
[ 2.067846] ata3: SATA max UDMA/133 abar m1024@0xddcffc00 port 0xddcffe00
irq 25
[ 2.067848] ata4: SATA max UDMA/133 abar m1024@0xddcffc00 port 0xddcffe80
irq 25
[ 2.076151] scsi host3: pata_ali
[ 2.078135] sky2 0000:02:00.0 enp2s0: renamed from eth1
[ 2.079541] scsi host6: pata_ali
[ 2.079677] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 2.079679] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 2.126524] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 4.19
[ 2.126528] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.126530] usb usb2: Product: OHCI PCI host controller
[ 2.126531] usb usb2: Manufacturer: Linux 4.19.0-13-amd64 ohci_hcd
[ 2.126532] usb usb2: SerialNumber: 0000:00:1c.0
[ 2.126752] hub 2-0:1.0: USB hub found
[ 2.126763] hub 2-0:1.0: 3 ports detected
[ 2.127083] ohci-pci 0000:00:1c.1: OHCI PCI host controller
[ 2.127091] ohci-pci 0000:00:1c.1: new USB bus registered, assigned bus
number 3
[ 2.127121] ohci-pci 0000:00:1c.1: irq 18, io mem 0xddcfd000
[ 2.186496] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 4.19
[ 2.186498] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.186500] usb usb3: Product: OHCI PCI host controller
[ 2.186501] usb usb3: Manufacturer: Linux 4.19.0-13-amd64 ohci_hcd
[ 2.186502] usb usb3: SerialNumber: 0000:00:1c.1
[ 2.186651] hub 3-0:1.0: USB hub found
[ 2.186660] hub 3-0:1.0: 3 ports detected
[ 2.186866] ohci-pci 0000:00:1c.2: OHCI PCI host controller
[ 2.186872] ohci-pci 0000:00:1c.2: new USB bus registered, assigned bus
number 4
[ 2.186907] ohci-pci 0000:00:1c.2: irq 19, io mem 0xddcfe000
[ 2.246494] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 4.19
[ 2.246495] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.246497] usb usb4: Product: OHCI PCI host controller
[ 2.246498] usb usb4: Manufacturer: Linux 4.19.0-13-amd64 ohci_hcd
[ 2.246499] usb usb4: SerialNumber: 0000:00:1c.2
[ 2.246651] hub 4-0:1.0: USB hub found
[ 2.246659] hub 4-0:1.0: 3 ports detected
[ 2.383036] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.383078] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.544476] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.544505] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.544627] ata1.00: ATA-11: TOSHIBA-TR200, SBFA15.3, max UDMA/133
[ 2.544629] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.544873] ata1.00: configured for UDMA/133
[ 2.545206] scsi 1:0:0:0: Direct-Access ATA TOSHIBA-TR200 15.3
PQ: 0 ANSI: 5
[ 2.546521] ata3.00: ATA-8: WDC WD10EALX-009BA0, 15.01H15, max UDMA/133
[ 2.546523] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.549373] ata3.00: configured for UDMA/133
[ 2.550019] scsi 4:0:0:0: Direct-Access ATA WDC WD10EALX-009 1H15
PQ: 0 ANSI: 5
[ 2.550822] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00
TB/932 GiB)
[ 2.550828] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224
GiB)
[ 2.550838] sd 4:0:0:0: [sdb] Write Protect is off
[ 2.550840] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.550844] sd 1:0:0:0: [sda] Write Protect is off
[ 2.550847] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.550866] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.550870] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.552005] sda: sda1 sda2 sda3
[ 2.552543] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.570440] sdb: sdb1
[ 2.570772] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 17.296478] scsi host0: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec 2902/04/10/15/20C/30C SCSI adapter>
aic7850: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
[ 17.322096] random: lvm: uninitialized urandom read (4 bytes read)
[ 17.361647] device-mapper: uevent: version 1.0.3
[ 17.362190] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised:
dm-de...@redhat.com
[ 17.363988] random: lvm: uninitialized urandom read (2 bytes read)
[ 17.446524] PM: Image not found (code -22)
[ 17.612914] SGI XFS with ACLs, security attributes, realtime, no debug
enabled
[ 17.616395] XFS (dm-0): Mounting V5 Filesystem
[ 17.648827] random: fast init done
[ 17.682335] XFS (dm-0): Ending clean mount
[ 18.723509] random: lvm: uninitialized urandom read (4 bytes read)
[ 18.754236] random: lvm: uninitialized urandom read (2 bytes read)
[ 18.832880] XFS (dm-1): Mounting V5 Filesystem
[ 18.985865] XFS (dm-1): Ending clean mount
[ 19.191840] systemd[1]: Inserted module 'autofs4'
[ 19.214916] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS
+ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2
default-hierarchy=hybrid)
[ 19.215069] systemd[1]: Detected architecture x86-64.
[ 19.217896] systemd[1]: Set hostname to <eneri>.
[ 19.355658] random: lvmconfig: uninitialized urandom read (4 bytes read)
[ 19.506086] systemd[1]: /lib/systemd/system/memcached.service:13: PIDFile=
references path below legacy directory /var/run/, updating
/var/run/memcached/memcached.pid → /run/memcached/memcached.pid; please update
the unit file accordingly.
[ 19.506461] systemd[1]: /lib/systemd/system/mailman.service:6: PIDFile=
references path below legacy directory /var/run/, updating
/var/run/mailman/mailman.pid → /run/mailman/mailman.pid; please update the unit
file accordingly.
[ 19.512228] systemd[1]: /lib/systemd/system/fail2ban.service:12: PIDFile=
references path below legacy directory /var/run/, updating
/var/run/fail2ban/fail2ban.pid → /run/fail2ban/fail2ban.pid; please update the
unit file accordingly.
[ 19.512949] systemd[1]: /lib/systemd/system/dovecot.service:9: PIDFile=
references path below legacy directory /var/run/, updating
/var/run/dovecot/master.pid → /run/dovecot/master.pid; please update the unit
file accordingly.
[ 19.518210] systemd[1]: /lib/systemd/system/apcupsd.service:10: PIDFile=
references path below legacy directory /var/run/, updating /var/run/apcupsd.pid
→ /run/apcupsd.pid; please update the unit file accordingly.
[ 19.527089] systemd[1]: usr.mount: Unit is bound to inactive unit
dev-mapper-system_vg\x2dusr_lv.device. Stopping, too.
[ 19.531310] systemd[1]: Listening on LVM2 poll daemon socket.
[ 19.710912] lp: driver loaded but no devices found
[ 19.734090] ppdev: user-space parallel port driver
[ 19.737941] parport_pc 00:02: reported by Plug and Play ACPI
[ 19.738036] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 19.836682] lp0: using parport0 (interrupt-driven).
[ 19.990301] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 19.990320] ACPI: Power Button [PWRB]
[ 19.990406] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 19.990426] ACPI: Power Button [PWRF]
[ 20.068295] k8temp 0000:00:18.3: hwmon_device_register() is deprecated.
Please convert the driver to use hwmon_device_register_with_info().
[ 20.100917] alim7101_wdt: Steve Hill <st...@navaho.co.uk>
[ 20.100933] alim7101_wdt: ALi 1543 South-Bridge not present - WDT not set
[ 20.136766] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 20.152635] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 20.152915] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 20.174593] MCE: In-kernel MCE decoding enabled.
[ 20.178929] EDAC amd64: Node 0: DRAM ECC enabled.
[ 20.178932] EDAC amd64: K8 revE or earlier detected (node 0).
[ 20.178952] EDAC amd64: using x4 syndromes.
[ 20.179211] EDAC MC0: Giving out device to module amd64_edac controller K8:
DEV 0000:00:18.3 (INTERRUPT)
[ 20.179229] EDAC PCI0: Giving out device to module amd64_edac controller
EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[ 20.179230] AMD64 EDAC driver v3.5.0
[ 20.190205] powernow_k8: fid 0xe (2200 MHz), vid 0x8
[ 20.190208] powernow_k8: fid 0xc (2000 MHz), vid 0xa
[ 20.190209] powernow_k8: fid 0xa (1800 MHz), vid 0xc
[ 20.190210] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
[ 20.190937] powernow_k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor
4400+ (2 cpu cores) (version 2.20.00)
[ 20.746318] nouveau 0000:03:00.0: NVIDIA G72 (046f00a3)
[ 20.828249] Adding 9765884k swap on /dev/sda2. Priority:-2 extents:1
across:9765884k SSDsFS
[ 20.978436] nouveau 0000:03:00.0: bios: version 05.72.22.34.00
[ 20.987218] nouveau 0000:03:00.0: fb: 256 MiB DDR2
[ 21.045248] [TTM] Zone kernel: Available graphics memory: 2020820 kiB
[ 21.045251] [TTM] Initializing pool allocator
[ 21.045257] [TTM] Initializing DMA pool allocator
[ 21.045286] nouveau 0000:03:00.0: DRM: VRAM: 252 MiB
[ 21.045288] nouveau 0000:03:00.0: DRM: GART: 512 MiB
[ 21.045293] nouveau 0000:03:00.0: DRM: TMDS table version 1.1
[ 21.045295] nouveau 0000:03:00.0: DRM: DCB version 3.0
[ 21.045298] nouveau 0000:03:00.0: DRM: DCB outp 00: 01000300 00000028
[ 21.045301] nouveau 0000:03:00.0: DRM: DCB outp 01: 02011310 00000028
[ 21.045303] nouveau 0000:03:00.0: DRM: DCB outp 02: 01011312 00000000
[ 21.045305] nouveau 0000:03:00.0: DRM: DCB outp 03: 020223f1 00c0c083
[ 21.045306] nouveau 0000:03:00.0: DRM: DCB conn 00: 0000
[ 21.045308] nouveau 0000:03:00.0: DRM: DCB conn 01: 2130
[ 21.045310] nouveau 0000:03:00.0: DRM: DCB conn 02: 0210
[ 21.045311] nouveau 0000:03:00.0: DRM: DCB conn 03: 0211
[ 21.045313] nouveau 0000:03:00.0: DRM: DCB conn 04: 0213
[ 21.045683] nouveau 0000:03:00.0: DRM: Saving VGA fonts
[ 21.147518] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 21.147521] [drm] Driver supports precise vblank timestamp query.
[ 21.151470] nouveau 0000:03:00.0: DRM: MM: using M2MF for buffer copies
[ 21.151489] nouveau 0000:03:00.0: DRM: Setting dpms mode 3 on TV encoder
(output 3)
[ 21.156395] cryptd: max_cpu_qlen set to 1000
[ 21.217610] XFS (dm-2): Mounting V5 Filesystem
[ 21.272829] [drm] Cannot find any crtc or sizes
[ 21.272878] [drm] Initialized nouveau 1.3.1 20120801 for 0000:03:00.0 on
minor 0
[ 21.379920] XFS (dm-3): Mounting V5 Filesystem
[ 21.380117] XFS (dm-4): Mounting V5 Filesystem
[ 21.397668] [drm] Cannot find any crtc or sizes
[ 21.436131] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
(null)
[ 21.492573] XFS (dm-4): Ending clean mount
[ 21.492916] XFS (dm-3): Ending clean mount
[ 21.493144] XFS (dm-2): Ending clean mount
[ 21.520530] [drm] Cannot find any crtc or sizes
[ 21.531629] XFS (dm-7): Mounting V5 Filesystem
[ 21.554261] XFS (dm-8): Mounting V5 Filesystem
[ 21.555043] XFS (dm-6): Mounting V5 Filesystem
[ 21.578153] systemd-journald[239]: Received request to flush runtime journal
from PID 1
[ 21.595472] XFS (dm-5): Mounting V5 Filesystem
[ 21.595548] XFS (dm-9): Mounting V5 Filesystem
[ 21.617035] XFS (dm-8): Ending clean mount
[ 21.651043] XFS (dm-6): Ending clean mount
[ 21.675599] XFS (dm-5): Ending clean mount
[ 21.757681] XFS (dm-7): Ending clean mount
[ 21.861022] random: crng init done
[ 21.861028] random: 5 urandom warning(s) missed due to ratelimiting
[ 21.924523] XFS (dm-9): Ending clean mount
[ 22.016272] audit: type=1400 audit(1607258889.731:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=550
comm="apparmor_parser"
[ 22.016283] audit: type=1400 audit(1607258889.731:3): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod"
pid=550 comm="apparmor_parser"
[ 22.018447] audit: type=1400 audit(1607258889.735:4): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=551
comm="apparmor_parser"
[ 22.018451] audit: type=1400 audit(1607258889.735:5): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_filter" pid=551
comm="apparmor_parser"
[ 22.018454] audit: type=1400 audit(1607258889.735:6): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_groff" pid=551
comm="apparmor_parser"
[ 22.025213] audit: type=1400 audit(1607258889.743:7): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=552
comm="apparmor_parser"
[ 22.026254] audit: type=1400 audit(1607258889.743:8): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=554
comm="apparmor_parser"
[ 22.030230] audit: type=1400 audit(1607258889.747:9): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/sbin/clamd" pid=555
comm="apparmor_parser"
[ 22.031663] audit: type=1400 audit(1607258889.747:10): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/sbin/named" pid=556
comm="apparmor_parser"
[ 22.033568] audit: type=1400 audit(1607258889.751:11): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=557
comm="apparmor_parser"
[ 22.457604] sky2 0000:02:00.0 enp2s0: enabling interface
[ 22.907613] skge 0000:01:14.0 enp1s20: enabling interface
[ 23.008881] PPP generic driver version 2.4.2
[ 23.088545] NET: Registered protocol family 24
[ 24.799374] sky2 0000:02:00.0 enp2s0: Link is up at 1000 Mbps, full duplex,
flow control both
[ 25.321707] skge 0000:01:14.0 enp1s20: Link is up at 1000 Mbps, full duplex,
flow control both
[ 134.770702] nf_conntrack: default automatic helper assignment has been
turned off for security reasons and CT-based firewall rule not found. Use the
iptables CT target to attach helpers instead.
[ 466.200501] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 466.203337] ata3.00: configured for UDMA/133
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0701
board_vendor: ASUSTeK Computer INC.
board_name: A8R32-MVP Deluxe
board_version: Rev 1.xx
** Loaded modules:
nft_chain_route_ipv4
xt_TCPMSS
xt_tcpmss
pppoe
pppox
ppp_generic
slhc
ip6t_REJECT
nf_reject_ipv6
xt_hl
ip6_tables
ip6t_rt
ipt_REJECT
nf_reject_ipv4
xt_multiport
ext4
nft_limit
xt_limit
xt_addrtype
crc16
mbcache
jbd2
nft_chain_nat_ipv4
fscrypto
ecb
ipt_MASQUERADE
nf_nat_ipv4
crypto_simd
cryptd
glue_helper
xt_nat
aes_x86_64
xt_tcpudp
nouveau
xt_conntrack
mxm_wmi
wmi
video
nft_compat
ttm
drm_kms_helper
evdev
nft_counter
drm
powernow_k8
amd64_edac_mod
edac_mce_amd
sg
serio_raw
pcspkr
nf_conntrack_sane
i2c_algo_bit
k8temp
asus_atk0110
nf_conntrack_netbios_ns
button
nf_conntrack_broadcast
nf_nat_ftp
nf_nat
firewire_sbp2
firewire_core
crc_itu_t
nf_conntrack_ftp
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
nf_tables
parport_pc
nfnetlink
ppdev
lp
parport
ip_tables
x_tables
autofs4
xfs
libcrc32c
crc32c_generic
dm_mod
sd_mod
ata_generic
pata_ali
ohci_pci
ahci
libahci
libata
aic7xxx
ehci_pci
ohci_hcd
ehci_hcd
scsi_transport_spi
usbcore
scsi_mod
psmouse
sky2
i2c_ali15x3
i2c_ali1535
usb_common
skge
floppy
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RD580 Host
Bridge [1002:5952]
Subsystem: ASUSTeK Computer Inc. RD580 Host Bridge [1043:8194]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
NUMA node: 0
00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RS4xx PCI
Express Port [ext gfx] [1002:5a34] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
NUMA node: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: ddf00000-dfffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RC4xx/RS4xx
PCI Express Port 3 [1002:5a38] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
NUMA node: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: dde00000-ddefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8
[Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8
[Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8
[Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Kernel driver in use: k8temp
Kernel modules: k8temp
00:1a.0 PCI bridge [0604]: ULi Electronics Inc. M5249 HTT to PCI Bridge
[10b9:5249] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
NUMA node: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: ddd00000-dddfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1c.0 USB controller [0c03]: ULi Electronics Inc. USB 1.1 Controller
[10b9:5237] (rev 03) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. USB 1.1 Controller [1043:8056]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
NUMA node: 0
Region 0: Memory at ddcfc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:1c.1 USB controller [0c03]: ULi Electronics Inc. USB 1.1 Controller
[10b9:5237] (rev 03) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. USB 1.1 Controller [1043:8056]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
NUMA node: 0
Region 0: Memory at ddcfd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:1c.2 USB controller [0c03]: ULi Electronics Inc. USB 1.1 Controller
[10b9:5237] (rev 03) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. USB 1.1 Controller [1043:8056]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 19
NUMA node: 0
Region 0: Memory at ddcfe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:1c.3 USB controller [0c03]: ULi Electronics Inc. USB 2.0 Controller
[10b9:5239] (rev 01) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. USB 2.0 Controller [1043:8056]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (4000ns min, 8000ns max), Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 23
NUMA node: 0
Region 0: Memory at ddcff800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 ISA bridge [0601]: ULi Electronics Inc. M1575 South Bridge [10b9:1575]
Subsystem: ULi Electronics Inc. M1575 South Bridge [10b9:1575]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 6000ns max)
NUMA node: 0
00:1e.1 Bridge [0680]: ULi Electronics Inc. M7101 Power Management Controller
[PMU] [10b9:7101]
Subsystem: ASUSTeK Computer Inc. M7101 Power Management Controller
[PMU] [1043:8056]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Kernel modules: i2c_ali1535, i2c_ali15x3, alim7101_wdt
00:1f.0 IDE interface [0101]: ULi Electronics Inc. M5229 IDE [10b9:5229] (rev
c8) (prog-if fa)
Subsystem: ASUSTeK Computer Inc. M5229 IDE [1043:8056]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 19
NUMA node: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
Region 4: I/O ports at ff00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_ali
Kernel modules: pata_ali, ata_generic
00:1f.1 SATA controller [0106]: ULi Electronics Inc. ULi M5288 SATA [10b9:5288]
(rev 10) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. A8R-MVP Mainboard [1043:8056]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128, Cache Line Size: 512 bytes
Interrupt: pin A routed to IRQ 25
NUMA node: 0
Region 0: I/O ports at cc00 [size=16]
Region 1: I/O ports at c880 [size=8]
Region 2: I/O ports at c800 [size=16]
Region 3: I/O ports at c480 [size=8]
Region 4: I/O ports at c400 [size=32]
Region 5: Memory at ddcffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
01:11.0 SCSI storage controller [0100]: Adaptec AIC-7850T/7856T [AVA-2902/4/6 /
AHA-2910] [9004:5078] (rev 03)
Subsystem: Adaptec AIC-7850T/7856T [AVA-290x / AHA-2910] [9004:7850]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1000ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
NUMA node: 0
Region 0: I/O ports at d400 [disabled] [size=256]
Region 1: Memory at dddfb000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at ddde0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: aic7xxx
Kernel modules: aic7xxx
01:14.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001
Gigabit Ethernet Controller [11ab:4320] (rev 14)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet
Controller (Asus) [1043:811a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
NUMA node: 0
Region 0: Memory at dddfc000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at d800 [size=256]
Expansion ROM at dddc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: skge
Kernel modules: skge
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E
Gigabit Ethernet Controller [11ab:4362] (rev 20)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8053 Gigabit Ethernet
controller PCIe (Asus) [1043:8142]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
NUMA node: 0
Region 0: Memory at ddefc000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at e800 [size=256]
Expansion ROM at ddec0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
Kernel modules: sky2
03:00.0 VGA compatible controller [0300]: NVIDIA Corporation G72 [GeForce 7300
GS] [10de:01df] (rev a1) (prog-if 00 [VGA controller])
Subsystem: CardExpert Technology G72 [GeForce 7300 GS] [10b0:0401]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
NUMA node: 0
Region 0: Memory at df000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at de000000 (64-bit, non-prefetchable) [size=16M]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nouveau
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 10.7
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.19.0-13-amd64 (SMP w/2 CPU cores)
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8),
LANGUAGE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/bash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-13-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133+deb10u1
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-4.19.0-13-amd64 recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
Versions of packages linux-image-4.19.0-13-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02+dfsg1-20+deb10u2
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-13-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---
