Package: src:linux Version: 4.19.118-2+deb10u1 Severity: normal Dear Maintainer,
My ASUS Transformer TA102 needs CONFIG_BACKLIGHT_PWM enabled to be able to turn down the screen backlight. Reducing the backlight is critical to extend battery life, so I having the option enabled in the default Debian kernel would lead to improving the battery life in this computer (and similar ones, I imagine). I can compile my own kernel, but it would be much nicer if the option were enabled by default in the distribution kernel, since it does not seem to impact anything negatively in terms of stability or performance. -- Package-specific info: ** Version: Linux version 4.19.0-9-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.118-2+deb10u1 (2020-06-07) ** Command line: BOOT_IMAGE=/vmlinuz-4.19.0-9-amd64 root=/dev/mapper/eMMC-Root ro fbcon=rotate:1 quiet ** Not tainted ** Kernel log: [ 10.532244] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002) [ 10.535074] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 10.580628] hid-multitouch 0003:0B05:183B.0003: input,hiddev1,hidraw2: USB HID v1.11 Mouse [ASUS HID Device ASUS HID Device] on usb-0000:00:14.0-2/input2 [ 10.598428] intel_rapl: Found RAPL domain package [ 10.598433] intel_rapl: Found RAPL domain core [ 10.704116] cht-bsw-rt5645 cht-bsw-rt5645: snd-soc-dummy-dai <-> media-cpu-dai mapping ok [ 10.704186] cht-bsw-rt5645 cht-bsw-rt5645: snd-soc-dummy-dai <-> deepbuffer-cpu-dai mapping ok [ 10.704516] cht-bsw-rt5645 cht-bsw-rt5645: rt5645-aif1 <-> ssp2-port mapping ok [ 10.726155] intel_atomisp2_pm 0000:00:03.0: Refused to change power state, currently in D3 [ 10.788126] input: chtrt5645 Headset as /devices/pci0000:00/808622A8:00/cht-bsw-rt5645/sound/card0/input30 [ 10.808751] pci_bus 0000:01: Allocating resources [ 10.808775] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 10.808782] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 10.808817] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0x91000000-0x911fffff 64bit pref] [ 10.808825] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 10.810199] pci 0000:00:03.0: [8086:22b8] type 00 class 0x048000 [ 10.810229] pci 0000:00:03.0: reg 0x10: [mem 0x00000000-0x003fffff] [ 10.810640] pci 0000:00:03.0: BAR 0: assigned [mem 0x91c00000-0x91ffffff] [ 10.821566] pci_bus 0000:01: Allocating resources [ 10.884827] ath10k_pci 0000:01:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:01:00.0.bin (-2) [ 10.884991] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 10.885179] ath10k_pci 0000:01:00.0: firmware: failed to load ath10k/cal-pci-0000:01:00.0.bin (-2) [ 10.901914] ath10k_pci 0000:01:00.0: firmware: direct-loading firmware ath10k/QCA9377/hw1.0/firmware-6.bin [ 10.901933] ath10k_pci 0000:01:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 1a3b:2a51 [ 10.901937] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0 [ 10.903147] ath10k_pci 0000:01:00.0: firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 42e41877 [ 11.071391] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 11.087072] ath10k_pci 0000:01:00.0: firmware: direct-loading firmware ath10k/QCA9377/hw1.0/board-2.bin [ 11.087637] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a [ 11.364547] Bluetooth: Core ver 2.22 [ 11.364593] NET: Registered protocol family 31 [ 11.364595] Bluetooth: HCI device and connection manager initialized [ 11.364854] Bluetooth: HCI socket layer initialized [ 11.364860] Bluetooth: L2CAP socket layer initialized [ 11.364876] Bluetooth: SCO socket layer initialized [ 11.422382] usbcore: registered new interface driver btusb [ 11.433376] bluetooth hci0: firmware: direct-loading firmware qca/rampatch_usb_00000302.bin [ 11.433389] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [ 11.433393] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [ 11.511886] bluetooth hci0: firmware: direct-loading firmware qca/nvm_usb_00000302.bin [ 11.511900] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [ 12.058694] ath10k_pci 0000:01:00.0: Unknown eventid: 118809 [ 12.061615] ath10k_pci 0000:01:00.0: Unknown eventid: 90118 [ 12.062818] ath10k_pci 0000:01:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 12.069593] ath: EEPROM regdomain: 0x6a [ 12.069601] ath: EEPROM indicates we should expect a direct regpair map [ 12.069611] ath: Country alpha2 being used: 00 [ 12.069615] ath: Regpair used: 0x6a [ 12.128438] ath10k_pci 0000:01:00.0 wlp1s0: renamed from wlan0 [ 12.323737] Adding 4118524k swap on /dev/mmcblk0p7. Priority:-2 extents:1 across:4118524k SSFS [ 12.463937] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null) [ 12.935014] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 12.939575] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 12.962128] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 13.042684] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 13.065646] systemd-journald[329]: Received request to flush runtime journal from PID 1 [ 13.196390] audit: type=1400 audit(1607900498.179:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=916 comm="apparmor_parser" [ 13.196403] audit: type=1400 audit(1607900498.179:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=916 comm="apparmor_parser" [ 13.196410] audit: type=1400 audit(1607900498.179:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=916 comm="apparmor_parser" [ 13.197245] audit: type=1400 audit(1607900498.179:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="torbrowser_tor" pid=915 comm="apparmor_parser" [ 13.202899] audit: type=1400 audit(1607900498.183:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=918 comm="apparmor_parser" [ 13.203313] audit: type=1400 audit(1607900498.183:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="torbrowser_firefox" pid=914 comm="apparmor_parser" [ 13.204752] audit: type=1400 audit(1607900498.187:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=913 comm="apparmor_parser" [ 13.215966] audit: type=1400 audit(1607900498.199:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=920 comm="apparmor_parser" [ 14.070664] pci_bus 0000:01: Allocating resources [ 14.072280] pci 0000:00:03.0: [8086:22b8] type 00 class 0x048000 [ 14.072311] pci 0000:00:03.0: reg 0x10: [mem 0x00000000-0x003fffff] [ 14.073031] pci 0000:00:03.0: BAR 0: assigned [mem 0x91c00000-0x91ffffff] [ 14.076657] pci_bus 0000:01: Allocating resources [ 14.096692] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.096697] Bluetooth: BNEP filters: protocol multicast [ 14.096707] Bluetooth: BNEP socket layer initialized [ 14.997370] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 [ 15.068254] EXT4-fs (dm-1): re-mounted. Opts: commit=600 [ 15.174901] EXT4-fs (mmcblk0p5): re-mounted. Opts: commit=600 [ 15.231524] EXT4-fs (dm-4): re-mounted. Opts: commit=600 [ 15.306293] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 15.312102] EXT4-fs (dm-2): re-mounted. Opts: commit=600 [ 15.362482] EXT4-fs (dm-3): re-mounted. Opts: commit=600 [ 15.400873] EXT4-fs (mmcblk1p2): re-mounted. Opts: commit=600 [ 16.075962] ath10k_pci 0000:01:00.0: Unknown eventid: 118809 [ 16.078808] ath10k_pci 0000:01:00.0: Unknown eventid: 90118 [ 16.124271] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 16.905378] ath10k_pci 0000:01:00.0: Unknown eventid: 118809 [ 16.908340] ath10k_pci 0000:01:00.0: Unknown eventid: 90118 [ 16.951758] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 17.459953] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 22.346908] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 27.242580] wlp1s0: authenticate with 30:23:03:db:fb:f2 [ 27.242601] wlp1s0: AP VHT information is invalid, disable VHT [ 27.273989] wlp1s0: send auth to 30:23:03:db:fb:f2 (try 1/3) [ 27.275019] wlp1s0: authenticated [ 27.283821] wlp1s0: associate with 30:23:03:db:fb:f2 (try 1/3) [ 27.301934] wlp1s0: RX AssocResp from 30:23:03:db:fb:f2 (capab=0x11 status=0 aid=3) [ 27.306656] wlp1s0: associated [ 27.483648] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [ 52.171241] intel_sst_acpi 808622A8:00: FW Version 01.0b.02.02 [ 52.467372] Bluetooth: RFCOMM TTY layer initialized [ 52.467389] Bluetooth: RFCOMM socket layer initialized [ 52.467401] Bluetooth: RFCOMM ver 1.11 ** Model information sys_vendor: ASUSTeK COMPUTER INC. product_name: T102HA product_version: 1.0 chassis_vendor: ASUSTeK COMPUTER INC. chassis_version: 1.0 bios_vendor: American Megatrends Inc. bios_version: T102HA.303 board_vendor: ASUSTeK COMPUTER INC. board_name: T102HA board_version: 1.0 ** Loaded modules: rfcomm ctr ccm cmac cpufreq_userspace cpufreq_powersave cpufreq_conservative bnep nls_ascii nls_cp437 vfat fat arc4 btusb btrtl btbcm btintel bluetooth drbg ansi_cprng ecdh_generic snd_soc_sst_cht_bsw_rt5645 joydev intel_rapl intel_powerclamp coretemp ath10k_pci kvm_intel ath10k_core ath gpio_keys kvm mac80211 irqbypass crct10dif_pclmul crc32_pclmul efi_pstore ghash_clmulni_intel hid_sensor_accel_3d intel_cstate pcspkr efivars hid_sensor_trigger asus_nb_wmi cfg80211 wdat_wdt asus_wmi hid_sensor_iio_common industrialio_triggered_buffer hid_multitouch kfifo_buf industrialio rfkill snd_intel_sst_acpi snd_intel_sst_core snd_soc_sst_atom_hifi2_platform snd_soc_rt5645 snd_soc_acpi_intel_match processor_thermal_device snd_soc_acpi snd_soc_rl6231 intel_soc_dts_iosf intel_atomisp2_pm snd_soc_core snd_compress snd_pcm tpm_crb tpm_tis snd_timer tpm_tis_core battery snd dw_dmac intel_hid pwm_lpss_platform dw_dmac_core sparse_keymap soundcore tpm pwm_lpss int3400_thermal rng_core acpi_thermal_rel pcc_cpufreq int3403_thermal int340x_thermal_zone int3406_thermal evdev acpi_pad intel_int0002_vgpio ac soc_button_array parport_pc ppdev lp parport efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb dm_mod hid_sensor_custom hid_sensor_hub intel_ishtp_hid usbhid hid_generic i2c_hid hid intel_soc_pmic_chtdc_ti i915 crc32c_intel mmc_block i2c_algo_bit drm_kms_helper aesni_intel xhci_pci xhci_hcd aes_x86_64 crypto_simd cryptd glue_helper drm usbcore intel_ish_ipc lpc_ich intel_ishtp mfd_core usb_common wmi thermal sdhci_acpi video sdhci i2c_designware_platform i2c_designware_core mmc_core spi_pxa2xx_platform button ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register [8086:2280] (rev 36) Subsystem: ASUSTeK Computer Inc. Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register [1043:1400] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel driver in use: iosf_mbi_pci 00:02.0 VGA compatible controller [0300]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers [8086:22b0] (rev 36) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers [1043:1400] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 127 Region 0: Memory at 90000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=64] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:03.0 Multimedia controller [0480]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Imaging Unit [8086:22b8] (rev 36) Subsystem: ASUSTeK Computer Inc. Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Imaging Unit [1043:1400] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 0 Region 0: [virtual] Memory at 91c00000 (32-bit, non-prefetchable) [size=4M] Capabilities: <access denied> Kernel driver in use: intel_atomisp2_pm Kernel modules: intel_atomisp2_pm 00:0a.0 Non-VGA unclassified device [0000]: Intel Corporation Device [8086:22d8] (rev 36) Subsystem: ASUSTeK Computer Inc. Device [1043:1400] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at 91a3a000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel_ish_ipc Kernel modules: intel_ish_ipc 00:0b.0 Signal processing controller [1180]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management Controller [8086:22dc] (rev 36) Subsystem: ASUSTeK Computer Inc. Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management Controller [1043:1400] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 131 Region 0: Memory at 91a39000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: proc_thermal Kernel modules: processor_thermal_device 00:14.0 USB controller [0c03]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller [8086:22b5] (rev 36) (prog-if 30 [XHCI]) Subsystem: ASUSTeK Computer Inc. Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller [1043:1400] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 118 Region 0: Memory at 91a00000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:1a.0 Encryption controller [1080]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine [8086:2298] (rev 36) Subsystem: ASUSTeK Computer Inc. Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine [1043:1400] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 255 Region 0: Memory at 91900000 (32-bit, non-prefetchable) [size=1M] Region 1: Memory at 91800000 (32-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:1c.0 PCI bridge [0604]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #1 [8086:22c8] (rev 36) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 117 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: 91600000-917fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1f.0 ISA bridge [0601]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU [8086:229c] (rev 36) Subsystem: ASUSTeK Computer Inc. Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU [1043:1400] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich Kernel modules: lpc_ich 01:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter [168c:0042] (rev 31) Subsystem: AzureWave QCA9377 802.11ac Wireless Network Adapter [1a3b:2a51] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 138 Region 0: Memory at 91600000 (64-bit, non-prefetchable) [size=2M] Capabilities: <access denied> Kernel driver in use: ath10k_pci Kernel modules: ath10k_pci ** USB devices: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 005: ID 04f3:0903 Elan Microelectronics Corp. Bus 001 Device 004: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 001 Device 003: ID 13d3:3501 IMC Networks Bus 001 Device 002: ID 0b05:183b ASUSTek Computer, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 10.7 APT prefers stable APT policy: (900, 'stable'), (500, 'stable-updates'), (80, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 4.19.0-9-amd64 (SMP w/4 CPU cores) Locale: LANG=en_CA.utf8, LC_CTYPE=en_CA.utf8 (charmap=UTF-8), LANGUAGE=en_CA:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-4.19.0-9-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.133+deb10u1 ii kmod 26-1 ii linux-base 4.6 Versions of packages linux-image-4.19.0-9-amd64 recommends: ii apparmor 2.13.2-10 ii firmware-linux-free 3.4 Versions of packages linux-image-4.19.0-9-amd64 suggests: pn debian-kernel-handbook <none> ii grub-efi-amd64 2.02+dfsg1-20+deb10u2 pn linux-doc-4.19 <none> Versions of packages linux-image-4.19.0-9-amd64 is related to: ii firmware-amd-graphics 20190114-2 ii firmware-atheros 20190114-2 pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> ii firmware-intel-sound 20190114-2 pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux-nonfree 20190114-2 ii firmware-misc-nonfree 20190114-2 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
