--- Begin Message ---
Package: src:linux
Version: 5.8.10-1
Severity: normal
Dear Maintainer,
I am reporting a similar symptom to
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=968109
for a different kernel package (armmp-lpae).
PCI peripherals of Raspberry Pi 4B (8GB model) are completely
invisible. lspci shows nothing.
As a result, USB is unusable.
Best regards, Ryutaroh Matsumoto
-- Package-specific info:
** Version:
Linux version 5.8.0-2-armmp-lpae (debian-kernel@lists.debian.org) (gcc-10
(Debian 10.2.0-8) 10.2.0, GNU ld (GNU Binutils for Debian) 2.35) #1 SMP Debian
5.8.10-1 (2020-09-19)
** Command line:
video=HDMI-A-1:3840x2160M@30,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48
dma.dmachans=0x71f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x488d2af3
bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42
bcm2709.disk_led_active_low=0 smsc95xx.macaddr=DC:A6:32:BB:99:D9
vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0
console=ttyS1,115200 root=/dev/mmcblk1p2 rw elevator=deadline fsck.repair=yes
net.ifnames=0 rootwait
** Tainted: CE (9216)
* staging driver was loaded
* unsigned module was loaded
** Kernel log:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.8.0-2-armmp-lpae
(debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.0-8) 10.2.0, GNU ld (GNU
Binutils for Debian) 2.35) #1 SMP Debian 5.8.10-1 (2020-09-19)
[ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.4
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037000000,
size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id
shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] On node 0 totalpages: 2061312
[ 0.000000] DMA zone: 2304 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 196608 pages, LIFO batch:63
[ 0.000000] HighMem zone: 1864704 pages, LIFO batch:63
[ 0.000000] percpu: Embedded 21 pages/cpu s54220 r8192 d23604 u86016
[ 0.000000] pcpu-alloc: s54220 r8192 d23604 u86016 alloc=21*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2059008
[ 0.000000] Kernel command line:
video=HDMI-A-1:3840x2160M@30,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48
dma.dmachans=0x71f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x488d2af3
bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42
bcm2709.disk_led_active_low=0 smsc95xx.macaddr=DC:A6:32:BB:99:D9
vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0
console=ttyS1,115200 root=/dev/mmcblk1p2 rw elevator=deadline fsck.repair=yes
net.ifnames=0 rootwait
[ 0.000000] Kernel parameter elevator= does not have any effect anymore.
Please use sysfs to set IO scheduler for individual devices.
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes,
linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes,
linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x23985000-0x27985000] (64MB)
[ 0.000000] Memory: 7974884K/8245248K available (10240K kernel code, 1263K
rwdata, 3228K rodata, 2048K init, 336K bss, 204828K reserved, 65536K
cma-reserved, 7393280K highmem)
[ 0.000000] random: get_random_u32 called from
__kmem_cache_create+0x48/0x570 with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 35987 entries in 71 pages
[ 0.000000] ftrace: allocated 71 pages with 4 groups
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25
jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every
2147483647500ns
[ 0.000027] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 1911260446275 ns
[ 0.000087] bcm2835: system timer (irq = 17)
[ 0.002136] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.002154] clocksource: arch_sys_counter: mask: 0xffffffffffffff
max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.002172] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every
4398046511102ns
[ 0.002187] Switching to timer-based delay loop, resolution 18ns
[ 0.002577] Console: colour dummy device 80x30
[ 0.003135] printk: console [tty0] enabled
[ 0.003190] Calibrating delay loop (skipped), value calculated using timer
frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.003220] pid_max: default: 32768 minimum: 301
[ 0.003434] LSM: Security Framework initializing
[ 0.003505] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.003661] AppArmor: AppArmor initialized
[ 0.003684] TOMOYO Linux initialized
[ 0.003767] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes,
linear)
[ 0.003798] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes,
linear)
[ 0.004854] CPU: Testing write buffer coherency: ok
[ 0.005184] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.005790] Setting up static identity map for 0x400000 - 0x4000ac
[ 0.006649] rcu: Hierarchical SRCU implementation.
[ 0.009388] EFI services will not be available.
[ 0.009801] smp: Bringing up secondary CPUs ...
[ 0.010703] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.011666] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.012542] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.012669] smp: Brought up 1 node, 4 CPUs
[ 0.012722] SMP: Total of 4 processors activated (432.00 BogoMIPS).
[ 0.012741] CPU: All CPU(s) started in HYP mode.
[ 0.012756] CPU: Virtualization extensions available.
[ 0.013558] devtmpfs: initialized
[ 0.021349] VFP support v0.3: implementor 41 architecture 3 part 40 variant
8 rev 0
[ 0.021854] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.021934] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.023859] pinctrl core: initialized pinctrl subsystem
[ 0.024729] thermal_sys: Registered thermal governor 'fair_share'
[ 0.024734] thermal_sys: Registered thermal governor 'step_wise'
[ 0.025001] DMI not present or invalid.
[ 0.025414] NET: Registered protocol family 16
[ 0.028067] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.028798] audit: initializing netlink subsys (disabled)
[ 0.029027] audit: type=2000 audit(0.024:1): state=initialized
audit_enabled=0 res=1
[ 0.030380] No ATAGs?
[ 0.030529] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint
registers.
[ 0.030553] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.031551] Serial: AMBA PL011 UART driver
[ 0.054327] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 1.134817] iommu: Default domain type: Translated
[ 1.135520] vgaarb: loaded
[ 1.136284] mc: Linux media interface: v0.10
[ 1.136333] videodev: Linux video capture interface: v2.00
[ 1.137583] NetLabel: Initializing
[ 1.137602] NetLabel: domain hash size = 128
[ 1.137618] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 1.137701] NetLabel: unlabeled traffic allowed by default
[ 1.138217] clocksource: Switched to clocksource arch_sys_counter
[ 1.230187] VFS: Disk quotas dquot_6.6.0
[ 1.230323] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.231227] AppArmor: AppArmor Filesystem Enabled
[ 1.231959] simple-framebuffer 3e29a000.framebuffer: framebuffer at
0x3e29a000, 0x960000 bytes, mapped to 0x(ptrval)
[ 1.231991] simple-framebuffer 3e29a000.framebuffer: format=a8r8g8b8,
mode=1920x1280x32, linelength=7680
[ 1.255171] Console: switching to colour frame buffer device 240x80
[ 1.277790] simple-framebuffer 3e29a000.framebuffer: fb0: simplefb
registered!
[ 1.287737] NET: Registered protocol family 2
[ 1.288484] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144
bytes, linear)
[ 1.288655] TCP established hash table entries: 8192 (order: 3, 32768 bytes,
linear)
[ 1.288868] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 1.289035] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.289276] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 1.289410] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 1.289695] NET: Registered protocol family 1
[ 1.289792] NET: Registered protocol family 44
[ 1.289877] PCI: CLS 0 bytes, default 64
[ 1.290362] Trying to unpack rootfs image as initramfs...
[ 3.006881] Freeing initrd memory: 22996K
[ 3.009022] Initialise system trusted keyrings
[ 3.009165] Key type blacklist registered
[ 3.009424] workingset: timestamp_bits=14 max_order=21 bucket_order=7
[ 3.017301] zbud: loaded
[ 3.018389] integrity: Platform Keyring initialized
[ 3.018487] Key type asymmetric registered
[ 3.018561] Asymmetric key parser 'x509' registered
[ 3.018873] bounce: pool size: 64 pages
[ 3.018985] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
250)
[ 3.019365] io scheduler mq-deadline registered
[ 3.034813] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
[ 3.037244] printk: console [ttyS1] disabled
[ 3.037402] fe215040.serial: ttyS1 at MMIO 0xfe215040 (irq = 33, base_baud =
33402922) is a 16550
[ 3.857414] printk: console [ttyS1] enabled
[ 3.862711] Serial: AMBA driver
[ 3.867145] STM32 USART driver initialized
[ 3.872881] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains
driver
[ 3.882224] libphy: Fixed MDIO Bus: probed
[ 3.886962] mousedev: PS/2 mouse device common for all mice
[ 3.897321] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.904139] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 3.911145] NET: Registered protocol family 10
[ 3.955781] Segment Routing with IPv6
[ 3.959787] mip6: Mobile IPv6
[ 3.962869] NET: Registered protocol family 17
[ 3.967624] mpls_gso: MPLS GSO support
[ 3.971832] Registering SWP/SWPB emulation handler
[ 3.976963] registered taskstats version 1
[ 3.981209] Loading compiled-in X.509 certificates
[ 4.234156] Loaded X.509 cert 'Debian Secure Boot CA:
6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 4.243231] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
[ 4.250491] zswap: loaded using pool lzo/zbud
[ 4.255618] Key type ._fscrypt registered
[ 4.259790] Key type .fscrypt registered
[ 4.263866] Key type fscrypt-provisioning registered
[ 4.269180] AppArmor: AppArmor sha1 policy hashing enabled
[ 4.281476] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 31, base_baud
= 0) is a PL011 rev2
[ 4.296512] serial serial0: tty port ttyAMA0 registered
[ 4.310489] raspberrypi-firmware soc:firmware: Attached to firmware from
2020-06-01T13:23:40
[ 4.325649] raspberrypi-clk raspberrypi-clk: CPU frequency range: min
600000000, max 1500000000
[ 4.359099] Freeing unused kernel memory: 2048K
[ 4.370154] Checked W+X mappings: passed, no W+X pages found
[ 4.381747] Run /init as init process
[ 4.391228] with arguments:
[ 4.391236] /init
[ 4.391243] with environment:
[ 4.391250] HOME=/
[ 4.391256] TERM=linux
[ 4.760682] sdhci: module verification failed: signature and/or required key
missing - tainting kernel
[ 4.770510] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 4.800331] sdhci: Secure Digital Host Controller Interface driver
[ 4.813371] sdhci: Copyright(c) Pierre Ossman
[ 4.832177] sdhci-pltfm: SDHCI platform and OF driver helper
[ 4.857143] usbcore: registered new interface driver usbfs
[ 4.871314] usbcore: registered new interface driver hub
[ 4.871338] sdhci-iproc fe300000.sdhci: allocated mmc-pwrseq
[ 4.883562] usbcore: registered new device driver usb
[ 4.922433] mmc0: SDHCI controller on fe300000.sdhci [fe300000.sdhci] using
PIO
[ 4.948231] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator
[ 4.956953] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[ 4.961518] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator
[ 4.974682] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 4.983295] mmc1: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using
ADMA
[ 5.013078] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 5.028062] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[ 5.041355] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 5.082364] random: fast init done
[ 5.087652] dwc2 fe980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM
[ 5.091733] mmc1: new ultra high speed DDR50 SDHC card at address 5048
[ 5.118639] mmcblk1: mmc1:5048 SD32G 28.9 GiB
[ 5.131922] mmcblk1: p1 p2 p3
[ 5.172801] mmc0: new high speed SDIO card at address 0001
[ 5.386768] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode.
Opts: (null)
[ 5.589062] Not activating Mandatory Access Control as /sbin/tomoyo-init
does not exist.
[ 5.942409] systemd[1]: System time before build time, advancing clock.
[ 6.000755] systemd[1]: Inserted module 'autofs4'
[ 6.050447] systemd[1]: systemd 246.6-1 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS
+ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2
default-hierarchy=hybrid)
[ 6.085961] systemd[1]: Detected architecture arm.
[ 6.139479] systemd[1]: Set hostname to <rpi4armhf-20200927>.
[ 6.796863] systemd[1]: Queued start job for default target Graphical
Interface.
[ 6.811918] random: systemd: uninitialized urandom read (16 bytes read)
[ 6.829846] systemd[1]: Created slice system-getty.slice.
[ 6.858529] random: systemd: uninitialized urandom read (16 bytes read)
[ 6.873069] systemd[1]: Created slice system-modprobe.slice.
[ 6.902406] random: systemd: uninitialized urandom read (16 bytes read)
[ 6.917039] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 6.948386] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 6.979872] systemd[1]: Created slice system-wpa_supplicant.slice.
[ 7.011743] systemd[1]: Created slice User and Session Slice.
[ 7.038728] systemd[1]: Started Dispatch Password Requests to Console
Directory Watch.
[ 7.070680] systemd[1]: Started Forward Password Requests to Wall Directory
Watch.
[ 7.103337] systemd[1]: Set up automount Arbitrary Executable File Formats
File System Automount Point.
[ 7.138692] systemd[1]: Reached target Local Encrypted Volumes.
[ 7.166547] systemd[1]: Reached target Paths.
[ 7.190468] systemd[1]: Reached target Remote File Systems.
[ 7.218413] systemd[1]: Reached target Slices.
[ 7.243128] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 7.274687] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 7.303178] systemd[1]: Listening on Journal Audit Socket.
[ 7.331044] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.359059] systemd[1]: Listening on Journal Socket.
[ 7.387194] systemd[1]: Listening on Network Service Netlink Socket.
[ 7.419119] systemd[1]: Listening on udev Control Socket.
[ 7.446917] systemd[1]: Listening on udev Kernel Socket.
[ 7.480169] systemd[1]: Mounting Huge Pages File System...
[ 7.512089] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.548292] systemd[1]: Mounting Kernel Debug File System...
[ 7.580883] systemd[1]: Mounting Kernel Trace File System...
[ 7.616739] systemd[1]: Starting Set the console keyboard layout...
[ 7.652889] systemd[1]: Starting Create list of static device nodes for the
current kernel...
[ 7.692438] systemd[1]: Starting Load Kernel Module drm...
[ 7.728445] systemd[1]: Condition check resulted in Set Up Additional Binary
Formats being skipped.
[ 7.744263] systemd[1]: Condition check resulted in File System Check on
Root Device being skipped.
[ 7.775574] systemd[1]: Starting Journal Service...
[ 7.811288] systemd[1]: Starting Load Kernel Modules...
[ 7.837084] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 7.873130] systemd[1]: Starting Coldplug All udev Devices...
[ 7.911675] EXT4-fs (mmcblk1p2): re-mounted. Opts: discard
[ 7.915788] systemd[1]: Mounted Huge Pages File System.
[ 7.955686] systemd[1]: Mounted POSIX Message Queue File System.
[ 7.987123] systemd[1]: Mounted Kernel Debug File System.
[ 8.015243] systemd[1]: Mounted Kernel Trace File System.
[ 8.045959] systemd[1]: Finished Create list of static device nodes for the
current kernel.
[ 8.080365] systemd[1]: modprobe@drm.service: Succeeded.
[ 8.095114] systemd[1]: Finished Load Kernel Module drm.
[ 8.126873] systemd[1]: Finished Load Kernel Modules.
[ 8.155116] systemd[1]: Started Journal Service.
[ 9.208658] vchiq: module is from the staging directory, the quality is
unknown, you have been warned.
[ 9.241163] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 9.319126] iproc-rng200 fe104000.rng: hwrng registered
[ 9.530324] cfg80211: Loading compiled-in X.509 certificates for regulatory
database
[ 9.546497] cfg80211: Loaded X.509 cert 'b...@debian.org:
577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 9.561049] cfg80211: Loaded X.509 cert 'romain.per...@gmail.com:
3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 9.575604] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 9.594132] platform regulatory.0: firmware: direct-loading firmware
regulatory.db
[ 9.609185] platform regulatory.0: firmware: direct-loading firmware
regulatory.db.p7s
[ 9.668003] bcm2835_v4l2: module is from the staging directory, the quality
is unknown, you have been warned.
[ 9.670178] snd_bcm2835: module is from the staging directory, the quality
is unknown, you have been warned.
[ 9.705988] bcm2835_audio bcm2835_audio: card created with 8 channels
[ 9.738620] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio
for chip BCM4345/6
[ 9.753179] usbcore: registered new interface driver brcmfmac
[ 9.757489] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 9.785343] brcmfmac mmc0:0001:1: firmware: direct-loading firmware
brcm/brcmfmac43455-sdio.bin
[ 9.803421] brcmfmac mmc0:0001:1: firmware: direct-loading firmware
brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt
[ 9.862245] random: crng init done
[ 9.868707] random: 7 urandom warning(s) missed due to ratelimiting
[ 9.933685] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio
for chip BCM4345/6
[ 9.947554] brcmfmac mmc0:0001:1: firmware: failed to load
brcm/brcmfmac43455-sdio.clm_blob (-2)
[ 9.959528] firmware_class: See https://wiki.debian.org/Firmware for
information about missing firmware
[ 9.972413] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available
(err=-2), device may have limited channels available
[ 9.993011] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 1
2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4
[ 10.028888] Adding 10485756k swap on /dev/mmcblk1p3. Priority:-2 extents:1
across:10485756k SSDscFS
[ 10.048805] Bluetooth: Core ver 2.22
[ 10.056067] NET: Registered protocol family 31
[ 10.063832] Bluetooth: HCI device and connection manager initialized
[ 10.074078] Bluetooth: HCI socket layer initialized
[ 10.082413] Bluetooth: L2CAP socket layer initialized
[ 10.091160] Bluetooth: SCO socket layer initialized
[ 10.682009] audit: type=1400 audit(1600712920.731:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="lsb_release" pid=394
comm="apparmor_parser"
[ 10.701969] audit: type=1400 audit(1600712920.735:3): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=395
comm="apparmor_parser"
[ 10.720704] audit: type=1400 audit(1600712920.735:4): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod"
pid=395 comm="apparmor_parser"
[ 16.641578] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 260.046099] audit: type=1400 audit(1601167761.953:5): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=7330
comm="apparmor_parser"
[ 260.061617] audit: type=1400 audit(1601167761.957:6): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_filter" pid=7330
comm="apparmor_parser"
[ 260.076954] audit: type=1400 audit(1601167761.957:7): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_groff" pid=7330
comm="apparmor_parser"
** Model information
Hardware : BCM2711
Revision : 0000
Device Tree model: Raspberry Pi 4 Model B Rev 1.4
** Loaded modules:
nls_ascii(E)
nls_cp437(E)
vfat(E)
fat(E)
btsdio(E)
bluetooth(E)
jitterentropy_rng(E)
drbg(E)
ansi_cprng(E)
ecdh_generic(E)
ecc(E)
snd_bcm2835(CE)
bcm2835_v4l2(CE)
brcmfmac(E)
videobuf2_vmalloc(E)
snd_pcm(E)
videobuf2_memops(E)
videobuf2_v4l2(E)
snd_timer(E)
brcmutil(E)
videobuf2_common(E)
snd(E)
soundcore(E)
cpufreq_dt(E)
cfg80211(E)
rfkill(E)
raspberrypi_cpufreq(E)
iproc_rng200(E)
rng_core(E)
vchiq(CE)
pwm_bcm2835(E)
bcm2835_wdt(E)
leds_gpio(E)
drm(E)
ip_tables(E)
x_tables(E)
autofs4(E)
ext4(E)
crc16(E)
mbcache(E)
jbd2(E)
crc32c_generic(E)
dwc2(E)
udc_core(E)
sdhci_iproc(E)
usbcore(E)
sdhci_pltfm(E)
i2c_bcm2835(E)
gpio_regulator(E)
phy_generic(E)
sdhci(E)
** Network status:
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
wlan0: 14263222 12262 0 0 0 0 0 6 845293
6144 0 0 0 0 0 0
** PCI devices:
not available
** USB devices:
not available
-- System Information:
Debian Release: bullseye/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: armhf (armv7l)
Kernel: Linux 5.8.0-2-armmp-lpae (SMP w/4 CPU threads)
Kernel taint flags: TAINT_CRAP, TAINT_UNSIGNED_MODULE
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.8.0-2-armmp-lpae depends on:
ii initramfs-tools [linux-initramfs-tool] 0.139
ii kmod 27+20200310-2
ii linux-base 4.6
Versions of packages linux-image-5.8.0-2-armmp-lpae recommends:
ii apparmor 2.13.4-3
ii firmware-linux-free 20200122-1
Versions of packages linux-image-5.8.0-2-armmp-lpae suggests:
pn debian-kernel-handbook <none>
pn linux-doc-5.8 <none>
Versions of packages linux-image-5.8.0-2-armmp-lpae is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 20200817-1
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20200817-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---
signature.asc
