Package: src:linux
Version: 5.7.10-1
Severity: normal
Dear Maintainer,
DRM is unavailable on Raspberry Pi 4B (board revision 1.4).
Lack of DRM prevents drm_backend in weston/wayland.
X server does not start without installation of xserver-xorg-video-fbdev.
In contrast to the Debian kernel, the kernel from Raspbian Foundation
allows drm_backend in weston, and it does not need xserver-xorg-video-fbdev.
Best regards, Ryutaroh Matsumoto
-- Package-specific info:
** Version:
Linux version 5.7.0-2-arm64 (debian-kernel@lists.debian.org) (gcc version 9.3.0
(Debian 9.3.0-15), GNU ld (GNU Binutils for Debian) 2.35) #1 SMP Debian
5.7.10-1 (2020-07-26)
** Command line:
video=HDMI-A-1:3840x2160M@30,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48
dma.dmachans=0x71f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x488d2af3
bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42
bcm2709.disk_led_active_low=0 smsc95xx.macaddr=DC:A6:32:BB:99:D9
vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0
console=ttyS1,115200 root=/dev/mmcblk1p2 rw elevator=bfq fsck.repair=yes
net.ifnames=0 rootwait systemd.unified_cgroup_hierarchy=1
** Tainted: C (1024)
* staging driver was loaded
** Kernel log:
Unable to read kernel log; any relevant messages should be attached
dmesg out put is included here:
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 5.7.0-2-arm64 (debian-kernel@lists.debian.org)
(gcc version 9.3.0 (Debian 9.3.0-15), GNU ld (GNU Binutils for Debian) 2.35) #1
SMP Debian 5.7.10-1 (2020-07-26)
[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.4
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000029000000,
size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id
shared-dma-pool
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem
0x0000000000000000-0x00000001ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x1ff0730c0-0x1ff074fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] On node 0 totalpages: 2015232
[ 0.000000] DMA zone: 3072 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 196608 pages, LIFO batch:63
[ 0.000000] DMA32 zone: 12288 pages used for memmap
[ 0.000000] DMA32 zone: 770048 pages, LIFO batch:63
[ 0.000000] Normal zone: 16384 pages used for memmap
[ 0.000000] Normal zone: 1048576 pages, LIFO batch:63
[ 0.000000] percpu: Embedded 32 pages/cpu s93720 r8192 d29160 u131072
[ 0.000000] pcpu-alloc: s93720 r8192 d29160 u131072 alloc=32*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: EL2 vector hardening
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[ 0.000000] CPU features: detected: ARM erratum 1319367
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1983488
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
video=HDMI-A-1:3840x2160M@30,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48
dma.dmachans=0x71f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x488d2af3
bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42
bcm2709.disk_led_active_low=0 smsc95xx.macaddr=DC:A6:32:BB:99:D9
vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0
console=ttyS1,115200 root=/dev/mmcblk1p2 rw elevator=bfq fsck.repair=yes
net.ifnames=0 rootwait systemd.unified_cgroup_hierarchy=1
[ 0.000000] Kernel parameter elevator= does not have any effect anymore.
Please use sysfs to set IO scheduler for individual devices.
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x25000000-0x29000000] (64MB)
[ 0.000000] Memory: 4732836K/8060928K available (10684K kernel code, 1848K
rwdata, 3808K rodata, 5184K init, 561K bss, 277044K reserved, 65536K
cma-reserved)
[ 0.000000] random: get_random_u64 called from
__kmem_cache_create+0x48/0x5d0 with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 36810 entries in 144 pages
[ 0.000000] ftrace: allocated 144 pages with 2 groups
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25
jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff
max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every
4398046511102ns
[ 0.000174] Console: colour dummy device 80x25
[ 0.000584] printk: console [tty0] enabled
[ 0.000718] Calibrating delay loop (skipped), value calculated using timer
frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.000742] pid_max: default: 32768 minimum: 301
[ 0.000904] LSM: Security Framework initializing
[ 0.000944] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.001036] AppArmor: AppArmor initialized
[ 0.001054] TOMOYO Linux initialized
[ 0.001226] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes,
linear)
[ 0.001332] Mountpoint-cache hash table entries: 16384 (order: 5, 131072
bytes, linear)
[ 0.003385] rcu: Hierarchical SRCU implementation.
[ 0.005817] EFI services will not be available.
[ 0.006381] smp: Bringing up secondary CPUs ...
[ 0.007019] Detected PIPT I-cache on CPU1
[ 0.007084] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.007812] Detected PIPT I-cache on CPU2
[ 0.007851] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.008548] Detected PIPT I-cache on CPU3
[ 0.008588] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.008691] smp: Brought up 1 node, 4 CPUs
[ 0.008753] SMP: Total of 4 processors activated.
[ 0.008767] CPU features: detected: 32-bit EL0 Support
[ 0.008781] CPU features: detected: CRC32 instructions
[ 0.032573] CPU: All CPU(s) started at EL2
[ 0.032666] alternatives: patching kernel code
[ 0.173154] node 0 initialised, 746378 pages in 140ms
[ 0.175353] devtmpfs: initialized
[ 0.181491] Registered cp15_barrier emulation handler
[ 0.181524] Registered setend emulation handler
[ 0.181542] KASLR enabled
[ 0.181931] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.181963] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.184019] pinctrl core: initialized pinctrl subsystem
[ 0.184959] thermal_sys: Registered thermal governor 'fair_share'
[ 0.184964] thermal_sys: Registered thermal governor 'step_wise'
[ 0.185194] DMI not present or invalid.
[ 0.185842] NET: Registered protocol family 16
[ 0.187447] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.187469] audit: initializing netlink subsys (disabled)
[ 0.187702] audit: type=2000 audit(0.184:1): state=initialized
audit_enabled=0 res=1
[ 0.188893] cpuidle: using governor ladder
[ 0.188931] cpuidle: using governor menu
[ 0.189221] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.189338] ASID allocator initialised with 32768 entries
[ 0.189667] Serial: AMBA PL011 UART driver
[ 0.205267] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.205295] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.205310] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.205324] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.855083] ACPI: Interpreter disabled.
[ 0.855352] iommu: Default domain type: Translated
[ 0.855625] vgaarb: loaded
[ 0.855950] EDAC MC: Ver: 3.0.0
[ 0.857244] NetLabel: Initializing
[ 0.857262] NetLabel: domain hash size = 128
[ 0.857273] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.857339] NetLabel: unlabeled traffic allowed by default
[ 0.857856] clocksource: Switched to clocksource arch_sys_counter
[ 0.919179] VFS: Disk quotas dquot_6.6.0
[ 0.919268] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.920030] AppArmor: AppArmor Filesystem Enabled
[ 0.920977] simple-framebuffer 3e267000.framebuffer: framebuffer at
0x3e267000, 0x960000 bytes, mapped to 0x(____ptrval____)
[ 0.921003] simple-framebuffer 3e267000.framebuffer: format=a8r8g8b8,
mode=1920x1280x32, linelength=7680
[ 0.946638] Console: switching to colour frame buffer device 240x80
[ 0.971786] simple-framebuffer 3e267000.framebuffer: fb0: simplefb
registered!
[ 0.971987] pnp: PnP ACPI: disabled
[ 0.980344] NET: Registered protocol family 2
[ 0.981055] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4,
65536 bytes, linear)
[ 0.981263] TCP established hash table entries: 65536 (order: 7, 524288
bytes, linear)
[ 0.981764] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes,
linear)
[ 0.982709] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.983125] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.983342] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes,
linear)
[ 0.983789] NET: Registered protocol family 1
[ 0.983897] NET: Registered protocol family 44
[ 0.983986] PCI: CLS 0 bytes, default 64
[ 0.984284] Trying to unpack rootfs image as initramfs...
[ 3.074257] Freeing initrd memory: 29136K
[ 3.075619] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7
counters available
[ 3.076021] kvm [1]: IPA Size Limit: 44bits
[ 3.076824] kvm [1]: vgic interrupt IRQ1
[ 3.077064] kvm [1]: Hyp mode initialized successfully
[ 3.078842] Initialise system trusted keyrings
[ 3.078971] Key type blacklist registered
[ 3.079282] workingset: timestamp_bits=44 max_order=21 bucket_order=0
[ 3.085749] zbud: loaded
[ 3.086577] integrity: Platform Keyring initialized
[ 3.086677] Key type asymmetric registered
[ 3.086753] Asymmetric key parser 'x509' registered
[ 3.086872] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
249)
[ 3.087273] io scheduler mq-deadline registered
[ 3.093008] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.093718] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 3.093883] brcm-pcie fd500000.pcie: No bus range found for
/scb/pcie@7d500000, using [bus 00-ff]
[ 3.094058] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff ->
0x00f8000000
[ 3.094217] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff ->
0x0000000000
[ 3.159936] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 3.160250] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 3.160367] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 3.160470] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff]
(bus address [0xf8000000-0xfbffffff])
[ 3.160668] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 3.160859] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 3.163286] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]),
reconfiguring
[ 3.163542] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 3.163681] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 3.163901] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 3.175946] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 3.176089] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff]
[ 3.176219] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff
64bit]
[ 3.176359] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 3.176451] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 3.176725] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 3.176970] pcieport 0000:00:00.0: PME: Signaling with IRQ 40
[ 3.177398] pcieport 0000:00:00.0: AER: enabled with IRQ 40
[ 3.177673] pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 8.642324] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status
= 0x801
[ 8.642525] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x890 took 5336754
usecs
[ 8.651081] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 8.653068] printk: console [ttyS1] disabled
[ 8.659090] fe215040.serial: ttyS1 at MMIO 0xfe215040 (irq = 18, base_baud =
66805845) is a 16550
[ 10.781603] printk: console [ttyS1] enabled
[ 10.796911] Serial: AMBA driver
[ 10.809476] msm_serial: driver initialized
[ 10.824629] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 10.843717] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains
driver
[ 10.865161] mousedev: PS/2 mouse device common for all mice
[ 10.884490] ledtrig-cpu: registered to indicate activity on CPUs
[ 10.903428] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 10.922421] NET: Registered protocol family 10
[ 10.975522] Segment Routing with IPv6
[ 10.989305] mip6: Mobile IPv6
[ 11.001497] NET: Registered protocol family 17
[ 11.016859] mpls_gso: MPLS GSO support
[ 11.031279] registered taskstats version 1
[ 11.045783] Loading compiled-in X.509 certificates
[ 11.210280] Loaded X.509 cert 'Debian Secure Boot CA:
6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 11.234290] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
[ 11.254609] zswap: loaded using pool lzo/zbud
[ 11.270210] Key type ._fscrypt registered
[ 11.284518] Key type .fscrypt registered
[ 11.298553] Key type fscrypt-provisioning registered
[ 11.314853] AppArmor: AppArmor sha1 policy hashing enabled
[ 11.336800] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 16, base_baud
= 0) is a PL011 rev2
[ 11.361165] serial serial0: tty port ttyAMA0 registered
[ 11.379716] raspberrypi-firmware soc:firmware: Attached to firmware from
2020-06-01 13:23
[ 11.403145] raspberrypi-clk raspberrypi-clk: CPU frequency range: min
600000000, max 1500000000
[ 11.444383] Freeing unused kernel memory: 5184K
[ 11.569596] Checked W+X mappings: passed, no W+X pages found
[ 11.587215] Run /init as init process
[ 11.600663] with arguments:
[ 11.600667] /init
[ 11.600672] with environment:
[ 11.600676] HOME=/
[ 11.600680] TERM=linux
[ 11.914406] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 11.950923] sdhci: Secure Digital Host Controller Interface driver
[ 11.969763] sdhci: Copyright(c) Pierre Ossman
[ 11.990578] libphy: Fixed MDIO Bus: probed
[ 12.026850] sdhci-pltfm: SDHCI platform and OF driver helper
[ 12.048186] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 12.051062] usbcore: registered new interface driver usbfs
[ 12.066977] sdhci-iproc fe300000.sdhci: allocated mmc-pwrseq
[ 12.084334] usbcore: registered new interface driver hub
[ 12.118385] usbcore: registered new device driver usb
[ 12.129879] libphy: bcmgenet MII bus: probed
[ 12.138013] mmc0: SDHCI controller on fe300000.sdhci [fe300000.sdhci] using
PIO
[ 12.179186] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 12.187483] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[ 12.196202] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus
number 1
[ 12.213332] mmc1: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using
ADMA
[ 12.215696] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 12.217404] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 12.220438] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[ 12.222128] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 12.240683] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator
[ 12.345390] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator
[ 12.369999] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 12.380968] random: fast init done
[ 12.410921] mmc0: new high speed SDIO card at address 0001
[ 12.467952] dwc2 fe980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM
[ 12.500729] mmc1: new ultra high speed DDR50 SDHC card at address 5048
[ 12.520947] mmcblk1: mmc1:5048 SD32G 28.9 GiB
[ 12.538734] mmcblk1: p1 p2
[ 22.234559] xhci_hcd 0000:01:00.0: can't setup: -110
[ 22.250678] xhci_hcd 0000:01:00.0: USB bus 1 deregistered
[ 22.267623] xhci_hcd 0000:01:00.0: init 0000:01:00.0 fail, -110
[ 22.285557] xhci_hcd: probe of 0000:01:00.0 failed with error -110
[ 22.332017] io scheduler bfq registered
[ 22.433873] raid6: neonx8 gen() 1754 MB/s
[ 22.513854] raid6: neonx8 xor() 1306 MB/s
[ 22.593860] raid6: neonx4 gen() 1807 MB/s
[ 22.673848] raid6: neonx4 xor() 1383 MB/s
[ 22.753851] raid6: neonx2 gen() 1575 MB/s
[ 22.833856] raid6: neonx2 xor() 1225 MB/s
[ 22.913851] raid6: neonx1 gen() 1175 MB/s
[ 22.993847] raid6: neonx1 xor() 959 MB/s
[ 23.073848] raid6: int64x8 gen() 1028 MB/s
[ 23.153852] raid6: int64x8 xor() 590 MB/s
[ 23.233870] raid6: int64x4 gen() 1007 MB/s
[ 23.313846] raid6: int64x4 xor() 591 MB/s
[ 23.393850] raid6: int64x2 gen() 922 MB/s
[ 23.473863] raid6: int64x2 xor() 524 MB/s
[ 23.553856] raid6: int64x1 gen() 723 MB/s
[ 23.633861] raid6: int64x1 xor() 390 MB/s
[ 23.647565] raid6: using algorithm neonx4 gen() 1807 MB/s
[ 23.663533] raid6: .... xor() 1383 MB/s, rmw enabled
[ 23.678615] raid6: using neon recovery algorithm
[ 23.717995] xor: measuring software checksum speed
[ 23.769849] 8regs : 2391.000 MB/sec
[ 23.821849] 32regs : 2737.000 MB/sec
[ 23.873849] arm64_neon: 2502.000 MB/sec
[ 23.887157] xor: using function: 32regs (2737.000 MB/sec)
[ 24.130570] Btrfs loaded, crc32c=crc32c-generic
[ 24.450535] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode.
Opts: (null)
[ 24.669958] Not activating Mandatory Access Control as /sbin/tomoyo-init
does not exist.
[ 25.102527] systemd[1]: System time before build time, advancing clock.
[ 25.177322] systemd[1]: Inserted module 'autofs4'
[ 25.236755] systemd[1]: systemd 246-2 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS
+ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2
default-hierarchy=hybrid)
[ 25.292986] systemd[1]: Detected architecture arm64.
[ 25.335294] systemd[1]: Set hostname to <rpi4-20200805>.
[ 25.887446] systemd[1]: /lib/systemd/system/lxc.service:17: Standard output
type syslog is obsolete, automatically updating to journal. Please update your
unit file, and consider removing the setting altogether.
[ 25.931445] systemd[1]: /lib/systemd/system/lxc.service:18: Standard output
type syslog is obsolete, automatically updating to journal. Please update your
unit file, and consider removing the setting altogether.
[ 26.009007] systemd[1]: tmp.mount: Cannot add dependency job, ignoring: Unit
tmp.mount not found.
[ 26.033363] systemd[1]: display-manager.service: Cannot add dependency job,
ignoring: Unit display-manager.service not found.
[ 26.063961] systemd[1]: Queued start job for default target Graphical
Interface.
[ 26.085942] random: systemd: uninitialized urandom read (16 bytes read)
[ 26.128175] systemd[1]: Created slice system-getty.slice.
[ 26.166068] random: systemd: uninitialized urandom read (16 bytes read)
[ 26.204251] systemd[1]: Created slice system-modprobe.slice.
[ 26.242029] random: systemd: uninitialized urandom read (16 bytes read)
[ 26.276591] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 26.320644] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 26.380134] systemd[1]: Created slice system-wpa_supplicant.slice.
[ 26.424407] systemd[1]: Created slice User and Session Slice.
[ 26.462539] systemd[1]: Started Dispatch Password Requests to Console
Directory Watch.
[ 26.510280] systemd[1]: Started Forward Password Requests to Wall Directory
Watch.
[ 26.559159] systemd[1]: Set up automount Arbitrary Executable File Formats
File System Automount Point.
[ 26.610218] systemd[1]: Reached target Local Encrypted Volumes.
[ 26.650132] systemd[1]: Reached target Paths.
[ 26.682066] systemd[1]: Reached target Remote File Systems.
[ 26.722047] systemd[1]: Reached target Slices.
[ 26.754080] systemd[1]: Reached target Swap.
[ 26.786903] systemd[1]: Listening on Syslog Socket.
[ 26.822653] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 26.866305] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 26.910854] systemd[1]: Listening on Journal Audit Socket.
[ 26.950566] systemd[1]: Listening on Journal Socket (/dev/log).
[ 26.990610] systemd[1]: Listening on Journal Socket.
[ 27.026791] systemd[1]: Listening on Network Service Netlink Socket.
[ 27.070745] systemd[1]: Listening on udev Control Socket.
[ 27.110487] systemd[1]: Listening on udev Kernel Socket.
[ 27.170767] systemd[1]: Mounting Huge Pages File System...
[ 27.211835] systemd[1]: Mounting POSIX Message Queue File System...
[ 27.256355] systemd[1]: Mounting Kernel Debug File System...
[ 27.314390] systemd[1]: Mounting Kernel Trace File System...
[ 27.355718] systemd[1]: Starting Set the console keyboard layout...
[ 27.400754] systemd[1]: Starting Create list of static device nodes for the
current kernel...
[ 27.466717] systemd[1]: Starting Load Kernel Module drm...
[ 27.509736] systemd[1]: Condition check resulted in Set Up Additional Binary
Formats being skipped.
[ 27.534062] systemd[1]: Condition check resulted in File System Check on
Root Device being skipped.
[ 27.617437] systemd[1]: Starting Journal Service...
[ 27.667138] systemd[1]: Starting Load Kernel Modules...
[ 27.708182] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 27.756761] EXT4-fs (mmcblk1p2): re-mounted. Opts: discard
[ 27.792088] systemd[1]: Starting Coldplug All udev Devices...
[ 27.864790] systemd[1]: Mounted Huge Pages File System.
[ 27.902798] systemd[1]: Mounted POSIX Message Queue File System.
[ 27.942764] systemd[1]: Mounted Kernel Debug File System.
[ 27.982959] systemd[1]: Mounted Kernel Trace File System.
[ 28.023994] systemd[1]: Finished Create list of static device nodes for the
current kernel.
[ 28.079146] systemd[1]: modprobe@drm.service: Succeeded.
[ 28.097062] systemd[1]: Finished Load Kernel Module drm.
[ 28.136109] systemd[1]: Finished Load Kernel Modules.
[ 28.183893] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 28.235815] systemd[1]: Condition check resulted in FUSE Control File System
being skipped.
[ 28.259302] systemd[1]: Condition check resulted in Kernel Configuration
File System being skipped.
[ 28.286144] systemd[1]: Condition check resulted in Rebuild Hardware
Database being skipped.
[ 28.309758] systemd[1]: Condition check resulted in Platform Persistent
Storage Archival being skipped.
[ 28.342362] systemd[1]: Starting Load/Save Random Seed...
[ 28.423530] systemd[1]: Starting Apply Kernel Variables...
[ 28.469586] systemd[1]: Starting Create System Users...
[ 28.508762] systemd[1]: Finished Coldplug All udev Devices.
[ 28.568022] systemd[1]: Finished Apply Kernel Variables.
[ 28.622226] systemd[1]: Started Journal Service.
[ 29.890560] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 29.949349] iproc-rng200 fe104000.rng: hwrng registered
[ 30.062162] vchiq: module is from the staging directory, the quality is
unknown, you have been warned.
[ 30.093977] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 30.174779] cfg80211: Loading compiled-in X.509 certificates for regulatory
database
[ 30.198039] cfg80211: Loaded X.509 cert 'b...@debian.org:
577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 30.236325] cfg80211: Loaded X.509 cert 'romain.per...@gmail.com:
3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 30.265218] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 30.289959] platform regulatory.0: firmware: direct-loading firmware
regulatory.db
[ 30.319645] platform regulatory.0: firmware: direct-loading firmware
regulatory.db.p7s
[ 30.448841] Bluetooth: Core ver 2.22
[ 30.462797] NET: Registered protocol family 31
[ 30.478081] Bluetooth: HCI device and connection manager initialized
[ 30.497123] Bluetooth: HCI socket layer initialized
[ 30.515858] Bluetooth: L2CAP socket layer initialized
[ 30.599261] Bluetooth: SCO socket layer initialized
[ 30.606399] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio
for chip BCM4345/6
[ 30.645722] usbcore: registered new interface driver brcmfmac
[ 30.694535] brcmfmac mmc0:0001:1: firmware: direct-loading firmware
brcm/brcmfmac43455-sdio.bin
[ 30.735320] brcmfmac mmc0:0001:1: firmware: direct-loading firmware
brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt
[ 30.779365] random: crng init done
[ 30.788728] random: 7 urandom warning(s) missed due to ratelimiting
[ 30.858470] mc: Linux media interface: v0.10
[ 30.901881] Bluetooth: HCI UART driver ver 2.3
[ 30.913342] Bluetooth: HCI UART protocol H4 registered
[ 30.914267] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio
for chip BCM4345/6
[ 30.925679] snd_bcm2835: module is from the staging directory, the quality
is unknown, you have been warned.
[ 30.927852] Bluetooth: HCI UART protocol LL registered
[ 30.947600] brcmfmac mmc0:0001:1: firmware: failed to load
brcm/brcmfmac43455-sdio.clm_blob (-2)
[ 30.951055] videodev: Linux video capture interface: v2.00
[ 30.968354] Bluetooth: HCI UART protocol ATH3K registered
[ 30.968478] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 30.981917] firmware_class: See https://wiki.debian.org/Firmware for
information about missing firmware
[ 30.982051] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available
(err=-2), device may have limited channels available
[ 31.002799] Bluetooth: HCI UART protocol Intel registered
[ 31.017943] bcm2835_audio bcm2835_audio: card created with 8 channels
[ 31.030458] Bluetooth: HCI UART protocol Broadcom registered
[ 31.047931] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 1
2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4
[ 31.048071] hci_uart_bcm serial0-0: supply vbat not found, using dummy
regulator
[ 31.048137] hci_uart_bcm serial0-0: supply vddio not found, using dummy
regulator
[ 31.069690] Bluetooth: HCI UART protocol QCA registered
[ 31.166054] uart-pl011 fe201000.serial: no DMA platform data
[ 31.182884] Bluetooth: HCI UART protocol AG6XX registered
[ 31.182976] Bluetooth: HCI UART protocol Marvell registered
[ 31.209448] bcm2835_v4l2: module is from the staging directory, the quality
is unknown, you have been warned.
[ 31.438510] Bluetooth: hci0: BCM: chip id 107
[ 31.451366] Bluetooth: hci0: BCM: features 0x2f
[ 31.466280] Bluetooth: hci0: BCM4345C0
[ 31.476762] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 31.491598] bluetooth hci0: firmware: failed to load brcm/BCM4345C0.hcd (-2)
[ 31.509987] bluetooth hci0: Direct firmware load for brcm/BCM4345C0.hcd
failed with error -2
[ 31.529969] Bluetooth: hci0: BCM: Patch brcm/BCM4345C0.hcd not found
[ 31.780299] audit: type=1400 audit(1596440793.671:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=393
comm="apparmor_parser"
[ 31.815952] audit: type=1400 audit(1596440793.671:3): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="lsb_release" pid=398
comm="apparmor_parser"
[ 31.850262] audit: type=1400 audit(1596440793.671:4): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=396
comm="apparmor_parser"
[ 31.885490] audit: type=1400 audit(1596440793.671:5): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod"
pid=396 comm="apparmor_parser"
[ 31.920499] audit: type=1400 audit(1596440793.671:6): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=400
comm="apparmor_parser"
[ 31.953898] audit: type=1400 audit(1596440793.671:7): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_filter" pid=400
comm="apparmor_parser"
[ 31.986923] audit: type=1400 audit(1596440793.671:8): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_groff" pid=400
comm="apparmor_parser"
[ 32.019775] audit: type=1400 audit(1596440793.711:9): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="lxc-container-default"
pid=395 comm="apparmor_parser"
[ 32.054839] audit: type=1400 audit(1596440793.711:10): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="lxc-container-default-cgns"
pid=395 comm="apparmor_parser"
[ 32.090932] audit: type=1400 audit(1596440793.711:11): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="lxc-container-default-with-mounting" pid=395 comm="apparmor_parser"
[ 33.429351] bridge: filtering via arp/ip/ip6tables is no longer available by
default. Update your scripts to load br_netfilter if you need this.
[ 33.495290] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 33.510228] Bluetooth: BNEP filters: protocol multicast
[ 33.525519] Bluetooth: BNEP socket layer initialized
[ 33.555398] NET: Registered protocol family 38
[ 38.967931] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1410.920377] systemd-xdg-autostart-generator[541]: Not generating service for
XDG autostart app-xdg\x2duser\x2ddirs-autostart.service, startup phases are not
supported.
[ 1423.305481] systemd-xdg-autostart-generator[576]: Not generating service for
XDG autostart app-xdg\x2duser\x2ddirs-autostart.service, startup phases are not
supported.
** Model information
Device Tree model: Raspberry Pi 4 Model B Rev 1.4
** Loaded modules:
xt_CHECKSUM
nft_chain_nat
xt_MASQUERADE
nf_nat
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
cmac
algif_hash
nft_counter
algif_skcipher
xt_tcpudp
af_alg
nft_compat
bnep
bridge
stp
llc
nf_tables
nfnetlink
nls_ascii
nls_cp437
vfat
fat
bcm2835_v4l2(C)
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
videobuf2_common
snd_bcm2835(C)
videodev
hci_uart
snd_pcm
mc
btqca
snd_timer
btrtl
snd
btbcm
soundcore
btintel
btsdio
cpufreq_dt
brcmfmac
bluetooth
raspberrypi_cpufreq
vchiq(C)
brcmutil
jitterentropy_rng
cfg80211
drbg
ansi_cprng
ecdh_generic
ecc
iproc_rng200
bcm2711_thermal
pwm_bcm2835
rfkill
bcm2835_wdt
rng_core
leds_gpio
drm
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
btrfs
blake2b_generic
xor
xor_neon
zstd_decompress
zstd_compress
raid6_pq
libcrc32c
crc32c_generic
bfq
broadcom
bcm_phy_lib
dwc2
xhci_pci
xhci_hcd
udc_core
mdio_bcm_unimac
sdhci_iproc
genet
usbcore
sdhci_pltfm
of_mdio
i2c_bcm2835
usb_common
fixed_phy
sdhci
libphy
gpio_regulator
phy_generic
** Network interface configuration:
*** /etc/network/interfaces:
source-directory /etc/network/interfaces.d
*** /etc/network/interfaces.d/eth0:
auto eth0
iface eth0 inet dhcp
*** /etc/network/interfaces.d/wlan0:
auto wlan0
iface wlan0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default
qlen 1000
link/ether dc:a6:32:bb:99:d9 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
group default qlen 1000
link/ether dc:a6:32:bb:99:da brd ff:ff:ff:ff:ff:ff
inet 192.168.1.9/24 brd 192.168.1.255 scope global wlan0
valid_lft forever preferred_lft forever
inet6 2400:4050:2ba1:ac00:dea6:32ff:febb:99da/64 scope global dynamic
mngtmpaddr noprefixroute
valid_lft 14291sec preferred_lft 12491sec
inet6 fe80::dea6:32ff:febb:99da/64 scope link
valid_lft forever preferred_lft forever
4: lxcbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state
DOWN group default qlen 1000
link/ether 00:16:3e:00:00:00 brd ff:ff:ff:ff:ff:ff
inet 10.0.3.1/24 scope global lxcbr0
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 400 8 0 0 0 0 0 0 400
8 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
wlan0: 1115228 2019 0 0 0 0 0 15 1334626
2164 0 0 0 0 0 0
lxcbr0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
** PCI devices:
00:00.0 PCI bridge [0604]: Broadcom Inc. and subsidiaries Device [14e4:2711]
(rev 10) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00000000-00000fff [size=4K]
Memory behind bridge: f8000000-f80fffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [ac] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s <1us, L1 <2us
ClockPM+ Surprise- LLActRep- BwNot+ ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s (ok), Width x1 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt+
RootCap: CRSVisible+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+
CRSVisible+
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP-
LTR+
10BitTagComp- 10BitTagReq- OBFF Via WAKE#, ExtFmt-
EETLPPrefix-
EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp-
ARIFwd-
AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+
OBFF Disabled, ARIFwd-
AtomicOpsCtl: ReqEn- EgressBlck-
LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer-
2Retimers- DRS+
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-
EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported, DRS-
DownstreamComp: Link Down - Not Determined
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn-
ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
RootCmd: CERptEn+ NFERptEn+ FERptEn+
RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
Capabilities: [180 v1] Vendor Specific Information: ID=0000 Rev=0
Len=028 <?>
Capabilities: [240 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
L1_PM_Substates+
PortCommonModeRestoreTime=8us PortTPowerOnTime=10us
L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
T_CommonMode=1us LTR1.2_Threshold=0ns
L1SubCtl2: T_PwrOn=10us
Kernel driver in use: pcieport
01:00.0 USB controller [0c03]: VIA Technologies, Inc. VL805 USB 3.0 Host
Controller [1106:3483] (rev 01) (prog-if 30 [XHCI])
Subsystem: VIA Technologies, Inc. VL805 USB 3.0 Host Controller
[1106:3483]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 40
Region 0: Memory at 600000000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable- Count=1/4 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [c4] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
SlotPowerLimit 0.000W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+
TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s <2us, L1 <16us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s (ok), Width x1 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range B, TimeoutDis+ NROPrPrP- LTR-
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt-
EETLPPrefix-
EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
FRS- TPHComp- ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
AtomicOpsCtl: ReqEn-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis+
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB,
EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn-
ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Kernel modules: xhci_pci
** USB devices:
not available
-- System Information:
Debian Release: bullseye/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'stable-updates'), (500, 'stable'), (1,
'experimental')
Architecture: arm64 (aarch64)
Kernel: Linux 5.7.0-2-arm64 (SMP w/4 CPU threads)
Kernel taint flags: TAINT_CRAP
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.7.0-2-arm64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.137
ii kmod 27+20200310-2
ii linux-base 4.6
Versions of packages linux-image-5.7.0-2-arm64 recommends:
ii apparmor 2.13.4-3
ii firmware-linux-free 20200122-1
Versions of packages linux-image-5.7.0-2-arm64 suggests:
pn debian-kernel-handbook <none>
pn linux-doc-5.7 <none>
Versions of packages linux-image-5.7.0-2-arm64 is related to:
ii firmware-amd-graphics 20200619-1
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 20200619-1
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20200619-1
ii firmware-misc-nonfree 20200619-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
