Package: src:linux Version: 5.5.17-1 Severity: normal Tags: upstream,fixed-in-experimental
Dear Maintainer, This is a tracking bug for kernel bug #206575 (https://bugzilla.kernel.org/show_bug.cgi?id=206575), which is fixed in experimental. The problem occurs when using AMD graphic cards and amdgpu driver, after doing a suspend-to-ram and resuming, the monitor/screen will stay blank or show no signal. This problem is fixed with the kernel in linux-image-5.6.0-trunk-amd64:5.6.4-1~exp1 Regards, Facundo -- Package-specific info: ** Version: Linux version 5.5.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 9.3.0 (Debian 9.3.0-10)) #1 SMP Debian 5.5.17-1 (2020-04-15) ** Command line: BOOT_IMAGE=/boot/vmlinuz-5.5.0-2-amd64 root=UUID=ac43c144-ff3f-4c08-b24e-b9d76e3d66e2 ro loglevel=8 ** Not tainted ** Kernel log: [ 4.213896] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 4.215770] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18 [ 4.217432] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 4.242801] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input19 [ 4.244655] EDAC amd64: F15h detected (node 0). [ 4.244673] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input20 [ 4.248111] EDAC amd64: Node 0: DRAM ECC disabled. [ 4.248174] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input21 [ 4.252407] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input22 [ 4.254110] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input23 [ 4.254247] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input24 [ 4.254310] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input25 [ 4.254375] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input26 [ 4.258773] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 4.276583] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. [ 4.283634] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 4.283712] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped. [ 4.283785] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 4.283803] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 4.283834] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 4.283875] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 4.285483] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. [ 4.285603] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 4.285678] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped. [ 4.285747] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 4.285766] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 4.285794] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 4.285821] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 4.299166] EDAC amd64: F15h detected (node 0). [ 4.299200] EDAC amd64: Node 0: DRAM ECC disabled. [ 4.348820] EDAC amd64: F15h detected (node 0). [ 4.350210] EDAC amd64: Node 0: DRAM ECC disabled. [ 4.353475] systemd[1]: Started Journal Service. [ 4.364948] systemd-journald[372]: Received client request to flush runtime journal. [ 4.389300] EDAC amd64: F15h detected (node 0). [ 4.392728] EDAC amd64: Node 0: DRAM ECC disabled. [ 4.441325] EDAC amd64: F15h detected (node 0). [ 4.444675] EDAC amd64: Node 0: DRAM ECC disabled. [ 4.693311] EDAC amd64: F15h detected (node 0). [ 4.696690] EDAC amd64: Node 0: DRAM ECC disabled. [ 5.428318] random: crng init done [ 5.430722] random: 7 urandom warning(s) missed due to ratelimiting [ 17.615174] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 17.662418] audit: type=1400 audit(1587587166.554:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=558 comm="apparmor_parser" [ 17.664032] audit: type=1400 audit(1587587166.554:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=560 comm="apparmor_parser" [ 17.666656] audit: type=1400 audit(1587587166.554:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=560 comm="apparmor_parser" [ 17.666698] audit: type=1400 audit(1587587166.558:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=562 comm="apparmor_parser" [ 17.674131] audit: type=1400 audit(1587587166.566:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=563 comm="apparmor_parser" [ 17.674134] audit: type=1400 audit(1587587166.566:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=563 comm="apparmor_parser" [ 17.674137] audit: type=1400 audit(1587587166.566:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=563 comm="apparmor_parser" [ 17.678576] audit: type=1400 audit(1587587166.574:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=568 comm="apparmor_parser" [ 17.681887] audit: type=1400 audit(1587587166.574:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=561 comm="apparmor_parser" [ 17.683414] audit: type=1400 audit(1587587166.574:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=561 comm="apparmor_parser" [ 19.020603] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168f-1.fw [ 19.021878] RTL8211E Gigabit Ethernet r8169-200:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE) [ 19.241965] r8169 0000:02:00.0 enp2s0: Link is Down [ 21.355094] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control off [ 21.358016] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [ 22.027114] fuse: init (API version 7.31) [ 22.535980] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 22.537745] Bridge firewalling registered [ 22.750753] Initializing XFRM netlink socket [ 23.046984] br-a26e2865e9c8: port 1(veth15f07a5) entered blocking state [ 23.046989] br-a26e2865e9c8: port 1(veth15f07a5) entered disabled state [ 23.048410] device veth15f07a5 entered promiscuous mode [ 23.048788] br-a26e2865e9c8: port 1(veth15f07a5) entered blocking state [ 23.048791] br-a26e2865e9c8: port 1(veth15f07a5) entered forwarding state [ 23.048813] IPv6: ADDRCONF(NETDEV_CHANGE): br-a26e2865e9c8: link becomes ready [ 23.048944] br-a26e2865e9c8: port 1(veth15f07a5) entered disabled state [ 23.112872] br-a26e2865e9c8: port 2(veth564478f) entered blocking state [ 23.112877] br-a26e2865e9c8: port 2(veth564478f) entered disabled state [ 23.112954] device veth564478f entered promiscuous mode [ 23.113039] br-a26e2865e9c8: port 2(veth564478f) entered blocking state [ 23.113041] br-a26e2865e9c8: port 2(veth564478f) entered forwarding state [ 23.800410] br-a26e2865e9c8: port 2(veth564478f) entered disabled state [ 23.912851] eth0: renamed from veth690f304 [ 23.942323] eth0: renamed from vethf078a25 [ 23.965246] IPv6: ADDRCONF(NETDEV_CHANGE): veth15f07a5: link becomes ready [ 23.965289] br-a26e2865e9c8: port 1(veth15f07a5) entered blocking state [ 23.965291] br-a26e2865e9c8: port 1(veth15f07a5) entered forwarding state [ 23.965337] IPv6: ADDRCONF(NETDEV_CHANGE): veth564478f: link becomes ready [ 23.965355] br-a26e2865e9c8: port 2(veth564478f) entered blocking state [ 23.965357] br-a26e2865e9c8: port 2(veth564478f) entered forwarding state [ 25.167259] rfkill: input handler disabled [ 29.975591] rfkill: input handler enabled [ 33.739683] rfkill: input handler disabled [ 97.263702] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [ 97.280232] JFS: nTxBlock = 8192, nTxLock = 65536 [ 97.316686] QNX4 filesystem 0.2.3 registered. [ 97.404058] raid6: sse2x4 gen() 8665 MB/s [ 97.472051] raid6: sse2x4 xor() 4640 MB/s [ 97.540045] raid6: sse2x2 gen() 6773 MB/s [ 97.608046] raid6: sse2x2 xor() 4398 MB/s [ 97.676039] raid6: sse2x1 gen() 5256 MB/s [ 97.744034] raid6: sse2x1 xor() 3461 MB/s [ 97.744037] raid6: using algorithm sse2x4 gen() 8665 MB/s [ 97.744038] raid6: .... xor() 4640 MB/s, rmw enabled [ 97.744040] raid6: using ssse3x2 recovery algorithm [ 97.752565] xor: automatically using best checksumming function avx [ 97.837111] Btrfs loaded, crc32c=crc32c-intel ** Model information sys_vendor: To be filled by O.E.M. product_name: To be filled by O.E.M. product_version: To be filled by O.E.M. chassis_vendor: To Be Filled By O.E.M. chassis_version: To Be Filled By O.E.M. bios_vendor: American Megatrends Inc. bios_version: 2501 board_vendor: ASUSTeK COMPUTER INC. board_name: M5A97 R2.0 board_version: Rev 1.xx ** Loaded modules: btrfs blake2b_generic xor zstd_compress raid6_pq zstd_decompress ufs qnx4 hfsplus hfs minix msdos jfs xfs xt_nat xt_tcpudp veth xt_conntrack xt_MASQUERADE nf_conntrack_netlink xfrm_user xfrm_algo nft_counter xt_addrtype nft_compat nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c nf_tables nfnetlink br_netfilter bridge stp llc fuse overlay binfmt_misc dm_crypt nls_ascii edac_mce_amd nls_cp437 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi vfat fat kvm_amd dm_mod snd_hda_intel ccp snd_intel_dspcfg rng_core kvm joydev efi_pstore snd_hda_codec eeepc_wmi asus_wmi battery snd_hda_core sparse_keymap irqbypass rfkill snd_hwdep video snd_pcm sp5100_tco snd_timer wmi_bmof efivars k10temp watchdog sg fam15h_power pcspkr snd soundcore evdev acpi_cpufreq ecryptfs parport_pc ppdev lp parport sunrpc efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic hid_generic usbhid hid sd_mod ohci_pci amdgpu crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel mxm_wmi gpu_sched i2c_algo_bit ttm aesni_intel drm_kms_helper crypto_simd cryptd ahci glue_helper xhci_pci libahci ohci_hcd xhci_hcd drm ehci_pci ehci_hcd libata i2c_piix4 usbcore r8169 scsi_mod realtek libphy usb_common mfd_core wmi button ** PCI devices: 00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge [1002:5a14] (rev 02) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge [1002:5a14] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- NUMA node: 0 Capabilities: <access denied> 00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GFX port 0) [1002:5a16] (prog-if 00 [Normal decode]) DeviceName: Onboard IGD Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 26 NUMA node: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff [size=4K] Memory behind bridge: fea00000-feafffff [size=1M] Prefetchable memory behind bridge: 00000000c0000000-00000000d01fffff [size=258M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 0) [1002:5a18] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 27 NUMA node: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff [size=4K] Memory behind bridge: [disabled] Prefetchable memory behind bridge: 00000000d0300000-00000000d03fffff [size=1M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 1) [1002:5a19] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 28 NUMA node: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: fe900000-fe9fffff [size=1M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:07.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 3) [1002:5a1b] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 29 NUMA node: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: fe800000-fe8fffff [size=1M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. M5A99X EVO (R1.0) SB950 [1043:84dd] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 19 NUMA node: 0 Region 0: I/O ports at f040 [size=8] Region 1: I/O ports at f030 [size=4] Region 2: I/O ports at f020 [size=8] Region 3: I/O ports at f010 [size=4] Region 4: I/O ports at f000 [size=16] Region 5: Memory at feb0b000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 NUMA node: 0 Region 0: Memory at feb0a000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci Kernel modules: ohci_pci 00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 NUMA node: 0 Region 0: Memory at feb09000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 NUMA node: 0 Region 0: Memory at feb08000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci Kernel modules: ohci_pci 00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 21 NUMA node: 0 Region 0: Memory at feb07000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 42) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- NUMA node: 0 Kernel driver in use: piix4_smbus Kernel modules: i2c_piix4, sp5100_tco 00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383] (rev 40) Subsystem: ASUSTeK Computer Inc. SBx00 Azalia (Intel HDA) [1043:8444] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 NUMA node: 0 Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 NUMA node: 0 00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 NUMA node: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=64 I/O behind bridge: [disabled] Memory behind bridge: [disabled] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 NUMA node: 0 Region 0: Memory at feb06000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci Kernel modules: ohci_pci 00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 NUMA node: 0 Region 0: Memory at feb05000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci Kernel modules: ohci_pci 00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 23 NUMA node: 0 Region 0: Memory at feb04000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0 [1022:1600] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- NUMA node: 0 Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1 [1022:1601] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- NUMA node: 0 00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2 [1022:1602] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- NUMA node: 0 00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3 [1022:1603] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- NUMA node: 0 Capabilities: <access denied> Kernel driver in use: k10temp Kernel modules: k10temp 00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4 [1022:1604] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- NUMA node: 0 Kernel driver in use: fam15h_power Kernel modules: fam15h_power 00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5 [1022:1605] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- NUMA node: 0 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Tonga PRO [Radeon R9 285/380] [1002:6939] (rev f1) (prog-if 00 [VGA controller]) Subsystem: PC Partner Limited / Sapphire Technology Radeon R9 380 Nitro 4G D5 [174b:e308] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 49 NUMA node: 0 Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=2M] Region 4: I/O ports at e000 [size=256] Region 5: Memory at fea00000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: amdgpu Kernel modules: amdgpu 01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Tonga HDMI Audio [Radeon R9 285/380] [1002:aad8] Subsystem: PC Partner Limited / Sapphire Technology Radeon R9 285/380 HDMI Audio [174b:aad8] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 51 NUMA node: 0 Region 0: Memory at fea60000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 09) Subsystem: ASUSTeK Computer Inc. P8 series motherboard [1043:8505] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 30 NUMA node: 0 Region 0: I/O ports at d000 [size=256] Region 2: Memory at d0304000 (64-bit, prefetchable) [size=4K] Region 4: Memory at d0300000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 03:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller [1b21:1142] (prog-if 30 [XHCI]) Subsystem: ASUSTeK Computer Inc. ASM1042A USB 3.0 Host Controller [1043:85bf] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 32 NUMA node: 0 Region 0: Memory at fe900000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 04:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller [1b21:1142] (prog-if 30 [XHCI]) Subsystem: ASUSTeK Computer Inc. ASM1042A USB 3.0 Host Controller [1043:85bf] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 40 NUMA node: 0 Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci ** USB devices: Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 003: ID 046d:c31c Logitech, Inc. Keyboard K120 Bus 008 Device 002: ID 046d:c085 Logitech, Inc. G Pro Gaming Mouse Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: bullseye/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.5.0-2-amd64 (SMP w/6 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-5.5.0-2-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.136 ii kmod 27+20200310-2 ii linux-base 4.6 Versions of packages linux-image-5.5.0-2-amd64 recommends: ii apparmor 2.13.4-1+b1 ii firmware-linux-free 20200122-1 Versions of packages linux-image-5.5.0-2-amd64 suggests: pn debian-kernel-handbook <none> ii grub-efi-amd64 2.04-6 pn linux-doc-5.5 <none> Versions of packages linux-image-5.5.0-2-amd64 is related to: ii firmware-amd-graphics 20190717-2 pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux-nonfree 20190717-2 ii firmware-misc-nonfree 20190717-2 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> ii firmware-realtek 20190717-2 pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
