On 10/16/05, Maximilian Attems <[EMAIL PROTECTED]> wrote:
> On Sun, Oct 16, 2005 at 09:49:10PM +0200, Thibaut VARENE wrote:
> <snipp>
>
> ok, for documetentation please post full dmesg of your machine after boot
> and especially the output of lsmod.

there you go:

[EMAIL PROTECTED]:~$ dmesg
Linux version 2.6.12-1-parisc64-smp ([EMAIL PROTECTED]) (gcc version 4.0.2
(Debian 4.0.1-9)) #1 SMP Tue Sep 27 13:23:52 UTC 2005
FP[0] enabled: Rev 1 Model 16
The 64-bit Kernel has started...
Initialized PDC Console for debugging.
Determining PDC firmware type: System Map.
model 00005d40 00000491 00000000 00000002 77ec06ff 100000f0 00000008
000000b2 000000b2
vers  00000301
CPUID vers 17 rev 11 (0x0000022b)
capabilities 0x3
model 9000/785/J6000
Memory Ranges:
 0) Start 0x0000000000000000 End 0x00000000efffffff Size   3840 MB
 1) Start 0x0000000100000000 End 0x00000001ffffffff Size   4096 MB
 2) Start 0x00000010f0000000 End 0x00000010ffffffff Size    256 MB
Total Memory: 8192 MB
initrd: 4fe29000-4ffee000
initrd: reserving 3fe29000-3ffee000 (mem_max 200000000)
On node 0 totalpages: 983040
  DMA zone: 983040 pages, LIFO batch:31
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
On node 1 totalpages: 1048576
  DMA zone: 1048576 pages, LIFO batch:31
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
On node 2 totalpages: 65536
  DMA zone: 65536 pages, LIFO batch:31
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
LCD display at fffffff0f05d0008,fffffff0f05d0000 registered
SMP: bootstrap CPU ID is 0
Built 3 zonelists
Kernel command line: root=/dev/sda3 HOME=/ console=ttyS0 TERM=vt102
palo_kernel=2/vmlinux
PID hash table entries: 4096 (order: 12, 131072 bytes)
Console: colour dummy device 160x64
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Memory: 8388608k available
Calibrating delay loop... 1097.72 BogoMIPS (lpj=548864)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 256
Brought up 1 CPUs
CPU0 attaching sched-domain:
 domain 0: span 00000001
  groups: 00000001
checking if image is initramfs...it isn't (bad gzip magic numbers);
looks like an initrd
NET: Registered protocol family 16
EISA bus registered
Searching for devices...
Found devices:
1. Astro BC Runway Port at 0xfffffffffed00000 [10] { 12, 0x0, 0x582, 0x0000b }
2. Elroy PCI Bridge at 0xfffffffffed30000 [10/0] { 13, 0x0, 0x782, 0x0000a }
3. Elroy PCI Bridge at 0xfffffffffed34000 [10/2] { 13, 0x0, 0x782, 0x0000a }
4. Elroy PCI Bridge at 0xfffffffffed38000 [10/4] { 13, 0x0, 0x782, 0x0000a }
5. Elroy PCI Bridge at 0xfffffffffed3c000 [10/6] { 13, 0x0, 0x782, 0x0000a }
6. Duet W+ at 0xfffffffffffa0000 [32] { 0, 0x0, 0x5d4, 0x00004 }
7. Duet W+ at 0xfffffffffffa2000 [34] { 0, 0x0, 0x5d4, 0x00004 }
8. Memory at 0xfffffffffed10200 [49] { 1, 0x0, 0x00a, 0x00009 }
CPU0 attaching sched-domain:
 domain 0: does not load-balance
Releasing cpu 1 now, hpa=fffffffffffa2000
FP[1] enabled: Rev 1 Model 16
CPU0 attaching sched-domain:
 domain 0: span 00000003
  groups: 00000001 00000002
CPU1 attaching sched-domain:
 domain 0: span 00000003
  groups: 00000002 00000001
CPU(s): 2 x PA8600 (PCX-W+) at 552.000000 MHz
Whole cache flush 315143 cycles, flushing 275015576 bytes 41443791 cycles
Setting cache flush threshold to 1fe900 (2 CPUs online)
SBA found Astro 2.1 at 0xfffffffffed00000
LBA version TR4.0 (0x5) found at 0xfffffffffed30000
PCI: Enabled native mode for NS87415 (pif=0x8f)
LBA version TR4.0 (0x5) found at 0xfffffffffed34000
LBA version TR4.0 (0x5) found at 0xfffffffffed38000
LBA version TR4.0 (0x5) found at 0xfffffffffed3c000
SCSI subsystem initialized
TC classifier action (bugs to netdev@vger.kernel.org cc [EMAIL PROTECTED])
unwind_init: start = 0x10427c40, end = 0x104487d0, entries = 8377
Performance monitoring counters enabled for Duet W+
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x0
Initializing Cryptographic API
SuperIO: Found NS87560 Legacy I/O device at 0000:00:0e.1 (IRQ 68)
SuperIO: Serial port 1 at 0x3f8
SuperIO: Serial port 2 at 0x2f8
SuperIO: Parallel port at 0x378
SuperIO: Floppy controller at 0x3f0
SuperIO: ACPI at 0x7e0
SuperIO: USB regulator enabled
PDC Stable Storage facility v0.09
Soft power switch enabled, polling @ 0xfffffff0f0400804.
STI GSC/PCI core graphics driver Version 0.9a
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 13 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 3) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 32768 buckets, 512Kbytes
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 1812KiB [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: Badness in smp_call_function at
arch/parisc/kernel/smp.c:340
Backtrace:
 [<0000000010114d78>] dump_stack+0x18/0x28
 [<000000001011fe2c>] smp_call_function+0x394/0x3a0
 [<0000000010114044>] flush_data_cache+0x34/0x60
 [<0000000010113550>] free_initmem+0x90/0x350
 [<0000000010112334>] init+0x854/0x8b8
 [<000000001010647c>] ret_from_kernel_thread+0x24/0x40

412k freed
sym0: <896> rev 0x4 at pci 0000:00:0f.0 irq 69
sym0: PA-RISC Firmware, ID 7, Fast-40, LVD, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.2.1
sym1: <896> rev 0x4 at pci 0000:00:0f.1 irq 69
sym1: PA-RISC Firmware, ID 7, Fast-40, LVD, parity checking
sym1: SCSI BUS has been reset.
scsi1 : sym-2.2.1
  Vendor: SEAGATE   Model: ST336704LC        Rev: HP00
  Type:   Direct-Access                      ANSI SCSI revision: 03
 target1:0:5: tagged command queuing enabled, command queue depth 16.
 target1:0:5: Beginning Domain Validation
 target1:0:5: asynchronous.
WIDTH IS 1
 target1:0:5: wide asynchronous.
 target1:0:5: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
 target1:0:5: Ending Domain Validation
  Vendor: SEAGATE   Model: ST318451LC        Rev: HP01
  Type:   Direct-Access                      ANSI SCSI revision: 03
 target1:0:6: tagged command queuing enabled, command queue depth 16.
 target1:0:6: Beginning Domain Validation
 target1:0:6: asynchronous.
WIDTH IS 1
 target1:0:6: wide asynchronous.
 target1:0:6: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
 target1:0:6: Ending Domain Validation
SCSI device sda: 71132960 512-byte hdwr sectors (36420 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 71132960 512-byte hdwr sectors (36420 MB)
SCSI device sda: drive cache: write back
 /dev/scsi/host1/bus0/target5/lun0: p1 p2 p3 p4
Attached scsi disk sda at scsi1, channel 0, id 5, lun 0
SCSI device sdb: 35566480 512-byte hdwr sectors (18210 MB)
SCSI device sdb: drive cache: write through
SCSI device sdb: 35566480 512-byte hdwr sectors (18210 MB)
SCSI device sdb: drive cache: write through
 /dev/scsi/host1/bus0/target6/lun0: p1
Attached scsi disk sdb at scsi1, channel 0, id 6, lun 0
VFS: Can't find ext3 filesystem on dev sda3.
VFS: Can't find an ext2 filesystem on dev sda3.
SGI XFS with large block/inode numbers, no debug enabled
XFS mounting filesystem sda3
Ending clean XFS mount for filesystem: sda3
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Linux Tulip driver version 1.1.13 (December 15, 2004)
tulip0: no phy info, aborting mtable build
tulip0:  MII transceiver #1 config 1000 status 782d advertising 01e1.
eth0: Digital DS21142/DS21143 Tulip rev 65 at 8000000000001000,
00:10:83:FF:27:6B, IRQ 66.
tulip1:  EEPROM default media type Autosense.
tulip1:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip1:  MII transceiver #1 config 3100 status 7849 advertising 0101.
tulip1:  Advertising 01e1 on PHY 1, previously advertising 0101.
eth1: Digital DS21142/DS21143 Tulip rev 65 at 8000000000028000,
00:10:83:F6:3E:C2, IRQ 70.
snd: Unknown symbol dma_spin_lock
snd_timer: Unknown symbol snd_info_register
snd_timer: Unknown symbol snd_info_create_module_entry
snd_timer: Unknown symbol snd_info_free_entry
snd_timer: Unknown symbol snd_iprintf
snd_timer: Unknown symbol snd_ecards_limit
snd_timer: Unknown symbol snd_oss_info_register
snd_timer: Unknown symbol snd_unregister_device
snd_timer: Unknown symbol snd_device_new
snd_timer: Unknown symbol snd_kmalloc_strdup
snd_timer: Unknown symbol snd_info_unregister
snd_timer: Unknown symbol snd_register_device
snd_pcm: Unknown symbol snd_info_register
snd_pcm: Unknown symbol snd_info_create_module_entry
snd_pcm: Unknown symbol snd_ctl_unregister_ioctl_compat
snd_pcm: Unknown symbol snd_timer_notify
snd_pcm: Unknown symbol snd_timer_interrupt
snd_pcm: Unknown symbol snd_info_free_entry
snd_pcm: Unknown symbol snd_info_get_str
snd_pcm: Unknown symbol snd_ctl_register_ioctl
snd_pcm: Unknown symbol snd_card_file_add
snd_pcm: Unknown symbol snd_iprintf
snd_pcm: Unknown symbol snd_major
snd_pcm: Unknown symbol snd_unregister_device
snd_pcm: Unknown symbol snd_timer_new
snd_pcm: Unknown symbol snd_device_new
snd_pcm: Unknown symbol snd_ctl_unregister_ioctl
snd_pcm: Unknown symbol snd_ctl_register_ioctl_compat
snd_pcm: Unknown symbol snd_info_create_card_entry
snd_pcm: Unknown symbol snd_device_free
snd_pcm: Unknown symbol snd_card_file_remove
snd_pcm: Unknown symbol snd_info_unregister
snd_pcm: Unknown symbol snd_device_register
snd_pcm: Unknown symbol snd_register_device
snd_pcm: Unknown symbol snd_info_get_line
snd_ac97_codec: Unknown symbol snd_info_register
snd_ac97_codec: Unknown symbol snd_ctl_add
snd_ac97_codec: Unknown symbol snd_info_free_entry
snd_ac97_codec: Unknown symbol snd_interval_refine
snd_ac97_codec: Unknown symbol snd_ctl_find_id
snd_ac97_codec: Unknown symbol snd_ctl_new1
snd_ac97_codec: Unknown symbol snd_ctl_remove_id
snd_ac97_codec: Unknown symbol snd_component_add
snd_ac97_codec: Unknown symbol snd_pcm_hw_rule_add
snd_ac97_codec: Unknown symbol snd_iprintf
snd_ac97_codec: Unknown symbol snd_device_new
snd_ac97_codec: Unknown symbol snd_info_create_card_entry
snd_ac97_codec: Unknown symbol snd_info_unregister
snd_ad1889: Unknown symbol snd_pcm_new
snd_ad1889: Unknown symbol snd_card_register
snd_ad1889: Unknown symbol snd_card_free
snd_ad1889: Unknown symbol snd_pcm_lib_preallocate_pages_for_all
snd_ad1889: Unknown symbol snd_card_proc_new
snd_ad1889: Unknown symbol snd_ac97_mixer
snd_ad1889: Unknown symbol snd_ac97_bus
snd_ad1889: Unknown symbol snd_card_new
snd_ad1889: Unknown symbol snd_iprintf
snd_ad1889: Unknown symbol snd_pcm_lib_malloc_pages
snd_ad1889: Unknown symbol snd_pcm_lib_ioctl
snd_ad1889: Unknown symbol snd_pcm_lib_free_pages
snd_ad1889: Unknown symbol snd_pcm_set_ops
snd_ad1889: Unknown symbol snd_device_new
snd_ad1889: Unknown symbol snd_pcm_lib_preallocate_free_for_all
snd_ad1889: Unknown symbol snd_pcm_period_elapsed
snd_ad1889: Unknown symbol snd_ac97_tune_hardware
snd_ad1889: Unknown symbol snd_pcm_format_width
NS87415: IDE controller at PCI slot 0000:00:0e.0
NS87415: chipset revision 3
NS87415: 100% native mode on irq 7
    ide0: BM-DMA at 0x0a00-0x0a07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0x0a08-0x0a0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: CD-224E, ATAPI CD/DVD-ROM drive
ide0 at 0xf00-0xf07,0xe02 on irq 7
hda: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
Probing IDE interface ide1...
usbcore: registered new driver hub
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 80 td 96
ohci_hcd 0000:00:0e.2: National Semiconductor Corporation USB Controller
ohci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0e.2: irq 1, io mem 0xfffffffff4007000
ohci_hcd 0000:00:0e.2: Using NSC SuperIO setup
ohci_hcd 0000:00:0e.2: resetting from state 'reset', control = 0x0
ohci_hcd 0000:00:0e.2: OHCI controller state
ohci_hcd 0000:00:0e.2: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:0e.2: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:00:0e.2: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:0e.2: intrstatus 0x00000000
ohci_hcd 0000:00:0e.2: intrenable 0x8000001a MIE UE RD WDH
ohci_hcd 0000:00:0e.2: fminterval a7782edf
ohci_hcd 0000:00:0e.2: hcca frame #0000
ohci_hcd 0000:00:0e.2: roothub.a 00001003 POTPGT=0 NOCP NDP=3
ohci_hcd 0000:00:0e.2: roothub.b 000e0000 PPCM=000e DR=0000
ohci_hcd 0000:00:0e.2: roothub.status 00008000 DRWE
ohci_hcd 0000:00:0e.2: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:0e.2: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:0e.2: roothub.portstatus [2] 0x00000100 PPS
usb usb1: default language 0x0409
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: National Semiconductor Corporation USB Controller
usb usb1: Manufacturer: Linux 2.6.12-1-parisc64-smp ohci_hcd
usb usb1: SerialNumber: 0000:00:0e.2
usb usb1: hotplug
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: hotplug
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: ganged power switching
hub 1-0:1.0: no over-current protection
hub 1-0:1.0: power on to power good time: 0ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: enabling power on all ports
ohci_hcd 0000:00:0e.2: created debug files
hub 1-0:1.0: state 5 ports 3 chg 0000 evt 0000
ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
NET: Registered protocol family 10
Disabled Privacy Extensions on device 00000000104e30c0(lo)
IPv6 over IPv4 tunneling driver

[EMAIL PROTECTED]:~$ lsmod
Module                  Size  Used by
ipv6                  552936  74
ehci_hcd               83208  0
ohci_hcd               57540  0
usbcore               185584  2 ehci_hcd,ohci_hcd
ns87415                10432  0 [permanent]
soundcore              19272  0
snd_page_alloc         21704  0
tulip                 103304  0
lasi_82596             50536  0
ide_generic             3840  0 [permanent]
ide_disk               34688  0
ide_cd                 72712  0
cdrom                  69032  1 ide_cd
ide_core              218832  4 ns87415,ide_generic,ide_disk,ide_cd
xfs                   817872  1
exportfs               14656  1 xfs
ext3                  267088  0
jbd                   140720  1 ext3
sd_mod                 33984  3
zalon7xx               64288  0
lasi700                 7424  0
53c700                 54096  1 lasi700
sym53c8xx             137896  2

[EMAIL PROTECTED]:~$ lspci
0000:00:0c.0 Ethernet controller: Digital Equipment Corporation
DECchip 21142/43 (rev 41)
0000:00:0d.0 Multimedia audio controller: Analog Devices AD1889 sound chip
0000:00:0e.0 IDE interface: National Semiconductor Corporation
87415/87560 IDE (rev 03)
0000:00:0e.1 Bridge: National Semiconductor Corporation 87560 Legacy
I/O (rev 01)
0000:00:0e.2 USB Controller: National Semiconductor Corporation USB
Controller (rev 02)
0000:00:0f.0 SCSI storage controller: LSI Logic / Symbios Logic
53C896/897 (rev 04)
0000:00:0f.1 SCSI storage controller: LSI Logic / Symbios Logic
53C896/897 (rev 04)
0000:02:02.0 Ethernet controller: Digital Equipment Corporation
DECchip 21142/43 (rev 41)
0000:03:03.0 Ethernet controller: Alteon Networks Inc. AceNIC Gigabit
Ethernet (rev 01)

> there will be soon a 2.6.14 in exeperimental, would be cool to check
> that too before bugging alsa upstream.

I highly doubt this is an alsa-upstream bug. I wrote this driver,
which didn't make it into upstream until 2.6.14-rc2, so it looks much
more to me like a backport problem.

this is what it looks like when it actually works:

[EMAIL PROTECTED]:~$ uname -a
Linux Esperanza 2.6.14-rc5-pa1 #13 SMP Fri Oct 21 14:27:21 CEST 2005
parisc64 GNU/Linux

in dmesg:
[snd_ad1889_ac97_ready] ready after 351 ms
ac97 quirk for AD1889 (11d4:1889)

[EMAIL PROTECTED]:~$ lsmod
Module                  Size  Used by
snd_ad1889             27656  0
snd_ac97_codec        200280  1 snd_ad1889
snd_pcm               170888  2 snd_ad1889,snd_ac97_codec
snd_page_alloc         19344  1 snd_pcm
snd_ac97_bus            3072  1 snd_ac97_codec
snd_opl3_lib           19456  1 snd_ad1889
snd_seq_device         16656  1 snd_opl3_lib
snd_timer              45384  2 snd_pcm,snd_opl3_lib
snd_hwdep              16904  1 snd_opl3_lib
snd                   107104  7
snd_ad1889,snd_ac97_codec,snd_pcm,snd_opl3_lib,snd_seq_device,snd_timer,snd_hwdep
soundcore              14088  1 snd

HTH

T-Bone

Reply via email to