Your message dated Tue, 31 Dec 2019 17:05:25 +0000
with message-id <094958094311ae3531421cb1862c66524d0be2f1.ca...@decadent.org.uk>
and subject line Re: Bug#947801: linux-image-5.3.0-3-amd64: b44 module unable
to dma to address
has caused the Debian Bug report #947801,
regarding linux-image-5.3.0-3-amd64: b44 module unable to dma to address
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
947801: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=947801
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 5.3.15-1
Severity: normal
Dear Maintainer,
* What led up to the situation?
Had been having lockup with swiotlb getting overloaded, added
iommu=force, intel_iommu=on, swiotlb=noforce to fix. Have reduced
the swiotlb lockup, but now get a freeze on system with the b44 DMA
below
* What exactly did you do (or not do) that was effective (or
ineffective)?
Attempting to figure out b44 parametrs to get DMA to work, searched
with google on how to overcome DMA issues
* What was the outcome of this action? no luck
* What outcome did you expect instead? Reduce DMA issues, stop
freezes of system
-- Package-specific info:
** Version:
Linux version 5.3.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 9.2.1
20191130 (Debian 9.2.1-21)) #1 SMP Debian 5.3.15-1 (2019-12-07)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-5.3.0-3-amd64
root=UUID=f0a976b0-b2fa-418b-bdf5-d1666e3c05fb ro iommu=force intel_iommu=on
swiotlb=noforce quiet
** Tainted: W (512)
* Taint on warning.
** Kernel log:
[ 321.030640] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7f802
[ 325.970842] swiotlb_map: 681 callbacks suppressed
[ 325.970851] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7f802
[ 325.978046] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e78002
[ 325.985252] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e78002
[ 325.992504] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7f802
[ 325.999757] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7c002
[ 326.007003] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7e002
[ 326.014247] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7b002
[ 326.021437] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e79002
[ 326.028655] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7d002
[ 326.035878] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7e802
[ 330.976083] swiotlb_map: 681 callbacks suppressed
[ 330.976092] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7f802
[ 330.983295] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7c002
[ 330.990535] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7e002
[ 330.997751] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7b002
[ 331.005015] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e79002
[ 331.012209] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7d002
[ 331.019415] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7e802
[ 331.026683] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7c802
[ 331.033945] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7c802
[ 331.041102] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7e802
[ 335.981437] swiotlb_map: 681 callbacks suppressed
[ 335.981446] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7d002
[ 335.988568] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7e802
[ 335.995770] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7c802
[ 336.010229] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7c802
[ 336.017460] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7e802
[ 336.024678] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7d002
[ 336.031882] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e79002
[ 336.039114] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7b002
[ 336.046375] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7e002
[ 336.053610] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7c002
[ 340.986518] swiotlb_map: 680 callbacks suppressed
[ 340.986527] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7d002
[ 340.993788] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e79002
[ 341.000963] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7b002
[ 341.008251] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7e002
[ 341.015466] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7c002
[ 341.022652] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7f802
[ 341.029887] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e78002
[ 341.037124] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e78002
[ 341.044388] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7f802
[ 341.051624] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7c002
[ 345.991870] swiotlb_map: 681 callbacks suppressed
[ 345.991880] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e78002
[ 345.999000] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e78002
[ 346.006239] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7f802
[ 346.013465] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7c002
[ 346.020694] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7e002
[ 346.027896] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7b002
[ 346.035155] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e79002
[ 346.042374] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7d002
[ 346.049603] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7e802
[ 346.056822] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7c802
[ 350.997119] swiotlb_map: 681 callbacks suppressed
[ 350.997127] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e79002
[ 351.004272] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7d002
[ 351.011448] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7e802
[ 351.018642] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7c802
[ 351.025888] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7c802
[ 351.033127] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7e802
[ 351.040355] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7d002
[ 351.047587] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e79002
[ 351.054861] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7b002
[ 351.062085] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7e002
[ 356.002344] swiotlb_map: 681 callbacks suppressed
[ 356.002353] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7e802
[ 356.009461] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7d002
[ 356.016666] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e79002
[ 356.023876] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7b002
[ 356.031099] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7e002
[ 356.038407] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7c002
[ 356.045622] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7f802
[ 356.052827] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e78002
[ 356.060092] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e78002
[ 356.067331] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7f802
[ 361.007580] swiotlb_map: 682 callbacks suppressed
[ 361.007590] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7c002
[ 361.014745] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7f802
[ 361.021962] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e78002
[ 361.029118] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e78002
[ 361.036350] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7f802
[ 361.043585] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7c002
[ 361.050811] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7e002
[ 361.058044] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7b002
[ 361.065327] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e79002
[ 361.072531] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7d002
[ 366.012722] swiotlb_map: 684 callbacks suppressed
[ 366.012731] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7e002
[ 366.019969] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7b002
[ 366.027139] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e79002
[ 366.034396] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7d002
[ 366.041585] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7e802
[ 366.048819] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7c802
[ 366.056078] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7c802
[ 366.063297] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7e802
[ 366.070562] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e7d002
[ 366.077794] b44 0000:03:00.0: Cannot do DMA to address 0x00000000c3e79002
** Model information
sys_vendor: Dell Inc.
product_name: MP061
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A10
board_vendor: Dell Inc.
board_name: 0WX414
board_version:
** Loaded modules:
psnap
llc
cpufreq_userspace
cpufreq_powersave
cpufreq_conservative
uinput
b43
cordic
bcma
snd_hda_codec_hdmi
mac80211
coretemp
snd_hda_codec_idt
kvm_intel
snd_hda_codec_generic
kvm
cfg80211
dell_laptop
ledtrig_audio
irqbypass
dell_smm_hwmon
snd_hda_intel
r852
r592
iTCO_wdt
rfkill
libarc4
iTCO_vendor_support
dell_wmi
dell_smbios
memstick
sm_common
nand
snd_hda_codec
joydev
nand_ecc
bch
nandcore
snd_hda_core
watchdog
snd_hwdep
mtd
dcdbas
pcspkr
serio_raw
dell_wmi_descriptor
sparse_keymap
snd_pcm
wmi_bmof
sg
snd_timer
evdev
snd
soundcore
rng_core
battery
acpi_cpufreq
ac
binfmt_misc
firewire_sbp2
parport_pc
ppdev
lp
parport
ip_tables
x_tables
autofs4
hid_generic
usbhid
hid
ext4
crc16
mbcache
jbd2
crc32c_generic
sr_mod
cdrom
sd_mod
ata_generic
radeon
b44
i2c_algo_bit
ttm
drm_kms_helper
ata_piix
libata
uhci_hcd
ehci_pci
ehci_hcd
sdhci_pci
ssb
drm
cqhci
sdhci
firewire_ohci
usbcore
firewire_core
scsi_mod
psmouse
mmc_core
i2c_i801
mii
lpc_ich
mfd_core
crc_itu_t
libphy
usb_common
pcmcia
pcmcia_core
wmi
button
video
** Network interface configuration:
*** /etc/network/interfaces:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
group default qlen 1000
link/ether 00:18:8b:da:af:19 brd ff:ff:ff:ff:ff:ff
inet 10.10.1.165/24 brd 10.10.1.255 scope global dynamic noprefixroute eth0
valid_lft 86140sec preferred_lft 86140sec
inet6 fe80::218:8bff:feda:af19/64 scope link noprefixroute
valid_lft forever preferred_lft forever
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN
group default qlen 1000
link/ether 02:f6:ee:68:42:8c brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
wlan0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
eth0: 101151 414 0 0 0 0 0 351 41621587
31325 0 0 0 0 0 0
lo: 16709 49 0 0 0 0 0 0 16709
49 0 0 0 0 0 0
*** Protocol statistics:
Ip:
Forwarding: 2
31434 total packets received
1 with invalid addresses
0 forwarded
0 incoming packets discarded
31433 incoming packets delivered
31346 requests sent out
82 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
3 active connection openings
0 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
34 segments received
45 segments sent out
0 segments retransmitted
0 bad segments received
6 resets sent
Udp:
31399 packets received
0 packets to unknown port received
0 packet receive errors
31295 packets sent
0 receive buffer errors
0 send buffer errors
UdpLite:
TcpExt:
13 packet headers predicted
6 acknowledgments not containing data payload received
2 predicted acknowledgments
3 connections reset due to unexpected data
TCPRcvCoalesce: 9
TCPOrigDataSent: 14
TCPDelivered: 17
IpExt:
InMcastPkts: 31375
OutMcastPkts: 31277
InOctets: 41224239
OutOctets: 41165432
InMcastOctets: 41202918
OutMcastOctets: 41158070
InNoECTPkts: 31434
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Dell Mobile 945GM/PM/GMS, 943/940GML and 945GT Express
Memory Controller Hub [1028:01cd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
and 945GT Express PCI Express Root Port [8086:27a1] (rev 03) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff [size=4K]
Memory behind bridge: efd00000-efefffff [size=2M]
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
[size=256M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition
Audio Controller [8086:27d8] (rev 01)
Subsystem: Dell NM10/ICH7 Family High Definition Audio Controller
[1028:01cd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at efffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port
1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 00002000-00002fff [size=4K]
Memory behind bridge: e0200000-e03fffff [size=2M]
Prefetchable memory behind bridge: 00000000e0400000-00000000e05fffff
[size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port
2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 26
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 00003000-00003fff [size=4K]
Memory behind bridge: efc00000-efcfffff [size=1M]
Prefetchable memory behind bridge: 00000000e0600000-00000000e07fffff
[size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port
4 [8086:27d6] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 27
Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=0
I/O behind bridge: 0000d000-0000dfff [size=4K]
Memory behind bridge: efa00000-efbfffff [size=2M]
Prefetchable memory behind bridge: 00000000e0000000-00000000e01fffff
[size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell NM10/ICH7 Family USB UHCI Controller [1028:01cd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at bf80 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell NM10/ICH7 Family USB UHCI Controller [1028:01cd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at bf60 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell NM10/ICH7 Family USB UHCI Controller [1028:01cd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at bf40 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell NM10/ICH7 Family USB UHCI Controller [1028:01cd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 4: I/O ports at bf20 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI
Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Dell NM10/ICH7 Family USB2 EHCI Controller [1028:01cd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at ffa80000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: None
Memory behind bridge: ef900000-ef9fffff [size=1M]
Prefetchable memory behind bridge: None
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge [8086:27b9] (rev 01)
Subsystem: Dell 82801GBM (ICH7-M) LPC Interface Bridge [1028:01cd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: intel_rng, lpc_ich, leds_ss4200
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7-M Family)
SATA Controller [IDE mode] [8086:27c4] (rev 01) (prog-if 80 [ISA Compatibility
mode-only controller, supports bus mastering])
Subsystem: Dell 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode]
[1028:01cd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at bfa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller
[8086:27da] (rev 01)
Subsystem: Dell NM10/ICH7 Family SMBus Controller [1028:01cd]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 10c0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] RV515/M54 [Mobility Radeon X1400] [1002:7145] (prog-if 00 [VGA
controller])
Subsystem: Dell RV515/M54 [Mobility Radeon X1400] [1028:2002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at ee00 [size=256]
Region 2: Memory at efdf0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon
03:00.0 Ethernet controller [0200]: Broadcom Inc. and subsidiaries BCM4401-B0
100Base-TX [14e4:170c] (rev 02)
Subsystem: Dell Inspiron 9400 Laptop [1028:01cd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 17
Region 0: Memory at ef9fe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: b44
Kernel modules: b44
03:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller
[1180:0832] (prog-if 10 [OHCI])
Subsystem: Dell R5C832 IEEE 1394 Controller [1028:01cd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: Memory at ef9fd800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
03:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro
Host Adapter [1180:0822] (rev 19) (prog-if 01)
Subsystem: Dell R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1028:01cd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 18
Region 0: Memory at ef9fd500 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci
03:01.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host
Adapter [1180:0592] (rev 0a)
Subsystem: Dell R5C592 Memory Stick Bus Host Adapter [1028:01cd]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: Memory at ef9fd600 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: r592
Kernel modules: r592
03:01.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller
[1180:0852] (rev 05)
Subsystem: Dell xD-Picture Card Controller [1028:01cd]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: Memory at ef9fd700 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: r852
Kernel modules: r852
0c:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM4311
802.11b/g WLAN [14e4:4311] (rev 01)
Subsystem: Dell Wireless 1390 WLAN Mini-Card [1028:0007]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at efcfc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
** USB devices:
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 04e6:5116 SCM Microsystems, Inc. SCR331-LC1 / SCR3310
SmartCard Reader
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 047d:1077 Kensington SlimBlade Presenter Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: bullseye/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 5.3.0-3-amd64 (SMP w/2 CPU cores)
Kernel taint flags: TAINT_WARN
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8),
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.3.0-3-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.135
ii kmod 26-3
ii linux-base 4.6
Versions of packages linux-image-5.3.0-3-amd64 recommends:
ii apparmor 2.13.3-7
ii firmware-linux-free 3.4
Versions of packages linux-image-5.3.0-3-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.04-4
pn linux-doc-5.3 <none>
Versions of packages linux-image-5.3.0-3-amd64 is related to:
ii firmware-amd-graphics 20190717-2
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---
--- Begin Message ---
On Mon, 2019-12-30 at 18:11 -0500, Jeffry J. Smith wrote:
> Package: src:linux
> Version: 5.3.15-1
> Severity: normal
>
> Dear Maintainer,
>
>
> * What led up to the situation?
> Had been having lockup with swiotlb getting overloaded, added
> iommu=force, intel_iommu=on, swiotlb=noforce to fix. Have reduced
> the swiotlb lockup, but now get a freeze on system with the b44 DMA
> below
[...]
This is the expected result if you use swiotlb=noforce.
Ben.
--
Ben Hutchings
Experience is what causes a person to make new mistakes
instead of old ones.
signature.asc
Description: This is a digitally signed message part
--- End Message ---
