Package: src:linux
Version: 5.2.9-2
Severity: normal
Hello,
How to reproduce:
1. set up zram with mem_limit that we can hit, like 10MB or so
2. get system to start swapping there, for example put a large random file in
tmpfs and attempt to lock large portion of memory with memtester
System freezes with swap write errors
If we do not set mem_limit then that process gets killed by OOM just fine.
My guess is that the way mem_limit works by denying swap writes is somehow
blocking Linux OOM triggers?
Thanks
-- Package-specific info:
** Version:
Linux version 5.2.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0
(Debian 8.3.0-21)) #1 SMP Debian 5.2.9-2 (2019-08-21)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-5.2.0-2-amd64
root=UUID=a548c59c-2eb5-451a-86a6-50e11befaed1 ro quiet
** Not tainted
** Kernel log:
** Model information
[ 1.692152] scsi host6: ahci
[ 1.692308] scsi host7: ahci
[ 1.692448] ata3: SATA max UDMA/133 abar m4096@0xfc032000 port 0xfc032100
irq 24
[ 1.692457] ata4: SATA max UDMA/133 abar m4096@0xfc032000 port 0xfc032180
irq 24
[ 1.692465] ata5: SATA max UDMA/133 abar m4096@0xfc032000 port 0xfc032200
irq 24
[ 1.692531] ata6: SATA max UDMA/133 abar m4096@0xfc032000 port 0xfc032280
irq 24
[ 1.692539] ata7: SATA max UDMA/133 abar m4096@0xfc032000 port 0xfc032300
irq 24
[ 1.692547] ata8: SATA max UDMA/133 abar m4096@0xfc032000 port 0xfc032380
irq 24
[ 1.692879] PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 1.692934] virtio-pci 0000:00:06.0: virtio_pci: leaving for legacy driver
[ 1.693926] virtio-pci 0000:00:07.0: virtio_pci: leaving for legacy driver
[ 1.697127] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.697394] PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 1.700614] 8139cp 0000:00:05.0 eth0: RTL-8139C+ at 0x(____ptrval____),
52:54:00:88:e3:90, IRQ 11
[ 1.703679] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.708829] ACPI: bus type USB registered
[ 1.708856] usbcore: registered new interface driver usbfs
[ 1.708864] usbcore: registered new interface driver hub
[ 1.708901] usbcore: registered new device driver usb
[ 1.714140] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.717706] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.717935] input: VirtualPS/2 VMware VMMouse as
/devices/platform/i8042/serio1/input/input3
[ 1.718850] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 1.718857] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus
number 1
[ 1.718881] uhci_hcd 0000:00:01.2: detected 2 ports
[ 1.718994] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c140
[ 1.719130] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 5.02
[ 1.719131] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.719132] usb usb1: Product: UHCI Host Controller
[ 1.719133] usb usb1: Manufacturer: Linux 5.2.0-2-amd64 uhci_hcd
[ 1.719134] usb usb1: SerialNumber: 0000:00:01.2
[ 1.719224] hub 1-0:1.0: USB hub found
[ 1.719231] hub 1-0:1.0: 2 ports detected
[ 1.719980] input: VirtualPS/2 VMware VMMouse as
/devices/platform/i8042/serio1/input/input2
[ 1.769811] 8139cp 0000:00:05.0 ens5: renamed from eth0
[ 1.772491] virtio_blk virtio2: [vda] 41943040 512-byte logical blocks (21.5
GB/20.0 GiB)
[ 1.773342] vda: vda1 vda2 < vda5 >
[ 1.850666] ata2.01: NODEV after polling detection
[ 1.851145] ata2.00: ATAPI: QEMU DVD-ROM, 1.1.0, max UDMA/100
[ 1.853302] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 1.1.
PQ: 0 ANSI: 5
[ 2.007014] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.007259] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.010040] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.010273] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.010509] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.010766] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.050873] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[ 2.066596] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 2.066600] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.067790] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.245049] usb 1-1: New USB device found, idVendor=0409, idProduct=55aa,
bcdDevice= 1.01
[ 2.245051] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.245053] usb 1-1: Product: QEMU USB Hub
[ 2.245055] usb 1-1: Manufacturer: QEMU
[ 2.245056] usb 1-1: SerialNumber: 314159-0000:00:01.2-1
[ 2.247134] hub 1-1:1.0: USB hub found
[ 2.248097] hub 1-1:1.0: 8 ports detected
[ 2.374200] PM: Image not found (code -22)
[ 2.461671] random: fast init done
[ 2.550868] usb 1-1.1: new full-speed USB device number 3 using uhci_hcd
[ 2.610429] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts:
(null)
[ 2.699975] usb 1-1.1: New USB device found, idVendor=0627, idProduct=0001,
bcdDevice= 0.00
[ 2.699978] usb 1-1.1: New USB device strings: Mfr=1, Product=3,
SerialNumber=5
[ 2.699980] usb 1-1.1: Product: QEMU USB Tablet
[ 2.699981] usb 1-1.1: Manufacturer: QEMU
[ 2.699982] usb 1-1.1: SerialNumber: 42
[ 2.777442] Not activating Mandatory Access Control as /sbin/tomoyo-init
does not exist.
[ 2.842635] systemd[1]: Inserted module 'autofs4'
[ 2.868199] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS
+ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2
default-hierarchy=hybrid)
[ 2.868284] systemd[1]: Detected virtualization kvm.
[ 2.868305] systemd[1]: Detected architecture x86-64.
[ 2.877819] systemd[1]: Set hostname to <debian>.
[ 2.878913] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid
argument
[ 3.149021] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.149050] systemd[1]: Reached target Remote File Systems.
[ 3.149321] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.149549] systemd[1]: Listening on Journal Audit Socket.
[ 3.149578] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.149812] systemd[1]: Listening on Syslog Socket.
[ 3.150096] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.153145] systemd[1]: Created slice system-getty.slice.
[ 3.333273] EXT4-fs (vda1): re-mounted. Opts: errors=remount-ro
[ 3.761893] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 3.761946] ACPI: Power Button [PWRF]
[ 3.873637] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 3.930395] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 3.979186] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.067012] usbcore: registered new interface driver usbhid
[ 4.067014] usbhid: USB HID core driver
[ 4.180758] [drm:qxl_pci_probe [qxl]] *ERROR* qxl too old, doesn't support
client_monitors_config, use xf86-video-qxl in user mode
[ 4.180762] qxl: probe of 0000:00:02.0 failed with error -22
[ 4.194210] input: QEMU QEMU USB Tablet as
/devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1.1/1-1.1:1.0/0003:0627:0001.0001/input/input6
[ 4.194324] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01
Pointer [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1.1/input0
[ 4.284599] audit: type=1400 audit(1568318051.420:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="lsb_release" pid=281
comm="apparmor_parser"
[ 4.285345] audit: type=1400 audit(1568318051.420:3): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=282
comm="apparmor_parser"
[ 4.285347] audit: type=1400 audit(1568318051.420:4): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod"
pid=282 comm="apparmor_parser"
[ 4.635785] systemd-journald[217]: Received request to flush runtime journal
from PID 1
[ 4.730211] 8139cp 0000:00:05.0 ens5: link up, 100Mbps, full-duplex, lpa
0x05E1
[ 45.711074] random: crng init done
[ 45.711089] random: 7 urandom warning(s) missed due to ratelimiting
sys_vendor: Bochs
product_name: Bochs
product_version:
chassis_vendor: Bochs
chassis_version:
bios_vendor: Bochs
bios_version: Bochs
** Loaded modules:
hid_generic
qxl
ttm
drm_kms_helper
usbhid
drm
hid
joydev
pcspkr
virtio_balloon
virtio_console
serio_raw
sg
evdev
button
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
sr_mod
cdrom
ata_generic
virtio_blk
uhci_hcd
ehci_hcd
psmouse
usbcore
8139too
8139cp
mii
virtio_pci
virtio_ring
virtio
ahci
libahci
ata_piix
i2c_piix4
libata
usb_common
scsi_mod
floppy
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma]
[8086:1237] (rev 02)
Subsystem: Red Hat, Inc. Qemu virtual machine [1af4:1100]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton
II] [8086:7000]
Subsystem: Red Hat, Inc. Qemu virtual machine [1af4:1100]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.1 IDE interface [0101]: Intel Corporation 82371SB PIIX3 IDE
[Natoma/Triton II] [8086:7010] (prog-if 80 [ISA Compatibility mode-only
controller, supports bus mastering])
Subsystem: Red Hat, Inc. Qemu virtual machine [1af4:1100]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
Region 4: I/O ports at c1e0 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
00:01.2 USB controller [0c03]: Intel Corporation 82371SB PIIX3 USB
[Natoma/Triton II] [8086:7020] (rev 01) (prog-if 00 [UHCI])
Subsystem: Red Hat, Inc. QEMU Virtual Machine [1af4:1100]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at c140 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:01.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113]
(rev 03)
Subsystem: Red Hat, Inc. Qemu virtual machine [1af4:1100]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 9
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4
00:02.0 VGA compatible controller [0300]: Red Hat, Inc. QXL paravirtual graphic
card [1b36:0100] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Red Hat, Inc. QEMU Virtual Machine [1af4:1100]
Physical Slot: 2
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=64M]
Region 1: Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
Region 2: Memory at fc030000 (32-bit, non-prefetchable) [size=8K]
Region 3: I/O ports at c160 [size=32]
Expansion ROM at 000c0000 [disabled] [size=128K]
Kernel modules: qxl
00:03.0 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6
port SATA Controller [AHCI mode] [8086:2922] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Red Hat, Inc. QEMU Virtual Machine [1af4:1100]
Physical Slot: 3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 24
Region 4: I/O ports at c180 [size=32]
Region 5: Memory at fc032000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee01004 Data: 4024
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Kernel driver in use: ahci
Kernel modules: ahci
00:04.0 Unclassified device [00ff]: Red Hat, Inc. Virtio memory balloon
[1af4:1002]
Subsystem: Red Hat, Inc. Virtio memory balloon [1af4:0005]
Physical Slot: 4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c1a0 [size=32]
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci
00:05.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [10ec:8139] (rev 20)
Subsystem: Red Hat, Inc. QEMU Virtual Machine [1af4:1100]
Physical Slot: 5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c000 [size=256]
Region 1: Memory at fc033000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at fc000000 [disabled] [size=128K]
Kernel driver in use: 8139cp
Kernel modules: 8139cp, 8139too
00:06.0 Communication controller [0780]: Red Hat, Inc. Virtio console
[1af4:1003]
Subsystem: Red Hat, Inc. Virtio console [1af4:0003]
Physical Slot: 6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c1c0 [size=32]
Region 1: Memory at fc034000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] MSI-X: Enable+ Count=32 Masked-
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00000800
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci
00:07.0 SCSI storage controller [0100]: Red Hat, Inc. Virtio block device
[1af4:1001]
Subsystem: Red Hat, Inc. Virtio block device [1af4:0002]
Physical Slot: 7
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c100 [size=64]
Region 1: Memory at fc035000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] MSI-X: Enable+ Count=2 Masked-
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00000800
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci
** USB devices:
Bus 001 Device 003: ID 0627:0001 Adomax Technology Co., Ltd QEMU USB Hub
Bus 001 Device 002: ID 0409:55aa NEC Corp. Hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: bullseye/sid
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 5.2.0-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8),
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.2.0-2-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.135
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-5.2.0-2-amd64 recommends:
ii apparmor 2.13.3-5
ii firmware-linux-free 3.4
Versions of packages linux-image-5.2.0-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.04-3
pn linux-doc-5.2 <none>
Versions of packages linux-image-5.2.0-2-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
