Package: src:linux
Version: 4.19.67-2
Severity: normal
Dear Maintainer,
The panel_ignore_lid parameter is no longer available in the i915
module, even as an "unsafe" variable. Could you please help to get it
restored?
I am using a laptop with a video card supported by the i915 kernel
module. When I was using Debian 9, I ran into a frustrating problem
where the HDMI video output would often stay completely black after
changing resolutions. If I kept changing resolutions (for several
minutes), it would randomly come back on. From then on, it would keep
working, as long as the resolution never changed.
Using Linux 4.9, I was happy when I found that there is a fix for the
problem: setting i915.panel_ignore_lid=-1 at boot time (or changing
the parameter at run time in /sys/module/i915/parameters) would cause
the external monitor to always work properly.
However, when I upgraded to Debian 10, with Linux 4.19, the problem
returned. After investigation, it appears that that setting is
completely missing!
i915: unknown parameter 'panel_ignore_lid' ignored
There is no obvious replacement for it. I read through the i915 git
changelog and found the point where panel_ignore_lid was marked as
"unsafe" (setting it would taint the kernel). I didn't see any
mention, however, of why the variable would have been removed
completely.
I did come across an instance where a developer had accidentally
broken a feature, but since nobody complained, they figured nobody
cared and deleted the whole feature. I hope that doesn't happen to the
'panel_ignore_lid' parameter as it is essential for this particular
system.
The laptop is an HP Pavilion x360 m1 Convertible. It has an Intel
CherryTrail HD Graphics device (0x8086, 0x22B1). The built-in screen
died shortly after purchase — which is why it is plugged into an HDMI
monitor.
-- Package-specific info:
** Version:
Linux version 4.19.0-6-amd64 (debian-kernel@lists.debian.org) (gcc version
8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2 (2019-08-28)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-amd64
root=UUID=5d1a8ca2-8b04-4804-b4c1-db78a6ae8408 ro fsck.mode=force
fsck.repair=yes video=eDP-1:d video=HDMI-A-1:D i915.panel_ignore_lid=-1
** Not tainted
** Kernel log:
[ 31.815145] pstore: crypto_comp_decompress failed, ret = -22!
[ 31.815147] pstore: decompression failed: -22
[ 31.815532] pstore: crypto_comp_decompress failed, ret = -22!
[ 31.815535] pstore: decompression failed: -22
[ 31.815847] pstore: crypto_comp_decompress failed, ret = -22!
[ 31.815849] pstore: decompression failed: -22
[ 31.816163] pstore: crypto_comp_decompress failed, ret = -22!
[ 31.816165] pstore: decompression failed: -22
[ 31.816584] pstore: crypto_comp_decompress failed, ret = -22!
[ 31.816587] pstore: decompression failed: -22
[ 31.816927] pstore: crypto_comp_decompress failed, ret = -22!
[ 31.816929] pstore: decompression failed: -22
[ 31.817280] pstore: crypto_comp_decompress failed, ret = -22!
[ 31.817282] pstore: decompression failed: -22
[ 31.817335] pstore: Registered efi as persistent store backend
[ 31.970638] hp_wmi: query 0xd returned error 0x5
[ 32.232136] Intel(R) Wireless WiFi driver for Linux
[ 32.237217] input: HP WMI hotkeys as /devices/virtual/input/input15
[ 32.241406] Copyright(c) 2003- 2015 Intel Corporation
[ 32.349454] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 32.522475] media: Linux media interface: v0.10
[ 32.523297] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops
i915_audio_component_bind_ops [i915])
[ 32.555950] cdc_acm 1-3:1.0: ttyACM0: USB ACM device
[ 32.558012] usbcore: registered new interface driver cdc_acm
[ 32.558015] cdc_acm: USB Abstract Control Model driver for USB modems and
ISDN adapters
[ 32.714811] iwlwifi 0000:02:00.0: firmware: direct-loading firmware
iwlwifi-7265D-29.ucode
[ 32.715965] iwlwifi 0000:02:00.0: loaded firmware version 29.1044073957.0
op_mode iwlmvm
[ 32.731789] Bluetooth: Core ver 2.22
[ 32.731830] NET: Registered protocol family 31
[ 32.731832] Bluetooth: HCI device and connection manager initialized
[ 32.731840] Bluetooth: HCI socket layer initialized
[ 32.771489] Bluetooth: L2CAP socket layer initialized
[ 32.771515] Bluetooth: SCO socket layer initialized
[ 32.789644] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC295:
line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 32.789648] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 32.789650] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1
(0x21/0x0/0x0/0x0/0x0)
[ 32.789651] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 32.789653] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 32.789656] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 32.789658] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 32.849481] videodev: Linux video capture interface: v2.00
[ 32.937257] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 32.945991] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 32.959469] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 32.994005] intel_rapl: Found RAPL domain package
[ 33.007419] intel_rapl: Found RAPL domain core
[ 33.099157] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC
3165, REV=0x210
[ 33.118625] iwlwifi 0000:02:00.0: base HW address: ac:2b:6e:36:6e:79
[ 33.202346] uvcvideo: Found UVC 1.00 device HP Wide Vision HD (1bcf:2c83)
[ 33.211959] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 33.212556] thermal thermal_zone8: failed to read out thermal zone (-61)
[ 33.224468] uvcvideo 1-5.3:1.0: Entity type for entity Extension 4 was not
initialized!
[ 33.224472] uvcvideo 1-5.3:1.0: Entity type for entity Extension 3 was not
initialized!
[ 33.224474] uvcvideo 1-5.3:1.0: Entity type for entity Processing 2 was not
initialized!
[ 33.224476] uvcvideo 1-5.3:1.0: Entity type for entity Camera 1 was not
initialized!
[ 33.224654] input: HP Wide Vision HD: HP Wide Visi as
/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.3/1-5.3:1.0/input/input19
[ 33.224901] usbcore: registered new interface driver uvcvideo
[ 33.224903] USB Video Class driver (1.1.1)
[ 33.256246] usbcore: registered new interface driver btusb
[ 33.276947] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 33.402905] bluetooth hci0: firmware: direct-loading firmware
intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 33.413178] Bluetooth: hci0: Intel Bluetooth firmware file:
intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 33.746345] Bluetooth: hci0: unexpected event for opcode 0xfc2f
[ 33.801470] Bluetooth: hci0: Intel firmware patch completed and activated
[ 34.623685] Adding 4015100k swap on /dev/sda3. Priority:-2 extents:1
across:4015100k FS
[ 36.305634] audit: type=1400 audit(1568293025.484:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=482
comm="apparmor_parser"
[ 36.354584] audit: type=1400 audit(1568293025.536:3): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-soffice"
pid=483 comm="apparmor_parser"
[ 36.390949] audit: type=1400 audit(1568293025.536:4): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg"
pid=483 comm="apparmor_parser"
[ 36.401250] audit: type=1400 audit(1568293025.540:5): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed"
pid=481 comm="apparmor_parser"
[ 36.411529] audit: type=1400 audit(1568293025.564:6): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-senddoc"
pid=486 comm="apparmor_parser"
[ 36.421747] audit: type=1400 audit(1568293025.568:7): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-oopslash"
pid=484 comm="apparmor_parser"
[ 36.471178] audit: type=1400 audit(1568293025.652:8): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/telepathy/mission-control-5" pid=485 comm="apparmor_parser"
[ 36.482868] audit: type=1400 audit(1568293025.652:9): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/telepathy/telepathy-*" pid=485 comm="apparmor_parser"
[ 36.493026] audit: type=1400 audit(1568293025.652:10): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=485
comm="apparmor_parser"
[ 36.503687] audit: type=1400 audit(1568293025.652:11): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/telepathy/telepathy-*//sanitized_helper" pid=485
comm="apparmor_parser"
[ 41.498334] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 41.498336] Bluetooth: BNEP filters: protocol multicast
[ 41.498343] Bluetooth: BNEP socket layer initialized
[ 44.643137] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 44.757120] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 44.896443] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 45.179849] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 48.750768] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 49.724902] wlan0: authenticate with 30:b5:c2:fb:d9:01
[ 49.733699] wlan0: send auth to 30:b5:c2:fb:d9:01 (try 1/3)
[ 49.736264] wlan0: authenticated
[ 49.738295] wlan0: associate with 30:b5:c2:fb:d9:01 (try 1/3)
[ 49.739850] wlan0: RX AssocResp from 30:b5:c2:fb:d9:01 (capab=0x11 status=0
aid=3)
[ 49.749723] wlan0: associated
[ 49.862980] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 64.361608] fuse init (API version 7.27)
[ 71.051427] Bluetooth: RFCOMM TTY layer initialized
[ 71.051459] Bluetooth: RFCOMM socket layer initialized
[ 71.051485] Bluetooth: RFCOMM ver 1.11
[ 73.967362] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 73.967375] Bluetooth: HIDP socket layer initialized
[ 73.992120] apple 0005:05AC:0255.0004: unknown main item tag 0x0
[ 73.992713] input: Melissa Eriksen\xe2\x80\x99s Keyboard as
/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1:1.0/bluetooth/hci0/hci0:256/0005:05AC:0255.0004/input/input20
[ 73.993123] apple 0005:05AC:0255.0004: input,hidraw2: BLUETOOTH HID v0.50
Keyboard [Melissa Eriksen\xe2\x80\x99s Keyboard] on ac:2b:6e:36:6e:7d
[ 97.265719] rfkill: input handler disabled
** Model information
sys_vendor: HP
product_name: HP Pavilion x360 m1 Convertible
product_version: Type1ProductConfigId
chassis_vendor: HP
chassis_version: Chassis Version
bios_vendor: Insyde
bios_version: F.06
board_vendor: HP
board_name: 81A2
board_version: 49.22
** Loaded modules:
hid_apple
hidp
rfcomm
fuse
ctr
ccm
cmac
bnep
binfmt_misc
nls_ascii
nls_cp437
vfat
fat
btusb
arc4
uvcvideo
btrtl
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
iwlmvm
videobuf2_common
intel_rapl
snd_hda_codec_hdmi
btbcm
mac80211
btintel
hid_sensor_rotation
hid_sensor_accel_3d
hid_sensor_magn_3d
hid_sensor_incl_3d
hid_sensor_gyro_3d
videodev
snd_hda_codec_realtek
bluetooth
snd_hda_codec_generic
drbg
hid_sensor_trigger
hid_sensor_iio_common
media
industrialio_triggered_buffer
snd_hda_intel
kfifo_buf
intel_powerclamp
snd_hda_codec
cdc_acm
industrialio
ansi_cprng
iwlwifi
snd_hda_core
coretemp
ecdh_generic
snd_hwdep
snd_pcm
rtsx_pci_ms
cfg80211
kvm_intel
snd_timer
sg
memstick
iTCO_wdt
kvm
snd
soundcore
processor_thermal_device
iTCO_vendor_support
intel_soc_dts_iosf
irqbypass
crct10dif_pclmul
crc32_pclmul
ghash_clmulni_intel
efi_pstore
serio_raw
intel_cstate
tpm_crb
efivars
tpm_tis
joydev
hp_wmi
rfkill
tpm_tis_core
pcspkr
tpm
wmi_bmof
hp_accel
hid_multitouch
lis3lv02d
intel_vbtn
hp_wireless
soc_button_array
sparse_keymap
input_polldev
evdev
int3400_thermal
int3403_thermal
acpi_thermal_rel
int340x_thermal_zone
pcc_cpufreq
rng_core
battery
ac
parport_pc
ppdev
lp
parport
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
sd_mod
hid_sensor_custom
hid_sensor_hub
usbhid
crc32c_intel
i915
hid_generic
rtsx_pci_sdmmc
xhci_pci
xhci_hcd
aesni_intel
aes_x86_64
crypto_simd
cryptd
psmouse
i2c_algo_bit
glue_helper
ahci
drm_kms_helper
libahci
usbcore
libata
i2c_i801
drm
sdhci_acpi
lpc_ich
rtsx_pci
scsi_mod
usb_common
sdhci
thermal
wmi
mmc_core
i2c_hid
hid
video
button
** Network interface configuration:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group
default qlen 1000
link/ether ac:2b:6e:36:6e:79 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.114/24 brd 192.168.1.255 scope global dynamic noprefixroute
wlan0
valid_lft 86166sec preferred_lft 86166sec
inet6 fe80::9f71:c8e7:ea40:def9/64 scope link noprefixroute
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 13566 199 0 0 0 0 0 0 13566
199 0 0 0 0 0 0
wlan0: 513486 724 0 0 0 0 0 0 64515
408 0 0 0 0 0 0
*** Protocol statistics:
Ip:
Forwarding: 2
567 total packets received
1 with invalid addresses
0 forwarded
0 incoming packets discarded
566 incoming packets delivered
494 requests sent out
20 outgoing packets dropped
Icmp:
43 ICMP messages received
1 input ICMP message failed
ICMP input histogram:
destination unreachable: 42
echo replies: 1
42 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 41
echo requests: 1
IcmpMsg:
InType0: 1
InType3: 42
OutType3: 41
OutType8: 1
Tcp:
75 active connection openings
0 passive connection openings
59 failed connection attempts
4 connection resets received
0 connections established
322 segments received
342 segments sent out
0 segments retransmitted
0 bad segments received
76 resets sent
Udp:
133 packets received
40 packets to unknown port received
0 packet receive errors
162 packets sent
0 receive buffer errors
0 send buffer errors
IgnoredMulti: 84
UdpLite:
TcpExt:
6 TCP sockets finished time wait in fast timer
4 delayed acks sent
Quick ack mode was activated 2 times
103 packet headers predicted
21 acknowledgments not containing data payload received
12 predicted acknowledgments
TCPTimeouts: 1
TCPDSACKOldSent: 2
5 connections reset due to unexpected data
4 connections reset due to early user close
TCPRcvCoalesce: 47
TCPSpuriousRtxHostQueues: 1
TCPAutoCorking: 8
TCPOrigDataSent: 61
TCPDelivered: 70
IpExt:
InMcastPkts: 75
OutMcastPkts: 40
InBcastPkts: 47
OutBcastPkts: 9
InOctets: 502176
OutOctets: 48533
InMcastOctets: 14813
OutMcastOctets: 9348
InBcastOctets: 2923
OutBcastOctets: 529
InNoECTPkts: 781
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series SoC Transaction Register [8086:2280] (rev 35)
Subsystem: Hewlett-Packard Company Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series SoC Transaction Register [103c:81a2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: iosf_mbi_pci
00:02.0 VGA compatible controller [0300]: Intel Corporation
Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics
Controller [8086:22b1] (rev 35) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Integrated Graphics Controller [103c:81a2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 119
Region 0: Memory at 90000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 2000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:0b.0 Signal processing controller [1180]: Intel Corporation
Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management
Controller [8086:22dc] (rev 35)
Subsystem: Hewlett-Packard Company Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series Power Management Controller [103c:81a2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 120
Region 0: Memory at 91418000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device
00:13.0 SATA controller [0106]: Intel Corporation Atom/Celeron/Pentium
Processor x5-E8000/J3xxx/N3xxx Series SATA Controller [8086:22a3] (rev 35)
(prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series SATA Controller [103c:81a2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 117
Region 4: I/O ports at 2060 [size=32]
Region 5: Memory at 9141d000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:14.0 USB controller [0c03]: Intel Corporation Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series USB xHCI Controller [8086:22b5] (rev 35) (prog-if
30 [XHCI])
Subsystem: Hewlett-Packard Company Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series USB xHCI Controller [103c:81a2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 118
Region 0: Memory at 91400000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:1a.0 Encryption controller [1080]: Intel Corporation Atom/Celeron/Pentium
Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine [8086:2298] (rev
35)
Subsystem: Hewlett-Packard Company Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine [103c:81a2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 91300000 (32-bit, non-prefetchable) [size=1M]
Region 1: Memory at 91200000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series High Definition Audio Controller [8086:2284] (rev
35)
Subsystem: Hewlett-Packard Company Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series High Definition Audio Controller [103c:81a2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 122
Region 0: Memory at 91410000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series PCI Express Port #1 [8086:22c8] (rev 35) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 91500000-916fffff
Prefetchable memory behind bridge: 0000000091700000-00000000918fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series PCI Express Port #3 [8086:22cc] (rev 35) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: 91100000-911fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series PCI Express Port #4 [8086:22ce] (rev 35) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: 91000000-910fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series PCU [8086:229c] (rev 35)
Subsystem: Hewlett-Packard Company Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series PCU [103c:81a2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.3 SMBus [0c05]: Intel Corporation Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx SMBus Controller [8086:2292] (rev 35)
Subsystem: Hewlett-Packard Company Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx SMBus Controller [103c:81a2]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: Memory at 91419000 (32-bit, non-prefetchable) [size=32]
Region 4: I/O ports at 2040 [size=32]
Capabilities: <access denied>
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
02:00.0 Network controller [0280]: Intel Corporation Wireless 3165 [8086:3165]
(rev 81)
Subsystem: Intel Corporation Dual Band Wireless AC 3165 [8086:4010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 121
Region 0: Memory at 91100000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI
Express Card Reader [10ec:5229] (rev 01)
Subsystem: Hewlett-Packard Company RTS5229 PCI Express Card Reader
[103c:81a2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 116
Region 0: Memory at 91000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 1bcf:2c83 Sunplus Innovation Technology Inc.
Bus 001 Device 005: ID 8087:0a2a Intel Corp.
Bus 001 Device 004: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 003: ID 2548:1002 Pulse-Eight CEC Adapter
Bus 001 Device 002: ID 0483:91d1 STMicroelectronics Sensor Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 10.1
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.19.0-6-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8),
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-6-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133+deb10u1
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-4.19.0-6-amd64 recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
Versions of packages linux-image-4.19.0-6-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.02+dfsg1-20
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-6-amd64 is related to:
ii firmware-amd-graphics 20190114-2
ii firmware-atheros 20190114-2
ii firmware-bnx2 20190114-2
ii firmware-bnx2x 20190114-2
ii firmware-brcm80211 20190114-2
ii firmware-cavium 20190114-2
ii firmware-intel-sound 20190114-2
ii firmware-intelwimax 20190114-2
ii firmware-ipw2x00 20190114-2
ii firmware-ivtv 20190114-2
ii firmware-iwlwifi 20190114-2
ii firmware-libertas 20190114-2
ii firmware-linux-nonfree 20190114-2
ii firmware-misc-nonfree 20190114-2
ii firmware-myricom 20190114-2
ii firmware-netxen 20190114-2
ii firmware-qlogic 20190114-2
ii firmware-realtek 20190114-2
ii firmware-samsung 20190114-2
ii firmware-siano 20190114-2
ii firmware-ti-connectivity 20190114-2
pn xen-hypervisor <none>
-- no debconf information
