Package: src:linux
Version: 4.19.37-5
Severity: important
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
Previous Debian versions before 9.6 booted slowly on systems with Intel
GM965 graphics because of timeouts attempting to init the s-video port.
Debian 9.6.x fixed it. On debian 10 the previous behaviour (timeouts
during boot) reappeared.
* What exactly did you do (or not do) that was effective (or
ineffective)?
Booted the Debian 9.6 x86 LiveCD
* What was the outcome of this action?
Boot time measured in over two minutes, vs 40 secons without the svideo
timeouts
* What outcome did you expect instead?
Booting without timeouts and pauses between repeated attempts to init the
svideo port.
-- Package-specific info:
** Version:
Linux version 4.19.0-5-686 (debian-kernel@lists.debian.org) (gcc version 8.3.0
(Debian 8.3.0-7)) #1 SMP Debian 4.19.37-5 (2019-06-19)
** Command line:
BOOT_IMAGE=/live/vmlinuz-4.19.0-5-686 initrd=/live/initrd.img-4.19.0-5-686
boot=live components splash quiet
** Tainted: W (512)
* Taint on warning.
** Kernel log:
[ 5958.186477] WARNING: CPU: 1 PID: 1359 at drivers/gpu/drm/drm_vblank.c:1084
drm_wait_one_vblank+0x1c6/0x1e0 [drm]
[ 5958.186479] Modules linked in: arc4 uvcvideo videobuf2_vmalloc
videobuf2_memops videobuf2_v4l2 videobuf2_common videodev ath5k ath media
mac80211 coretemp joydev hp_wmi wmi_bmof serio_raw sparse_keymap pcspkr
snd_hda_codec_conexant snd_hda_codec_generic sg snd_hda_intel snd_hda_codec
cfg80211 iTCO_wdt iTCO_vendor_support snd_hda_core snd_hwdep snd_pcm snd_timer
rfkill snd evdev soundcore battery ac pcc_cpufreq acpi_cpufreq ip_tables
x_tables autofs4 squashfs zstd_decompress xxhash loop overlay isofs sr_mod
cdrom ata_generic sd_mod ums_realtek uas usb_storage i915 ahci ata_piix libahci
i2c_algo_bit libata drm_kms_helper psmouse ehci_pci syscopyarea sysfillrect
uhci_hcd i2c_i801 scsi_mod sysimgblt ehci_hcd fb_sys_fops drm 8139too 8139cp
lpc_ich mii usbcore usb_common thermal wmi video button
[ 5958.186623] CPU: 1 PID: 1359 Comm: Xorg Tainted: G W
4.19.0-5-686 #1 Debian 4.19.37-5
[ 5958.186626] Hardware name: Hewlett-Packard Compaq Presario C700 Notebook
PC/30D9, BIOS F.33 04/29/2008
[ 5958.186649] EIP: drm_wait_one_vblank+0x1c6/0x1e0 [drm]
[ 5958.186655] Code: 00 00 00 00 e9 c6 fe ff ff 8d 76 00 8b 45 cc 8d 55 dc e8
ad 97 98 ca 85 ff 0f 85 dd fe ff ff 56 68 38 0c 73 f7 e8 1e 80 94 ca <0f> 0b 58
5a e9 c9 fe ff ff e8 1c 7d 94 ca 8d b4 26 00 00 00 00 8d
[ 5958.186659] EAX: 0000001f EBX: f2bb8000 ECX: f395dcac EDX: 00000007
[ 5958.186662] ESI: 00000000 EDI: 00000000 EBP: f36dbbc8 ESP: f36dbb8c
[ 5958.186667] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210296
[ 5958.186670] CR0: 80050033 CR2: 018ce6e0 CR3: 31dad000 CR4: 000006d0
[ 5958.186674] Call Trace:
[ 5958.186688] ? finish_wait+0x70/0x70
[ 5958.186759] intel_get_load_detect_pipe+0x3b1/0x3e0 [i915]
[ 5958.186820] intel_tv_detect+0x10b/0x480 [i915]
[ 5958.186887] ? intel_tv_get_modes+0x1f0/0x1f0 [i915]
[ 5958.186900] drm_helper_probe_detect+0x45/0x90 [drm_kms_helper]
[ 5958.186912] drm_helper_probe_single_connector_modes+0xbc/0x5f0
[drm_kms_helper]
[ 5958.186925] ? drm_helper_probe_detect+0x90/0x90 [drm_kms_helper]
[ 5958.186951] drm_mode_getconnector+0x395/0x3d0 [drm]
[ 5958.186980] ? drm_connector_property_set_ioctl+0x60/0x60 [drm]
[ 5958.186999] drm_ioctl_kernel+0x88/0xd0 [drm]
[ 5958.187020] drm_ioctl+0x21d/0x390 [drm]
[ 5958.187044] ? drm_connector_property_set_ioctl+0x60/0x60 [drm]
[ 5958.187056] ? new_sync_write+0xdf/0x150
[ 5958.187076] ? drm_version+0x80/0x80 [drm]
[ 5958.187082] do_vfs_ioctl+0x9a/0x6c0
[ 5958.187090] ? vfs_write+0x173/0x1b0
[ 5958.187096] ksys_ioctl+0x56/0x80
[ 5958.187101] sys_ioctl+0x16/0x20
[ 5958.187107] do_fast_syscall_32+0x81/0x1a0
[ 5958.187114] entry_SYSENTER_32+0x6b/0xbe
[ 5958.187118] EIP: 0xb7f35d41
[ 5958.187123] Code: f6 ff ff 55 89 e5 8b 55 08 8b 80 5c cd ff ff 85 d2 74 02
89 02 5d c3 8b 04 24 c3 8b 1c 24 c3 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59
c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76
[ 5958.187126] EAX: ffffffda EBX: 0000000e ECX: c05064a7 EDX: bff26098
[ 5958.187130] ESI: 00000001 EDI: c05064a7 EBP: 0000000e ESP: bff26018
[ 5958.187134] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00003296
[ 5958.187139] ---[ end trace d8f48489b338b794 ]---
[ 5968.318398] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]]
*ERROR* [CRTC:34:pipe A] flip_done timed out
[ 5978.562416] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]]
*ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
[ 6014.914418] [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]]
*ERROR* [CRTC:41:pipe B] flip_done timed out
[ 6015.019984] ------------[ cut here ]------------
[ 6015.019989] vblank wait timed out on crtc 1
[ 6015.020076] WARNING: CPU: 1 PID: 818 at drivers/gpu/drm/drm_vblank.c:1084
drm_wait_one_vblank+0x1c6/0x1e0 [drm]
[ 6015.020078] Modules linked in: arc4 uvcvideo videobuf2_vmalloc
videobuf2_memops videobuf2_v4l2 videobuf2_common videodev ath5k ath media
mac80211 coretemp joydev hp_wmi wmi_bmof serio_raw sparse_keymap pcspkr
snd_hda_codec_conexant snd_hda_codec_generic sg snd_hda_intel snd_hda_codec
cfg80211 iTCO_wdt iTCO_vendor_support snd_hda_core snd_hwdep snd_pcm snd_timer
rfkill snd evdev soundcore battery ac pcc_cpufreq acpi_cpufreq ip_tables
x_tables autofs4 squashfs zstd_decompress xxhash loop overlay isofs sr_mod
cdrom ata_generic sd_mod ums_realtek uas usb_storage i915 ahci ata_piix libahci
i2c_algo_bit libata drm_kms_helper psmouse ehci_pci syscopyarea sysfillrect
uhci_hcd i2c_i801 scsi_mod sysimgblt ehci_hcd fb_sys_fops drm 8139too 8139cp
lpc_ich mii usbcore usb_common thermal wmi video button
[ 6015.020219] CPU: 1 PID: 818 Comm: Xorg Tainted: G W
4.19.0-5-686 #1 Debian 4.19.37-5
[ 6015.020222] Hardware name: Hewlett-Packard Compaq Presario C700 Notebook
PC/30D9, BIOS F.33 04/29/2008
[ 6015.020245] EIP: drm_wait_one_vblank+0x1c6/0x1e0 [drm]
[ 6015.020251] Code: 00 00 00 00 e9 c6 fe ff ff 8d 76 00 8b 45 cc 8d 55 dc e8
ad 97 98 ca 85 ff 0f 85 dd fe ff ff 56 68 38 0c 73 f7 e8 1e 80 94 ca <0f> 0b 58
5a e9 c9 fe ff ff e8 1c 7d 94 ca 8d b4 26 00 00 00 00 8d
[ 6015.020256] EAX: 0000001f EBX: f2bb8000 ECX: f395dcac EDX: 00000007
[ 6015.020259] ESI: 00000001 EDI: 00000000 EBP: f012dbc8 ESP: f012db8c
[ 6015.020263] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210296
[ 6015.020267] CR0: 80050033 CR2: 01a86fd4 CR3: 323c0000 CR4: 000006d0
[ 6015.020270] Call Trace:
[ 6015.020285] ? finish_wait+0x70/0x70
[ 6015.020356] intel_get_load_detect_pipe+0x3b1/0x3e0 [i915]
[ 6015.020417] intel_tv_detect+0x10b/0x480 [i915]
[ 6015.020484] ? intel_tv_get_modes+0x1f0/0x1f0 [i915]
[ 6015.020497] drm_helper_probe_detect+0x45/0x90 [drm_kms_helper]
[ 6015.020508] drm_helper_probe_single_connector_modes+0xbc/0x5f0
[drm_kms_helper]
[ 6015.020573] ? intel_atomic_commit_tail+0xd60/0xd60 [i915]
[ 6015.020587] ? drm_helper_probe_detect+0x90/0x90 [drm_kms_helper]
[ 6015.020613] drm_mode_getconnector+0x395/0x3d0 [drm]
[ 6015.020641] ? drm_connector_property_set_ioctl+0x60/0x60 [drm]
[ 6015.020660] drm_ioctl_kernel+0x88/0xd0 [drm]
[ 6015.020681] drm_ioctl+0x21d/0x390 [drm]
[ 6015.020706] ? drm_connector_property_set_ioctl+0x60/0x60 [drm]
[ 6015.020718] ? new_sync_write+0xdf/0x150
[ 6015.020738] ? drm_version+0x80/0x80 [drm]
[ 6015.020744] do_vfs_ioctl+0x9a/0x6c0
[ 6015.020751] ? vfs_write+0x173/0x1b0
[ 6015.020757] ksys_ioctl+0x56/0x80
[ 6015.020762] sys_ioctl+0x16/0x20
[ 6015.020768] do_fast_syscall_32+0x81/0x1a0
[ 6015.020775] entry_SYSENTER_32+0x6b/0xbe
[ 6015.020779] EIP: 0xb7fa4d41
[ 6015.020783] Code: f6 ff ff 55 89 e5 8b 55 08 8b 80 5c cd ff ff 85 d2 74 02
89 02 5d c3 8b 04 24 c3 8b 1c 24 c3 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59
c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76
[ 6015.020787] EAX: ffffffda EBX: 0000000e ECX: c05064a7 EDX: bf946888
[ 6015.020790] ESI: 00000001 EDI: c05064a7 EBP: 0000000e ESP: bf946808
[ 6015.020795] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00003292
[ 6015.020800] ---[ end trace d8f48489b338b795 ]---
[ 6025.150385] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]]
*ERROR* [CRTC:41:pipe B] flip_done timed out
[ 6035.390384] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]]
*ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
[ 6046.242793] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 6046.355502] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 6046.370689] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 6055.986581] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 6068.169662] wlp1s0: authenticate with 0c:80:63:f7:89:66
[ 6068.176892] wlp1s0: send auth to 0c:80:63:f7:89:66 (try 1/3)
[ 6068.179093] wlp1s0: authenticated
[ 6068.180483] wlp1s0: associating with AP with corrupt beacon and probe
response
[ 6068.182624] wlp1s0: associate with 0c:80:63:f7:89:66 (try 1/3)
[ 6068.186464] wlp1s0: RX AssocResp from 0c:80:63:f7:89:66 (capab=0x431
status=0 aid=1)
[ 6068.186588] wlp1s0: associated
[ 6068.389383] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 6108.441071] perf: interrupt took too long (3997 > 3981), lowering
kernel.perf_event_max_sample_rate to 50000
[ 6365.778347] usb 2-5: reset high-speed USB device number 3 using ehci-pci
[ 6500.729215] perf: interrupt took too long (4999 > 4996), lowering
kernel.perf_event_max_sample_rate to 40000
[ 6734.989403] perf: interrupt took too long (6252 > 6248), lowering
kernel.perf_event_max_sample_rate to 31750
[ 7543.750342] usb 2-5: reset high-speed USB device number 3 using ehci-pci
[ 7972.106318] usb 2-5: reset high-speed USB device number 3 using ehci-pci
** Model information
** Loaded modules:
ctr
ccm
arc4
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
videobuf2_common
videodev
ath5k
ath
media
mac80211
coretemp
joydev
hp_wmi
wmi_bmof
serio_raw
sparse_keymap
pcspkr
snd_hda_codec_conexant
snd_hda_codec_generic
sg
snd_hda_intel
snd_hda_codec
cfg80211
iTCO_wdt
iTCO_vendor_support
snd_hda_core
snd_hwdep
snd_pcm
snd_timer
rfkill
snd
evdev
soundcore
battery
ac
pcc_cpufreq
acpi_cpufreq
ip_tables
x_tables
autofs4
squashfs
zstd_decompress
xxhash
loop
overlay
isofs
sr_mod
cdrom
ata_generic
sd_mod
ums_realtek
uas
usb_storage
i915
ahci
ata_piix
libahci
i2c_algo_bit
libata
drm_kms_helper
psmouse
ehci_pci
syscopyarea
sysfillrect
uhci_hcd
i2c_i801
scsi_mod
sysimgblt
ehci_hcd
fb_sys_fops
drm
8139too
8139cp
lpc_ich
mii
usbcore
usb_common
thermal
wmi
video
button
** PCI devices:
not available
** USB devices:
not available
-- System Information:
Debian Release: 10.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 4.19.0-5-686 (SMP w/2 CPU cores)
Kernel taint flags: TAINT_WARN
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8),
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-5-686 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-4.19.0-5-686 recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
Versions of packages linux-image-4.19.0-5-686 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | grub-efi-ia32 | extlinux <none>
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-5-686 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
