In contrast to what I wrote earlier it appears that
xserver-xorg-input-synaptics *does* need to be installed. I installed
it and now xinput list-props is listing more features such as circular
scrolling. In Plasma system settings touchpad features that were
previously not available are now available.
xinput list-props 12
Device 'Synaptics TM3053-003':
Device Enabled (153): 1
Coordinate Transformation Matrix (155): 1.000000, 0.000000,
0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
Device Accel Profile (285): 1
Device Accel Constant Deceleration (286): 2.500000
Device Accel Adaptive Deceleration (287): 1.000000
Device Accel Velocity Scaling (288): 12.500000
Synaptics Edges (289): 77, 1863, 57, 1005
Synaptics Finger (290): 25, 48, 0
Synaptics Tap Time (291): 180
Synaptics Tap Move (292): 96
Synaptics Tap Durations (293): 180, 180, 100
Synaptics ClickPad (294): 1
Synaptics Middle Button Timeout (295): 0
Synaptics Two-Finger Pressure (296): 282
Synaptics Two-Finger Width (297): 7
Synaptics Scrolling Distance (298): 50, 50
Synaptics Edge Scrolling (299): 1, 0, 0
Synaptics Two-Finger Scrolling (300): 1, 0
Synaptics Move Speed (301): 1.000000, 1.750000, 0.537430,
0.000000
Synaptics Off (302): 2
Synaptics Locked Drags (303): 1
Synaptics Locked Drags Timeout (304): 30000
Synaptics Tap Action (305): 0, 0, 0, 0, 1, 3, 2
Synaptics Click Action (306): 1, 3, 2
Synaptics Circular Scrolling (307): 1
Synaptics Circular Scrolling Distance (308): 0.100007
Synaptics Circular Scrolling Trigger (309): 0
Synaptics Circular Pad (310): 0
Synaptics Palm Detection (311): 0
Synaptics Palm Dimensions (312): 10, 200
Synaptics Coasting Speed (313): 20.000000, 50.000000
Synaptics Pressure Motion (314): 92, 160
Synaptics Pressure Motion Factor (315): 1.000000, 1.000000
Synaptics Grab Event Device (316): 0
Synaptics Gestures (317): 1
Synaptics Capabilities (318): 1, 0, 0, 1, 1, 1, 0
Synaptics Pad Resolution (319): 20, 20
Synaptics Area (320): 0, 0, 0, 0
Synaptics Soft Button Areas (321): 970, 0, 870, 0, 0, 0, 0, 0
Synaptics Noise Cancellation (322): 13, 13
Device Product ID (277): 1739, 0
Device Node (276): "/dev/input/event4"
I did not have to change anything with xorg.conf. This is what was
generated by Xorg -configure after installing xserver-xorg-input-synaptics:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "built-ins"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "Accel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "Backlight" # <str>
#Option "CustomEDID" # <str>
#Option "DRI" # <str>
#Option "Present" # [<bool>]
#Option "ColorKey" # <i>
#Option "VideoKey" # <i>
#Option "Tiling" # [<bool>]
#Option "LinearFramebuffer" # [<bool>]
#Option "HWRotation" # [<bool>]
#Option "VSync" # [<bool>]
#Option "PageFlip" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
#Option "TripleBuffer" # [<bool>]
#Option "XvPreferOverlay" # [<bool>]
#Option "HotPlug" # [<bool>]
#Option "ReprobeOutputs" # [<bool>]
#Option "XvMC" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "VirtualHeads" # <i>
#Option "TearFree" # [<bool>]
#Option "PerCrtcPixmaps" # [<bool>]
#Option "FallbackDebug" # [<bool>]
#Option "DebugFlushBatches" # [<bool>]
#Option "DebugFlushCaches" # [<bool>]
#Option "DebugWait" # [<bool>]
#Option "BufferCache" # [<bool>]
Identifier "Card0"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Here is the log:
[ 4.000] (--) Log file renamed from "/var/log/Xorg.pid-658.log" to
"/var/log/Xorg.0.log"
[ 4.001]
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[ 4.001] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
[ 4.001] Current Operating System: Linux life 4.19.16 #1 SMP Fri Jan
25 13:48:13 MST 2019 x86_64
[ 4.001] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.16
root=UUID=e69a3027-d6b6-4620-8e05-8c8fb8f06b27 ro quiet
[ 4.001] Build Date: 25 October 2018 06:15:23PM
[ 4.001] xorg-server 2:1.20.3-1 (https://www.debian.org/support)
[ 4.001] Current version of pixman: 0.36.0
[ 4.001] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.001] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.001] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 26
12:24:21 2019
[ 4.002] (==) Using config file: "/etc/X11/xorg.conf"
[ 4.002] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.003] (==) ServerLayout "X.org Configured"
[ 4.003] (**) |-->Screen "Screen0" (0)
[ 4.003] (**) | |-->Monitor "Monitor0"
[ 4.003] (**) | |-->Device "Card0"
[ 4.003] (**) |-->Input Device "Mouse0"
[ 4.003] (**) |-->Input Device "Keyboard0"
[ 4.003] (==) Automatically adding devices
[ 4.003] (==) Automatically enabling devices
[ 4.003] (==) Automatically adding GPU devices
[ 4.003] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 4.005] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not
exist.
[ 4.005] Entry deleted from font path.
[ 4.007] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not
exist.
[ 4.007] Entry deleted from font path.
[ 4.007] (**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 4.007] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 4.007] (WW) Hotplugging is on, devices using drivers 'kbd',
'mouse' or 'vmmouse' will be disabled.
[ 4.007] (WW) Disabling Mouse0
[ 4.007] (WW) Disabling Keyboard0
[ 4.007] (II) Loader magic: 0x564da1d6fe20
[ 4.007] (II) Module ABI versions:
[ 4.007] X.Org ANSI C Emulation: 0.4
[ 4.007] X.Org Video Driver: 24.0
[ 4.007] X.Org XInput driver : 24.1
[ 4.007] X.Org Server Extension : 10.0
[ 4.007] (++) using VT number 7
[ 4.007] (II) systemd-logind: logind integration requires -keeptty
and -keeptty was not provided, disabling logind integration
[ 4.008] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4.026] (--) PCI:*(0@0:2:0) 8086:1616:17aa:2223 rev 9, Mem @
0xe0000000/16777216, 0xc0000000/536870912, I/O @ 0x00003000/64, BIOS @
0x????????/131072
[ 4.026] (II) "glx" will be loaded. This was enabled by default and
also specified in the config file.
[ 4.026] (II) LoadModule: "glx"
[ 4.028] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.035] (II) Module glx: vendor="X.Org Foundation"
[ 4.035] compiled for 1.20.3, module version = 1.0.0
[ 4.035] ABI class: X.Org Server Extension, version 10.0
[ 4.035] (II) LoadModule: "intel"
[ 4.036] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4.038] (II) Module intel: vendor="X.Org Foundation"
[ 4.038] compiled for 1.20.1, module version = 2.99.917
[ 4.038] Module class: X.Org Video Driver
[ 4.038] ABI class: X.Org Video Driver, version 24.0
[ 4.038] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 4.038] (II) intel: Driver for Intel(R) HD Graphics
[ 4.038] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 4.038] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 4.045] (II) intel(0): Using Kernel Mode Setting driver: i915,
version 1.6.0 20180719
[ 4.045] (II) intel(0): SNA compiled: xserver-xorg-video-intel
2:2.99.917+git20180925-2 (Andreas Boll <ab...@debian.org>)
[ 4.045] (II) intel(0): SNA compiled for use with valgrind
[ 4.046] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD
Graphics 5500
[ 4.046] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1,
sse4.2, avx, avx2; using a maximum of 2 threads
[ 4.046] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 4.046] (==) intel(0): RGB weight 888
[ 4.046] (==) intel(0): Default visual is TrueColor
[ 4.046] (II) intel(0): Output eDP1 using monitor section Monitor0
[ 4.047] (**) intel(0): Found backlight control interface
intel_backlight (type 'raw') for output eDP1
[ 4.047] (II) intel(0): Enabled output eDP1
[ 4.047] (II) intel(0): Output DP1 has no monitor section
[ 4.047] (II) intel(0): Enabled output DP1
[ 4.047] (II) intel(0): Output HDMI1 has no monitor section
[ 4.047] (II) intel(0): Enabled output HDMI1
[ 4.047] (II) intel(0): Output DP2 has no monitor section
[ 4.047] (II) intel(0): Enabled output DP2
[ 4.047] (II) intel(0): Output HDMI2 has no monitor section
[ 4.047] (II) intel(0): Enabled output HDMI2
[ 4.047] (--) intel(0): Using a maximum size of 256x256 for hardware
cursors
[ 4.047] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 4.047] (II) intel(0): Enabled output VIRTUAL1
[ 4.047] (--) intel(0): Output eDP1 using initial mode 1920x1080 on
pipe 0
[ 4.047] (==) intel(0): TearFree enabled
[ 4.047] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4.047] (==) intel(0): DPI set to (96, 96)
[ 4.047] (II) Loading sub module "dri3"
[ 4.047] (II) LoadModule: "dri3"
[ 4.047] (II) Module "dri3" already built-in
[ 4.047] (II) Loading sub module "dri2"
[ 4.047] (II) LoadModule: "dri2"
[ 4.047] (II) Module "dri2" already built-in
[ 4.047] (II) Loading sub module "present"
[ 4.047] (II) LoadModule: "present"
[ 4.047] (II) Module "present" already built-in
[ 4.049] (II) intel(0): SNA initialized with Broadwell (gen8) backend
[ 4.049] (==) intel(0): Backing store enabled
[ 4.049] (==) intel(0): Silken mouse enabled
[ 4.050] (II) intel(0): HW Cursor enabled
[ 4.050] (==) intel(0): DPMS enabled
[ 4.050] (==) intel(0): Display hotplug detection enabled
[ 4.051] (II) intel(0): [DRI2] Setup complete
[ 4.051] (II) intel(0): [DRI2] DRI driver: i965
[ 4.051] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 4.051] (II) intel(0): direct rendering: DRI2 enabled
[ 4.051] (II) intel(0): hardware support for Present enabled
[ 4.051] (II) Initializing extension Generic Event Extension
[ 4.051] (II) Initializing extension SHAPE
[ 4.051] (II) Initializing extension MIT-SHM
[ 4.051] (II) Initializing extension XInputExtension
[ 4.051] (II) Initializing extension XTEST
[ 4.051] (II) Initializing extension BIG-REQUESTS
[ 4.051] (II) Initializing extension SYNC
[ 4.052] (II) Initializing extension XKEYBOARD
[ 4.052] (II) Initializing extension XC-MISC
[ 4.052] (II) Initializing extension SECURITY
[ 4.052] (II) Initializing extension XFIXES
[ 4.052] (II) Initializing extension RENDER
[ 4.052] (II) Initializing extension RANDR
[ 4.052] (II) Initializing extension COMPOSITE
[ 4.052] (II) Initializing extension DAMAGE
[ 4.052] (II) Initializing extension MIT-SCREEN-SAVER
[ 4.053] (II) Initializing extension DOUBLE-BUFFER
[ 4.053] (II) Initializing extension RECORD
[ 4.053] (II) Initializing extension DPMS
[ 4.053] (II) Initializing extension Present
[ 4.053] (II) Initializing extension DRI3
[ 4.053] (II) Initializing extension X-Resource
[ 4.053] (II) Initializing extension XVideo
[ 4.053] (II) Initializing extension XVideo-MotionCompensation
[ 4.053] (II) Initializing extension SELinux
[ 4.053] (II) SELinux: Disabled on system
[ 4.053] (II) Initializing extension GLX
[ 4.078] (II) AIGLX: Loaded and initialized i965
[ 4.078] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4.078] (II) Initializing extension XFree86-VidModeExtension
[ 4.078] (II) Initializing extension XFree86-DGA
[ 4.078] (II) Initializing extension XFree86-DRI
[ 4.078] (II) Initializing extension DRI2
[ 4.081] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using
pipe 0, position (0, 0), rotation normal, reflection none
[ 4.090] (II) intel(0): Setting screen physical size to 508 x 285
[ 4.139] (II) config/udev: Adding input device Power Button
(/dev/input/event3)
[ 4.139] (**) Power Button: Applying InputClass "libinput keyboard
catchall"
[ 4.139] (II) LoadModule: "libinput"
[ 4.139] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 4.144] (II) Module libinput: vendor="X.Org Foundation"
[ 4.144] compiled for 1.20.1, module version = 0.28.1
[ 4.144] Module class: X.Org XInput Driver
[ 4.144] ABI class: X.Org XInput driver, version 24.1
[ 4.144] (II) Using input driver 'libinput' for 'Power Button'
[ 4.144] (**) Power Button: always reports core events
[ 4.144] (**) Option "Device" "/dev/input/event3"
[ 4.144] (**) Option "_source" "server/udev"
[ 4.147] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 4.147] (II) event3 - Power Button: device is a keyboard
[ 4.147] (II) event3 - Power Button: device removed
[ 4.164] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event3"
[ 4.164] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 6)
[ 4.164] (**) Option "xkb_model" "pc105"
[ 4.164] (**) Option "xkb_layout" "us"
[ 4.165] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 4.165] (II) event3 - Power Button: device is a keyboard
[ 4.166] (II) config/udev: Adding input device Video Bus
(/dev/input/event13)
[ 4.166] (**) Video Bus: Applying InputClass "libinput keyboard
catchall"
[ 4.166] (II) Using input driver 'libinput' for 'Video Bus'
[ 4.166] (**) Video Bus: always reports core events
[ 4.166] (**) Option "Device" "/dev/input/event13"
[ 4.166] (**) Option "_source" "server/udev"
[ 4.167] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 4.167] (II) event13 - Video Bus: device is a keyboard
[ 4.167] (II) event13 - Video Bus: device removed
[ 4.200] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event13"
[ 4.200] (II) XINPUT: Adding extended input device "Video Bus"
(type: KEYBOARD, id 7)
[ 4.200] (**) Option "xkb_model" "pc105"
[ 4.200] (**) Option "xkb_layout" "us"
[ 4.203] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 4.203] (II) event13 - Video Bus: device is a keyboard
[ 4.204] (II) config/udev: Adding input device Lid Switch
(/dev/input/event1)
[ 4.204] (II) No input driver specified, ignoring this device.
[ 4.204] (II) This device may have been added with another device file.
[ 4.205] (II) config/udev: Adding input device Sleep Button
(/dev/input/event2)
[ 4.205] (**) Sleep Button: Applying InputClass "libinput keyboard
catchall"
[ 4.205] (II) Using input driver 'libinput' for 'Sleep Button'
[ 4.205] (**) Sleep Button: always reports core events
[ 4.205] (**) Option "Device" "/dev/input/event2"
[ 4.205] (**) Option "_source" "server/udev"
[ 4.206] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 4.206] (II) event2 - Sleep Button: device is a keyboard
[ 4.207] (II) event2 - Sleep Button: device removed
[ 4.228] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event2"
[ 4.228] (II) XINPUT: Adding extended input device "Sleep Button"
(type: KEYBOARD, id 8)
[ 4.228] (**) Option "xkb_model" "pc105"
[ 4.228] (**) Option "xkb_layout" "us"
[ 4.229] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 4.229] (II) event2 - Sleep Button: device is a keyboard
[ 4.230] (II) config/udev: Adding input device HDA Intel HDMI
HDMI/DP,pcm=3 (/dev/input/event14)
[ 4.231] (II) No input driver specified, ignoring this device.
[ 4.231] (II) This device may have been added with another device file.
[ 4.231] (II) config/udev: Adding input device HDA Intel HDMI
HDMI/DP,pcm=7 (/dev/input/event15)
[ 4.231] (II) No input driver specified, ignoring this device.
[ 4.231] (II) This device may have been added with another device file.
[ 4.231] (II) config/udev: Adding input device HDA Intel HDMI
HDMI/DP,pcm=8 (/dev/input/event16)
[ 4.231] (II) No input driver specified, ignoring this device.
[ 4.231] (II) This device may have been added with another device file.
[ 4.232] (II) config/udev: Adding input device HDA Intel HDMI
HDMI/DP,pcm=9 (/dev/input/event17)
[ 4.232] (II) No input driver specified, ignoring this device.
[ 4.232] (II) This device may have been added with another device file.
[ 4.232] (II) config/udev: Adding input device HDA Intel HDMI
HDMI/DP,pcm=10 (/dev/input/event18)
[ 4.232] (II) No input driver specified, ignoring this device.
[ 4.232] (II) This device may have been added with another device file.
[ 4.233] (II) config/udev: Adding input device Integrated Camera:
Integrated C (/dev/input/event7)
[ 4.233] (**) Integrated Camera: Integrated C: Applying InputClass
"libinput keyboard catchall"
[ 4.233] (II) Using input driver 'libinput' for 'Integrated Camera:
Integrated C'
[ 4.233] (**) Integrated Camera: Integrated C: always reports core
events
[ 4.233] (**) Option "Device" "/dev/input/event7"
[ 4.233] (**) Option "_source" "server/udev"
[ 4.235] (II) event7 - Integrated Camera: Integrated C: is tagged
by udev as: Keyboard
[ 4.235] (II) event7 - Integrated Camera: Integrated C: device is a
keyboard
[ 4.235] (II) event7 - Integrated Camera: Integrated C: device removed
[ 4.284] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input11/event7"
[ 4.284] (II) XINPUT: Adding extended input device "Integrated
Camera: Integrated C" (type: KEYBOARD, id 9)
[ 4.284] (**) Option "xkb_model" "pc105"
[ 4.284] (**) Option "xkb_layout" "us"
[ 4.287] (II) event7 - Integrated Camera: Integrated C: is tagged
by udev as: Keyboard
[ 4.287] (II) event7 - Integrated Camera: Integrated C: device is a
keyboard
[ 4.288] (II) config/udev: Adding input device HDA Digital PCBeep
(/dev/input/event8)
[ 4.288] (II) No input driver specified, ignoring this device.
[ 4.288] (II) This device may have been added with another device file.
[ 4.289] (II) config/udev: Adding input device HDA Intel PCH Dock
Mic (/dev/input/event9)
[ 4.289] (II) No input driver specified, ignoring this device.
[ 4.289] (II) This device may have been added with another device file.
[ 4.289] (II) config/udev: Adding input device HDA Intel PCH Mic
(/dev/input/event10)
[ 4.289] (II) No input driver specified, ignoring this device.
[ 4.289] (II) This device may have been added with another device file.
[ 4.290] (II) config/udev: Adding input device HDA Intel PCH Dock
Headphone (/dev/input/event11)
[ 4.290] (II) No input driver specified, ignoring this device.
[ 4.290] (II) This device may have been added with another device file.
[ 4.291] (II) config/udev: Adding input device HDA Intel PCH
Headphone (/dev/input/event12)
[ 4.291] (II) No input driver specified, ignoring this device.
[ 4.291] (II) This device may have been added with another device file.
[ 4.292] (II) config/udev: Adding input device AT Translated Set 2
keyboard (/dev/input/event0)
[ 4.292] (**) AT Translated Set 2 keyboard: Applying InputClass
"libinput keyboard catchall"
[ 4.292] (II) Using input driver 'libinput' for 'AT Translated Set 2
keyboard'
[ 4.292] (**) AT Translated Set 2 keyboard: always reports core events
[ 4.292] (**) Option "Device" "/dev/input/event0"
[ 4.292] (**) Option "_source" "server/udev"
[ 4.293] (II) event0 - AT Translated Set 2 keyboard: is tagged by
udev as: Keyboard
[ 4.293] (II) event0 - AT Translated Set 2 keyboard: device is a
keyboard
[ 4.293] (II) event0 - AT Translated Set 2 keyboard: device removed
[ 4.316] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 4.316] (II) XINPUT: Adding extended input device "AT Translated
Set 2 keyboard" (type: KEYBOARD, id 10)
[ 4.316] (**) Option "xkb_model" "pc105"
[ 4.316] (**) Option "xkb_layout" "us"
[ 4.318] (II) event0 - AT Translated Set 2 keyboard: is tagged by
udev as: Keyboard
[ 4.318] (II) event0 - AT Translated Set 2 keyboard: device is a
keyboard
[ 4.320] (II) config/udev: Adding input device PC Speaker
(/dev/input/event5)
[ 4.320] (II) No input driver specified, ignoring this device.
[ 4.320] (II) This device may have been added with another device file.
[ 4.321] (II) config/udev: Adding input device ThinkPad Extra
Buttons (/dev/input/event6)
[ 4.321] (**) ThinkPad Extra Buttons: Applying InputClass "libinput
keyboard catchall"
[ 4.321] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[ 4.321] (**) ThinkPad Extra Buttons: always reports core events
[ 4.321] (**) Option "Device" "/dev/input/event6"
[ 4.321] (**) Option "_source" "server/udev"
[ 4.323] (II) event6 - ThinkPad Extra Buttons: is tagged by udev
as: Keyboard Switch
[ 4.323] (II) event6 - ThinkPad Extra Buttons: device is a keyboard
[ 4.323] (II) event6 - ThinkPad Extra Buttons: device removed
[ 4.340] (**) Option "config_info"
"udev:/sys/devices/platform/thinkpad_acpi/input/input7/event6"
[ 4.340] (II) XINPUT: Adding extended input device "ThinkPad Extra
Buttons" (type: KEYBOARD, id 11)
[ 4.340] (**) Option "xkb_model" "pc105"
[ 4.340] (**) Option "xkb_layout" "us"
[ 4.342] (II) event6 - ThinkPad Extra Buttons: is tagged by udev
as: Keyboard Switch
[ 4.342] (II) event6 - ThinkPad Extra Buttons: device is a keyboard
[ 4.342] (II) config/udev: Adding input device Synaptics TM3053-003
(/dev/input/event4)
[ 4.342] (**) Synaptics TM3053-003: Applying InputClass "libinput
touchpad catchall"
[ 4.342] (**) Synaptics TM3053-003: Applying InputClass "touchpad
catchall"
[ 4.342] (**) Synaptics TM3053-003: Applying InputClass "Default
clickpad buttons"
[ 4.342] (II) LoadModule: "synaptics"
[ 4.343] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 4.344] (II) Module synaptics: vendor="X.Org Foundation"
[ 4.344] compiled for 1.20.1, module version = 1.9.1
[ 4.344] Module class: X.Org XInput Driver
[ 4.344] ABI class: X.Org XInput driver, version 24.1
[ 4.344] (II) Using input driver 'synaptics' for 'Synaptics TM3053-003'
[ 4.344] (**) Synaptics TM3053-003: always reports core events
[ 4.344] (**) Option "Device" "/dev/input/event4"
[ 4.380] (II) synaptics: Synaptics TM3053-003: found clickpad property
[ 4.380] (--) synaptics: Synaptics TM3053-003: x-axis range 0 - 1940
(res 20)
[ 4.380] (--) synaptics: Synaptics TM3053-003: y-axis range 0 - 1062
(res 20)
[ 4.380] (--) synaptics: Synaptics TM3053-003: pressure range 0 - 255
[ 4.380] (II) synaptics: Synaptics TM3053-003: device does not
report finger width.
[ 4.380] (--) synaptics: Synaptics TM3053-003: buttons: left double
triple
[ 4.381] (--) synaptics: Synaptics TM3053-003: Vendor 0x6cb Product 0
[ 4.381] (--) synaptics: Synaptics TM3053-003: invalid finger width
range. defaulting to 0 - 15
[ 4.381] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 4.381] (--) synaptics: Synaptics TM3053-003: touchpad found
[ 4.381] (**) Synaptics TM3053-003: always reports core events
[ 4.412] (**) Option "config_info"
"udev:/sys/devices/rmi4-00/input/input3/event4"
[ 4.412] (II) XINPUT: Adding extended input device "Synaptics
TM3053-003" (type: TOUCHPAD, id 12)
[ 4.412] (**) synaptics: Synaptics TM3053-003: (accel) MinSpeed is
now constant deceleration 2.5
[ 4.412] (**) synaptics: Synaptics TM3053-003: (accel) MaxSpeed is
now 1.75
[ 4.412] (**) synaptics: Synaptics TM3053-003: (accel) AccelFactor
is now 0.090
[ 4.413] (**) Synaptics TM3053-003: (accel) keeping acceleration
scheme 1
[ 4.413] (**) Synaptics TM3053-003: (accel) acceleration profile 1
[ 4.413] (**) Synaptics TM3053-003: (accel) acceleration factor: 2.000
[ 4.413] (**) Synaptics TM3053-003: (accel) acceleration threshold: 4
[ 4.413] (--) synaptics: Synaptics TM3053-003: touchpad found
[ 4.414] (II) config/udev: Adding input device Synaptics TM3053-003
(/dev/input/mouse0)
[ 4.414] (**) Synaptics TM3053-003: Ignoring device from InputClass
"touchpad ignore duplicates"
[ 4.415] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint
(/dev/input/event19)
[ 4.415] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput
pointer catchall"
[ 4.415] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'
[ 4.415] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 4.415] (**) Option "Device" "/dev/input/event19"
[ 4.415] (**) Option "_source" "server/udev"
[ 4.417] (II) event19 - TPPS/2 IBM TrackPoint: is tagged by udev as:
Mouse Pointingstick
[ 4.417] (II) event19 - TPPS/2 IBM TrackPoint: device is a pointer
[ 4.419] (II) event19 - TPPS/2 IBM TrackPoint: device removed
[ 4.460] (**) Option "config_info"
"udev:/sys/devices/rmi4-00/rmi4-00.fn03/serio2/input/input8/event19"
[ 4.460] (II) XINPUT: Adding extended input device "TPPS/2 IBM
TrackPoint" (type: MOUSE, id 13)
[ 4.461] (**) Option "AccelerationScheme" "none"
[ 4.461] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0
[ 4.461] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 4.461] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 4.463] (II) event19 - TPPS/2 IBM TrackPoint: is tagged by udev as:
Mouse Pointingstick
[ 4.463] (II) event19 - TPPS/2 IBM TrackPoint: device is a pointer
[ 4.466] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint
(/dev/input/mouse1)
[ 4.466] (II) No input driver specified, ignoring this device.
[ 4.466] (II) This device may have been added with another device file.
[ 6.048] (II) intel(0): EDID vendor "CMN", prod id 5571
[ 6.048] (II) intel(0): Printing DDC gathered Modelines:
[ 6.049] (II) intel(0): Modeline "1920x1080"x0.0 136.62 1920 1964
1992 2070 1080 1082 1086 1100 -hsync -vsync (66.0 kHz eP)
