Package: src:linux Version: 4.19.12-1 Severity: critical Tags: upstream Justification: breaks the whole system
Dear Maintainer, Submitting a bug report wherein after a kernel upgrade my laptop's SSD will, during use or idle, go into read-only mode after minutes or hours of uptime. It seems this is related to NVME/APSTE features (which I don't understand). Below are some similar reports for other models: https://groups.google.com/forum/#!searchin/linux.debian.bugs.dist/apst$20samsung|sort:date/linux.debian.bugs.dist/1AAKPI7rfQA/450TYup- AQAJ https://bbs.archlinux.org/viewtopic.php?id=232692 https://askubuntu.com/questions/905710/ext4-fs-error-after- ubuntu-17-04-upgrade/906105#906105 I had been running an older kernel (because I previously noticed this and associated it with a kernel upgrade) but over time forgot why I was using an old kernel. Some docker work required me to update my kernel again, the problem returned, and I was reminded of why I kept running the old kernel. I believe that linux-image-4.17.0-3-amd64 works fine for me (possibly now that I have disabled APSTE) but linux-image-4.19.0-1-amd64 does not. I don't know what version of kernel I was running previously, but I will boot back to 4.17.03 and use that for a time, and then update the bug report. * What led up to the situation? - Upgrading from an older 4.x kernel. I think 4.17 is fine, but will have to run for a while to be sure. * What exactly did you do (or not do) that was effective (or ineffective)? - No fixes found except for running older kernel. - Disabling APSTE with nvme_core.default_ps_max_latency_us=0 provides no relief, though it is reported as disabled by NVME tool. - There are no firmware updates available for this drive. -- Package-specific info: ** Version: Linux version 4.19.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-13)) #1 SMP Debian 4.19.12-1 (2018-12-22) ** Command line: BOOT_IMAGE=/vmlinuz-4.19.0-1-amd64 root=/dev/mapper/func--platform--vg-root ro quiet nvme_core.default_ps_max_latency_us=0 ** Tainted: OE (12288) * Out-of-tree module has been loaded. * Unsigned module has been loaded. ** Kernel log: [ 3.661043] Bluetooth: L2CAP socket layer initialized [ 3.661055] Bluetooth: SCO socket layer initialized [ 3.666339] usbcore: registered new interface driver btusb [ 3.690698] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.690699] Bluetooth: BNEP filters: protocol multicast [ 3.690702] Bluetooth: BNEP socket layer initialized [ 3.713324] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20 [ 3.713365] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21 [ 3.713400] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22 [ 3.713450] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23 [ 3.713507] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24 [ 3.715654] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25 [ 3.736832] input: Logitech Unifying Device. Wireless PID:2011 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.2/0003:046D:C52B.0008/0003:046D:2011.000A/input/input26 [ 3.737036] input: Logitech Unifying Device. Wireless PID:2011 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.2/0003:046D:C52B.0008/0003:046D:2011.000A/input/input27 [ 3.737096] input: Logitech Unifying Device. Wireless PID:2011 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.2/0003:046D:C52B.0008/0003:046D:2011.000A/input/input28 [ 3.737154] hid-generic 0003:046D:2011.000A: input,hidraw7: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:14.0-2.3:4 [ 3.738701] input: Logitech Unifying Device. Wireless PID:4055 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.2/0003:046D:C52B.0008/0003:046D:4055.000B/input/input32 [ 3.738766] hid-generic 0003:046D:4055.000B: input,hidraw8: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4055] on usb-0000:00:14.0-2.3:1 [ 3.752683] input: Logitech K520 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.2/0003:046D:C52B.0008/0003:046D:2011.000C/input/input36 [ 3.781508] Bluetooth: hci0: BCM: chip id 102 [ 3.782508] Bluetooth: hci0: BCM: features 0x2f [ 3.798526] Bluetooth: hci0: func-platform [ 3.799513] Bluetooth: hci0: BCM (001.001.005) build 0422 [ 3.801782] bluetooth hci0: firmware: direct-loading firmware brcm/BCM-0a5c-6410.hcd [ 3.847890] logitech-hidpp-device 0003:046D:2011.000C: input,hidraw9: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:00:14.0-2.3:2 [ 3.854718] input: Logitech K520 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.2/0003:046D:C52B.0008/0003:046D:2011.000D/input/input37 [ 3.874363] uvcvideo 1-2.1:1.2: Entity type for entity Extension 4 was not initialized! [ 3.874364] uvcvideo 1-2.1:1.2: Entity type for entity Processing 2 was not initialized! [ 3.874365] uvcvideo 1-2.1:1.2: Entity type for entity Camera 1 was not initialized! [ 3.874366] uvcvideo 1-2.1:1.2: Entity type for entity Extension 5 was not initialized! [ 3.874367] uvcvideo 1-2.1:1.2: Entity type for entity Extension 6 was not initialized! [ 3.874368] uvcvideo 1-2.1:1.2: Entity type for entity Extension 7 was not initialized! [ 3.874369] uvcvideo 1-2.1:1.2: Entity type for entity Extension 8 was not initialized! [ 3.874494] input: UVC Camera (046d:0823) as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.2/input/input38 [ 3.899963] logitech-hidpp-device 0003:046D:2011.000D: input,hidraw10: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:00:14.0-2.3:3 [ 3.901611] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6713) [ 3.906601] input: Logitech as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.2/0003:046D:C52B.0008/0003:046D:4055.000E/input/input39 [ 3.925608] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 3.929535] usb 3-1.3.3: New USB device found, idVendor=2109, idProduct=0100, bcdDevice= 1.22 [ 3.929537] usb 3-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.929538] usb 3-1.3.3: Product: USB 2.0 BILLBOARD [ 3.929540] usb 3-1.3.3: Manufacturer: VIA Technologies Inc. [ 3.929541] usb 3-1.3.3: SerialNumber: 0000000000000001 [ 3.936187] uvcvideo 1-12:1.0: Entity type for entity Extension 4 was not initialized! [ 3.936189] uvcvideo 1-12:1.0: Entity type for entity Extension 3 was not initialized! [ 3.936190] uvcvideo 1-12:1.0: Entity type for entity Processing 2 was not initialized! [ 3.936191] uvcvideo 1-12:1.0: Entity type for entity Camera 1 was not initialized! [ 3.936262] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input40 [ 3.951824] logitech-hidpp-device 0003:046D:4055.000E: input,hidraw7: USB HID v1.11 Mouse [Logitech ] on usb-0000:00:14.0-2.3:5 [ 3.951866] usbcore: registered new interface driver uvcvideo [ 3.951867] USB Video Class driver (1.1.1) [ 3.960750] input: Logitech K520 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.2/0003:046D:C52B.0008/0003:046D:2011.000A/input/input41 [ 3.960946] logitech-hidpp-device 0003:046D:2011.000A: input,hidraw11: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:00:14.0-2.3:4 [ 3.986723] usbcore: registered new interface driver snd-usb-audio [ 4.026646] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.2/0003:046D:C52B.0008/0003:046D:4055.000B/input/input42 [ 4.026860] logitech-hidpp-device 0003:046D:4055.000B: input,hidraw8: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:14.0-2.3:1 [ 4.067847] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 4.749645] Console: switching to colour frame buffer device 240x67 [ 4.775829] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 5.001435] Bluetooth: hci0: BCM (001.001.005) build 0422 [ 5.017435] Bluetooth: hci0: BCM20703A1 Generic USB 20Mhz fcbga_BU [ 5.764019] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04c680115: link becomes ready [ 5.764171] r8152 4-1.4:1.0 enx00e04c680115: carrier on [ 7.244011] vboxdrv: Found 8 processor cores [ 7.263729] vboxdrv: TSC mode is Invariant, tentative frequency 2592000813 Hz [ 7.263730] vboxdrv: Successfully loaded version 5.2.22_Debian (interface 0x00290001) [ 7.269797] VBoxNetFlt: Successfully started. [ 7.275622] VBoxNetAdp: Successfully started. [ 7.281880] VBoxPciLinuxInit [ 7.283883] vboxpci: IOMMU not found (not registered) [ 7.510450] kauditd_printk_skb: 16 callbacks suppressed [ 7.510451] audit: type=1400 audit(1546542346.808:27): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1267 comm="apparmor_parser" [ 7.641604] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 7.642839] Bridge firewalling registered [ 7.678030] Initializing XFRM netlink socket [ 7.707455] IPv6: ADDRCONF(NETDEV_UP): br-71d90485f4ea: link is not ready [ 7.768733] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 8.998665] fuse init (API version 7.27) [ 9.375971] usb-storage 3-1.3.1:1.0: USB Mass Storage device detected [ 9.376396] scsi host2: usb-storage 3-1.3.1:1.0 [ 9.376470] usbcore: registered new interface driver usb-storage [ 9.379003] usbcore: registered new interface driver uas [ 10.362607] logitech-hidpp-device 0003:046D:4055.000E: HID++ 4.5 device connected. [ 10.389080] scsi 2:0:0:0: Direct-Access Generic STORAGE DEVICE 0233 PQ: 0 ANSI: 0 [ 10.396344] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 10.398396] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 11.838747] logitech-hidpp-device 0003:046D:2011.000A: HID++ 1.0 device connected. [ 14.266640] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 14.619243] Thunar[1699]: segfault at 18 ip 00007f61d7414db0 sp 00007ffd4fab9248 error 4 in libgtk-3.so.0.2402.0[7f61d71cf000+352000] [ 14.619255] Code: dc ff 48 8b 44 24 08 64 48 33 04 25 28 00 00 00 75 0f 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e 41 5f c3 e8 84 ee db ff 0f 1f 40 00 <48> 8b 47 18 48 8b 40 10 c3 0f 1f 80 00 00 00 00 53 48 8b 5f 18 48 [ 15.667597] psmouse serio1: Failed to deactivate mouse on isa0060/serio1: -5 [ 16.155624] psmouse serio1: Failed to enable mouse on isa0060/serio1 [ 17.015827] usb 1-2.1: reset high-speed USB device number 5 using xhci_hcd [ 18.275627] Bluetooth: RFCOMM TTY layer initialized [ 18.275632] Bluetooth: RFCOMM socket layer initialized [ 18.275637] Bluetooth: RFCOMM ver 1.11 [ 20.435775] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input2 [ 20.582024] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 20.639623] psmouse serio1: Failed to enable mouse on isa0060/serio1 [ 20.678651] brcmfmac: brcmf_inetaddr_changed: fail to get arp ip table err:-52 ** Model information sys_vendor: Dell Inc. product_name: XPS 15 9550 product_version: chassis_vendor: Dell Inc. chassis_version: bios_vendor: Dell Inc. bios_version: 01.01.19 board_vendor: Dell Inc. board_name: 0N7TVV board_version: A00 ** Loaded modules: rfcomm sg sd_mod uas usb_storage fuse nf_conntrack_netlink xfrm_user xfrm_algo xt_addrtype br_netfilter bridge stp llc overlay pci_stub vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) nft_chain_nat_ipv4 ipt_MASQUERADE xt_state xt_conntrack ipt_REJECT nf_reject_ipv4 nft_counter xt_tcpudp nft_compat nf_tables nfnetlink nf_nat_h323 nf_conntrack_h323 nf_nat_pptp nf_nat_proto_gre nf_conntrack_pptp nf_conntrack_proto_gre nf_nat_tftp nf_conntrack_tftp nf_nat_sip nf_conntrack_sip nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c cmac hid_logitech_hidpp snd_hda_codec_hdmi bnep btusb btrtl btbcm btintel bluetooth snd_hda_codec_realtek drbg snd_usb_audio snd_hda_codec_generic uvcvideo videobuf2_vmalloc ansi_cprng videobuf2_memops snd_usbmidi_lib videobuf2_v4l2 snd_rawmidi snd_seq_device videobuf2_common ecdh_generic videodev hid_logitech_dj media bbswitch(OE) cdc_ether usbnet r8152 mii joydev binfmt_misc intel_rapl x86_pkg_temp_thermal wmi_bmof dell_wmi mxm_wmi intel_powerclamp kvm_intel kvm irqbypass dell_laptop crct10dif_pclmul crc32_pclmul dell_smbios dell_wmi_descriptor ghash_clmulni_intel hid_multitouch evdev dcdbas serio_raw intel_cstate i915 snd_hda_intel brcmfmac snd_hda_codec brcmutil snd_hda_core intel_uncore snd_hwdep cfg80211 snd_pcm intel_rapl_perf snd_timer rtsx_pci_ms iTCO_wdt snd iTCO_vendor_support drm_kms_helper memstick rfkill soundcore pcspkr drm mei_me idma64 tpm_tis tpm_tis_core mei tpm processor_thermal_device intel_pch_thermal i2c_algo_bit intel_soc_dts_iosf rng_core battery int3403_thermal wmi video int3402_thermal int340x_thermal_zone ac intel_hid int3400_thermal acpi_thermal_rel acpi_pad sparse_keymap button pcc_cpufreq coretemp parport_pc ppdev lp parport ip_tables x_tables autofs4 usbhid ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb dm_mod hid_generic crc32c_intel rtsx_pci_sdmmc mmc_core ahci libahci nvme xhci_pci libata aesni_intel xhci_hcd aes_x86_64 crypto_simd psmouse cryptd glue_helper usbcore scsi_mod nvme_core i2c_i801 rtsx_pci i2c_hid intel_lpss_pci usb_common intel_lpss hid thermal fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Skylake Host Bridge/DRAM Registers [8086:1910] (rev 07) Subsystem: Dell Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (XPS 15 9550) [1028:06e4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: skl_uncore 00:01.0 PCI bridge [0604]: Intel Corporation Skylake PCIe Controller (x16) [8086:1901] (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: dc000000-dd0fffff Prefetchable memory behind bridge: 00000000b0000000-00000000c1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 530 [8086:191b] (rev 06) (prog-if 00 [VGA controller]) Subsystem: Dell HD Graphics 530 (XPS 15 9550) [1028:06e4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 136 Region 0: Memory at db000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at 70000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=64] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:04.0 Signal processing controller [1180]: Intel Corporation Skylake Processor Thermal Subsystem [8086:1903] (rev 07) Subsystem: Dell Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (XPS 15 9550) [1028:06e4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at dd120000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: proc_thermal Kernel modules: processor_thermal_device 00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller [8086:a12f] (rev 31) (prog-if 30 [XHCI]) Subsystem: Dell 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (XPS 15 9550) [1028:06e4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 123 Region 0: Memory at dd110000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-H Thermal subsystem [8086:a131] (rev 31) Subsystem: Dell 100 Series/C230 Series Chipset Family Thermal Subsystem (XPS 15 9550) [1028:06e4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at dd138000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel_pch_thermal Kernel modules: intel_pch_thermal 00:15.0 Signal processing controller [1180]: Intel Corporation Sunrise Point-H Serial IO I2C Controller #0 [8086:a160] (rev 31) Subsystem: Dell 100 Series/C230 Series Chipset Family Serial IO I2C Controller [1028:06e4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at dd137000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel-lpss Kernel modules: intel_lpss_pci 00:15.1 Signal processing controller [1180]: Intel Corporation Sunrise Point-H Serial IO I2C Controller #1 [8086:a161] (rev 31) Subsystem: Dell 100 Series/C230 Series Chipset Family Serial IO I2C Controller [1028:06e4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 128 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at dd136000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel-lpss Kernel modules: intel_lpss_pci 00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-H CSME HECI #1 [8086:a13a] (rev 31) Subsystem: Dell 100 Series/C230 Series Chipset Family MEI Controller [1028:06e4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 135 Region 0: Memory at dd135000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: mei_me Kernel modules: mei_me 00:17.0 RAID bus controller [0104]: Intel Corporation 82801 Mobile SATA Controller [RAID mode] [8086:282a] (rev 31) Subsystem: Dell 82801 Mobile SATA Controller [RAID mode] [1028:06e4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 125 Region 0: Memory at dd130000 (32-bit, non-prefetchable) [size=8K] Region 1: Memory at dd134000 (32-bit, non-prefetchable) [size=256] Region 2: I/O ports at f090 [size=8] Region 3: I/O ports at f080 [size=4] Region 4: I/O ports at f060 [size=32] Region 5: Memory at dd133000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #1 [8086:a110] (rev f1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: dd400000-dd8fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #2 [8086:a111] (rev f1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: dda00000-de3fffff Prefetchable memory behind bridge: 00000000c2100000-00000000c2afffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #9 [8086:a118] (rev f1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: de400000-de4fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.4 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #13 [8086:a11c] (rev f1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.6 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #15 [8086:a11e] (rev f1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Bus: primary=00, secondary=06, subordinate=3e, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: c4000000-da0fffff Prefetchable memory behind bridge: 0000000080000000-00000000a1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-H LPC Controller [8086:a14e] (rev 31) Subsystem: Dell HM170 Chipset LPC/eSPI Controller (XPS 15 9550) [1028:06e4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-H PMC [8086:a121] (rev 31) Subsystem: Dell 100 Series/C230 Series Chipset Family Power Management Controller (XPS 15 9550) [1028:06e4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at dd12c000 (32-bit, non-prefetchable) [size=16K] 00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-H HD Audio [8086:a170] (rev 31) (prog-if 80) Subsystem: Dell 100 Series/C230 Series Chipset Family HD Audio Controller [1028:06e4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 138 Region 0: Memory at dd128000 (64-bit, non-prefetchable) [size=16K] Region 4: Memory at dd100000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-H SMBus [8086:a123] (rev 31) Subsystem: Dell 100 Series/C230 Series Chipset Family SMBus (XPS 15 9550) [1028:06e4] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 16 Region 0: Memory at dd132000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at f040 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 01:00.0 3D controller [0302]: NVIDIA Corporation GM107M [GeForce GTX 960M] [10de:139b] (rev ff) (prog-if ff) !!! Unknown header type 7f Kernel modules: nvidia 02:00.0 Network controller [0280]: Broadcom Limited BCM43602 802.11ac Wireless LAN SoC [14e4:43ba] (rev 01) Subsystem: Dell BCM43602 802.11ac Wireless LAN SoC [1028:0024] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 137 Region 0: Memory at dd800000 (64-bit, non-prefetchable) [size=32K] Region 2: Memory at dd400000 (64-bit, non-prefetchable) [size=4M] Capabilities: <access denied> Kernel driver in use: brcmfmac Kernel modules: brcmfmac 03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader [10ec:525a] (rev 01) Subsystem: Dell RTS525A PCI Express Card Reader (XPS 15 9550) [1028:06e4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 122 Region 1: Memory at dda00000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: rtsx_pci Kernel modules: rtsx_pci 04:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller [144d:a802] (rev 01) (prog-if 02 [NVM Express]) Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller SM951/PM951 [144d:a801] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 NUMA node: 0 Region 0: Memory at de400000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at c000 [size=256] Capabilities: <access denied> Kernel driver in use: nvme Kernel modules: nvme 06:00.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3 Bridge [Alpine Ridge 2C 2015] [8086:1576] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 18 Bus: primary=06, secondary=07, subordinate=3e, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: c4000000-da0fffff Prefetchable memory behind bridge: 0000000080000000-00000000a1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 07:00.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3 Bridge [Alpine Ridge 2C 2015] [8086:1576] (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 18 Bus: primary=07, secondary=08, subordinate=08, sec-latency=0 Memory behind bridge: da000000-da0fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 07:01.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3 Bridge [Alpine Ridge 2C 2015] [8086:1576] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 19 Bus: primary=07, secondary=09, subordinate=3d, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: c4000000-d9efffff Prefetchable memory behind bridge: 0000000080000000-00000000a1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 07:02.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3 Bridge [Alpine Ridge 2C 2015] [8086:1576] (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 16 Bus: primary=07, secondary=3e, subordinate=3e, sec-latency=0 Memory behind bridge: d9f00000-d9ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 3e:00.0 USB controller [0c03]: Intel Corporation DSL6340 USB 3.1 Controller [Alpine Ridge] [8086:15b5] (prog-if 30 [XHCI]) Subsystem: Device [2222:1111] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 126 Region 0: Memory at d9f00000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci ** USB devices: Bus 004 Device 003: ID 0bda:8153 Realtek Semiconductor Corp. Bus 004 Device 002: ID 2109:0813 VIA Labs, Inc. Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 006: ID 2109:0100 VIA Labs, Inc. Bus 003 Device 005: ID 05e3:0752 Genesys Logic, Inc. Bus 003 Device 004: ID 05e3:0618 Genesys Logic, Inc. Bus 003 Device 003: ID 1050:0116 Yubico.com Yubikey NEO(-N) OTP+U2F+CCID Bus 003 Device 002: ID 2109:2813 VIA Labs, Inc. Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 0424:5537 Standard Microsystems Corp. Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0a5c:6410 Broadcom Corp. Bus 001 Device 008: ID 04d8:0b2a Microchip Technology, Inc. Bus 001 Device 007: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 001 Device 005: ID 046d:0823 Logitech, Inc. Bus 001 Device 003: ID 0424:2137 Standard Microsystems Corp. Bus 001 Device 006: ID 0c45:6713 Microdia Bus 001 Device 002: ID 1050:0407 Yubico.com Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.19.0-1-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-4.19.0-1-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.132 ii kmod 25-2 ii linux-base 4.5 Versions of packages linux-image-4.19.0-1-amd64 recommends: ii apparmor 2.13.1-3+b1 ii firmware-linux-free 3.4 ii irqbalance 1.5.0-0.1 Versions of packages linux-image-4.19.0-1-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02+dfsg1-9 pn linux-doc-4.19 <none> Versions of packages linux-image-4.19.0-1-amd64 is related to: ii firmware-amd-graphics 20180825+dfsg-1 pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> ii firmware-brcm80211 20180825+dfsg-1 pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux-nonfree 20180825+dfsg-1 ii firmware-misc-nonfree 20180825+dfsg-1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
