Hi Matthias, > Matthias Luescher <luesc...@gmail.com> hat am 1. Dezember 2018 um 22:38 > geschrieben: > > > Hi Stefan > > > i want to play safe. Could you please check the Rev of your 3 B board? > > You can find it on the upside of the PCB below the GPIO pin header (e.g. > i have Rev 1.2). > > Mine is also a "Raspberry Pi 3 Model B V1.2". > > > Could you please provide a complete dmesg in case wlan0 is absent? > > Here is the dmesg without wlan0: > https://drive.google.com/open?id=1O-aYZreN_7ziHiVsxMc-zNoMAwKLB-UV > > And here is one with wlan0: > https://drive.google.com/open?id=1rD2BcEbxjxrpyrXqRglkyS3t1VkCXJ6l
very strange. Only in the case CONFIG_MMC_SDHCI_IPROC=m the power sequence seems to be active: [ 2.244705] sdhci-iproc 3f300000.sdhci: allocated mmc-pwrseq So after fixing the polarity of the wifi-reset everything works as expected. - reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>; + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; I think this should be acceptable as a stable fix for 4.19 LTS. Stefan > > > Could you please change your config to: > > CONFIG_MMC_SDHCI_IPROC=y > > This change does indeed make wlan0 appear! Unfortunately this is probably > not a viable solution for the (generic) arm64 Debian kernel. > > Many thanks already for your great support! > > Best regards > Matthias
