Grant Grundler wrote: > I realize now that the 2.6.12 "cat /proc/ioports" output in this > bug (332962) doesn't list sym53c8xx driver. > Is there maybe something fundemental wrong with module loading? > ie can sym53c8xx driver be loaded?
I'm booting 2.6.12 with the d-i netboot install image, and since there's no network, it's not downloaded the disk drivers yet. If you really need to know if sym53c8xx loads ok, I can make a custom netboot image that includes the module and try to load it though.. > > http://dilab.debian.net:800/~joey/d-i/logs/hppa/bison-dns-server-d-i-26.log > > Unfortunately, this console log isn't that useful. The interesting > stuff wasn't directed to the console (modprobe tulip output) and > much of the boot output was obscured by the bloody "Virtual Front > Panel" (VFP). Can you add "pdcchassis=0" to the kernel boot > command line and try again? > > Or capture "dmesg" output once the 2.6.12 Install ISO can get to > a shell prompt. The goal here is to capture any messages spewed > by PCI subsystem during initialization and verify that the > tulip driver only spews driver version and never finds > any devices. Sorry, didn't realize the log was quite that broken. Here's a better one. Unfortunatly, without a network (and no CD drive on my a500 either), I'm limited to copy and paste. ~ # dmesg Linux version 2.6.12-1-parisc64 ([EMAIL PROTECTED]) (gcc version 4.0.2 (Debian 4.0.1- 9)) #1 Tue Sep 27 12:08:15 UTC 2005 FP[0] enabled: Rev 1 Model 16 The 64-bit Kernel has started... Initialized PDC Console for debugging. Determining PDC firmware type: 64 bit PAT. model 00005d50 00000491 00000000 00000001 214e297e 100000f0 00000008 000000b2 00 0000b2 vers 00000301 CPUID vers 18 rev 11 (0x0000024b) capabilities 0x1 model 9000/800/A500-5X Total Memory: 2048 MB initrd: 4fd87000-4ffeed10 initrd: reserving 3fd87000-3ffeed10 (mem_max 80000000) On node 0 totalpages: 524288 DMA zone: 524288 pages, LIFO batch:31 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 Built 1 zonelists Kernel command line: preseed/url=http://chicken/~joey/d-i/preseed/test-net.cfg r oot=/dev/ram0 ramdisk_size=8734 console=ttyS0 TERM=vt102 palo_kernel=0/linux PID hash table entries: 4096 (order: 12, 131072 bytes) Console: colour dummy device 160x64 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Memory: 2097152k available Calibrating delay loop... 1093.63 BogoMIPS (lpj=546816) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 256 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd NET: Registered protocol family 16 EISA bus registered Searching for devices... Found devices: 1. Crescendo 550 at 0xfffffffffffa0000 [160] { 0, 0x0, 0x5d5, 0x00004 } 2. Crescendo 550 at 0xfffffffffffa2000 [162] { 0, 0x0, 0x5d5, 0x00004 } 3. Memory at 0xfffffffffed08000 [8] { 1, 0x0, 0x09b, 0x00009 } 4. Astro BC Runway Port at 0xfffffffffed00000 [0] { 12, 0x0, 0x582, 0x0000b } 5. Elroy PCI Bridge at 0xfffffffffed30000 [0/0] { 13, 0x0, 0x782, 0x0000a } 6. Elroy PCI Bridge at 0xfffffffffed34000 [0/2] { 13, 0x0, 0x782, 0x0000a } 7. Elroy PCI Bridge at 0xfffffffffed38000 [0/4] { 13, 0x0, 0x782, 0x0000a } 8. Elroy PCI Bridge at 0xfffffffffed3c000 [0/6] { 13, 0x0, 0x782, 0x0000a } Enabling PDC_PAT chassis codes support. CONFIG_SMP=n ignoring additional CPUs CPU: probe of 162 failed with error 1 CPU(s): 1 x PA8600 (PCX-W+) at 550.000000 MHz Whole cache flush 340145 cycles, flushing 274493832 bytes 44413898 cycles Setting cache flush threshold to 201400 (1 CPUs online) SBA found Astro 2.1 at 0xfffffffffed00000 LBA version TR4.0 (0x5) found at 0xfffffffffed30000 LBA version TR4.0 (0x5) found at 0xfffffffffed34000 LBA version TR4.0 (0x5) found at 0xfffffffffed38000 LBA version TR4.0 (0x5) found at 0xfffffffffed3c000 SCSI subsystem initialized TC classifier action (bugs to netdev@vger.kernel.org cc [EMAIL PROTECTED]) unwind_init: start = 0x103cbc40, end = 0x103ebf60, entries = 8242 Performance monitoring counters enabled for Crescendo 550 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x0 Initializing Cryptographic API PDC Stable Storage facility v0.09 Soft power switch support not available. STI GSC/PCI core graphics driver Version 0.9a Generic RTC Driver v1.07 Serial: 8250/16550 driver $Revision: 1.90 $ 13 ports, IRQ sharing enabled ttyS0 at MMIO 0xfffffffff8000000 (irq = 69) is a 16550A ttyS1 at MMIO 0xfffffffff8000008 (irq = 69) is a 16550A ttyS2 at MMIO 0xfffffffff8000010 (irq = 69) is a 16550A ttyS3 at MMIO 0xfffffffff8007000 (irq = 70) is a 16550A ttyS4 at MMIO 0xfffffffff8007008 (irq = 70) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 8734K size 1024 blocksize mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP: routing cache hash table of 16384 buckets, 128Kbytes TCP established hash table entries: 524288 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 524288 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 380k freed Linux Tulip driver version 1.1.13 (December 15, 2004) ~ # Here for comparison are the lines after tulip for 2.6.8: tulip0: no phy info, aborting mtable build tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1. eth0: Digital DS21143 Tulip rev 65 at 0xfffffffff8020000, 00:30:6E:1C:90:2E, IR NET: Registered protocol family 17 eth0: Setting full-duplex based on MII#1 link partner capability of45e1. I can also give out remote access to this machine including the console BTW. -- see shy jo
signature.asc
Description: Digital signature
