Package: src:linux Version: 4.11.6-1 Severity: important File: nouveau Dear Maintainer,
I performed a fresh installation from the 2017-07-04 daily d-i netinst on amd64. After booting into the system, messages appeared on the console / syslog about task kworker blocked for more than 120 seconds. The stack trace most notably included nouveau_pmops_runtime_suspend as a likely culprit. Shutting down or rebooting the system through normal means (e.g. shutdown -(h|r)) would apparently never succeed, repeating a similar message. I found an old thread[1] that recommended booting with nouveau.runpm=0, so I tried that. It appears to have remedied the situation. [1] https://lists.gt.net/linux/kernel/2312697 -- Package-specific info: ** Version: Linux version 4.11.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.11.6-1 (2017-06-19) ** Command line: BOOT_IMAGE=/boot/vmlinuz-4.11.0-1-amd64 root=UUID=65cc09ff-bde8-4e73-9cb0-8bc3a5549087 ro nouveau.runpm=0 quiet ** Not tainted ** Kernel log: [ 3.473899] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7 [ 3.473900] ACPI: Power Button [PWRB] [ 3.473932] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8 [ 3.473933] ACPI: Power Button [PWRF] [ 3.474152] tpm_inf_pnp 00:09: Found TPM with ID IFX0102 [ 3.483453] wmi: Mapper loaded [ 3.486381] EFI Variables Facility v0.08 2004-May-17 [ 3.488308] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.490255] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 3.493255] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 3.553070] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.553250] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 3.555977] iTCO_vendor_support: vendor-support=0 [ 3.557290] pstore: using zlib compression [ 3.557820] pstore: Registered efi as persistent store backend [ 3.558212] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 3.558950] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400) [ 3.559450] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 3.564518] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 3.564519] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 3.564519] RAPL PMU: hw unit of domain package 2^-14 Joules [ 3.564520] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 3.564520] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 3.564521] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 3.578328] ppdev: user-space parallel port driver [ 3.579138] [drm] Memory usable by graphics device = 4096M [ 3.579140] checking generic (f0000000 760000) vs hw (1ff0000000 10000000) [ 3.579141] [drm] Replacing VGA console driver [ 3.579427] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95) [ 3.579593] checking generic (f0000000 760000) vs hw (c0000000 10000000) [ 3.579594] checking generic (f0000000 760000) vs hw (d0000000 2000000) [ 3.580063] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: user_xattr [ 3.580125] nouveau 0000:01:00.0: NVIDIA GP107 (137000a1) [ 3.611506] hp_wmi: query 0x4 returned error 0x5 [ 3.636319] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.636319] [drm] Driver supports precise vblank timestamp query. [ 3.668908] intel_rapl: Found RAPL domain package [ 3.668908] intel_rapl: Found RAPL domain core [ 3.668909] intel_rapl: Found RAPL domain uncore [ 3.668909] intel_rapl: Found RAPL domain dram [ 3.690086] nouveau 0000:01:00.0: bios: version 86.07.39.00.0b [ 3.691359] hp_wmi: query 0x4 returned error 0x5 [ 3.692510] hp_wmi: query 0xd returned error 0x5 [ 3.692537] input: HP WMI hotkeys as /devices/virtual/input/input9 [ 3.693753] nouveau 0000:01:00.0: fb: 2048 MiB GDDR5 [ 3.693761] nouveau 0000:01:00.0: priv: HUB0: 00d054 00000007 (1f408216) [ 3.693914] hp_wmi: query 0x5 returned error 0x3 [ 3.694939] [TTM] Zone kernel: Available graphics memory: 8108870 kiB [ 3.694939] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 3.694939] [TTM] Initializing pool allocator [ 3.694941] [TTM] Initializing DMA pool allocator [ 3.694950] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB [ 3.694951] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 3.694952] nouveau 0000:01:00.0: DRM: BIT table 'A' not found [ 3.694953] nouveau 0000:01:00.0: DRM: BIT table 'L' not found [ 3.694953] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 3.694954] nouveau 0000:01:00.0: DRM: DCB version 4.1 [ 3.694955] nouveau 0000:01:00.0: DRM: DCB outp 00: 01800f56 04600020 [ 3.694956] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000f52 04620020 [ 3.694956] nouveau 0000:01:00.0: DRM: DCB outp 02: 01811f46 04600010 [ 3.694957] nouveau 0000:01:00.0: DRM: DCB outp 03: 01011f42 04620010 [ 3.694957] nouveau 0000:01:00.0: DRM: DCB outp 04: 02822f76 04600020 [ 3.694958] nouveau 0000:01:00.0: DRM: DCB outp 05: 02022f72 00020020 [ 3.694958] nouveau 0000:01:00.0: DRM: DCB conn 00: 00002046 [ 3.694959] nouveau 0000:01:00.0: DRM: DCB conn 01: 00001146 [ 3.694959] nouveau 0000:01:00.0: DRM: DCB conn 02: 00020246 [ 3.694960] nouveau 0000:01:00.0: DRM: Pointer to flat panel table invalid [ 3.696968] i915 0000:00:02.0: firmware: direct-loading firmware i915/skl_dmc_ver1_26.bin [ 3.697240] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26) [ 3.710556] hp_wmi: query 0x1b returned error 0x3 [ 3.710996] nouveau 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none [ 3.710998] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 3.768007] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.768007] [drm] Driver supports precise vblank timestamp query. [ 3.768165] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: user_xattr [ 3.884580] nouveau 0000:01:00.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 3.922066] nouveau 0000:01:00.0: DRM: failed to create kernel channel, -22 [ 3.979946] [drm] failed to retrieve link info, disabling eDP [ 3.980346] i915 0000:00:02.0: firmware: failed to load i915/skl_huc_ver01_07_1398.bin (-2) [ 3.980408] i915 0000:00:02.0: Direct firmware load for i915/skl_huc_ver01_07_1398.bin failed with error -2 [ 3.980409] [drm] Failed to fetch valid uC firmware from i915/skl_huc_ver01_07_1398.bin (error -2) [ 3.981316] [drm] GuC firmware load skipped [ 3.996511] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 4.064075] random: crng init done [ 4.148259] [drm] Cannot find any crtc or sizes - going 1024x768 [ 4.149901] nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x60000, bo ffff99ffeb379800 [ 4.152273] checking generic (f0000000 760000) vs hw (0 0) [ 4.152404] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device [ 4.188296] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1 [ 4.188694] [drm] Initialized i915 1.6.0 20170123 for 0000:00:02.0 on minor 0 [ 4.197232] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.197567] acpi device:07: registered as cooling_device9 [ 4.197618] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10 [ 4.225834] checking generic (f0000000 760000) vs hw (1ff0000000 10000000) [ 4.225914] fbcon: inteldrmfb (fb2) is primary device [ 4.225914] fbcon: Remapping primary device, fb2, to tty 1-63 [ 5.824632] [drm] RC6 on [ 6.574169] i915 0000:00:02.0: fb2: inteldrmfb frame buffer device [ 6.866732] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 6.866791] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready ** Model information sys_vendor: HP product_name: HP Z240 Tower Workstation product_version: chassis_vendor: HP chassis_version: bios_vendor: HP bios_version: N51 Ver. 01.58 board_vendor: HP board_name: 802F board_version: ** Loaded modules: intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul hp_wmi sparse_keymap rfkill nouveau ghash_clmulni_intel nls_ascii ppdev i915 intel_cstate mxm_wmi nls_cp437 intel_uncore ttm vfat fat joydev iTCO_wdt drm_kms_helper efi_pstore iTCO_vendor_support evdev intel_rapl_perf sg mei_me drm i2c_algo_bit mei intel_pch_thermal shpchp serio_raw efivars wmi parport_pc parport video tpm_infineon button acpi_pad efivarfs ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic fscrypto ecb mbcache sr_mod sd_mod cdrom hid_generic usbhid hid crc32c_intel aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ahci libahci e1000e xhci_pci psmouse ptp xhci_hcd libata pps_core i2c_i801 nvme nvme_core scsi_mod usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Skylake Host Bridge/DRAM Registers [8086:191f] (rev 07) Subsystem: Hewlett-Packard Company Skylake Host Bridge/DRAM Registers [103c:802f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: skl_uncore 00:01.0 PCI bridge [0604]: Intel Corporation Skylake PCIe Controller (x16) [8086:1901] (rev 07) (prog-if 00 [Normal decode]) Physical Slot: 2 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 122 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: d3000000-d40fffff Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 530 [8086:1912] (rev 06) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company HD Graphics 530 [103c:802f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 137 Region 0: Memory at d2000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at 1ff0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 4000 [size=64] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller [8086:a12f] (rev 31) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company Sunrise Point-H USB 3.0 xHCI Controller [103c:802f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 125 Region 0: Memory at d4220000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-H Thermal subsystem [8086:a131] (rev 31) Subsystem: Hewlett-Packard Company Sunrise Point-H Thermal subsystem [103c:802f] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at d4236000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel_pch_thermal Kernel modules: intel_pch_thermal 00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-H CSME HECI #1 [8086:a13a] (rev 31) Subsystem: Hewlett-Packard Company Sunrise Point-H CSME HECI [103c:802f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 135 Region 0: Memory at d4237000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: mei_me Kernel modules: mei_me 00:16.3 Serial controller [0700]: Intel Corporation Sunrise Point-H KT Redirection [8086:a13d] (rev 31) (prog-if 02 [16550]) Subsystem: Hewlett-Packard Company Sunrise Point-H KT Redirection [103c:802f] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin D routed to IRQ 19 Region 0: I/O ports at 4080 [size=8] Region 1: Memory at d423b000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial 00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-H SATA controller [AHCI mode] [8086:a102] (rev 31) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Sunrise Point-H SATA controller [AHCI mode] [103c:802f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 127 Region 0: Memory at d4234000 (32-bit, non-prefetchable) [size=8K] Region 1: Memory at d423a000 (32-bit, non-prefetchable) [size=256] Region 2: I/O ports at 4088 [size=8] Region 3: I/O ports at 4090 [size=4] Region 4: I/O ports at 4060 [size=32] Region 5: Memory at d4238000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:1b.0 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Root Port #17 [8086:a167] (rev f1) (prog-if 00 [Normal decode]) Physical Slot: 6 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 123 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: d4100000-d41fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-H LPC Controller [8086:a149] (rev 31) Subsystem: Hewlett-Packard Company Sunrise Point-H LPC Controller [103c:802f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-H PMC [8086:a121] (rev 31) Subsystem: Hewlett-Packard Company Sunrise Point-H PMC [103c:802f] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at d4230000 (32-bit, non-prefetchable) [disabled] [size=16K] 00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-H SMBus [8086:a123] (rev 31) Subsystem: Hewlett-Packard Company Sunrise Point-H SMBus [103c:802f] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 16 Region 0: Memory at d4239000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at efa0 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (2) I219-LM [8086:15b7] (rev 31) Subsystem: Hewlett-Packard Company Ethernet Connection (2) I219-LM [103c:802f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 126 Region 0: Memory at d4200000 (32-bit, non-prefetchable) [size=128K] Capabilities: <access denied> Kernel driver in use: e1000e Kernel modules: e1000e 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:1cb3] (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device [10de:11be] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 136 Region 0: Memory at d3000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at d0000000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at 3000 [size=128] Expansion ROM at d4080000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nouveau Kernel modules: nouveau 01:00.1 Audio device [0403]: NVIDIA Corporation Device [10de:0fb9] (rev a1) Subsystem: NVIDIA Corporation Device [10de:11be] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 255 Region 0: Memory at d4000000 (32-bit, non-prefetchable) [disabled] [size=16K] Capabilities: <access denied> Kernel modules: snd_hda_intel 02:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 [144d:a804] (prog-if 02 [NVM Express]) Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 [144d:a801] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 NUMA node: 0 Region 0: Memory at d4100000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: nvme Kernel modules: nvme ** USB devices: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 03f0:134a Hewlett-Packard Optical Mouse Bus 001 Device 002: ID 03f0:344a Hewlett-Packard Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 4.11.0-1-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.11.0-1-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.130 ii kmod 24-1 ii linux-base 4.5 Versions of packages linux-image-4.11.0-1-amd64 recommends: pn firmware-linux-free <none> pn irqbalance <none> Versions of packages linux-image-4.11.0-1-amd64 suggests: pn debian-kernel-handbook <none> ii grub-efi-amd64 2.02-2 pn linux-doc-4.11 <none> Versions of packages linux-image-4.11.0-1-amd64 is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> ii firmware-misc-nonfree 20161130-3 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
