Package: src:linux Version: 3.2.89-1 Severity: important Dear Maintainer,
Steps to reproduce: 1. Install Debian 7 2. Install Scilab (apt-get install scilab), ensure it runs normally 3. Get new kernel with new updates (3.2.89-1). 4a. Try to start Scilab from GUI - it crashes. 4b. Try to start Scilab from terminal - it reports "Segmentation fault (core dumped)" Expected results: * Scilab is working normally with new kernel. Actual results: * Scilab crashed. Notes: * Scilab works normally with old kernels - for example with 3.2.78-1. * This may be related to CVE-2017-1000364 (https://bugs.launchpad.net/bugs/1698919) fix. Links: https://bugs.debian.org/865522 https://bugs.launchpad.net/bugs/1699892 -- Package-specific info: ** Version: Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.89-1 ** Command line: BOOT_IMAGE=/vmlinuz root=/dev/sda6 ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [ 1.044753] ohci_hcd 0000:00:06.0: OHCI Host Controller [ 1.045207] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2 [ 1.045971] ohci_hcd 0000:00:06.0: irq 11, io mem 0xf0804000 [ 1.102416] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.103503] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.105006] usb usb2: Product: OHCI Host Controller [ 1.106981] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd [ 1.108438] usb usb2: SerialNumber: 0000:00:06.0 [ 1.110125] hub 2-0:1.0: USB hub found [ 1.110584] hub 2-0:1.0: 12 ports detected [ 1.202482] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133 [ 1.203098] ata1.01: NODEV after polling detection [ 1.203332] ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133 [ 1.203797] ata1.00: 488397168 sectors, multi 128: LBA48 [ 1.204603] ata2.00: configured for UDMA/100 [ 1.205668] ata1.00: configured for UDMA/100 [ 1.207573] scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5 [ 1.211253] scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5 [ 1.228629] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.229555] sd 0:0:0:0: [sda] Write Protect is off [ 1.230132] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.230132] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.231138] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray [ 1.231643] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.234459] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.235230] sda: sda1 sda2 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 > [ 1.236871] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.243332] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.244015] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.506811] Refined TSC clocksource calibration: 1728.996 MHz. [ 1.507389] Switching to clocksource tsc [ 1.637279] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 2.242998] udevd[285]: starting version 175 [ 2.481577] vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds [ 2.481685] input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input1 [ 2.481770] vboxguest: misc device minor 59, IRQ 9, I/O port d040, MMIO at 00000000f0400000 (size 0x400000) [ 2.481772] vboxguest: Successfully loaded version 5.0.20 (interface 0x00010004) [ 2.520761] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr [ 2.523997] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 2.527595] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 2.528585] ACPI: Power Button [PWRF] [ 2.529121] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input4 [ 2.529750] ACPI: Sleep Button [SLPF] [ 2.532014] ACPI: AC Adapter [AC] (on-line) [ 2.535040] ACPI: Battery Slot [BAT0] (battery present) [ 2.538403] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5 [ 2.555619] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.607993] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 2.744033] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6 [ 2.945487] intel8x0_measure_ac97_clock: measured 57944 usecs (15654 samples) [ 2.947122] intel8x0: measured clock 270157 rejected [ 3.305204] intel8x0_measure_ac97_clock: measured 55947 usecs (13921 samples) [ 3.305708] intel8x0: measured clock 248824 rejected [ 3.665133] intel8x0_measure_ac97_clock: measured 55907 usecs (15610 samples) [ 3.667153] intel8x0: measured clock 279213 rejected [ 3.669088] intel8x0: clocking to 48000 [ 4.246643] EXT4-fs (sda6): re-mounted. Opts: (null) [ 4.393878] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [ 4.425334] loop: module loaded [ 5.416516] RPC: Registered named UNIX socket transport module. [ 5.416944] RPC: Registered udp transport module. [ 5.417652] RPC: Registered tcp transport module. [ 5.418321] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 5.425359] FS-Cache: Loaded [ 5.433478] FS-Cache: Netfs 'nfs' registered for caching [ 5.440339] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 5.590707] fuse init (API version 7.17) [ 7.066461] pcnet32 0000:00:03.0: eth0: link up, 100Mbps, full-duplex [ 7.070541] pcnet32 0000:00:08.0: eth1: link up, 100Mbps, full-duplex [ 7.167183] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7 [ 7.636663] apm: BIOS not found. [ 8.003076] Bluetooth: Core ver 2.16 [ 8.003092] NET: Registered protocol family 31 [ 8.003094] Bluetooth: HCI device and connection manager initialized [ 8.003095] Bluetooth: HCI socket layer initialized [ 8.003097] Bluetooth: L2CAP socket layer initialized [ 8.003236] Bluetooth: SCO socket layer initialized [ 8.027568] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.027571] Bluetooth: BNEP filters: protocol multicast [ 8.028335] Bluetooth: RFCOMM TTY layer initialized [ 8.028345] Bluetooth: RFCOMM socket layer initialized [ 8.028352] Bluetooth: RFCOMM ver 1.11 [ 8.700155] lp: driver loaded but no devices found [ 8.749705] ppdev: user-space parallel port driver [ 13.370706] vboxsf: Successfully loaded version 5.0.20 (interface 0x00010004) [ 14.234469] VBoxService 5.0.20 r106931 (verbosity: 0) linux.x86 (Apr 28 2016 15:22:27) release log [ 14.234473] 00:00:00.000309 main Log opened 2017-06-23T15:50:57.846536000Z [ 14.234577] 00:00:00.000467 main OS Product: Linux [ 14.234627] 00:00:00.000527 main OS Release: 3.2.0-4-686-pae [ 14.234674] 00:00:00.000576 main OS Version: #1 SMP Debian 3.2.89-1 [ 14.234747] 00:00:00.000628 main Executable: /opt/VBoxGuestAdditions-5.0.20/sbin/VBoxService [ 14.234749] 00:00:00.000631 main Process ID: 3431 [ 14.234751] 00:00:00.000633 main Package type: LINUX_32BITS_GENERIC [ 14.238656] 00:00:00.004518 main 5.0.20 r106931 started. Verbose level = 0 [ 17.965860] eth0: no IPv6 routers present [ 18.117067] eth1: no IPv6 routers present [ 32.596155] hrtimer: interrupt took 2294406 ns [ 65.736131] eth1: no IPv6 routers present [ 113.468845] eth1: no IPv6 routers present [ 161.709138] eth1: no IPv6 routers present ** Model information not available ** Loaded modules: vboxsf(O) mperf processor cpufreq_powersave cpufreq_stats cpufreq_userspace cpufreq_conservative parport_pc ppdev lp parport bnep rfcomm bluetooth rfkill binfmt_misc uinput fuse nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc loop snd_intel8x0 snd_ac97_codec snd_pcm snd_page_alloc snd_seq snd_seq_device snd_timer video snd battery thermal_sys ac button power_supply psmouse pcspkr evdev serio_raw i2c_piix4 i2c_core crc32c_intel soundcore ac97_bus vboxguest(O) ext4 crc16 jbd2 mbcache sg sr_mod sd_mod cdrom crc_t10dif ata_generic ohci_hcd ata_piix ehci_hcd libata scsi_mod usbcore pcnet32 mii usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:01.1 IDE interface [0101]: Intel Corporation 631xESB/632xESB IDE Controller [8086:269e] (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at d000 [size=16] Kernel driver in use: ata_piix 00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter [80ee:beef] (prog-if 00 [VGA controller]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M] Expansion ROM at <unassigned> [disabled] 00:03.0 Ethernet controller [0200]: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] [1022:2000] (rev 40) Subsystem: Advanced Micro Devices [AMD] PCnet - Fast 79C971 [1022:2000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (1500ns min, 63750ns max) Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at d020 [size=32] Region 1: Memory at f0000000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: pcnet32 00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox Guest Service [80ee:cafe] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at d040 [size=32] Region 1: Memory at f0400000 (32-bit, non-prefetchable) [size=4M] Region 2: Memory at f0800000 (32-bit, prefetchable) [size=16K] Kernel driver in use: vboxguest 00:05.0 Multimedia audio controller [0401]: Intel Corporation 82801AA AC'97 Audio Controller [8086:2415] (rev 01) Subsystem: Intel Corporation Device [8086:0000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at d100 [size=256] Region 1: I/O ports at d200 [size=64] Kernel driver in use: snd_intel8x0 00:06.0 USB controller [0c03]: Apple Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 11 Region 0: Memory at f0804000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 08) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 9 00:08.0 Ethernet controller [0200]: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] [1022:2000] (rev 40) Subsystem: Advanced Micro Devices [AMD] PCnet - Fast 79C971 [1022:2000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (1500ns min, 63750ns max) Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at d240 [size=32] Region 1: Memory at f0805000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: pcnet32 00:0b.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (prog-if 20 [EHCI]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at f0806000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ehci_hcd ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 7.11 APT prefers oldoldstable-updates APT policy: (500, 'oldoldstable-updates'), (500, 'oldoldstable') Architecture: i386 (i686) Kernel: Linux 3.2.0-4-686-pae (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-686-pae depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.109.1 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.2.0-4-686-pae recommends: ii firmware-linux-free 3.2 ii libc6-i686 2.13-38+deb7u12 Versions of packages linux-image-3.2.0-4-686-pae suggests: pn debian-kernel-handbook <none> pn grub-pc | extlinux | lilo <none> pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-686-pae is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-686-pae/postinst/depmod-error-initrd-3.2.0-4-686-pae: false linux-image-3.2.0-4-686-pae/prerm/removing-running-kernel-3.2.0-4-686-pae: true linux-image-3.2.0-4-686-pae/postinst/ignoring-ramdisk: linux-image-3.2.0-4-686-pae/postinst/missing-firmware-3.2.0-4-686-pae:
