Package: src:linux
Version: 4.8.11-1
Severity: normal
Dear Debian folk,
pressing the power button on the Dell XPS13 no event is sent.
Neither `xev` nor `acpi_listen` shows something.
If I remember correctly, it worked on the shipped Ubuntu 16.04 from Dell.
Kind regards,
Paul Menzel
-- Package-specific info:
** Version:
Linux version 4.8.0-2-amd64 (debian-kernel@lists.debian.org) (gcc
version 5.4.1 20161019 (Debian 5.4.1-3) ) #1 SMP Debian 4.8.11-1
(2016-12-02)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.8.0-2-amd64
root=UUID=2809c0c6-7152-4e35-a6da-a26e7400e556 ro quiet
** Not tainted
** Kernel log:
[ 2.356558] Bluetooth: HCI UART protocol Intel registered
[ 2.356568] Bluetooth: HCI UART protocol BCM registered
[ 2.356568] Bluetooth: HCI UART protocol QCA registered
[ 2.362373] ACPI: Battery Slot [BAT0] (battery present)
[ 2.362520] wmi: Mapper loaded
[ 2.363711] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 2.364301] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 2.364519] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 2.364872] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.366919] input: ELAN Touchscreen as
/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0001/input/input8
[ 2.368091] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 2.368133] hid-multitouch 0003:04F3:2234.0001:
input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on
usb-0000:00:14.0-4/input0
[ 2.369771] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 2.381350] usbcore: registered new interface driver btusb
[ 2.382577] bluetooth hci0: firmware: failed to load
qca/rampatch_usb_00000302.bin (-2)
[ 2.382751] bluetooth hci0: Direct firmware load for
qca/rampatch_usb_00000302.bin failed with error -2
[ 2.382753] Bluetooth: hci0: failed to request rampatch file:
qca/rampatch_usb_00000302.bin (-2)
[ 2.383359] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 2.471578] dcdbas dcdbas: Dell Systems Management Base Driver
(version 5.6.0-3.2)
[ 2.480502] [drm] Memory usable by graphics device = 4096M
[ 2.480504] [drm] Replacing VGA console driver
[ 2.483581] ath10k_pci 0000:3a:00.0: pci irq msi oper_irq_mode 2
irq_mode 0 reset_mode 0
[ 2.484252] Console: switching to colour dummy device 80x25
[ 2.487901] intel_rapl: Found RAPL domain package
[ 2.487903] intel_rapl: Found RAPL domain core
[ 2.487903] intel_rapl: Found RAPL domain uncore
[ 2.487904] intel_rapl: Found RAPL domain dram
[ 2.490884] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.490885] [drm] Driver supports precise vblank timestamp query.
[ 2.492445] iTCO_vendor_support: vendor-support=0
[ 2.493325] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 2.493484] iTCO_wdt: Found a Intel PCH TCO device (Version=4,
TCOBASE=0x0400)
[ 2.493628] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.496855] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.497712] i915 0000:00:02.0: firmware: direct-loading firmware
i915/kbl_dmc_ver1_01.bin
[ 2.498292] [drm] Finished loading i915/kbl_dmc_ver1_01.bin (v1.1)
[ 2.504002] [drm] GuC firmware load skipped
[ 2.542973] ACPI: Video Device [GFX0] (multi-head: yes rom: no
post: no)
[ 2.543853] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[ 2.544275] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops
i915_audio_component_bind_ops [i915])
[ 2.544279] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on
minor 0
[ 2.553300] fbcon: inteldrmfb (fb0) is primary device
[ 2.608135] snd_hda_codec_realtek hdaudioC0D0: autoconfig for
ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 2.608136] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 2.608137] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1
(0x21/0x0/0x0/0x0/0x0)
[ 2.608137] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 2.608138] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 2.608139] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 2.608139] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 2.608140] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 2.622922] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 2.624693] input: HDA Intel PCH Headphone Mic as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 2.624748] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 2.624791] input: HDA Intel PCH HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 2.624866] input: HDA Intel PCH HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 2.720318] random: crng init done
[ 2.734006] input: DLL075B:01 06CB:76AF Touchpad as
/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL075B:01/0018:06CB:76AF.0002/input/input17
[ 2.734281] hid-multitouch 0018:06CB:76AF.0002: input,hidraw1: I2C
HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
[ 2.760371] ath10k_pci 0000:3a:00.0: firmware: failed to load
ath10k/pre-cal-pci-0000:3a:00.0.bin (-2)
[ 2.760373] ath10k_pci 0000:3a:00.0: Direct firmware load for
ath10k/pre-cal-pci-0000:3a:00.0.bin failed with error -2
[ 2.760383] ath10k_pci 0000:3a:00.0: firmware: failed to load
ath10k/cal-pci-0000:3a:00.0.bin (-2)
[ 2.760384] ath10k_pci 0000:3a:00.0: Direct firmware load for
ath10k/cal-pci-0000:3a:00.0.bin failed with error -2
[ 2.760598] ath10k_pci 0000:3a:00.0: firmware: failed to load
ath10k/QCA6174/hw3.0/firmware-5.bin (-2)
[ 2.760599] ath10k_pci 0000:3a:00.0: Direct firmware load for
ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2
[ 2.760601] ath10k_pci 0000:3a:00.0: could not fetch firmware file
'ath10k/QCA6174/hw3.0/firmware-5.bin': -2
[ 2.761723] ath10k_pci 0000:3a:00.0: firmware: direct-loading
firmware ath10k/QCA6174/hw3.0/firmware-4.bin
[ 2.761729] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000
chip_id 0x00340aff sub 1a56:1535
[ 2.761731] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0
tracing 0 dfs 0 testmode 0
[ 2.762548] ath10k_pci 0000:3a:00.0: firmware ver
WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 features
wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5
[ 2.825435] ath10k_pci 0000:3a:00.0: firmware: direct-loading
firmware ath10k/QCA6174/hw3.0/board-2.bin
[ 2.825691] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A
crc32 6fc88fe7
[ 3.075318] clocksource: Switched to clocksource tsc
[ 3.844491] [drm] RC6 on
[ 3.869792] Console: switching to colour frame buffer device 400x112
[ 3.893763] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.976956] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.976957] Bluetooth: BNEP filters: protocol multicast
[ 3.976960] Bluetooth: BNEP socket layer initialized
[ 4.561104] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.570779] Ebtables v2.0 registered
[ 4.950840] ath10k_pci 0000:3a:00.0: htt-ver 3.26 wmi-op 4 htt-op 3
cal otp max-sta 32 raw 0 hwcrypto 1
[ 5.030843] ath: EEPROM regdomain: 0x6c
[ 5.030844] ath: EEPROM indicates we should expect a direct regpair map
[ 5.030846] ath: Country alpha2 being used: 00
[ 5.030846] ath: Regpair used: 0x6c
[ 5.033923] ath10k_pci 0000:3a:00.0 wlp58s0: renamed from wlan0
[ 5.062307] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 7.346291] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 9.704087] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 9.786674] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 13.753115] fuse init (API version 7.25)
[ 14.507068] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 14.561708] wlp58s0: authenticate with 6c:f3:7f:10:ae:18
[ 14.607570] wlp58s0: send auth to 6c:f3:7f:10:ae:18 (try 1/3)
[ 14.608960] wlp58s0: authenticated
[ 14.615071] wlp58s0: associate with 6c:f3:7f:10:ae:18 (try 1/3)
[ 14.618996] wlp58s0: RX AssocResp from 6c:f3:7f:10:ae:18 (capab=0x411
status=0 aid=4)
[ 14.621758] wlp58s0: associated
[ 14.621788] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready
[ 300.772807] mce: [Hardware Error]: Machine check events logged
** Model information
sys_vendor: Dell Inc.
product_name: XPS 13 9360
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: 1.2.3
board_vendor: Dell Inc.
board_name: 0839Y6
board_version: A00
** Loaded modules:
ctr
ccm
fuse
arc4
ebtable_filter
ebtables
ip6table_filter
ip6_tables
iptable_filter
bnep
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_codec_generic
iTCO_wdt
snd_soc_skl
iTCO_vendor_support
snd_soc_skl_ipc
intel_rapl
snd_soc_sst_ipc
x86_pkg_temp_thermal
snd_soc_sst_dsp
coretemp
snd_hda_ext_core
ath10k_pci
snd_soc_sst_match
i2c_designware_platform
i2c_designware_core
ath10k_core
snd_soc_core
dcdbas
kvm_intel
snd_compress
ath
i915
snd_hda_intel
kvm
mac80211
snd_hda_codec
irqbypass
crct10dif_pclmul
rtsx_pci_ms
crc32_pclmul
memstick
snd_hda_core
snd_hwdep
cfg80211
snd_pcm
ghash_clmulni_intel
evdev
joydev
i2c_i801
serio_raw
snd_timer
pcspkr
snd
soundcore
i2c_smbus
hid_multitouch
drm_kms_helper
hci_uart
btqca
btusb
idma64
drm
btrtl
btbcm
virt_dma
btintel
mei_me
processor_thermal_device
i2c_algo_bit
intel_soc_dts_iosf
mei
shpchp
intel_pch_thermal
intel_lpss_pci
wmi
battery
bluetooth
soc_button_array
uvcvideo
rfkill
video
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
intel_lpss_acpi
videobuf2_core
intel_lpss
int3403_thermal
int3400_thermal
int340x_thermal_zone
acpi_thermal_rel
videodev
acpi_als
acpi_pad
kfifo_buf
media
ac
industrialio
tpm_tis
tpm_tis_core
button
tpm
ip_tables
x_tables
autofs4
usbhid
ext4
crc16
jbd2
fscrypto
ecb
mbcache
raid10
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
async_tx
xor
raid6_pq
libcrc32c
crc32c_generic
raid1
raid0
multipath
linear
md_mod
crc32c_intel
rtsx_pci_sdmmc
mmc_core
aesni_intel
xhci_pci
xhci_hcd
aes_x86_64
glue_helper
lrw
gf128mul
ablk_helper
cryptd
psmouse
usbcore
nvme
rtsx_pci
nvme_core
mfd_core
usb_common
thermal
i2c_hid
hid
fjes
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Device [8086:5904] (rev 02)
Subsystem: Dell Device [1028:075b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Device
[8086:5916] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:075b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 282
Region 0: Memory at db000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at 90000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:04.0 Signal processing controller [1180]: Intel Corporation Skylake
Processor Thermal Subsystem [8086:1903] (rev 02)
Subsystem: Dell Skylake Processor Thermal Subsystem [1028:075b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dc420000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB
3.0 xHCI Controller [8086:9d2f] (rev 21) (prog-if 30 [XHCI])
Subsystem: Dell Sunrise Point-LP USB 3.0 xHCI Controller [1028:075b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 276
Region 0: Memory at dc410000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise
Point-LP Thermal subsystem [8086:9d31] (rev 21)
Subsystem: Dell Sunrise Point-LP Thermal subsystem [1028:075b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at dc434000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:15.0 Signal processing controller [1180]: Intel Corporation Sunrise
Point-LP Serial IO I2C Controller #0 [8086:9d60] (rev 21)
Subsystem: Dell Sunrise Point-LP Serial IO I2C Controller [1028:075b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dc433000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:15.1 Signal processing controller [1180]: Intel Corporation Sunrise
Point-LP Serial IO I2C Controller #1 [8086:9d61] (rev 21)
Subsystem: Dell Sunrise Point-LP Serial IO I2C Controller [1028:075b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: Memory at dc432000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:16.0 Communication controller [0780]: Intel Corporation Sunrise
Point-LP CSME HECI #1 [8086:9d3a] (rev 21)
Subsystem: Dell Sunrise Point-LP CSME HECI [1028:075b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 280
Region 0: Memory at dc431000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1c.0 PCI bridge [0604]: Intel Corporation Device [8086:9d10] (rev f1)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=01, subordinate=39, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c4000000-da0fffff
Prefetchable memory behind bridge: 00000000a0000000-00000000c1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI
Express Root Port #5 [8086:9d14] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=3a, subordinate=3a, sec-latency=0
Memory behind bridge: dc000000-dc1fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI
Express Root Port #6 [8086:9d15] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Bus: primary=00, secondary=3b, subordinate=3b, sec-latency=0
Memory behind bridge: dc300000-dc3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI
Express Root Port #9 [8086:9d18] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=3c, subordinate=3c, sec-latency=0
Memory behind bridge: dc200000-dc2fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:9d58] (rev 21)
Subsystem: Dell Device [1028:075b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC
[8086:9d21] (rev 21)
Subsystem: Dell Sunrise Point-LP PMC [1028:075b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at dc42c000 (32-bit, non-prefetchable) [size=16K]
00:1f.3 Audio device [0403]: Intel Corporation Device [8086:9d71] (rev
21) (prog-if 80)
Subsystem: Dell Device [1028:075b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 283
Region 0: Memory at dc428000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at dc400000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_soc_skl
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus
[8086:9d23] (rev 21)
Subsystem: Dell Sunrise Point-LP SMBus [1028:075b]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dc430000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
3a:00.0 Network controller [0280]: Qualcomm Atheros QCA6174 802.11ac
Wireless Network Adapter [168c:003e] (rev 32)
Subsystem: Bigfoot Networks, Inc. QCA6174 802.11ac Wireless Network
Adapter [1a56:1535]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 281
Region 0: Memory at dc000000 (64-bit, non-prefetchable) [size=2M]
Capabilities: <access denied>
Kernel driver in use: ath10k_pci
Kernel modules: ath10k_pci
3b:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A
PCI Express Card Reader [10ec:525a] (rev 01)
Subsystem: Dell RTS525A PCI Express Card Reader [1028:075b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 274
Region 1: Memory at dc300000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
3c:00.0 Non-Volatile memory controller [0108]: Device [1c5c:1284]
(prog-if 02 [NVM Express])
Subsystem: Device [1c5c:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at dc200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 0bda:568b Realtek Semiconductor Corp.
Bus 001 Device 003: ID 04f3:2234 Elan Microelectronics Corp.
Bus 001 Device 002: ID 0cf3:e300 Atheros Communications, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 4.8.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.8.0-2-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.125
ii kmod 23-1
ii linux-base 4.5
Versions of packages linux-image-4.8.0-2-amd64 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2
Versions of packages linux-image-4.8.0-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta3-3
pn linux-doc-4.8 <none>
Versions of packages linux-image-4.8.0-2-amd64 is related to:
pn firmware-amd-graphics <none>
ii firmware-atheros 20160824-1
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20161130-2
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
