Package: src:linux
Version: 3.16.36-1+deb8u2
Followup-For: Bug #766829
I have the same issue on a DELL LATITUDE 3330.
The boot continues unless the errors happen after an hibernation/suspension,
and in the last case I get a KERNEL PANIC. I must reboot (and lose the saved
session) to boot normally.
-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version
4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.36-1+deb8u2 (2016-10-19)
** Command line:
BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/Sistema-Debian ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 13.776389] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with
disabled ep ffff8800d9a5d448
[ 13.776399] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with
disabled ep ffff8800d9a5d400
[ 13.776404] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with
disabled ep ffff8800d9a5d490
[ 13.776408] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with
disabled ep ffff8800d9a5d4d8
[ 13.776412] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with
disabled ep ffff8800d9a5d520
[ 13.776416] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with
disabled ep ffff8800d9a5d568
[ 13.776419] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with
disabled ep ffff8800d9a5d5b0
[ 13.776962] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3070, rev 0201
detected
[ 13.793096] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 13.793580] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 13.794273] usbcore: registered new interface driver rt2800usb
[ 13.869830] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 14.087377] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
usrquota,grpquota,user_xattr,journal_async_commit,auto_da_alloc,i_version
[ 14.091088] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts:
usrquota,grpquota,user_xattr
[ 14.289974] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts:
(null)
[ 14.322146] systemd-journald[209]: Received request to flush runtime journal
from PID 1
[ 14.345252] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.352884] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 14.371661] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.845552] RPC: Registered named UNIX socket transport module.
[ 14.845559] RPC: Registered udp transport module.
[ 14.845562] RPC: Registered tcp transport module.
[ 14.845564] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 14.852650] FS-Cache: Loaded
[ 14.866711] FS-Cache: Netfs 'nfs' registered for caching
[ 14.889879] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 15.588639] vboxdrv: Found 4 processor cores.
[ 15.588833] vboxdrv: fAsync=0 offMin=0x1aa offMax=0xc92
[ 15.588896] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 15.588898] vboxdrv: Successfully loaded version 4.3.36_Debian (interface
0x001a000b).
[ 15.671544] vboxpci: IOMMU not found (not registered)
[ 19.524010] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 19.627858] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 19.628171] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.719888] brcmsmac bcma0:0: firmware: direct-loading firmware
brcm/bcm43xx-0.fw
[ 19.739517] brcmsmac bcma0:0: firmware: direct-loading firmware
brcm/bcm43xx_hdr-0.fw
[ 19.914068] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false
(implement)
[ 19.914086] brcmsmac bcma0:0: brcms_ops_config: change power-save mode:
false (implement)
[ 19.914787] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.917629] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading
firmware file 'rt2870.bin'
[ 20.001134] rt2800usb 3-2:1.0: firmware: direct-loading firmware rt2870.bin
[ 20.001155] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware
detected - version: 0.29
[ 20.234783] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 21.229571] wlan0: authenticate with e0:3f:49:96:04:a0
[ 21.233420] wlan0: direct probe to e0:3f:49:96:04:a0 (try 1/3)
[ 21.435193] wlan0: direct probe to e0:3f:49:96:04:a0 (try 2/3)
[ 21.639116] wlan0: direct probe to e0:3f:49:96:04:a0 (try 3/3)
[ 21.842962] wlan0: authentication with e0:3f:49:96:04:a0 timed out
[ 28.646246] wlan0: authenticate with e0:3f:49:96:04:a0
[ 28.648446] wlan0: send auth to e0:3f:49:96:04:a0 (try 1/3)
[ 28.752763] wlan0: send auth to e0:3f:49:96:04:a0 (try 2/3)
[ 28.754735] wlan0: authenticated
[ 28.756742] wlan0: associate with e0:3f:49:96:04:a0 (try 1/3)
[ 28.762557] wlan0: RX AssocResp from e0:3f:49:96:04:a0 (capab=0x411 status=0
aid=2)
[ 28.763114] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed:
associated
[ 28.763121] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true
(implement)
[ 28.763134] wlan0: associated
[ 28.763152] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 28.763358] cfg80211: Calling CRDA for country: GB
[ 28.767057] cfg80211: Regulatory domain changed to country: GB
[ 28.767062] cfg80211: DFS Master region: ETSI
[ 28.767065] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 28.767069] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 28.767072] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 28.767076] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 28.767078] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700
mBm), (0 s)
[ 28.767081] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A,
4000 mBm), (N/A)
[ 29.073354] brcmsmac bcma0:0: wl0: brcms_c_d11hdrs_mac80211:
X\xffffff8bM\xffffff88\xffffffff\xffffffff txop exceeded phylen 159/256 dur
1778/1504
[ 29.078557] brcmsmac bcma0:0: wl0: brcms_c_d11hdrs_mac80211:
X\xffffff8bM\xffffff88\xffffffff\xffffffff txop exceeded phylen 137/256 dur
1602/1504
[ 45.033522] wlan1: authenticate with e0:3f:49:96:04:a0
[ 45.054860] wlan1: direct probe to e0:3f:49:96:04:a0 (try 1/3)
[ 45.255365] wlan1: send auth to e0:3f:49:96:04:a0 (try 2/3)
[ 45.256807] wlan1: authenticated
[ 45.259389] wlan1: associate with e0:3f:49:96:04:a0 (try 1/3)
[ 45.262857] wlan1: RX AssocResp from e0:3f:49:96:04:a0 (capab=0x411 status=0
aid=3)
[ 45.266250] wlan1: associated
[ 45.266263] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 46.062334] IPv6: wlan1: IPv6 duplicate address fe80::20d:a3ff:fe09:8887
detected!
[ 49.330826] [UFW BLOCK] IN=wlan1 OUT=
MAC=00:0d:a3:09:88:87:e0:3f:49:96:04:a4:08:00 SRC=192.168.1.1 DST=192.168.1.106
LEN=540 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=9999 DPT=9999 LEN=520
[ 50.333731] [UFW BLOCK] IN=wlan1 OUT=
MAC=00:0d:a3:09:88:87:e0:3f:49:96:04:a4:08:00 SRC=192.168.1.1 DST=192.168.1.106
LEN=540 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=9999 DPT=9999 LEN=520
[ 51.337474] [UFW BLOCK] IN=wlan1 OUT=
MAC=00:0d:a3:09:88:87:e0:3f:49:96:04:a4:08:00 SRC=192.168.1.1 DST=192.168.1.106
LEN=540 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=9999 DPT=9999 LEN=520
[ 52.392666] [UFW BLOCK] IN=wlan1 OUT=
MAC=00:0d:a3:09:88:87:e0:3f:49:96:04:a4:08:00 SRC=192.168.1.1 DST=192.168.1.106
LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=46143 DF PROTO=TCP SPT=50078 DPT=515
WINDOW=5840 RES=0x00 SYN URGP=0
[ 53.388790] [UFW BLOCK] IN=wlan1 OUT=
MAC=00:0d:a3:09:88:87:e0:3f:49:96:04:a4:08:00 SRC=192.168.1.1 DST=192.168.1.106
LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=61830 DF PROTO=TCP SPT=35018 DPT=9100
WINDOW=5840 RES=0x00 SYN URGP=0
[ 53.888771] [UFW BLOCK] IN=wlan1 OUT=
MAC=00:0d:a3:09:88:87:e0:3f:49:96:04:a4:08:00 SRC=192.168.1.1 DST=192.168.1.106
LEN=62 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=53603 DPT=5353 LEN=42
[ 55.387927] [UFW BLOCK] IN=wlan1 OUT=
MAC=00:0d:a3:09:88:87:e0:3f:49:96:04:a4:08:00 SRC=192.168.1.1 DST=192.168.1.106
LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=46144 DF PROTO=TCP SPT=50078 DPT=515
WINDOW=5840 RES=0x00 SYN URGP=0
[ 57.891352] nf_conntrack: automatic helper assignment is deprecated and it
will be removed soon. Use the iptables CT target to attach helpers instead.
[ 60.660520] Bluetooth: Core ver 2.19
[ 60.660570] NET: Registered protocol family 31
[ 60.660574] Bluetooth: HCI device and connection manager initialized
[ 60.660589] Bluetooth: HCI socket layer initialized
[ 60.660594] Bluetooth: L2CAP socket layer initialized
[ 60.660628] Bluetooth: SCO socket layer initialized
[ 60.731275] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 60.731282] Bluetooth: BNEP filters: protocol multicast
[ 60.731297] Bluetooth: BNEP socket layer initialized
[ 61.386013] [UFW BLOCK] IN=wlan1 OUT=
MAC=00:0d:a3:09:88:87:e0:3f:49:96:04:a4:08:00 SRC=192.168.1.1 DST=192.168.1.106
LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=46145 DF PROTO=TCP SPT=50078 DPT=515
WINDOW=5840 RES=0x00 SYN URGP=0
[ 73.382147] [UFW BLOCK] IN=wlan1 OUT=
MAC=00:0d:a3:09:88:87:e0:3f:49:96:04:a4:08:00 SRC=192.168.1.1 DST=192.168.1.106
LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=46146 DF PROTO=TCP SPT=50078 DPT=515
WINDOW=5840 RES=0x00 SYN URGP=0
[ 133.730270] wlan0: deauthenticating from e0:3f:49:96:04:a0 by local choice
(Reason: 3=DEAUTH_LEAVING)
[ 133.732677] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed:
disassociated
[ 133.732692] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false
(implement)
** Model information
sys_vendor: Dell Inc.
product_name: Latitude 3330
product_version: 01
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A06
board_vendor: Dell Inc.
board_name: 0X5G0J
board_version: A00
** Loaded modules:
bnep
bluetooth
6lowpan_iphc
ctr
ccm
binfmt_misc
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
ip6t_REJECT
xt_hl
ip6t_rt
nf_conntrack_ipv6
nf_defrag_ipv6
ipt_REJECT
xt_LOG
xt_limit
xt_tcpudp
xt_addrtype
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
ip6table_filter
ip6_tables
nf_conntrack_netbios_ns
nf_conntrack_broadcast
nf_nat_ftp
nf_nat
nf_conntrack_ftp
nf_conntrack
iptable_filter
ip_tables
x_tables
rt2800usb
rt2x00usb
rt2800lib
rt2x00lib
crc_ccitt
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
v4l2_common
videodev
media
x86_pkg_temp_thermal
arc4
dell_wmi
intel_powerclamp
sparse_keymap
brcmsmac
cordic
brcmutil
mac80211
intel_rapl
cfg80211
coretemp
kvm_intel
kvm
crc32_pclmul
snd_hda_codec_hdmi
aesni_intel
iTCO_wdt
iTCO_vendor_support
snd_hda_codec_idt
snd_hda_codec_generic
aes_x86_64
lrw
dell_laptop
rfkill
i915
dcdbas
bcma
gf128mul
glue_helper
ablk_helper
evdev
cryptd
cuse
joydev
snd_hda_intel
serio_raw
pcspkr
shpchp
wmi
dell_smo8800
i2c_i801
lpc_ich
mfd_core
snd_hda_controller
fuse
ac
drm_kms_helper
drm
i2c_algo_bit
i2c_core
tpm_tis
snd_hda_codec
tpm
snd_hwdep
button
snd_pcm
snd_timer
snd
soundcore
video
battery
mei_me
mei
processor
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
dm_mod
hid_generic
usbhid
hid
sg
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_pclmul
crct10dif_common
crc32c_intel
psmouse
xhci_hcd
ahci
libahci
ehci_pci
ehci_hcd
libata
sdhci_pci
scsi_mod
sdhci
mmc_core
usbcore
e1000e
usb_common
ptp
thermal
pps_core
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM
Controller [8086:0154] (rev 09)
Subsystem: Dell Device [1028:05dc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: ivb_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core
processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:05dc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f6c00000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Dell Device [1028:05dc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f7c20000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series
Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Dell Device [1028:05dc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f7c3c000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network
Connection [8086:1502] (rev 04)
Subsystem: Dell Device [1028:05dc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f7c00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f7c39000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:05dc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7c38000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset
Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Dell Device [1028:05dc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f7c30000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: f7b00000-f7bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=06, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7000000-f79fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f09fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 6 [8086:1e1a] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Memory behind bridge: f7a00000-f7afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:05dc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f7c37000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM77 Express Chipset LPC
Controller [8086:1e57] (rev 04)
Subsystem: Dell Device [1028:05dc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 Mobile SATA
Controller [RAID mode] [8086:282a] (rev 04)
Subsystem: Dell Device [1028:05dc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 44
Region 0: I/O ports at f0d0 [size=8]
Region 1: I/O ports at f0c0 [size=4]
Region 2: I/O ports at f0b0 [size=8]
Region 3: I/O ports at f0a0 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7c36000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family
SMBus Controller [8086:1e22] (rev 04)
Subsystem: Dell Device [1028:05dc]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7c35000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn
Wireless Network Adapter [14e4:4727] (rev 01)
Subsystem: Dell Device [1028:0015]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f7b00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: bcma-pci-bridge
07:00.0 SD Host controller [0805]: O2 Micro, Inc. OZ600FJ0/OZ900FJ0/OZ600FJS
SD/MMC Card Reader Controller [1217:8221] (rev 05) (prog-if 01)
Subsystem: Dell Device [1028:05dc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f7a02000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
** USB devices:
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0c45:64ce Microdia
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070
Wireless Adapter
Bus 003 Device 002: ID 04d9:fc07 Holtek Semiconductor, Inc.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 8.6
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=it_IT.utf8, LC_CTYPE=it_IT.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.120+deb8u2
ii kmod 18-3
ii linux-base 3.5
Versions of packages linux-image-3.16.0-4-amd64 recommends:
ii firmware-linux-free 3.3
pn irqbalance <none>
Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-22+deb8u1
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-amd64 is related to:
ii firmware-atheros 0.43
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 0.43
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-ralink 0.43
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false
linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true
linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:
