If I plug in a USB WiFi stick with a different brand of chip (Atheros) it (the Atheros) works.
[ 1288.500070] usb 3-5: new high-speed USB device number 8 using ehci-pci [ 1288.648969] usb 3-5: New USB device found, idVendor=0cf3, idProduct=9271 [ 1288.648984] usb 3-5: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 1288.648995] usb 3-5: Product: USB2.0 WLAN [ 1288.649003] usb 3-5: Manufacturer: ATHEROS [ 1288.649011] usb 3-5: SerialNumber: 12345 [ 1288.649994] usb 3-5: ath9k_htc: Firmware htc_9271.fw requested [ 1288.650254] usb 3-5: firmware: direct-loading firmware htc_9271.fw [ 1288.930988] usb 3-5: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272 [ 1289.168861] ath9k_htc 3-5:1.0: ath9k_htc: HTC initialized with 33 credits [ 1289.437866] ath9k_htc 3-5:1.0: ath9k_htc: FW Version: 1.3 [ 1289.437879] ath: EEPROM regdomain: 0x809c [ 1289.437886] ath: EEPROM indicates we should expect a country code [ 1289.437892] ath: doing EEPROM country->regdmn map search [ 1289.437898] ath: country maps to regdmn code: 0x52 [ 1289.437910] ath: Country alpha2 being used: CN [ 1289.437913] ath: Regpair used: 0x52 [ 1289.467835] ieee80211 phy0: Atheros AR9271 Rev:1 [ 1289.467927] cfg80211: Calling CRDA for country: CN [ 1289.477069] cfg80211: Regulatory domain changed to country: CN [ 1289.477079] cfg80211: DFS Master region: FCC [ 1289.477083] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 1289.477090] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1289.477096] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A) [ 1289.477102] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s) [ 1289.477107] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) [ 1289.477112] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A) [ 1289.477118] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A) [ 1289.477123] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A) [ 1289.816610] systemd-udevd[1542]: renamed network interface wlan0 to wlan1 [ 1290.143509] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready 2016-11-24 18:21 GMT+01:00 Roberto Ríos Gallardo <fridel...@gmail.com>: > It also happens on Toshiba NB500 on a fresh install performed today with > the stable netinstall iso. > Previously it was working, on the same version of debian, last upgraded > about a month ago. > > I am using the latest version on stable, obviously, it was just installed > from the repos after apt-get update. > > root@libroverde:/home/usuario# lsusb > Bus 005 Device 002: ID 04f2:b1d6 Chicony Electronics Co., Ltd CNF9055 > Toshiba Webcam > Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > root@libroverde:/home/usuario# > > root@libroverde:/home/usuario# rfkill list > root@libroverde:/home/usuario# > > > Output of dmesg: > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Initializing cgroup subsys cpuacct > [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian. > org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.36-1+deb8u2 > (2016-10-19) > [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 > root=/dev/mapper/libroverde--vg-root ro quiet > [ 0.000000] e820: BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] > usable > [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000dffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f5cffff] > usable > [ 0.000000] BIOS-e820: [mem 0x000000007f5d0000-0x000000007f5dffff] > ACPI data > [ 0.000000] BIOS-e820: [mem 0x000000007f5e0000-0x000000007f5e2fff] > ACPI NVS > [ 0.000000] BIOS-e820: [mem 0x000000007f5e3000-0x000000007fffffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] > reserved > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] SMBIOS 2.5 present. > [ 0.000000] DMI: TOSHIBA TOSHIBA NB500/PBU00, BIOS V1.9A 07/28/2011 > [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved > [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable > [ 0.000000] AGP: No AGP bridge found > [ 0.000000] e820: last_pfn = 0x7f5d0 max_arch_pfn = 0x400000000 > [ 0.000000] MTRR default type: uncachable > [ 0.000000] MTRR fixed ranges enabled: > [ 0.000000] 00000-9FFFF write-back > [ 0.000000] A0000-BFFFF uncachable > [ 0.000000] C0000-CFFFF write-protect > [ 0.000000] D0000-DFFFF uncachable > [ 0.000000] E0000-FFFFF write-protect > [ 0.000000] MTRR variable ranges enabled: > [ 0.000000] 0 base 000000000 mask 080000000 write-back > [ 0.000000] 1 base 07F600000 mask 0FFE00000 uncachable > [ 0.000000] 2 base 07F800000 mask 0FF800000 uncachable > [ 0.000000] 3 disabled > [ 0.000000] 4 disabled > [ 0.000000] 5 disabled > [ 0.000000] 6 disabled > [ 0.000000] 7 disabled > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new > 0x7010600070106 > [ 0.000000] found SMP MP-table at [mem 0x000f7d50-0x000f7d5f] mapped at > [ffff8800000f7d50] > [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size > 24576 > [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] > [ 0.000000] [mem 0x00000000-0x000fffff] page 4k > [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE > [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE > [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE > [ 0.000000] init_memory_mapping: [mem 0x7f200000-0x7f3fffff] > [ 0.000000] [mem 0x7f200000-0x7f3fffff] page 2M > [ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE > [ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7f1fffff] > [ 0.000000] [mem 0x7c000000-0x7f1fffff] page 2M > [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff] > [ 0.000000] [mem 0x00100000-0x001fffff] page 4k > [ 0.000000] [mem 0x00200000-0x7bffffff] page 2M > [ 0.000000] init_memory_mapping: [mem 0x7f400000-0x7f5cffff] > [ 0.000000] [mem 0x7f400000-0x7f5cffff] page 4k > [ 0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE > [ 0.000000] RAMDISK: [mem 0x35dd8000-0x36ee3fff] > [ 0.000000] ACPI: Early table checksum verification disabled > [ 0.000000] ACPI: RSDP 0x00000000000F7CB0 000024 (v02 TOSCPL) > [ 0.000000] ACPI: XSDT 0x000000007F5D4D23 000084 (v01 TOSCPL TOSCPL00 > 06040000 LTP 00000000) > [ 0.000000] ACPI: FACP 0x000000007F5DFC60 0000F4 (v03 TOSCPL TOSCPL00 > 06040000 PTL 00000002) > [ 0.000000] ACPI: DSDT 0x000000007F5D679D 00944F (v01 TOSCPL TOSCPL00 > 06040000 MSFT 03000000) > [ 0.000000] ACPI: FACS 0x000000007F5E2FC0 000040 > [ 0.000000] ACPI: FACS 0x000000007F5E2FC0 000040 > [ 0.000000] ACPI: TCPA 0x000000007F5DFD54 000032 (v01 Phoeni x > 06040000 TL 00000000) > [ 0.000000] ACPI: HPET 0x000000007F5DFD86 000038 (v01 TOSCPL TOSCPL00 > 06040000 LOHR 0000005A) > [ 0.000000] ACPI: MCFG 0x000000007F5DFDBE 00003C (v01 INTEL CRESTLNE > 06040000 LOHR 0000005A) > [ 0.000000] ACPI: APIC 0x000000007F5DFDFA 000068 (v01 TOSCPL TOSCPL00 > 06040000 LTP 00000000) > [ 0.000000] ACPI: BOOT 0x000000007F5DFE62 000028 (v01 TOSCPL TOSCPL00 > 06040000 LTP 00000001) > [ 0.000000] ACPI: SLIC 0x000000007F5DFE8A 000176 (v01 TOSCPL TOSCPL00 > 06040000 RHOL 00000000) > [ 0.000000] ACPI: SSDT 0x000000007F5D594B 00025F (v01 PmRef Cpu0Tst > 00003000 INTL 20050624) > [ 0.000000] ACPI: SSDT 0x000000007F5D58A5 0000A6 (v01 PmRef Cpu3Tst > 00003000 INTL 20050624) > [ 0.000000] ACPI: SSDT 0x000000007F5D57FF 0000A6 (v01 PmRef Cpu2Tst > 00003000 INTL 20050624) > [ 0.000000] ACPI: SSDT 0x000000007F5D5759 0000A6 (v01 PmRef Cpu1Tst > 00003000 INTL 20050624) > [ 0.000000] ACPI: SSDT 0x000000007F5D4DA7 0009B2 (v02 PmRef CpuPm > 00003000 INTL 20050624) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at [mem 0x0000000000000000- > 0x000000007f5cffff] > [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7f5cffff] > [ 0.000000] NODE_DATA [mem 0x7f5cb000-0x7f5cffff] > [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> > [ffff88007cc00000-ffff88007e7fffff] on node 0 > [ 0.000000] Zone ranges: > [ 0.000000] DMA [mem 0x00001000-0x00ffffff] > [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] > [ 0.000000] Normal empty > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] > [ 0.000000] node 0: [mem 0x00100000-0x7f5cffff] > [ 0.000000] On node 0 totalpages: 521580 > [ 0.000000] DMA zone: 56 pages used for memmap > [ 0.000000] DMA zone: 21 pages reserved > [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 7077 pages used for memmap > [ 0.000000] DMA32 zone: 517584 pages, LIFO batch:31 > [ 0.000000] Reserving Intel graphics stolen memory at > 0x7f800000-0x7fffffff > [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI > 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 > [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs > [ 0.000000] nr_irqs_gsi: 40 > [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] > [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] > [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff] > [ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000dffff] > [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000e3fff] > [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff] > [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices > [ 0.000000] Booting paravirtualized kernel on bare hardware > [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 > nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007f200000 s80960 > r8192 d21440 u1048576 > [ 0.000000] pcpu-alloc: s80960 r8192 d21440 u1048576 alloc=1*2097152 > [ 0.000000] pcpu-alloc: [0] 0 1 > [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. > Total pages: 514426 > [ 0.000000] Policy zone: DMA32 > [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 > root=/dev/mapper/libroverde--vg-root ro quiet > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] AGP: Checking aperture... > [ 0.000000] AGP: No AGP bridge found > [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area > [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - > bailing! > [ 0.000000] Memory: 2028380K/2086320K available (5237K kernel code, > 947K rwdata, 1836K rodata, 1204K init, 840K bss, 57940K reserved) > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. > [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2. > [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 > [ 0.000000] NR_IRQS:33024 nr_irqs:512 16 > [ 0.000000] Console: colour VGA+ 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] hpet clockevent registered > [ 0.000000] tsc: Fast TSC calibration using PIT > [ 0.000000] tsc: Detected 1662.651 MHz processor > [ 0.004018] Calibrating delay loop (skipped), value calculated using > timer frequency.. 3325.30 BogoMIPS (lpj=6650604) > [ 0.004026] pid_max: default: 32768 minimum: 301 > [ 0.004059] ACPI: Core revision 20140424 > [ 0.023538] ACPI: All ACPI Tables successfully acquired > [ 0.023656] Security Framework initialized > [ 0.023672] AppArmor: AppArmor disabled by boot time parameter > [ 0.023676] Yama: disabled by default; enable with sysctl kernel.yama.* > [ 0.024087] Dentry cache hash table entries: 262144 (order: 9, 2097152 > bytes) > [ 0.025950] Inode-cache hash table entries: 131072 (order: 8, 1048576 > bytes) > [ 0.026890] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.026909] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 > bytes) > [ 0.027588] Initializing cgroup subsys memory > [ 0.027610] Initializing cgroup subsys devices > [ 0.027637] Initializing cgroup subsys freezer > [ 0.027647] Initializing cgroup subsys net_cls > [ 0.027664] Initializing cgroup subsys blkio > [ 0.027678] Initializing cgroup subsys perf_event > [ 0.027686] Initializing cgroup subsys net_prio > [ 0.027752] CPU: Physical Processor ID: 0 > [ 0.027756] CPU: Processor Core ID: 0 > [ 0.027761] mce: CPU supports 5 MCE banks > [ 0.027776] CPU0: Thermal monitoring handled by SMI > [ 0.027785] process: using mwait in idle threads > [ 0.027796] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0 > Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0 > tlb_flushall_shift: 6 > [ 0.028030] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - > ffffffff81a20000) > [ 0.032021] ftrace: allocating 21697 entries in 85 pages > [ 0.048625] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.091135] smpboot: CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz (fam: > 06, model: 1c, stepping: 0a) > [ 0.092000] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, > Intel PMU driver. > [ 0.092000] ... version: 3 > [ 0.092000] ... bit width: 40 > [ 0.092000] ... generic registers: 2 > [ 0.092000] ... value mask: 000000ffffffffff > [ 0.092000] ... max period: 000000007fffffff > [ 0.092000] ... fixed-purpose events: 3 > [ 0.092000] ... event mask: 0000000700000003 > [ 0.092973] x86: Booting SMP configuration: > [ 0.092982] .... node #0, CPUs: #1 > [ 0.008000] CPU1: Thermal monitoring handled by SMI > [ 0.106117] x86: Booted up 1 node, 2 CPUs > [ 0.106132] smpboot: Total of 2 processors activated (6650.60 BogoMIPS) > [ 0.106280] NMI watchdog: enabled on all CPUs, permanently consumes one > hw-PMU counter. > [ 0.106887] devtmpfs: initialized > [ 0.116020] PM: Registering ACPI NVS region [mem 0x7f5e0000-0x7f5e2fff] > (12288 bytes) > [ 0.117719] pinctrl core: initialized pinctrl subsystem > [ 0.117993] NET: Registered protocol family 16 > [ 0.118418] cpuidle: using governor ladder > [ 0.118428] cpuidle: using governor menu > [ 0.118555] ACPI: bus type PCI registered > [ 0.118562] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > [ 0.118813] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem > 0xe0000000-0xefffffff] (base 0xe0000000) > [ 0.118821] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in > E820 > [ 0.120211] PCI: Using configuration type 1 for base access > [ 0.132283] ACPI: Added _OSI(Module Device) > [ 0.132283] ACPI: Added _OSI(Processor Device) > [ 0.132283] ACPI: Added _OSI(3.0 _SCP Extensions) > [ 0.132283] ACPI: Added _OSI(Processor Aggregator Device) > [ 0.146574] ACPI: Dynamic OEM Table Load: > [ 0.146592] ACPI: SSDT 0xFFFF88007C685000 000203 (v02 PmRef Cpu0Ist > 00003000 INTL 20050624) > [ 0.147565] ACPI: Dynamic OEM Table Load: > [ 0.147581] ACPI: SSDT 0xFFFF88007C683000 0005E5 (v02 PmRef Cpu0Cst > 00003001 INTL 20050624) > [ 0.149186] ACPI: Dynamic OEM Table Load: > [ 0.149199] ACPI: SSDT 0xFFFF88007C692E00 0000D4 (v02 PmRef Cpu1Ist > 00003000 INTL 20050624) > [ 0.150018] ACPI: Dynamic OEM Table Load: > [ 0.150029] ACPI: SSDT 0xFFFF88007C547940 000085 (v02 PmRef Cpu1Cst > 00003000 INTL 20050624) > [ 0.152348] ACPI: Interpreter enabled > [ 0.152366] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State > [\_S1_] (20140424/hwxface-580) > [ 0.152377] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State > [\_S2_] (20140424/hwxface-580) > [ 0.152414] ACPI: (supports S0 S3 S4 S5) > [ 0.152419] ACPI: Using IOAPIC for interrupt routing > [ 0.152504] PCI: Using host bridge windows from ACPI; if necessary, use > "pci=nocrs" and report a bug > [ 0.213028] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) > [ 0.213047] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM > ClockPM Segments MSI] > [ 0.213225] ACPI Error: [CAPB] Namespace lookup failure, > AE_ALREADY_EXISTS (20140424/dsfield-211) > [ 0.213239] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] > (Node ffff88007e83e9a0), AE_ALREADY_EXISTS (20140424/psparse-536) > [ 0.213264] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling > ASPM > [ 0.217228] PCI host bridge to bus 0000:00 > [ 0.217238] pci_bus 0000:00: root bus resource [bus 00-3f] > [ 0.217245] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] > [ 0.217251] pci_bus 0000:00: root bus resource [mem > 0x000a0000-0x000bffff] > [ 0.217257] pci_bus 0000:00: root bus resource [mem > 0x000d0000-0x000d3fff] > [ 0.217263] pci_bus 0000:00: root bus resource [mem > 0x000d4000-0x000d7fff] > [ 0.217269] pci_bus 0000:00: root bus resource [mem > 0x000d8000-0x000dbfff] > [ 0.217275] pci_bus 0000:00: root bus resource [mem > 0x000e0000-0x000e3fff] > [ 0.217281] pci_bus 0000:00: root bus resource [mem > 0x80000000-0xf7ffffff] > [ 0.217287] pci_bus 0000:00: root bus resource [io 0x0d00-0xfdff] > [ 0.217307] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000 > [ 0.217545] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000 > [ 0.217564] pci 0000:00:02.0: reg 0x10: [mem 0xf0100000-0xf017ffff] > [ 0.217574] pci 0000:00:02.0: reg 0x14: [io 0x18d0-0x18d7] > [ 0.217585] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref] > [ 0.217594] pci 0000:00:02.0: reg 0x1c: [mem 0xf0000000-0xf00fffff] > [ 0.217821] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000 > [ 0.217838] pci 0000:00:02.1: reg 0x10: [mem 0xf0180000-0xf01fffff] > [ 0.218126] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 > [ 0.218154] pci 0000:00:1b.0: reg 0x10: [mem 0xf0200000-0xf0203fff > 64bit] > [ 0.218260] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.218479] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 > [ 0.218582] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > [ 0.218699] pci 0000:00:1c.0: System wakeup disabled by ACPI > [ 0.218836] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400 > [ 0.218944] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold > [ 0.219180] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 > [ 0.219237] pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f] > [ 0.219415] pci 0000:00:1d.0: System wakeup disabled by ACPI > [ 0.219552] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 > [ 0.219608] pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f] > [ 0.219738] pci 0000:00:1d.1: System wakeup disabled by ACPI > [ 0.219870] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 > [ 0.219925] pci 0000:00:1d.2: reg 0x20: [io 0x1860-0x187f] > [ 0.220107] pci 0000:00:1d.2: System wakeup disabled by ACPI > [ 0.220242] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 > [ 0.220299] pci 0000:00:1d.3: reg 0x20: [io 0x1880-0x189f] > [ 0.220430] pci 0000:00:1d.3: System wakeup disabled by ACPI > [ 0.220579] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 > [ 0.220611] pci 0000:00:1d.7: reg 0x10: [mem 0xf0404000-0xf04043ff] > [ 0.220729] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > [ 0.220859] pci 0000:00:1d.7: System wakeup disabled by ACPI > [ 0.220998] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 > [ 0.221163] pci 0000:00:1e.0: System wakeup disabled by ACPI > [ 0.221302] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100 > [ 0.221405] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS > cleared > [ 0.221647] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601 > [ 0.221674] pci 0000:00:1f.2: reg 0x10: [io 0x18e8-0x18ef] > [ 0.221688] pci 0000:00:1f.2: reg 0x14: [io 0x18dc-0x18df] > [ 0.221702] pci 0000:00:1f.2: reg 0x18: [io 0x18e0-0x18e7] > [ 0.221716] pci 0000:00:1f.2: reg 0x1c: [io 0x18d8-0x18db] > [ 0.221729] pci 0000:00:1f.2: reg 0x20: [io 0x18c0-0x18cf] > [ 0.221743] pci 0000:00:1f.2: reg 0x24: [mem 0xf0404400-0xf04047ff] > [ 0.221796] pci 0000:00:1f.2: PME# supported from D3hot > [ 0.222033] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 > [ 0.222103] pci 0000:00:1f.3: reg 0x20: [io 0x18a0-0x18bf] > [ 0.222475] pci 0000:00:1c.0: PCI bridge to [bus 05] > [ 0.222485] pci 0000:00:1c.0: bridge window [io 0x0000-0x0fff] > [ 0.222705] pci 0000:09:00.0: [10ec:8136] type 00 class 0x020000 > [ 0.222774] pci 0000:09:00.0: reg 0x10: [io 0x2000-0x20ff] > [ 0.222849] pci 0000:09:00.0: reg 0x18: [mem 0xf040c000-0xf040cfff > 64bit pref] > [ 0.222895] pci 0000:09:00.0: reg 0x20: [mem 0xf0408000-0xf040bfff > 64bit pref] > [ 0.223109] pci 0000:09:00.0: supports D1 D2 > [ 0.223115] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.224070] pci 0000:09:00.0: System wakeup disabled by ACPI > [ 0.224282] pci 0000:00:1c.2: PCI bridge to [bus 09] > [ 0.224292] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] > [ 0.224306] pci 0000:00:1c.2: bridge window [mem > 0xf0400000-0xf04fffff 64bit pref] > [ 0.224460] pci 0000:00:1e.0: PCI bridge to [bus 11] (subtractive > decode) > [ 0.224482] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] > (subtractive decode) > [ 0.224489] pci 0000:00:1e.0: bridge window [mem > 0x000a0000-0x000bffff] (subtractive decode) > [ 0.224495] pci 0000:00:1e.0: bridge window [mem > 0x000d0000-0x000d3fff] (subtractive decode) > [ 0.224502] pci 0000:00:1e.0: bridge window [mem > 0x000d4000-0x000d7fff] (subtractive decode) > [ 0.224508] pci 0000:00:1e.0: bridge window [mem > 0x000d8000-0x000dbfff] (subtractive decode) > [ 0.224514] pci 0000:00:1e.0: bridge window [mem > 0x000e0000-0x000e3fff] (subtractive decode) > [ 0.224520] pci 0000:00:1e.0: bridge window [mem > 0x80000000-0xf7ffffff] (subtractive decode) > [ 0.224526] pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff] > (subtractive decode) > [ 0.248367] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 10 11 12 > 14 15) > [ 0.248546] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 > 14 15) > [ 0.248722] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 > 14 15) > [ 0.248897] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 > 14 15) > [ 0.249081] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 > 15) *0, disabled. > [ 0.249268] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 > 15) *0, disabled. > [ 0.249453] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 > 14 15) > [ 0.249637] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 > 14 15) > [ 0.250137] ACPI: Enabled 2 GPEs in block 00 to 1F > [ 0.250262] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = > 0x62 > [ 0.250515] vgaarb: setting as boot device: PCI:0000:00:02.0 > [ 0.250515] vgaarb: device added: PCI:0000:00:02.0,decodes=io+ > mem,owns=io+mem,locks=none > [ 0.250515] vgaarb: loaded > [ 0.250515] vgaarb: bridge control possible 0000:00:02.0 > [ 0.250515] PCI: Using ACPI for IRQ routing > [ 0.257393] PCI: pci_cache_line_size set to 64 bytes > [ 0.257438] pci 0000:00:1d.7: can't claim BAR 0 [mem > 0xf0404000-0xf04043ff]: address conflict with PCI Bus 0000:09 [mem > 0xf0400000-0xf04fffff 64bit pref] > [ 0.257458] pci 0000:00:1f.2: can't claim BAR 5 [mem > 0xf0404400-0xf04047ff]: address conflict with PCI Bus 0000:09 [mem > 0xf0400000-0xf04fffff 64bit pref] > [ 0.257492] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] > [ 0.257498] e820: reserve RAM buffer [mem 0x7f5d0000-0x7fffffff] > [ 0.257925] HPET: 3 timers in total, 0 timers will be used for per-cpu > timer > [ 0.257934] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > [ 0.257943] hpet0: 3 comparators, 64-bit 14.318180 MHz counter > [ 0.260056] Switched to clocksource hpet > [ 0.279619] pnp: PnP ACPI init > [ 0.279668] ACPI: bus type PNP registered > [ 0.280253] system 00:00: [io 0x0800-0x080f] has been reserved > [ 0.280264] system 00:00: [io 0x1000-0x107f] could not be reserved > [ 0.280271] system 00:00: [io 0x1180-0x11bf] has been reserved > [ 0.280278] system 00:00: [io 0x04d0-0x04d1] has been reserved > [ 0.280284] system 00:00: [io 0xfe00] has been reserved > [ 0.280291] system 00:00: [io 0x164e-0x174c] has been reserved > [ 0.280299] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved > [ 0.280306] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved > [ 0.280313] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved > [ 0.280320] system 00:00: [mem 0xfef00000-0xfeffffff] has been reserved > [ 0.280330] system 00:00: Plug and Play ACPI device, IDs PNP0c02 > (active) > [ 0.280518] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) > [ 0.304169] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) > [ 0.304282] pnp 00:03: Plug and Play ACPI device, IDs TOS0100 SYN0700 > SYN0002 PNP0f13 (active) > [ 0.304763] pnp: PnP ACPI: found 4 devices > [ 0.304768] ACPI: bus type PNP unregistered > [ 0.317051] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus > 05] add_size 1000 > [ 0.317065] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff > 64bit pref] to [bus 05] add_size 200000 > [ 0.317072] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] > to [bus 05] add_size 200000 > [ 0.317090] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] > to [bus 09] add_size 400000 > [ 0.317123] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] > get_res_add_size add_size 200000 > [ 0.317131] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit > pref] get_res_add_size add_size 200000 > [ 0.317138] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] > get_res_add_size add_size 400000 > [ 0.317145] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] > get_res_add_size add_size 1000 > [ 0.317160] pci 0000:00:1c.0: BAR 14: assigned [mem > 0x80000000-0x801fffff] > [ 0.317175] pci 0000:00:1c.0: BAR 15: assigned [mem > 0x80200000-0x803fffff 64bit pref] > [ 0.317185] pci 0000:00:1c.2: BAR 14: assigned [mem > 0x80400000-0x807fffff] > [ 0.317195] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] > [ 0.317205] pci 0000:00:1d.7: BAR 0: assigned [mem > 0x80800000-0x808003ff] > [ 0.317218] pci 0000:00:1f.2: BAR 5: assigned [mem > 0x80800400-0x808007ff] > [ 0.317229] pci 0000:00:1c.0: PCI bridge to [bus 05] > [ 0.317236] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] > [ 0.317246] pci 0000:00:1c.0: bridge window [mem > 0x80000000-0x801fffff] > [ 0.317254] pci 0000:00:1c.0: bridge window [mem > 0x80200000-0x803fffff 64bit pref] > [ 0.317264] pci 0000:00:1c.2: PCI bridge to [bus 09] > [ 0.317271] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] > [ 0.317280] pci 0000:00:1c.2: bridge window [mem > 0x80400000-0x807fffff] > [ 0.317288] pci 0000:00:1c.2: bridge window [mem > 0xf0400000-0xf04fffff 64bit pref] > [ 0.317300] pci 0000:00:1e.0: PCI bridge to [bus 11] > [ 0.317317] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] > [ 0.317323] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] > [ 0.317329] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff] > [ 0.317334] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] > [ 0.317340] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] > [ 0.317346] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff] > [ 0.317351] pci_bus 0000:00: resource 10 [mem 0x80000000-0xf7ffffff] > [ 0.317357] pci_bus 0000:00: resource 11 [io 0x0d00-0xfdff] > [ 0.317363] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] > [ 0.317369] pci_bus 0000:05: resource 1 [mem 0x80000000-0x801fffff] > [ 0.317375] pci_bus 0000:05: resource 2 [mem 0x80200000-0x803fffff > 64bit pref] > [ 0.317381] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff] > [ 0.317387] pci_bus 0000:09: resource 1 [mem 0x80400000-0x807fffff] > [ 0.317393] pci_bus 0000:09: resource 2 [mem 0xf0400000-0xf04fffff > 64bit pref] > [ 0.317399] pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7] > [ 0.317405] pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff] > [ 0.317411] pci_bus 0000:11: resource 6 [mem 0x000d0000-0x000d3fff] > [ 0.317416] pci_bus 0000:11: resource 7 [mem 0x000d4000-0x000d7fff] > [ 0.317422] pci_bus 0000:11: resource 8 [mem 0x000d8000-0x000dbfff] > [ 0.317428] pci_bus 0000:11: resource 9 [mem 0x000e0000-0x000e3fff] > [ 0.317433] pci_bus 0000:11: resource 10 [mem 0x80000000-0xf7ffffff] > [ 0.317439] pci_bus 0000:11: resource 11 [io 0x0d00-0xfdff] > [ 0.317574] NET: Registered protocol family 2 > [ 0.318244] TCP established hash table entries: 16384 (order: 5, 131072 > bytes) > [ 0.318386] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) > [ 0.318532] TCP: Hash tables configured (established 16384 bind 16384) > [ 0.318638] TCP: reno registered > [ 0.318665] UDP hash table entries: 1024 (order: 3, 32768 bytes) > [ 0.318702] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) > [ 0.318968] NET: Registered protocol family 1 > [ 0.319031] pci 0000:00:02.0: Video device with shadowed ROM > [ 0.320166] PCI: CLS 32 bytes, default 64 > [ 0.320327] Unpacking initramfs... > [ 1.123586] Freeing initrd memory: 17456K (ffff880035dd8000 - > ffff880036ee4000) > [ 1.123762] Simple Boot Flag at 0x35 set to 0x1 > [ 1.124215] microcode: CPU0 sig=0x106ca, pf=0x4, revision=0x107 > [ 1.124243] microcode: CPU1 sig=0x106ca, pf=0x4, revision=0x107 > [ 1.124418] microcode: Microcode Update Driver: v2.00 < > tig...@aivazian.fsnet.co.uk>, Peter Oruba > [ 1.125276] futex hash table entries: 512 (order: 3, 32768 bytes) > [ 1.125357] audit: initializing netlink subsys (disabled) > [ 1.125409] audit: type=2000 audit(1480006247.124:1): initialized > [ 1.126399] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 1.126473] zbud: loaded > [ 1.126955] VFS: Disk quotas dquot_6.5.2 > [ 1.127001] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 1.127169] msgmni has been set to 3995 > [ 1.128094] alg: No test for stdrng (krng) > [ 1.128188] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 252) > [ 1.128335] io scheduler noop registered > [ 1.128343] io scheduler deadline registered > [ 1.128452] io scheduler cfq registered (default) > [ 1.128665] pcieport 0000:00:1c.0: enabling device (0000 -> 0003) > [ 1.128851] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X > [ 1.129130] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X > [ 1.129362] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 1.129422] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > [ 1.129496] intel_idle: MWAIT substates: 0x20220 > [ 1.129515] intel_idle: v0.4 model 0x1C > [ 1.129520] intel_idle: lapic_timer_reliable_states 0x2 > [ 1.129538] tsc: Marking TSC unstable due to TSC halts in idle states > deeper than C2 > [ 1.129812] GHES: HEST is not enabled! > [ 1.130051] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 1.131215] Linux agpgart interface v0.103 > [ 1.131341] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset > [ 1.131394] agpgart-intel 0000:00:00.0: detected gtt size: 524288K > total, 262144K mappable > [ 1.131489] agpgart-intel 0000:00:00.0: detected 8192K stolen memory > [ 1.131769] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ > 0xd0000000 > [ 1.132135] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at > 0x60,0x64 irq 1,12 > [ 1.153937] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 1.153959] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 1.154428] mousedev: PS/2 mouse device common for all mice > [ 1.154568] rtc_cmos 00:01: RTC can wake from S4 > [ 1.154854] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 > [ 1.154900] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes > nvram, hpet irqs > [ 1.154947] ledtrig-cpu: registered to indicate activity on CPUs > [ 1.155463] AMD IOMMUv2 driver by Joerg Roedel <joerg.roe...@amd.com> > [ 1.155467] AMD IOMMUv2 functionality not available on this system > [ 1.155723] TCP: cubic registered > [ 1.155859] NET: Registered protocol family 10 > [ 1.156568] mip6: Mobile IPv6 > [ 1.156583] NET: Registered protocol family 17 > [ 1.156602] mpls_gso: MPLS GSO support > [ 1.157515] registered taskstats version 1 > [ 1.158386] rtc_cmos 00:01: setting system clock to 2016-11-24 16:50:47 > UTC (1480006247) > [ 1.158583] PM: Hibernation image not present or could not be loaded. > [ 1.161644] Freeing unused kernel memory: 1204K (ffffffff818ee000 - > ffffffff81a1b000) > [ 1.161652] Write protecting the kernel read-only data: 8192k > [ 1.162842] Freeing unused kernel memory: 896K (ffff880001520000 - > ffff880001600000) > [ 1.164522] Freeing unused kernel memory: 212K (ffff8800017cb000 - > ffff880001800000) > [ 1.183835] input: AT Translated Set 2 keyboard as > /devices/platform/i8042/serio0/input/input0 > [ 1.415894] systemd-udevd[64]: starting version 215 > [ 1.417560] random: systemd-udevd urandom read with 6 bits of entropy > available > [ 1.490223] ACPI: bus type USB registered > [ 1.490386] usbcore: registered new interface driver usbfs > [ 1.490439] usbcore: registered new interface driver hub > [ 1.491017] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 1.491054] r8169 0000:09:00.0: can't disable ASPM; OS doesn't have > ASPM control > [ 1.491413] r8169 0000:09:00.0: irq 42 for MSI/MSI-X > [ 1.494655] r8169 0000:09:00.0 eth0: RTL8105e at 0xffffc90000372000, > b8:70:f4:d2:89:51, XID 00a00000 IRQ 42 > [ 1.496176] usbcore: registered new device driver usb > [ 1.497785] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 1.498897] uhci_hcd: USB Universal Host Controller Interface driver > [ 1.498964] ehci-pci: EHCI PCI platform driver > [ 1.499170] uhci_hcd 0000:00:1d.0: UHCI Host Controller > [ 1.499194] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus > number 1 > [ 1.499217] uhci_hcd 0000:00:1d.0: detected 2 ports > [ 1.499282] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 > [ 1.504629] usb usb1: New USB device found, idVendor=1d6b, > idProduct=0001 > [ 1.504641] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.504649] usb usb1: Product: UHCI Host Controller > [ 1.504655] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd > [ 1.504662] usb usb1: SerialNumber: 0000:00:1d.0 > [ 1.506465] SCSI subsystem initialized > [ 1.507047] hub 1-0:1.0: USB hub found > [ 1.507089] hub 1-0:1.0: 2 ports detected > [ 1.507825] uhci_hcd 0000:00:1d.1: UHCI Host Controller > [ 1.507858] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus > number 2 > [ 1.507879] uhci_hcd 0000:00:1d.1: detected 2 ports > [ 1.507956] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 > [ 1.508268] usb usb2: New USB device found, idVendor=1d6b, > idProduct=0001 > [ 1.508279] usb usb2: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.508287] usb usb2: Product: UHCI Host Controller > [ 1.508294] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd > [ 1.508301] usb usb2: SerialNumber: 0000:00:1d.1 > [ 1.512964] hub 2-0:1.0: USB hub found > [ 1.513003] hub 2-0:1.0: 2 ports detected > [ 1.513846] uhci_hcd 0000:00:1d.2: UHCI Host Controller > [ 1.513881] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus > number 3 > [ 1.513903] uhci_hcd 0000:00:1d.2: detected 2 ports > [ 1.513988] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 > [ 1.514237] usb usb3: New USB device found, idVendor=1d6b, > idProduct=0001 > [ 1.514248] usb usb3: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.514255] usb usb3: Product: UHCI Host Controller > [ 1.514262] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd > [ 1.514269] usb usb3: SerialNumber: 0000:00:1d.2 > [ 1.514858] hub 3-0:1.0: USB hub found > [ 1.514904] hub 3-0:1.0: 2 ports detected > [ 1.515806] uhci_hcd 0000:00:1d.3: UHCI Host Controller > [ 1.515840] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus > number 4 > [ 1.515861] uhci_hcd 0000:00:1d.3: detected 2 ports > [ 1.515939] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880 > [ 1.516258] usb usb4: New USB device found, idVendor=1d6b, > idProduct=0001 > [ 1.516269] usb usb4: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.516277] usb usb4: Product: UHCI Host Controller > [ 1.516285] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd > [ 1.516292] usb usb4: SerialNumber: 0000:00:1d.3 > [ 1.516902] hub 4-0:1.0: USB hub found > [ 1.516953] hub 4-0:1.0: 2 ports detected > [ 1.519059] ehci-pci 0000:00:1d.7: EHCI Host Controller > [ 1.519087] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus > number 5 > [ 1.519124] ehci-pci 0000:00:1d.7: debug port 1 > [ 1.519423] libata version 3.00 loaded. > [ 1.523081] ehci-pci 0000:00:1d.7: cache line size of 32 is not > supported > [ 1.523109] ehci-pci 0000:00:1d.7: irq 23, io mem 0x80800000 > [ 1.532074] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > [ 1.532344] usb usb5: New USB device found, idVendor=1d6b, > idProduct=0002 > [ 1.532357] usb usb5: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.532365] usb usb5: Product: EHCI Host Controller > [ 1.532372] usb usb5: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd > [ 1.532380] usb usb5: SerialNumber: 0000:00:1d.7 > [ 1.533005] hub 5-0:1.0: USB hub found > [ 1.533057] hub 5-0:1.0: 8 ports detected > [ 1.556318] hub 1-0:1.0: USB hub found > [ 1.556376] hub 1-0:1.0: 2 ports detected > [ 1.580306] hub 2-0:1.0: USB hub found > [ 1.580362] hub 2-0:1.0: 2 ports detected > [ 1.604258] hub 3-0:1.0: USB hub found > [ 1.604304] hub 3-0:1.0: 2 ports detected > [ 1.628248] hub 4-0:1.0: USB hub found > [ 1.628291] hub 4-0:1.0: 2 ports detected > [ 1.629208] ahci 0000:00:1f.2: version 3.0 > [ 1.629499] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X > [ 1.629638] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps > 0xf impl SATA mode > [ 1.629651] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum > part > [ 1.633585] scsi0 : ahci > [ 1.637152] scsi1 : ahci > [ 1.637554] scsi2 : ahci > [ 1.637967] scsi3 : ahci > [ 1.638221] ata1: SATA max UDMA/133 abar m1024@0x80800400 port > 0x80800500 irq 43 > [ 1.638233] ata2: SATA max UDMA/133 abar m1024@0x80800400 port > 0x80800580 irq 43 > [ 1.638242] ata3: SATA max UDMA/133 abar m1024@0x80800400 port > 0x80800600 irq 43 > [ 1.638250] ata4: SATA max UDMA/133 abar m1024@0x80800400 port > 0x80800680 irq 43 > [ 1.844047] usb 5-8: new high-speed USB device number 2 using ehci-pci > [ 1.956061] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 1.956094] ata4: SATA link down (SStatus 0 SControl 300) > [ 1.956125] ata3: SATA link down (SStatus 0 SControl 300) > [ 1.956176] ata2: SATA link down (SStatus 0 SControl 300) > [ 2.003291] ata1.00: ATA-8: TOSHIBA MK2575GSX, GT001M, max UDMA/100 > [ 2.003302] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth > 31/32), AA > [ 2.004162] ata1.00: configured for UDMA/100 > [ 2.004472] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2575GS > 1M PQ: 0 ANSI: 5 > [ 2.004916] usb 5-8: New USB device found, idVendor=04f2, idProduct=b1d6 > [ 2.004927] usb 5-8: New USB device strings: Mfr=2, Product=1, > SerialNumber=0 > [ 2.004935] usb 5-8: Product: CNF9055 > [ 2.004942] usb 5-8: Manufacturer: Sonix Technology Co., Ltd. > [ 2.031432] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 > GB/232 GiB) > [ 2.031715] sd 0:0:0:0: [sda] Write Protect is off > [ 2.031727] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 2.031851] sd 0:0:0:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 2.080246] sda: sda1 sda2 < sda5 > > [ 2.081585] sd 0:0:0:0: [sda] Attached SCSI disk > [ 2.083054] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 2.373289] device-mapper: uevent: version 1.0.3 > [ 2.373591] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) > initialised: dm-de...@redhat.com > [ 2.615321] psmouse serio1: synaptics: queried max coordinates: x > [..5612], y [..4618] > [ 2.744673] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: > 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 0, fw id: 528321 > [ 2.825687] input: SynPS/2 Synaptics TouchPad as > /devices/platform/i8042/serio1/input/input2 > [ 9.079245] random: nonblocking pool is initialized > [ 12.666692] NET: Registered protocol family 38 > [ 13.648658] PM: Starting manual resume from disk > [ 13.648672] PM: Hibernation image partition 254:2 present > [ 13.648676] PM: Looking for hibernation image. > [ 13.673686] PM: Image not found (code -22) > [ 13.673694] PM: Hibernation image not present or could not be loaded. > [ 13.935163] EXT4-fs (dm-1): mounted filesystem with ordered data mode. > Opts: (null) > [ 15.002595] systemd[1]: systemd 215 running in system mode. (+PAM > +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP > -APPARMOR) > [ 15.003056] systemd[1]: Detected architecture 'x86-64'. > [ 15.227744] systemd[1]: Inserted module 'autofs4' > [ 15.265939] systemd[1]: Set hostname to <libroverde>. > [ 16.501598] systemd[1]: Starting Forward Password Requests to Wall > Directory Watch. > [ 16.501811] systemd[1]: Started Forward Password Requests to Wall > Directory Watch. > [ 16.501857] systemd[1]: Starting Remote File Systems (Pre). > [ 16.501949] systemd[1]: Reached target Remote File Systems (Pre). > [ 16.502017] systemd[1]: Expecting device dev-disk-by\x2duuid-16de6215\ > x2d056a\x2d4ad5\x2d9b76\x2d3c7a6b3b8bf9.device... > [ 16.502056] systemd[1]: Expecting device dev-mapper-sda5_crypt.device.. > . > [ 16.502130] systemd[1]: Starting Arbitrary Executable File Formats File > System Automount Point. > [ 16.502378] systemd[1]: Set up automount Arbitrary Executable File > Formats File System Automount Point. > [ 16.502442] systemd[1]: Starting Dispatch Password Requests to Console > Directory Watch. > [ 16.502552] systemd[1]: Started Dispatch Password Requests to Console > Directory Watch. > [ 16.502591] systemd[1]: Expecting device dev-mapper-libroverde\x2d\ > x2dvg\x2dswap_1.device... > [ 16.502640] systemd[1]: Expecting device dev-disk-by\x2duuid-6fbc9fd0\ > x2d32ac\x2d4410\x2dbf12\x2de573634d41b1.device... > [ 16.502681] systemd[1]: Starting Root Slice. > [ 16.502758] systemd[1]: Created slice Root Slice. > [ 16.502796] systemd[1]: Starting User and Session Slice. > [ 16.502920] systemd[1]: Created slice User and Session Slice. > [ 16.502960] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. > [ 16.503077] systemd[1]: Listening on /dev/initctl Compatibility Named > Pipe. > [ 16.503114] systemd[1]: Starting Delayed Shutdown Socket. > [ 16.503199] systemd[1]: Listening on Delayed Shutdown Socket. > [ 16.503237] systemd[1]: Starting Journal Socket (/dev/log). > [ 16.503338] systemd[1]: Listening on Journal Socket (/dev/log). > [ 16.503378] systemd[1]: Starting LVM2 metadata daemon socket. > [ 16.503459] systemd[1]: Listening on LVM2 metadata daemon socket. > [ 16.503494] systemd[1]: Starting Device-mapper event daemon FIFOs. > [ 16.503584] systemd[1]: Listening on Device-mapper event daemon FIFOs. > [ 16.503631] systemd[1]: Starting udev Control Socket. > [ 16.503704] systemd[1]: Listening on udev Control Socket. > [ 16.503748] systemd[1]: Starting udev Kernel Socket. > [ 16.503820] systemd[1]: Listening on udev Kernel Socket. > [ 16.503880] systemd[1]: Starting Journal Socket. > [ 16.503997] systemd[1]: Listening on Journal Socket. > [ 16.504169] systemd[1]: Starting System Slice. > [ 16.504328] systemd[1]: Created slice System Slice. > [ 16.504390] systemd[1]: Started File System Check on Root Device. > [ 16.504422] systemd[1]: Starting system-systemd\x2dfsck.slice. > [ 16.504602] systemd[1]: Created slice system-systemd\x2dfsck.slice. > [ 16.504647] systemd[1]: Starting system-getty.slice. > [ 16.504785] systemd[1]: Created slice system-getty.slice. > [ 16.504864] systemd[1]: Starting Increase datagram queue length... > [ 16.506660] systemd[1]: Starting Create list of required static device > nodes for the current kernel... > [ 16.508801] systemd[1]: Mounting Huge Pages File System... > [ 16.510769] systemd[1]: Mounting POSIX Message Queue File System... > [ 16.562008] systemd[1]: Started Set Up Additional Binary Formats. > [ 16.562085] systemd[1]: Starting udev Coldplug all Devices... > [ 16.623887] systemd[1]: Starting Load Kernel Modules... > [ 16.625594] systemd[1]: Starting system-systemd\x2dcryptsetup.slice. > [ 16.625943] systemd[1]: Created slice system-systemd\x2dcryptsetup. > slice. > [ 16.626275] systemd[1]: Mounting Debug File System... > [ 16.628110] systemd[1]: Starting Slices. > [ 16.628193] systemd[1]: Reached target Slices. > [ 16.797418] systemd[1]: Started Create list of required static device > nodes for the current kernel. > [ 16.798273] systemd[1]: Starting Create Static Device Nodes in /dev... > [ 16.889001] fuse init (API version 7.23) > [ 17.022903] systemd[1]: Started udev Coldplug all Devices. > [ 17.023368] systemd[1]: Starting udev Wait for Complete Device > Initialization... > [ 17.056316] systemd[1]: Started Increase datagram queue length. > [ 17.056639] systemd[1]: Starting Syslog Socket. > [ 17.056768] systemd[1]: Listening on Syslog Socket. > [ 17.056823] systemd[1]: Starting Journal Service... > [ 17.058604] systemd[1]: Started Journal Service. > [ 17.805430] systemd-udevd[226]: starting version 215 > [ 19.524148] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro > [ 20.245703] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS: > 00/PNP0A08:00/device:0c/PNP0C0D:00/input/input3 > [ 20.245788] ACPI: Lid Switch [LID0] > [ 20.246045] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS: > 00/PNP0A08:00/PNP0C0C:00/input/input4 > [ 20.246060] ACPI: Power Button [PWRB] > [ 20.246287] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN: > 00/input/input5 > [ 20.246300] ACPI: Power Button [PWRF] > [ 20.542866] ACPI: AC Adapter [ACAD] (on-line) > [ 20.615607] ACPI Warning: SystemIO range > 0x0000000000001028-0x000000000000102F > conflicts with OpRegion 0x0000000000001000-0x000000000000102F > (\_SB_.PCI0.LPC0.PMIO) (20140424/utaddress-254) > [ 20.615629] ACPI: If an ACPI driver is available for this device, you > should use it instead of the native driver > [ 20.615639] ACPI Warning: SystemIO range > 0x00000000000011B0-0x00000000000011BF > conflicts with OpRegion 0x0000000000001180-0x00000000000011BB > (\_SB_.PCI0.LPC0.GPIO) (20140424/utaddress-254) > [ 20.615655] ACPI: If an ACPI driver is available for this device, you > should use it instead of the native driver > [ 20.615661] ACPI Warning: SystemIO range > 0x0000000000001180-0x00000000000011AF > conflicts with OpRegion 0x0000000000001180-0x00000000000011BB > (\_SB_.PCI0.LPC0.GPIO) (20140424/utaddress-254) > [ 20.615676] ACPI: If an ACPI driver is available for this device, you > should use it instead of the native driver > [ 20.615681] lpc_ich: Resource conflict(s) found affecting gpio_ich > [ 20.626509] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt > [ 20.750269] wmi: Mapper loaded > [ 20.759457] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > [ 20.760540] [Firmware Bug]: battery: (dis)charge rate invalid. > [ 20.760670] ACPI: Battery Slot [BAT1] (battery present) > [ 20.823662] [drm] Initialized drm 1.1.0 20060810 > [ 20.834791] input: PC Speaker as /devices/platform/pcspkr/input/input6 > [ 21.212976] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X > [ 21.358783] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.20 > [ 21.359079] input: Toshiba input device as /devices/virtual/input/input7 > [ 21.370684] toshiba_acpi: Illumination device not available > [ 21.377448] toshiba_acpi: Keyboard backlight status not supported > [ 21.380891] toshiba_acpi: Accelerometer not supported > [ 21.428236] iTCO_vendor_support: vendor-support=0 > [ 21.431213] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 > [ 21.431318] iTCO_wdt: Found a NM10 TCO device (Version=2, > TCOBASE=0x1060) > [ 21.431730] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > [ 21.739852] sound hdaudioC0D0: autoconfig: line_outs=1 > (0x14/0x0/0x0/0x0/0x0) type:speaker > [ 21.739863] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) > [ 21.739870] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) > [ 21.739875] sound hdaudioC0D0: mono: mono_out=0x0 > [ 21.739879] sound hdaudioC0D0: inputs: > [ 21.739886] sound hdaudioC0D0: Mic=0x18 > [ 21.739891] sound hdaudioC0D0: Internal Mic=0x12 > [ 21.749912] input: HDA Intel Mic as /devices/pci0000:00/0000:00: > 1b.0/sound/card0/input8 > [ 21.750318] input: HDA Intel Headphone as /devices/pci0000:00/0000:00: > 1b.0/sound/card0/input9 > [ 21.838160] [drm] Memory usable by graphics device = 512M > [ 21.838175] [drm] Replacing VGA console driver > [ 21.838965] Console: switching to colour dummy device 80x25 > [ 21.864154] i915 0000:00:02.0: irq 45 for MSI/MSI-X > [ 21.864186] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). > [ 21.864190] [drm] Driver supports precise vblank timestamp query. > [ 21.864337] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes= > io+mem,decodes=io+mem:owns=io+mem > [ 21.950176] [drm] initialized overlay support > [ 21.973526] fbcon: inteldrmfb (fb0) is primary device > [ 22.716260] Console: switching to colour frame buffer device 128x37 > [ 22.726700] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device > [ 22.726710] i915 0000:00:02.0: registered panic notifier > [ 22.741022] ACPI: Video Device [IGD0] (multi-head: yes rom: no post: > no) > [ 22.743344] acpi device:00: registered as cooling_device2 > [ 22.743641] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS: > 00/PNP0A08:00/LNXVIDEO:00/input/input10 > [ 22.743930] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on > minor 0 > [ 23.163393] media: Linux media interface: v0.10 > [ 23.254589] Linux video capture interface: v2.00 > [ 23.380846] Adding 4173820k swap on /dev/mapper/libroverde--vg-swap_1. > Priority:-1 extents:1 across:4173820k FS > [ 23.569541] uvcvideo: Found UVC 1.00 device CNF9055 (04f2:b1d6) > [ 23.579751] input: CNF9055 as /devices/pci0000:00/0000:00: > 1d.7/usb5/5-8/5-8:1.0/input/input11 > [ 23.580133] usbcore: registered new interface driver uvcvideo > [ 23.580142] USB Video Class driver (1.1.1) > [ 25.939439] EXT4-fs (sda1): mounting ext2 file system using the ext4 > subsystem > [ 25.943724] EXT4-fs (sda1): mounted filesystem without journal. Opts: > (null) > [ 26.279178] systemd-journald[216]: Received request to flush runtime > journal from PID 1 > [ 27.724692] RPC: Registered named UNIX socket transport module. > [ 27.724702] RPC: Registered udp transport module. > [ 27.724706] RPC: Registered tcp transport module. > [ 27.724709] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 27.789820] FS-Cache: Loaded > [ 27.969072] FS-Cache: Netfs 'nfs' registered for caching > [ 28.145877] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). > [ 33.321637] cfg80211: Calling CRDA to update world regulatory domain > [ 33.841922] cfg80211: World regulatory domain updated: > [ 33.841933] cfg80211: DFS Master region: unset > [ 33.841937] cfg80211: (start_freq - end_freq @ bandwidth), > (max_antenna_gain, max_eirp), (dfs_cac_time) > [ 33.841943] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, > 2000 mBm), (N/A) > [ 33.841949] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, > 2000 mBm), (N/A) > [ 33.841954] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, > 2000 mBm), (N/A) > [ 33.841960] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 > KHz AUTO), (N/A, 2000 mBm), (N/A) > [ 33.841966] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 > KHz AUTO), (N/A, 2000 mBm), (0 s) > [ 33.841972] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, > 2000 mBm), (0 s) > [ 33.841977] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, > 2000 mBm), (N/A) > [ 33.841982] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), > (N/A, 0 mBm), (N/A) > [ 35.044113] r8169 0000:09:00.0: firmware: direct-loading firmware > rtl_nic/rtl8105e-1.fw > [ 35.230978] r8169 0000:09:00.0 eth0: link down > [ 35.231000] r8169 0000:09:00.0 eth0: link down > [ 35.231068] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 36.926834] r8169 0000:09:00.0 eth0: link up > [ 36.926864] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > > > -- > Delay not, Caesar. Read it instantly. > -- Shakespeare, "Julius Caesar" 3,1 > > Here is a letter, read it at your leisure. > -- Shakespeare, "Merchant of Venice" 5,1 > > [Quoted in "VMS Internals and Data Structures", V4.4, when > referring to I/O system services.] > -- Delay not, Caesar. Read it instantly. -- Shakespeare, "Julius Caesar" 3,1 Here is a letter, read it at your leisure. -- Shakespeare, "Merchant of Venice" 5,1 [Quoted in "VMS Internals and Data Structures", V4.4, when referring to I/O system services.]
