--- Begin Message ---
Package: src:linux
Version: 4.4.6-1~bpo8+1
Severity: important
Tags: newcomer
Dear Maintainer,
since upgrading to the backports kernel 4.4 my
Manufacturer: Hewlett-Packard
Product Name: HP ProBook 470 G2
Version: A3009DD10303
fails to suspend when I put out the battery. Only the monitor turns off but the
laptop keeps on running. When the battery is in, it works as expected.
When I try to wake it up, it stays unresponsive and the only way to turn it on
again is to restart it using the starter switch.
-- Package-specific info:
** Version:
Linux version 4.4.0-0.bpo.1-amd64 (debian-kernel@lists.debian.org) (gcc version
4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.4.6-1~bpo8+1 (2016-03-20)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.4.0-0.bpo.1-amd64
root=UUID=b93cb965-8717-4cb2-b3f1-79962a83de1d ro quiet
** Tainted: W (512)
* Taint on warning.
** Kernel log:
[ 19.892528] Bluetooth: SCO socket layer initialized
[ 19.913650] input: ST LIS3LV02DL Accelerometer as
/devices/platform/lis3lv02d/input/input15
[ 19.914647] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 19.916820] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
[ 19.916893] [Firmware Bug]: ACPI(DGFX) defines _DOD but not _DOS
[ 19.917123] ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no)
[ 19.917200] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:40/LNXVIDEO:01/input/input17
[ 19.917249] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 19.917361] [drm] initializing kernel modesetting (TOPAZ 0x1002:0x6901
0x103C:0x224A 0x00).
[ 19.917373] [drm] register mmio base: 0xD0400000
[ 19.917374] [drm] register mmio size: 262144
[ 19.917378] [drm] doorbell mmio base: 0xB0000000
[ 19.917378] [drm] doorbell mmio size: 2097152
[ 19.917388] vga_switcheroo: enabled
[ 19.917475] ATPX version 1, functions 0x00000003
[ 19.922032] ATOM BIOS: HP
[ 19.922045] [drm] GPU not posted. posting now...
[ 19.925704] [drm] Changing default dispclk from 0Mhz to 600Mhz
[ 19.988449] amdgpu 0000:0a:00.0: firmware: failed to load
amdgpu/topaz_mc.bin (-2)
[ 19.988460] amdgpu 0000:0a:00.0: Direct firmware load for
amdgpu/topaz_mc.bin failed with error -2
[ 19.988464] cik_mc: Failed to load firmware "amdgpu/topaz_mc.bin"
[ 19.988499] [drm:gmc_v7_0_sw_init [amdgpu]] *ERROR* Failed to load mc
firmware!
[ 19.988507] amdgpu 0000:0a:00.0: Fatal error during GPU init
[ 19.988512] [drm] amdgpu: finishing device.
[ 19.988514] [TTM] Memory type 2 has not been initialized
[ 19.988560] vga_switcheroo: disabled
[ 19.988807] amdgpu: probe of 0000:0a:00.0 failed with error -2
[ 20.154333] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops
i915_audio_component_bind_ops [i915])
[ 20.154334] fbcon: inteldrmfb (fb0) is primary device
[ 20.163015] iTCO_vendor_support: vendor-support=0
[ 20.192212] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 20.192256] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2,
TCOBASE=0x1860)
[ 20.192379] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 20.225873] usbcore: registered new interface driver btusb
[ 20.227452] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b
lmp_ver=06 lmp_subver=8723
[ 20.227453] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 20.275653] bluetooth hci0: firmware: direct-loading firmware
rtl_bt/rtl8723b_fw.bin
[ 20.276458] Bluetooth: hci0: rom_version status=0 version=1
[ 20.324523] input: HP WMI hotkeys as /devices/virtual/input/input18
[ 20.342644] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3227:
line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 20.342646] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 20.342647] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1
(0x21/0x0/0x0/0x0/0x0)
[ 20.342648] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 20.342649] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 20.342651] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 20.342652] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 20.347651] input: HDA Intel HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input20
[ 20.347704] input: HDA Intel HDMI HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input21
[ 20.360013] media: Linux media interface: v0.10
[ 20.553404] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[ 20.553741] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input22
[ 20.553816] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input23
[ 20.690349] Linux video capture interface: v2.00
[ 20.805481] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin
[ 20.864753] rtl8723be 0000:09:00.0: firmware: direct-loading firmware
rtlwifi/rtl8723befw.bin
[ 20.899894] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 20.900125] rtlwifi: rtlwifi: wireless switch is on
[ 21.146622] uvcvideo: Found UVC 1.00 device HP HD Webcam (04f2:b3c8)
[ 21.149329] input: HP HD Webcam as
/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input24
[ 21.149404] usbcore: registered new interface driver uvcvideo
[ 21.149405] USB Video Class driver (1.1.1)
[ 21.293532] AVX2 version of gcm_enc/dec engaged.
[ 21.293532] AES CTR mode by8 optimization enabled
[ 21.517711] Console: switching to colour frame buffer device 200x56
[ 21.780884] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 21.843556] systemd-journald[212]: Received request to flush runtime journal
from PID 1
[ 21.937318] cfg80211: World regulatory domain updated:
[ 21.937323] cfg80211: DFS Master region: unset
[ 21.937324] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 21.937327] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 21.937329] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 21.937331] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm), (N/A)
[ 21.937333] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 21.937335] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 21.937337] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[ 21.937339] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 21.937341] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 23.199058] Adding 3868668k swap on /dev/sda5. Priority:-1 extents:1
across:3868668k FS
[ 23.768987] intel_rapl: Found RAPL domain package
[ 23.768995] intel_rapl: Found RAPL domain core
[ 23.768999] intel_rapl: Found RAPL domain uncore
[ 23.769002] intel_rapl: Found RAPL domain dram
[ 24.592099] RPC: Registered named UNIX socket transport module.
[ 24.592102] RPC: Registered udp transport module.
[ 24.592103] RPC: Registered tcp transport module.
[ 24.592103] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 24.635981] FS-Cache: Loaded
[ 24.710341] FS-Cache: Netfs 'nfs' registered for caching
[ 24.777259] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 31.692919] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 31.692923] Bluetooth: BNEP filters: protocol multicast
[ 31.692929] Bluetooth: BNEP socket layer initialized
[ 34.272973] r8169 0000:08:00.0: firmware: direct-loading firmware
rtl_nic/rtl8168g-3.fw
[ 34.283499] r8169 0000:08:00.0 eth0: link down
[ 36.611492] wlan0: authenticate with 64:66:b3:8b:b4:44
[ 36.622262] wlan0: send auth to 64:66:b3:8b:b4:44 (try 1/3)
[ 36.625895] wlan0: authenticated
[ 36.629342] wlan0: associate with 64:66:b3:8b:b4:44 (try 1/3)
[ 36.634056] wlan0: RX AssocResp from 64:66:b3:8b:b4:44 (capab=0x31 status=0
aid=4)
[ 36.634573] wlan0: associated
** Model information
sys_vendor: Hewlett-Packard
product_name: HP ProBook 470 G2
product_version: A3009DD10303
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: M74 Ver. 01.03
board_vendor: Hewlett-Packard
board_name: 2249
board_version: KBC Version 67.22
** Loaded modules:
ctr
ccm
binfmt_misc
bnep
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
grace
fscache
sunrpc
intel_rapl
iosf_mbi
x86_pkg_temp_thermal
intel_powerclamp
coretemp
kvm_intel
kvm
irqbypass
crct10dif_pclmul
crc32_pclmul
sha256_ssse3
sha256_generic
hmac
drbg
ansi_cprng
aesni_intel
aes_x86_64
uvcvideo
videobuf2_vmalloc
videobuf2_memops
lrw
videobuf2_v4l2
arc4
videobuf2_core
rtl8723be
gf128mul
glue_helper
v4l2_common
videodev
ablk_helper
cryptd
media
snd_hda_codec_hdmi
snd_hda_codec_realtek
hp_wmi
sparse_keymap
btcoexist
btusb
iTCO_wdt
btrtl
iTCO_vendor_support
btbcm
rtl8723_common
rtl_pci
snd_hda_codec_generic
rtlwifi
btintel
snd_hda_intel
mac80211
snd_hda_codec
bluetooth
snd_hda_core
amdkfd
i915
amdgpu
snd_hwdep
snd_pcm_oss
ttm
snd_mixer_oss
cfg80211
rfkill
pcspkr
joydev
snd_pcm
rtsx_pci_ms
memstick
snd_timer
evdev
drm_kms_helper
drm
snd
serio_raw
battery
video
wmi
8250_fintek
hp_accel
lis3lv02d
input_polldev
hp_wireless
ac
intel_smartconnect
tpm_infineon
button
shpchp
mei_me
lpc_ich
i2c_algo_bit
soundcore
tpm_tis
mei
tpm
processor
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
hid_generic
usbhid
hid
sg
sr_mod
cdrom
sd_mod
rtsx_pci_sdmmc
mmc_core
ahci
libahci
libata
crc32c_intel
psmouse
r8169
mii
scsi_mod
ehci_pci
ehci_hcd
xhci_pci
xhci_hcd
rtsx_pci
mfd_core
usbcore
usb_common
thermal
fjes
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller
[8086:0a04] (rev 0b)
Subsystem: Hewlett-Packard Company Device [103c:2249]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: hsw_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT
Integrated Graphics Controller [8086:0a16] (rev 0b) (prog-if 00 [VGA
controller])
Subsystem: Hewlett-Packard Company Device [103c:2249]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 50
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 8000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller
[8086:0a0c] (rev 0b)
Subsystem: Hewlett-Packard Company Device [103c:2249]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 52
Region 0: Memory at d0910000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC
[8086:9c31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company Device [103c:2249]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at d0900000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 8 Series HECI #0
[8086:9c3a] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:2249]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 49
Region 0: Memory at d0919000 (64-bit, non-prefetchable) [size=32]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1b.0 Audio device [0403]: Intel Corporation 8 Series HD Audio Controller
[8086:9c20] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:2249]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 51
Region 0: Memory at d0914000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 1
[8086:9c10] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=06, sec-latency=0
Memory behind bridge: d0800000-d08fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 2
[8086:9c12] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00006000-00007fff
Memory behind bridge: d0700000-d07fffff
Prefetchable memory behind bridge: 000000009fb00000-000000009fcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 3
[8086:9c14] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d0600000-d06fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 4
[8086:9c16] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d0500000-d05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 5
[8086:9c18] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d0400000-d04fffff
Prefetchable memory behind bridge: 00000000a0000000-00000000b01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series USB EHCI #1
[8086:9c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:2249]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d091d000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation 8 Series LPC Controller
[8086:9c43] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:2249]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series SATA Controller 1
[AHCI mode] [8086:9c03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:2249]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 48
Region 0: I/O ports at 8088 [size=8]
Region 1: I/O ports at 8094 [size=4]
Region 2: I/O ports at 8080 [size=8]
Region 3: I/O ports at 8090 [size=4]
Region 4: I/O ports at 8060 [size=32]
Region 5: Memory at d091c000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.6 Signal processing controller [1180]: Intel Corporation 8 Series Thermal
[8086:9c24] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:2249]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 10
Region 0: Memory at d091b000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI
Express Card Reader [10ec:5227] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:2249]
Physical Slot: 1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at d0700000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 10)
Subsystem: Hewlett-Packard Company Device [103c:2249]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: I/O ports at 5000 [size=256]
Region 2: Memory at d0604000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at d0600000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
09:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723BE
PCIe Wireless Network Adapter [10ec:b723]
Subsystem: Hewlett-Packard Company Device [103c:2231]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 4000 [size=256]
Region 2: Memory at d0500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: rtl8723be
0a:00.0 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] Topaz
PRO [Radeon R5 M255] [1002:6901]
Subsystem: Hewlett-Packard Company Device [103c:224a]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at a0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=2M]
Region 4: I/O ports at 3000 [size=256]
Region 5: Memory at d0400000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at d0440000 [disabled] [size=128K]
Capabilities: <access denied>
** USB devices:
Bus 003 Device 002: ID 8087:8000 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 04f2:b3c8 Chicony Electronics Co., Ltd
Bus 001 Device 004: ID 138a:003f Validity Sensors, Inc.
Bus 001 Device 003: ID 0bda:b001 Realtek Semiconductor Corp.
Bus 001 Device 002: ID 046d:c077 Logitech, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 8.4
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.4.0-0.bpo.1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.4.0-0.bpo.1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.120+deb8u1
ii kmod 18-3
ii linux-base 3.5
Versions of packages linux-image-4.4.0-0.bpo.1-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
Versions of packages linux-image-4.4.0-0.bpo.1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-22+deb8u1
pn linux-doc-4.4 <none>
Versions of packages linux-image-4.4.0-0.bpo.1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 20160110-1~bpo8+1
pn xen-hypervisor <none>
-- debconf information:
linux-image-4.4.0-0.bpo.1-amd64/prerm/removing-running-kernel-4.4.0-0.bpo.1-amd64:
true
--- End Message ---
signature.asc
