--- Begin Message ---
Package: kernel
Version: 3.16.7-ckt20-1+deb8 amd64
The issue is related to the suspend/resume brightness with i965 integrated video
controller. I am able to hibernate and resume but I'm not able to resume from
suspend. When I try to suspend both from GUI than from terminal (pm-suspend or
systemctl suspend) I get only a black screen on resume. The computer works but
it seems that the brightness is set to zero and I can not turn the screen on.
If I try to hibernate, on resume all works well. I try to switch from tt1 to
tt6
but nothing changes, the screen remain black. I also tried to use the
brightness
key but nothing happens.
I discovered the bug was not present in the previous debian
stable kernel 3.2 but is still present in the 4.2 and 4.3 kernel from
backports. I compiled my own 4.4 kernel and now all seems to work.
I run debian on a macbook 13".
This is the C shared lib:
-----
:~$ dpkg -l libc6
libc6:amd64 2.19-18+deb8u2 amd64
-----
This is my graphic card:
-----
:~$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller (primary) (rev 03)
-----
This is dmesg after system resumed:
------
:~# echo mem > /sys/power/state; dmesg > dmesg_after_resume; reboot
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org)
(gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt20-1+deb8u3
(2016-01-17)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64
root=UUID=c19ecd0c-f686-4d8e-b258-68744fb5d7ee ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdd30fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bdd31000-0x00000000bdf31fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bdf32000-0x00000000bdfe3fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bdfe4000-0x00000000bdfe5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bdfe6000-0x00000000beec2fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000beec3000-0x00000000beec4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000beec5000-0x00000000beec7fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000beec8000-0x00000000beecafff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000beecb000-0x00000000beecbfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000beecc000-0x00000000beedefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000beedf000-0x00000000beef8fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000beef9000-0x00000000beefefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000beeff000-0x00000000beefffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bef00000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Apple Inc. MacBook4,1/Mac-F22788A9, BIOS
MB41.88Z.00C1.B00.0802091535 02/09/08
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 0BF000000 mask FFF000000 uncachable
[ 0.000000] 5 base 0BEF00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbdd31 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
[ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbdd30fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbdbfffff] page 2M
[ 0.000000] [mem 0xbdc00000-0xbdd30fff] page 4k
[ 0.000000] RAMDISK: [mem 0x36130000-0x3708ffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 0x00000000BEEEE1C0 000084 (v01 APPLE Apple00
000000C1 01000013)
[ 0.000000] ACPI: FACP 0x00000000BEEEC000 0000F4 (v03 APPLE Apple00
000000C1 Loki 0000005F)
[ 0.000000] ACPI: DSDT 0x00000000BEEE1000 0045C6 (v01 APPLE MacBook
00040001 INTL 20061109)
[ 0.000000] ACPI: FACS 0x00000000BEECC000 000040
[ 0.000000] ACPI: FACS 0x00000000BEECC000 000040
[ 0.000000] ACPI: HPET 0x00000000BEEEB000 000038 (v01 APPLE Apple00
00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 0x00000000BEEEA000 000068 (v01 APPLE Apple00
00000001 Loki 0000005F)
[ 0.000000] ACPI: MCFG 0x00000000BEEE9000 00003C (v01 APPLE Apple00
00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! 0x00000000BEEE8000 0000A5 (v32 APPLE Apple00
00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 0x00000000BEEE7000 000030 (v01 APPLE Apple00
00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 0x00000000BEEE6000 000053 (v01 APPLE Apple00
00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000BEEC7000 0004DC (v01 APPLE CpuPm
00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000BEEC6000 00025F (v01 APPLE Cpu0Tst
00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000BEEC5000 0000A6 (v01 APPLE Cpu1Tst
00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000BEEE0000 000544 (v01 SataRe SataPri
00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000BEEDF000 000477 (v01 SataRe SataSec
00001000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fff8000-0x13fffcfff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD ->
[ffff88013b600000-ffff88013edfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbdd30fff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 1039567
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10575 pages used for memmap
[ 0.000000] DMA32 zone: 773425 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xbf000000-0xbfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdd31000-0xbdf31fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdf32000-0xbdfe3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdfe4000-0xbdfe5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdfe6000-0xbeec2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbeec3000-0xbeec4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbeec5000-0xbeec7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbeec8000-0xbeecafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbeecb000-0xbeecbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbeecc000-0xbeedefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbeedf000-0xbeef8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbeef9000-0xbeefefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbeeff000-0xbeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbef00000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed13fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192
d21504 u1048576
[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 1025331
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64
root=UUID=c19ecd0c-f686-4d8e-b258-68744fb5d7ee ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4007304K/4158268K available (5219K kernel code, 947K
rwdata, 1836K rodata, 1204K init, 840K bss, 150964K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: using HPET reference calibration
[ 0.000000] tsc: Detected 2094.746 MHz processor
[ 0.016013] Calibrating delay loop (skipped), value calculated using timer
frequency.. 4189.49 BogoMIPS (lpj=8378984)
[ 0.016017] pid_max: default: 32768 minimum: 301
[ 0.016028] ACPI: Core revision 20140424
[ 0.024188] ACPI: All ACPI Tables successfully acquired
[ 0.024229] Security Framework initialized
[ 0.024244] AppArmor: AppArmor disabled by boot time parameter
[ 0.024245] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.024611] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.026847] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.027972] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.027980] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.028402] Initializing cgroup subsys memory
[ 0.028410] Initializing cgroup subsys devices
[ 0.028422] Initializing cgroup subsys freezer
[ 0.028425] Initializing cgroup subsys net_cls
[ 0.028433] Initializing cgroup subsys blkio
[ 0.028438] Initializing cgroup subsys perf_event
[ 0.028441] Initializing cgroup subsys net_prio
[ 0.028476] CPU: Physical Processor ID: 0
[ 0.028477] CPU: Processor Core ID: 0
[ 0.028480] mce: CPU supports 6 MCE banks
[ 0.028490] CPU0: Thermal monitoring enabled (TM2)
[ 0.028494] process: using mwait in idle threads
[ 0.028501] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
[ 0.028599] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 -
ffffffff81a20000)
[ 0.030685] ftrace: allocating 21679 entries in 85 pages
[ 0.036523] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.078420] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz
(fam: 06, model: 17, stepping: 06)
[ 0.080000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel
PMU driver.
[ 0.080000] ... version: 2
[ 0.080000] ... bit width: 40
[ 0.080000] ... generic registers: 2
[ 0.080000] ... value mask: 000000ffffffffff
[ 0.080000] ... max period: 000000007fffffff
[ 0.080000] ... fixed-purpose events: 3
[ 0.080000] ... event mask: 0000000700000003
[ 0.080000] x86: Booting SMP configuration:
[ 0.080000] .... node #0, CPUs: #1
[ 0.091341] x86: Booted up 1 node, 2 CPUs
[ 0.091347] smpboot: Total of 2 processors activated (8378.98 BogoMIPS)
[ 0.091447] NMI watchdog: enabled on all CPUs, permanently consumes one
hw-PMU counter.
[ 0.092124] devtmpfs: initialized
[ 0.096021] PM: Registering ACPI NVS region [mem 0xbdd31000-0xbdf31fff]
(2101248 bytes)
[ 0.096073] PM: Registering ACPI NVS region [mem 0xbdfe4000-0xbdfe5fff]
(8192 bytes)
[ 0.096075] PM: Registering ACPI NVS region [mem 0xbeec3000-0xbeec4fff]
(8192 bytes)
[ 0.096076] PM: Registering ACPI NVS region [mem 0xbeec8000-0xbeecafff]
(12288 bytes)
[ 0.096078] PM: Registering ACPI NVS region [mem 0xbeecc000-0xbeedefff]
(77824 bytes)
[ 0.097320] pinctrl core: initialized pinctrl subsystem
[ 0.097416] NET: Registered protocol family 16
[ 0.097564] cpuidle: using governor ladder
[ 0.097567] cpuidle: using governor menu
[ 0.097611] ACPI: bus type PCI registered
[ 0.097613] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.097722] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.097726] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820
[ 0.097729] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff]
(base 0xf0000000) (size reduced!)
[ 0.097729] PCI: Using configuration type 1 for base access
[ 0.097729] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.097729] mtrr: probably your BIOS does not setup all CPUs.
[ 0.097729] mtrr: corrected configuration.
[ 0.108089] ACPI: Added _OSI(Module Device)
[ 0.108089] ACPI: Added _OSI(Processor Device)
[ 0.108089] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.108089] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.112649] ACPI : EC: EC description table is found, configuring boot EC
[ 0.113400] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.120334] ACPI: Dynamic OEM Table Load:
[ 0.120344] ACPI: SSDT 0xFFFF88013A90E000 0002FE (v01 APPLE Cpu0Ist
00003000 INTL 20061109)
[ 0.120663] ACPI: Dynamic OEM Table Load:
[ 0.120671] ACPI: SSDT 0xFFFF88013A937C00 0002AD (v01 APPLE Cpu0Cst
00003001 INTL 20061109)
[ 0.144206] ACPI: Dynamic OEM Table Load:
[ 0.144214] ACPI: SSDT 0xFFFF88013A8BE200 0000C8 (v01 APPLE Cpu1Ist
00003000 INTL 20061109)
[ 0.144490] ACPI: Dynamic OEM Table Load:
[ 0.144497] ACPI: SSDT 0xFFFF88013A903AC0 000085 (v01 APPLE Cpu1Cst
00003000 INTL 20061109)
[ 0.168162] ACPI: Interpreter enabled
[ 0.168168] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S1_] (20140424/hwxface-580)
[ 0.168173] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S2_] (20140424/hwxface-580)
[ 0.168188] ACPI: (supports S0 S3 S4 S5)
[ 0.168190] ACPI: Using IOAPIC for interrupt routing
[ 0.168222] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.188746] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.188753] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM
Segments MSI]
[ 0.189120] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER
PCIeCapability]
[ 0.189714] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus
00-3f] only partially covers this bridge
[ 0.189882] PCI host bridge to bus 0000:00
[ 0.189886] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.189888] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.189890] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.189893] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.189896] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[ 0.189906] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[ 0.190023] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
[ 0.190037] pci 0000:00:02.0: reg 0x10: [mem 0xd0100000-0xd01fffff 64bit]
[ 0.190046] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit
pref]
[ 0.190052] pci 0000:00:02.0: reg 0x20: [io 0x6110-0x6117]
[ 0.190155] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
[ 0.190167] pci 0000:00:02.1: reg 0x10: [mem 0xd0200000-0xd02fffff 64bit]
[ 0.190314] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[ 0.190370] pci 0000:00:1a.0: reg 0x20: [io 0x60c0-0x60df]
[ 0.190453] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.190511] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[ 0.190567] pci 0000:00:1a.1: reg 0x20: [io 0x60a0-0x60bf]
[ 0.190648] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.190719] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[ 0.190744] pci 0000:00:1a.7: reg 0x10: [mem 0xd0704c00-0xd0704fff]
[ 0.190851] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.190897] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.190964] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[ 0.190989] pci 0000:00:1b.0: reg 0x10: [mem 0xd0700000-0xd0703fff 64bit]
[ 0.191104] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.191210] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[ 0.191321] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.192089] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
[ 0.192210] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.192320] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
[ 0.192441] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.192546] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[ 0.192602] pci 0000:00:1d.0: reg 0x20: [io 0x6080-0x609f]
[ 0.192683] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.192739] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[ 0.192795] pci 0000:00:1d.1: reg 0x20: [io 0x6060-0x607f]
[ 0.192876] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.192933] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[ 0.192989] pci 0000:00:1d.2: reg 0x20: [io 0x6040-0x605f]
[ 0.193071] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.193142] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[ 0.193167] pci 0000:00:1d.7: reg 0x10: [mem 0xd0704800-0xd0704bff]
[ 0.193274] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.193319] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.193380] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.193542] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[ 0.193655] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0400-0x047f]:
address conflict with ACPI CPU throttle [io 0x0410-0x0415]
[ 0.193661] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.193666] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask
000f)
[ 0.193670] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask
000f)
[ 0.193677] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask
001f)
[ 0.193798] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018f
[ 0.193815] pci 0000:00:1f.1: reg 0x10: [io 0x6108-0x610f]
[ 0.193827] pci 0000:00:1f.1: reg 0x14: [io 0x6124-0x6127]
[ 0.193839] pci 0000:00:1f.1: reg 0x18: [io 0x6100-0x6107]
[ 0.193851] pci 0000:00:1f.1: reg 0x1c: [io 0x6120-0x6123]
[ 0.193863] pci 0000:00:1f.1: reg 0x20: [io 0x60e0-0x60ef]
[ 0.193977] pci 0000:00:1f.2: [8086:2828] type 00 class 0x01018f
[ 0.193998] pci 0000:00:1f.2: reg 0x10: [io 0x60f8-0x60ff]
[ 0.194010] pci 0000:00:1f.2: reg 0x14: [io 0x611c-0x611f]
[ 0.194022] pci 0000:00:1f.2: reg 0x18: [io 0x60f0-0x60f7]
[ 0.194035] pci 0000:00:1f.2: reg 0x1c: [io 0x6118-0x611b]
[ 0.194047] pci 0000:00:1f.2: reg 0x20: [io 0x6020-0x602f]
[ 0.194059] pci 0000:00:1f.2: reg 0x24: [io 0x4000-0x400f]
[ 0.194105] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.194197] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[ 0.194214] pci 0000:00:1f.3: reg 0x10: [mem 0xd0705000-0xd07050ff]
[ 0.194255] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.194440] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.194448] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff]
[ 0.194585] pci 0000:02:00.0: [14e4:4328] type 00 class 0x028000
[ 0.194621] pci 0000:02:00.0: reg 0x10: [mem 0xd0500000-0xd0503fff 64bit]
[ 0.194647] pci 0000:02:00.0: reg 0x18: [mem 0xd0000000-0xd00fffff 64bit
pref]
[ 0.194810] pci 0000:02:00.0: supports D1 D2
[ 0.194812] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.194857] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.200020] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.200028] pci 0000:00:1c.4: bridge window [mem 0xd0500000-0xd05fffff]
[ 0.200036] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd00fffff
64bit pref]
[ 0.200298] pci 0000:03:00.0: [11ab:436a] type 00 class 0x020000
[ 0.200484] pci 0000:03:00.0: reg 0x10: [mem 0xd0400000-0xd0403fff 64bit]
[ 0.200558] pci 0000:03:00.0: reg 0x18: [io 0x5000-0x50ff]
[ 0.200859] pci 0000:03:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.201394] pci 0000:03:00.0: supports D1 D2
[ 0.201396] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.201501] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.201671] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.201676] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff]
[ 0.201681] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff]
[ 0.201767] pci 0000:04:03.0: [11c1:5811] type 00 class 0x0c0010
[ 0.201791] pci 0000:04:03.0: reg 0x10: [mem 0xd0300000-0xd0300fff]
[ 0.201892] pci 0000:04:03.0: supports D1 D2
[ 0.201894] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.202012] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.202020] pci 0000:00:1e.0: bridge window [mem 0xd0300000-0xd03fffff]
[ 0.202028] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.202031] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.202033] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
[ 0.202035] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff]
(subtractive decode)
[ 0.202211] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15)
*11
[ 0.202275] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.202337] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.202399] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15)
*0, disabled.
[ 0.202461] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.202522] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *9
[ 0.202584] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15)
*0, disabled.
[ 0.202646] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15)
*0, disabled.
[ 0.204140] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.204178] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.204270] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.204270] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.204270] vgaarb: loaded
[ 0.204270] vgaarb: bridge control possible 0000:00:02.0
[ 0.204270] PCI: Using ACPI for IRQ routing
[ 0.204768] PCI: pci_cache_line_size set to 64 bytes
[ 0.204878] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.204880] e820: reserve RAM buffer [mem 0xbdd31000-0xbfffffff]
[ 0.205046] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.205052] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.205056] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.208024] Switched to clocksource hpet
[ 0.216271] pnp: PnP ACPI init
[ 0.216288] ACPI: bus type PNP registered
[ 0.216526] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.216530] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.216533] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.216536] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.216539] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.216542] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.216544] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.216549] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.216908] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.216912] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01
(active)
[ 0.216990] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.216993] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.216996] system 00:02: [io 0x0810-0x0817] has been reserved
[ 0.217000] system 00:02: [io 0x0400-0x047f] could not be reserved
[ 0.217002] system 00:02: [io 0x0500-0x053f] has been reserved
[ 0.217005] system 00:02: [io 0x1640-0x164f] has been reserved
[ 0.217008] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.217053] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.220767] pnp: PnP ACPI: found 4 devices
[ 0.220769] ACPI: bus type PNP unregistered
[ 0.228451] pci 0000:03:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff
pref]: no compatible bridge window
[ 0.228471] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01]
add_size 1000
[ 0.228475] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit
pref] to [bus 01] add_size 200000
[ 0.228487] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 02]
add_size 1000
[ 0.228499] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit
pref] to [bus 03] add_size 200000
[ 0.228514] pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
[ 0.228518] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref]
get_res_add_size add_size 200000
[ 0.228520] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref]
get_res_add_size add_size 200000
[ 0.228523] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size
add_size 1000
[ 0.228526] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size
add_size 1000
[ 0.228534] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0800000-0xd09fffff
64bit pref]
[ 0.228539] pci 0000:00:1c.5: BAR 15: assigned [mem 0xd0a00000-0xd0bfffff
64bit pref]
[ 0.228542] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.228545] pci 0000:00:1c.4: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.228548] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.228552] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.228559] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff]
[ 0.228565] pci 0000:00:1c.0: bridge window [mem 0xd0800000-0xd09fffff
64bit pref]
[ 0.228572] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.228576] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.228582] pci 0000:00:1c.4: bridge window [mem 0xd0500000-0xd05fffff]
[ 0.228588] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd00fffff
64bit pref]
[ 0.228596] pci 0000:03:00.0: BAR 6: assigned [mem 0xd0420000-0xd043ffff
pref]
[ 0.228599] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.228602] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff]
[ 0.228609] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff]
[ 0.228614] pci 0000:00:1c.5: bridge window [mem 0xd0a00000-0xd0bfffff
64bit pref]
[ 0.228622] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.228628] pci 0000:00:1e.0: bridge window [mem 0xd0300000-0xd03fffff]
[ 0.228640] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.228642] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.228644] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.228647] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
[ 0.228650] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.228652] pci_bus 0000:01: resource 1 [mem 0xd0600000-0xd06fffff]
[ 0.228654] pci_bus 0000:01: resource 2 [mem 0xd0800000-0xd09fffff 64bit
pref]
[ 0.228657] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.228659] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff]
[ 0.228661] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit
pref]
[ 0.228664] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.228666] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff]
[ 0.228668] pci_bus 0000:03: resource 2 [mem 0xd0a00000-0xd0bfffff 64bit
pref]
[ 0.228671] pci_bus 0000:04: resource 1 [mem 0xd0300000-0xd03fffff]
[ 0.228673] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.228675] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.228678] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.228680] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfebfffff]
[ 0.228736] NET: Registered protocol family 2
[ 0.229012] TCP established hash table entries: 32768 (order: 6, 262144
bytes)
[ 0.229166] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.229390] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.229449] TCP: reno registered
[ 0.229456] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.229491] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.229581] NET: Registered protocol family 1
[ 0.229603] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.231263] PCI: CLS mismatch (256 != 64), using 64 bytes
[ 0.231328] Unpacking initramfs...
[ 0.597563] Freeing initrd memory: 15744K (ffff880036130000 -
ffff880037090000)
[ 0.597621] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.597624] software IO TLB [mem 0xb9d31000-0xbdd31000] (64MB) mapped at
[ffff8800b9d31000-ffff8800bdd30fff]
[ 0.597853] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
[ 0.597863] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
[ 0.597970] microcode: Microcode Update Driver: v2.00
<tig...@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.598349] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.598392] audit: initializing netlink subsys (disabled)
[ 0.598429] audit: type=2000 audit(1454535892.596:1): initialized
[ 0.598894] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.598921] zbud: loaded
[ 0.599123] VFS: Disk quotas dquot_6.5.2
[ 0.599142] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.599213] msgmni has been set to 7857
[ 0.599612] alg: No test for stdrng (krng)
[ 0.599644] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
252)
[ 0.599701] io scheduler noop registered
[ 0.599705] io scheduler deadline registered
[ 0.599747] io scheduler cfq registered (default)
[ 0.599841] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.600066] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.600342] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
[ 0.600613] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.600792] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.600799] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.600824] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.600826] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.600831] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.600857] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.600860] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.600865] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.600889] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.600951] pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd-
PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
[ 0.600985] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.601002] pciehp 0000:00:1c.4:pcie04: Slot #4 AttnBtn- AttnInd- PwrInd-
PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
[ 0.601029] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
[ 0.601046] pciehp 0000:00:1c.5:pcie04: Slot #5 AttnBtn- AttnInd- PwrInd-
PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
[ 0.601073] pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
[ 0.601080] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.601109] intel_idle: does not run on family 6 model 23
[ 0.601169] GHES: HEST is not enabled!
[ 0.601312] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.601858] Linux agpgart interface v0.103
[ 0.601941] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 0.601961] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total,
262144K mappable
[ 0.602833] agpgart-intel 0000:00:00.0: detected 16384K stolen memory
[ 0.602972] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 0.603106] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.596019] tsc: Refined TSC clocksource calibration: 2094.749 MHz
[ 1.625842] i8042: No controller found
[ 1.625996] mousedev: PS/2 mouse device common for all mice
[ 1.626055] rtc_cmos 00:03: RTC can wake from S4
[ 1.626232] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.626270] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram,
hpet irqs
[ 1.626285] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.626578] AMD IOMMUv2 driver by Joerg Roedel <joerg.roe...@amd.com>
[ 1.626580] AMD IOMMUv2 functionality not available on this system
[ 1.626688] TCP: cubic registered
[ 1.626733] NET: Registered protocol family 10
[ 1.626976] mip6: Mobile IPv6
[ 1.626980] NET: Registered protocol family 17
[ 1.626987] mpls_gso: MPLS GSO support
[ 1.627313] registered taskstats version 1
[ 1.628141] rtc_cmos 00:03: setting system clock to 2016-02-03 21:44:54 UTC
(1454535894)
[ 1.628262] PM: Hibernation image not present or could not be loaded.
[ 1.629408] Freeing unused kernel memory: 1204K (ffffffff818ee000 -
ffffffff81a1b000)
[ 1.629411] Write protecting the kernel read-only data: 8192k
[ 1.629892] Freeing unused kernel memory: 912K (ffff88000151c000 -
ffff880001600000)
[ 1.630486] Freeing unused kernel memory: 212K (ffff8800017cb000 -
ffff880001800000)
[ 1.699401] systemd-udevd[63]: starting version 215
[ 1.699773] random: systemd-udevd urandom read with 5 bits of entropy
available
[ 1.711689] ACPI: bus type USB registered
[ 1.711727] usbcore: registered new interface driver usbfs
[ 1.711741] usbcore: registered new interface driver hub
[ 1.720340] usbcore: registered new device driver usb
[ 1.720884] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.721060] ehci-pci: EHCI PCI platform driver
[ 1.721237] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.721278] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.721287] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus
number 1
[ 1.721305] ehci-pci 0000:00:1a.7: debug port 1
[ 1.725220] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 1.725990] ehci-pci 0000:00:1a.7: irq 21, io mem 0xd0704c00
[ 1.729474] sky2: driver version 1.30
[ 1.729701] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 3
[ 1.729971] sky2 0000:03:00.0: irq 43 for MSI/MSI-X
[ 1.730589] sky2 0000:03:00.0 eth0: addr 00:22:41:3a:7f:e6
[ 1.736052] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.736419] SCSI subsystem initialized
[ 1.737430] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.737434] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.737437] usb usb1: Product: EHCI Host Controller
[ 1.737439] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 1.737441] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.740068] hub 1-0:1.0: USB hub found
[ 1.740081] hub 1-0:1.0: 4 ports detected
[ 1.740434] libata version 3.00 loaded.
[ 1.740515] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.740523] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus
number 2
[ 1.740540] ehci-pci 0000:00:1d.7: debug port 1
[ 1.744444] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.744475] ssb: Found chip with id 0x4321, rev 0x03 and package 0x00
[ 1.744484] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x13, vendor 0x4243)
[ 1.744492] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0C, vendor
0x4243)
[ 1.744501] ssb: Core 2 found: PCI-E (cc 0x820, rev 0x04, vendor 0x4243)
[ 1.744509] ssb: Core 3 found: PCI (cc 0x804, rev 0x0D, vendor 0x4243)
[ 1.744518] ssb: Core 4 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor
0x4243)
[ 1.744549] ehci-pci 0000:00:1d.7: irq 20, io mem 0xd0704800
[ 1.756062] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.756115] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.756118] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.756121] usb usb2: Product: EHCI Host Controller
[ 1.756123] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 1.756125] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.756516] hub 2-0:1.0: USB hub found
[ 1.756526] hub 2-0:1.0: 6 ports detected
[ 1.757210] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.757218] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 3
[ 1.757229] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 1.757252] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000060c0
[ 1.757397] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.757401] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.757403] usb usb3: Product: UHCI Host Controller
[ 1.757406] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[ 1.757408] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.757551] hub 3-0:1.0: USB hub found
[ 1.757560] hub 3-0:1.0: 2 ports detected
[ 1.757820] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.757827] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 4
[ 1.757836] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 1.757872] uhci_hcd 0000:00:1a.1: irq 16, io base 0x000060a0
[ 1.757930] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.757933] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.757935] usb usb4: Product: UHCI Host Controller
[ 1.757937] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[ 1.757940] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.758195] hub 4-0:1.0: USB hub found
[ 1.758205] hub 4-0:1.0: 2 ports detected
[ 1.758461] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.758468] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 5
[ 1.758478] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.758500] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
[ 1.758558] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.758561] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.758563] usb usb5: Product: UHCI Host Controller
[ 1.758565] usb usb5: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[ 1.758568] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.758812] hub 5-0:1.0: USB hub found
[ 1.758822] hub 5-0:1.0: 2 ports detected
[ 1.759079] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.759086] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 6
[ 1.759095] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.759132] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00006060
[ 1.759193] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.759196] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.759198] usb usb6: Product: UHCI Host Controller
[ 1.759201] usb usb6: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[ 1.759203] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.759389] hub 6-0:1.0: USB hub found
[ 1.759398] hub 6-0:1.0: 2 ports detected
[ 1.759651] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.759658] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 7
[ 1.759666] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.759691] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006040
[ 1.759746] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.759748] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.759751] usb usb7: Product: UHCI Host Controller
[ 1.759753] usb usb7: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[ 1.759755] usb usb7: SerialNumber: 0000:00:1d.2
[ 1.759959] hub 7-0:1.0: USB hub found
[ 1.759968] hub 7-0:1.0: 2 ports detected
[ 1.760173] ata_piix 0000:00:1f.1: version 2.13
[ 1.761040] scsi0 : ata_piix
[ 1.761155] scsi1 : ata_piix
[ 1.761212] ata1: PATA max UDMA/100 cmd 0x6108 ctl 0x6124 bmdma 0x60e0 irq 21
[ 1.761214] ata2: PATA max UDMA/100 cmd 0x6100 ctl 0x6120 bmdma 0x60e8 irq 21
[ 1.761340] ata_piix 0000:00:1f.2: MAP [ P0 -- -- -- ]
[ 1.762075] scsi2 : ata_piix
[ 1.762170] scsi3 : ata_piix
[ 1.762225] ata3: SATA max UDMA/133 cmd 0x60f8 ctl 0x611c bmdma 0x6020 irq 18
[ 1.762227] ata4: SATA max UDMA/133 cmd 0x60f0 ctl 0x6118 bmdma 0x6028 irq 18
[ 1.800089] firewire_ohci 0000:04:03.0: added OHCI v1.0 device as card 0, 8
IR + 8 IT contexts, quirks 0x0
[ 1.808116] ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
[ 1.935569] ata3.00: ATA-9: WDC WD5000LPVX-00V0TT0, 01.01A01, max UDMA/133
[ 1.935572] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.936348] ata1.00: ATAPI: MATSHITACD-RW CW-8221, GA0K, max UDMA/33
[ 1.940304] ata3.00: configured for UDMA/133
[ 1.952234] ata1.00: configured for UDMA/33
[ 1.981810] scsi 0:0:0:0: CD-ROM MATSHITA CD-RW CW-8221 GA0K
PQ: 0 ANSI: 5
[ 1.991956] scsi 2:0:0:0: Direct-Access ATA WDC WD5000LPVX-0 1A01
PQ: 0 ANSI: 5
[ 2.027740] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 2.027744] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.027901] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.028309] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465
GiB)
[ 2.028312] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 2.028540] sd 2:0:0:0: [sda] Write Protect is off
[ 2.028544] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.028579] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 2.028616] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.028626] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.076073] sda: sda1 sda2 sda3
[ 2.076501] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.300114] firewire_core 0000:04:03.0: created device fw0: GUID
002312fffef50e52, S400
[ 2.436027] raid6: sse2x1 3355 MB/s
[ 2.440020] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 2.504018] raid6: sse2x2 3528 MB/s
[ 2.572009] raid6: sse2x4 6103 MB/s
[ 2.572011] raid6: using algorithm sse2x4 (6103 MB/s)
[ 2.572013] raid6: using ssse3x2 recovery algorithm
[ 2.572218] xor: measuring software checksum speed
[ 2.612009] prefetch64-sse: 8590.000 MB/sec
[ 2.652009] generic_sse: 7604.000 MB/sec
[ 2.652011] xor: using function: prefetch64-sse (8590.000 MB/sec)
[ 2.652027] Switched to clocksource tsc
[ 2.678301] usb 3-1: New USB device found, idVendor=05ac, idProduct=1000
[ 2.678305] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.681380] Btrfs loaded
[ 2.683671] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.684249] usbhid 3-1:1.0: couldn't find an input interrupt endpoint
[ 2.684332] usbcore: registered new interface driver usbhid
[ 2.684333] usbhid: USB HID core driver
[ 2.792022] usb 2-4: new high-speed USB device number 2 using ehci-pci
[ 2.810647] PM: Starting manual resume from disk
[ 2.810652] PM: Hibernation image partition 8:3 present
[ 2.810654] PM: Looking for hibernation image.
[ 2.810859] PM: Image not found (code -22)
[ 2.810861] PM: Hibernation image not present or could not be loaded.
[ 2.813381] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 2.813387] PM: Marking nosave pages: [mem 0xbdd31000-0xffffffff]
[ 2.814430] PM: Basic memory bitmaps created
[ 2.829855] PM: Basic memory bitmaps freed
[ 2.924349] usb 2-4: New USB device found, idVendor=05ac, idProduct=8300
[ 2.924353] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.001812] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
(null)
[ 3.480012] usb 7-1: new low-speed USB device number 2 using uhci_hcd
[ 3.657736] usb 7-1: New USB device found, idVendor=05ac, idProduct=8242
[ 3.657740] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.657743] usb 7-1: Product: IR Receiver
[ 3.657745] usb 7-1: Manufacturer: Apple Computer, Inc.
[ 3.815066] random: nonblocking pool is initialized
[ 3.920012] usb 7-2: new full-speed USB device number 3 using uhci_hcd
[ 4.111739] usb 7-2: New USB device found, idVendor=05ac, idProduct=022a
[ 4.111743] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.111746] usb 7-2: Product: Apple Internal Keyboard / Trackpad
[ 4.111748] usb 7-2: Manufacturer: Apple Computer
[ 7.351232] lp: driver loaded but no devices found
[ 7.461320] ppdev: user-space parallel port driver
[ 7.671218] fuse init (API version 7.23)
[ 7.791495] loop: module loaded
[ 8.207770] systemd-udevd[185]: starting version 215
[ 10.276223] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 10.479682] systemd-journald[177]: Received request to flush runtime journal
from PID 1
[ 11.089458] Monitor-Mwait will be used to enter C-1 state
[ 11.089465] Monitor-Mwait will be used to enter C-2 state
[ 11.089469] Monitor-Mwait will be used to enter C-3 state
[ 11.089472] tsc: Marking TSC unstable due to TSC halts in idle
[ 11.089485] ACPI: acpi_idle registered with cpuidle
[ 11.089529] Switched to clocksource hpet
[ 11.375877] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.432743] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.444867] ACPI : EC: GPE storm detected(10 GPEs), transactions will use
polling mode
[ 11.531287] [drm] Initialized drm 1.1.0 20060810
[ 11.778905] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 11.779068] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input0
[ 12.093364] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 12.312596] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 12.848467] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 12.953718] sound hdaudioC0D0: ALC889A: SKU not ready 0x400000f0
[ 12.954029] sound hdaudioC0D0: autoconfig: line_outs=2
(0x14/0x16/0x0/0x0/0x0) type:speaker
[ 12.954032] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.954035] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 12.954037] sound hdaudioC0D0: mono: mono_out=0x0
[ 12.954039] sound hdaudioC0D0: dig-out=0x1e/0x0
[ 12.954041] sound hdaudioC0D0: inputs:
[ 12.954043] sound hdaudioC0D0: Mic=0x18
[ 12.954046] sound hdaudioC0D0: Line=0x1a
[ 12.954048] sound hdaudioC0D0: dig-in=0x1f
[ 12.966279] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input1
[ 12.966556] input: HDA Intel Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input2
[ 12.966603] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input3
[ 13.512163] ACPI: Battery Slot [BAT0] (battery present)
[ 13.513231] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 13.513262] ACPI: Lid Switch [LID0]
[ 13.513326] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 13.513331] ACPI: Power Button [PWRB]
[ 13.513390] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[ 13.513393] ACPI: Sleep Button [SLPB]
[ 13.513464] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 13.513467] ACPI: Power Button [PWRF]
[ 13.513957] ACPI: AC Adapter [ADP1] (on-line)
[ 13.985892] ACPI Warning: SystemIO range
0x000000000000EFA0-0x000000000000EFBF conflicts with OpRegion
0x000000000000EFA0-0x000000000000EFAF (\_SB_.PCI0.SBUS.SMBI)
(20140424/utaddress-254)
[ 13.985901] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 14.131981] [drm] Memory usable by graphics device = 512M
[ 14.131985] [drm] Replacing VGA console driver
[ 14.132548] Console: switching to colour dummy device 80x25
[ 14.133301] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 14.133310] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 14.133312] [drm] Driver supports precise vblank timestamp query.
[ 14.133391] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 14.329567] [drm] GPU HANG: ecode -1:0x00000000, reason: Command parser
error, iir 0x00008000, action: continue
[ 14.329571] [drm] GPU hangs can indicate a bug anywhere in the entire gfx
stack, including userspace.
[ 14.329573] [drm] Please file a _new_ bug report on bugs.freedesktop.org
against DRI -> DRM/Intel
[ 14.329574] [drm] drm/i915 developers can then reassign to the right
component if it's not a kernel issue.
[ 14.329576] [drm] The gpu crash dump is required to analyze gpu hangs, so
please always attach it.
[ 14.329577] [drm] GPU crash dump saved to /sys/class/drm/card0/error
[ 14.329579] i915: render error detected, EIR: 0x00000010
[ 14.329584] i915: page table error
[ 14.329586] i915: PGTBL_ER: 0x00000100
[ 14.329590] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010,
masking
[ 14.329645] [drm] initialized overlay support
[ 14.434634] fbcon: inteldrmfb (fb0) is primary device
[ 14.634151] cfg80211: Calling CRDA to update world regulatory domain
[ 14.803723] b43-phy0: Broadcom 4321 WLAN found (core revision 12)
[ 14.832047] b43-phy0: Found PHY: Analog 5, Type 4 (N), Revision 2
[ 14.832071] b43-phy0 warning: 5 GHz band is unsupported on this PHY
[ 14.844189] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 14.923298] b43 ssb0:0: firmware: direct-loading firmware b43/ucode11.fw
[ 15.002793] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 15.032681] Console: switching to colour frame buffer device 160x50
[ 15.035733] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 15.035735] i915 0000:00:02.0: registered panic notifier
[ 15.056735] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 15.056823] ACPI Warning: SystemIO range
0x0000000000000428-0x000000000000042F conflicts with OpRegion
0x0000000000000400-0x000000000000047F (\PMIO) (20140424/utaddress-254)
[ 15.056829] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 15.056833] ACPI Warning: SystemIO range
0x0000000000000530-0x000000000000053F conflicts with OpRegion
0x0000000000000500-0x000000000000053B (\GPIO) (20140424/utaddress-254)
[ 15.056838] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 15.056839] ACPI Warning: SystemIO range
0x0000000000000500-0x000000000000052F conflicts with OpRegion
0x0000000000000500-0x000000000000053B (\GPIO) (20140424/utaddress-254)
[ 15.056843] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 15.056845] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 15.141814] b43 ssb0:0: firmware: direct-loading firmware b43/n0initvals11.fw
[ 15.153145] b43 ssb0:0: firmware: direct-loading firmware
b43/n0bsinitvals11.fw
[ 15.180547] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 15.461088] applesmc: key=220 fan=1 temp=10 index=10 acc=1 lux=0 kbd=0
[ 15.488701] input: applesmc as /devices/platform/applesmc.768/input/input9
[ 16.181202] iTCO_vendor_support: vendor-support=0
[ 16.187098] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 16.187159] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
[ 16.187408] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.541360] usb 3-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0
len 0 ret -71
[ 16.862759] appletouch 7-2:1.1: Geyser mode initialized.
[ 16.862872] input: appletouch as
/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input10
[ 16.862993] usbcore: registered new interface driver appletouch
[ 16.888211] usb 3-1: USB disconnect, device number 2
[ 16.892738] input: Apple Computer Apple Internal Keyboard / Trackpad as
/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/0003:05AC:022A.0002/input/input11
[ 16.893032] apple 0003:05AC:022A.0002: input,hidraw0: USB HID v1.11 Keyboard
[Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input0
[ 16.893863] input: Apple Computer Apple Internal Keyboard / Trackpad as
/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.2/0003:05AC:022A.0003/input/input12
[ 16.893946] apple 0003:05AC:022A.0003: input,hidraw1: USB HID v1.11 Device
[Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input2
[ 16.900865] input: Apple Computer, Inc. IR Receiver as
/devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/0003:05AC:8242.0001/input/input13
[ 16.901012] appleir 0003:05AC:8242.0001: input,hiddev0,hidraw2: USB HID
v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0
[ 17.057969] Non-volatile memory driver v1.3
[ 17.128128] usb 3-1: new full-speed USB device number 3 using uhci_hcd
[ 17.329330] usb 3-1: New USB device found, idVendor=05ac, idProduct=8205
[ 17.329335] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 18.156274] cfg80211: World regulatory domain updated:
[ 18.156279] cfg80211: DFS Master region: unset
[ 18.156280] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 18.156283] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 18.156286] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 18.156288] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm), (N/A)
[ 18.156291] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 18.156294] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 18.156296] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[ 18.156298] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 18.156301] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 18.327633] Bluetooth: Core ver 2.19
[ 18.327664] NET: Registered protocol family 31
[ 18.327666] Bluetooth: HCI device and connection manager initialized
[ 18.327681] Bluetooth: HCI socket layer initialized
[ 18.327684] Bluetooth: L2CAP socket layer initialized
[ 18.327699] Bluetooth: SCO socket layer initialized
[ 18.590118] usbcore: registered new interface driver btusb
[ 18.778674] Adding 4119548k swap on /dev/sda3. Priority:-1 extents:1
across:4119548k FS
[ 19.428190] usb 2-4: firmware: failed to load isight.fw (-2)
[ 19.428232] usb 2-4: Direct firmware load failed with error -2
[ 19.428235] usb 2-4: Falling back to user helper
[ 19.428891] usbcore: registered new interface driver isight_firmware
[ 21.620461] vboxdrv: Found 2 processor cores.
[ 21.620942] vboxdrv: fAsync=0 offMin=0x1b9 offMax=0x757
[ 21.621035] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 21.621037] vboxdrv: Successfully loaded version 4.3.32_Debian (interface
0x001a000b).
[ 22.367074] vboxpci: IOMMU not found (not registered)
[ 28.755878] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 28.755883] Bluetooth: BNEP filters: protocol multicast
[ 28.755895] Bluetooth: BNEP socket layer initialized
[ 33.021955] sky2 0000:03:00.0 eth0: enabling interface
[ 33.022217] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 33.204064] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 33.309045] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 35.504483] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[ 35.522731] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[ 36.235213] wlan0: authenticate with 6c:b0:ce:b0:38:4a
[ 36.244248] wlan0: send auth to 6c:b0:ce:b0:38:4a (try 1/3)
[ 36.245794] wlan0: authenticated
[ 36.248091] wlan0: associate with 6c:b0:ce:b0:38:4a (try 1/3)
[ 36.251260] wlan0: RX AssocResp from 6c:b0:ce:b0:38:4a (capab=0x411 status=0
aid=2)
[ 36.251708] wlan0: associated
[ 36.251735] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 590.190375] PM: Syncing filesystems ... done.
[ 590.335743] PM: Preparing system for mem sleep
[ 590.335932] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 590.337638] Freezing remaining freezable tasks ... (elapsed 0.001 seconds)
done.
[ 590.338786] PM: Entering mem sleep
[ 590.338944] Suspending console(s) (use no_console_suspend to debug)
[ 590.339367] wlan0: deauthenticating from 6c:b0:ce:b0:38:4a by local choice
(Reason: 3=DEAUTH_LEAVING)
[ 590.384256] cfg80211: Calling CRDA to update world regulatory domain
[ 590.384682] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 590.416459] sd 2:0:0:0: [sda] Stopping disk
[ 590.992179] PM: suspend of devices complete after 652.902 msecs
[ 591.008111] PM: late suspend of devices complete after 15.926 msecs
[ 591.008631] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 591.008661] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[ 591.008753] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[ 591.008772] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 591.008999] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[ 591.009002] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[ 591.009098] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[ 591.164143] PM: noirq suspend of devices complete after 156.028 msecs
[ 591.164546] ACPI: Preparing to enter system sleep state S3
[ 591.220096] PM: Saving platform NVS memory
[ 591.223267] Disabling non-boot CPUs ...
[ 591.224548] kvm: disabling virtualization on CPU1
[ 591.224576] smpboot: CPU 1 is now offline
[ 591.224852] ACPI: Low-level resume complete
[ 591.224852] PM: Restoring platform NVS memory
[ 591.224852] Enabling non-boot CPUs ...
[ 591.224852] x86: Booting SMP configuration:
[ 591.224852] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 591.224554] kvm: enabling virtualization on CPU1
[ 591.236715] CPU1 is up
[ 591.239405] ACPI: Waking up from system sleep state S3
[ 591.532212] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[ 591.532265] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[ 591.532632] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 591.532683] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[ 591.532733] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[ 591.548187] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 591.548366] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 591.688275] PM: noirq resume of devices complete after 156.196 msecs
[ 591.688322] pciehp 0000:00:1c.5:pcie04: Card present on Slot(5)
[ 591.688327] pciehp 0000:00:1c.5:pcie04: slot(5): Link Up event
[ 591.688339] pciehp 0000:00:1c.4:pcie04: Card present on Slot(4)
[ 591.688343] pciehp 0000:00:1c.4:pcie04: slot(4): Link Up event
[ 591.688423] pciehp 0000:00:1c.5:pcie04: Link Up event ignored on slot(5):
already powering on
[ 591.688426] pciehp 0000:00:1c.4:pcie04: Link Up event ignored on slot(4):
already powering on
[ 591.688479] PM: early resume of devices complete after 0.178 msecs
[ 591.692195] usb usb3: root hub lost power or was reset
[ 591.692334] usb usb4: root hub lost power or was reset
[ 591.692595] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 591.692834] usb usb5: root hub lost power or was reset
[ 591.692969] usb usb6: root hub lost power or was reset
[ 591.693107] usb usb7: root hub lost power or was reset
[ 591.696197] sd 2:0:0:0: [sda] Starting disk
[ 591.796051] pciehp 0000:00:1c.5:pcie04: Device 0000:03:00.0 already exists
at 0000:03:00, cannot hot-add
[ 591.796055] pciehp 0000:00:1c.5:pcie04: Cannot add device at 0000:03:00
[ 591.796074] pciehp 0000:00:1c.4:pcie04: Device 0000:02:00.0 already exists
at 0000:02:00, cannot hot-add
[ 591.796077] pciehp 0000:00:1c.4:pcie04: Cannot add device at 0000:02:00
[ 591.904049] pciehp 0000:00:1c.5:pcie04: Device 0000:03:00.0 already exists
at 0000:03:00, cannot hot-add
[ 591.904052] pciehp 0000:00:1c.5:pcie04: Cannot add device at 0000:03:00
[ 591.904057] pciehp 0000:00:1c.4:pcie04: Device 0000:02:00.0 already exists
at 0000:02:00, cannot hot-add
[ 591.904061] pciehp 0000:00:1c.4:pcie04: Cannot add device at 0000:02:00
[ 591.968420] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered
out
[ 591.968422] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered
out
[ 591.984287] ata1.00: configured for UDMA/33
[ 592.024063] usb 3-1: reset full-speed USB device number 3 using uhci_hcd
[ 592.172057] usb 7-1: reset low-speed USB device number 2 using uhci_hcd
[ 592.248073] firewire_core 0000:04:03.0: rediscovered device fw0
[ 592.572061] usb 7-2: reset full-speed USB device number 3 using uhci_hcd
[ 592.737073] appletouch 7-2:1.1: Geyser mode initialized.
[ 592.924061] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 593.040439] PM: resume of devices complete after 1351.956 msecs
[ 593.040805] PM: Finishing wakeup.
[ 593.040806] Restarting tasks ...
[ 593.042203] wlan0: authenticate with 6c:b0:ce:b0:38:4a
[ 593.048185] wlan0: send auth to 6c:b0:ce:b0:38:4a (try 1/3)
[ 593.050322] wlan0: authenticated
[ 593.052090] wlan0: associate with 6c:b0:ce:b0:38:4a (try 1/3)
[ 593.053873] cfg80211: World regulatory domain updated:
[ 593.053877] cfg80211: DFS Master region: unset
[ 593.053879] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 593.053882] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 593.053884] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 593.053886] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm), (N/A)
[ 593.053889] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 593.053892] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 593.053895] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[ 593.053897] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 593.053899] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 593.053972] usb 3-1: USB disconnect, device number 3
[ 593.054687] wlan0: RX AssocResp from 6c:b0:ce:b0:38:4a (capab=0x411 status=0
aid=2)
[ 593.055173] wlan0: associated
[ 593.068156] done.
[ 593.452286] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered
out
[ 593.452291] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered
out
[ 593.460433] ata3.00: configured for UDMA/133
[ 593.692184] usb 3-1: new full-speed USB device number 4 using uhci_hcd
[ 593.879222] usb 3-1: New USB device found, idVendor=05ac, idProduct=1000
[ 593.879234] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 593.957974] [UFW BLOCK] IN=wlan0 OUT= MAC=
SRC=fe80:0000:0000:0000:0223:12ff:fe04:6b69
DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=0
PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 593.968146] [UFW BLOCK] IN=wlan0 OUT= MAC=
SRC=fe80:0000:0000:0000:0223:12ff:fe04:6b69
DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=0
PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 594.467202] usb 3-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0
len 0 ret -84
[ 594.533654] input: HID 05ac:1000 as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/0003:05AC:1000.0004/input/input14
[ 594.533842] hid-generic 0003:05AC:1000.0004: input,hidraw3: USB HID v1.11
Keyboard [HID 05ac:1000] on usb-0000:00:1a.0-1/input0
[ 594.534105] input: HID 05ac:1000 as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/0003:05AC:1000.0005/input/input15
[ 594.534238] hid-generic 0003:05AC:1000.0005: input,hidraw4: USB HID v1.11
Mouse [HID 05ac:1000] on usb-0000:00:1a.0-1/input1
[ 594.604125] usb 3-1: USB disconnect, device number 4
[ 594.932200] usb 3-1: new full-speed USB device number 5 using uhci_hcd
[ 595.150175] usb 3-1: New USB device found, idVendor=05ac, idProduct=8205
[ 595.150187] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
------
I also opened a bug request here:
https://bugzilla.kernel.org/show_bug.cgi?id=111621
and the said to ask to you:"You probably should file the bug to debian and
tell them the upstream kernel works while the distro kernel doesn't."
I hope it can be fixed.
All the best, Ricca
--- End Message ---
