Package: src:linux
Version: 3.16.7-ckt25-1
Followup-For: Bug #820182
Hey there,
just had the same problem on scrolling through a LibreOffice Writer docuement
containing graphics (GDI MetaFile). It does not occur if I change the cursor's
position, but only when scrolling with the mouse reel or by dragging the
scrolling bar on the right side of the window.
Cheers,
Björn
-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version
4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt25-1 (2016-03-06)
** Command line:
BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/bs--desktop--lvm-root ro
quiet
** Not tainted
** Kernel log:
[ 33.639075] cfg80211: World regulatory domain updated:
[ 33.639079] cfg80211: DFS Master region: unset
[ 33.639080] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 33.639083] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 33.639085] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 33.639087] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm), (N/A)
[ 33.639090] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 33.639092] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 33.639094] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[ 33.639096] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 33.639098] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 34.279253] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 34.380147] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 34.380286] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 37.602113] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
Rx/Tx
[ 37.602158] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 4676.859450] PM: Syncing filesystems ... done.
[ 4676.987917] PM: Preparing system for mem sleep
[ 4677.169979] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 4677.171438] Freezing remaining freezable tasks ... (elapsed 0.001 seconds)
done.
[ 4677.172604] PM: Entering mem sleep
[ 4677.172649] Suspending console(s) (use no_console_suspend to debug)
[ 4677.173473] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 4677.173681] sd 0:0:0:0: [sda] Stopping disk
[ 4678.032171] PM: suspend of devices complete after 859.406 msecs
[ 4678.032427] PM: late suspend of devices complete after 0.252 msecs
[ 4678.032815] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 4678.032878] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 4678.032903] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[ 4678.048062] PM: noirq suspend of devices complete after 15.630 msecs
[ 4678.048366] ACPI: Preparing to enter system sleep state S3
[ 4678.049190] PM: Saving platform NVS memory
[ 4678.049564] Disabling non-boot CPUs ...
[ 4678.049617] intel_pstate CPU 1 exiting
[ 4678.050883] kvm: disabling virtualization on CPU1
[ 4678.152050] smpboot: CPU 1 is now offline
[ 4678.152408] intel_pstate CPU 2 exiting
[ 4678.153694] kvm: disabling virtualization on CPU2
[ 4678.256017] smpboot: CPU 2 is now offline
[ 4678.256448] intel_pstate CPU 3 exiting
[ 4678.257754] kvm: disabling virtualization on CPU3
[ 4678.360021] smpboot: CPU 3 is now offline
[ 4678.360168] ACPI: Low-level resume complete
[ 4678.360168] PM: Restoring platform NVS memory
[ 4678.360168] Enabling non-boot CPUs ...
[ 4678.360168] x86: Booting SMP configuration:
[ 4678.360168] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 4678.050885] kvm: enabling virtualization on CPU1
[ 4678.371700] Intel pstate controlling: cpu 1
[ 4678.371745] CPU1 is up
[ 4678.371798] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 4678.153697] kvm: enabling virtualization on CPU2
[ 4678.383046] Intel pstate controlling: cpu 2
[ 4678.383085] CPU2 is up
[ 4678.383140] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 4678.257758] kvm: enabling virtualization on CPU3
[ 4678.394396] Intel pstate controlling: cpu 3
[ 4678.394435] CPU3 is up
[ 4678.397045] ACPI: Waking up from system sleep state S3
[ 4678.412173] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 4678.412277] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 4678.412458] PM: noirq resume of devices complete after 14.697 msecs
[ 4678.412713] PM: early resume of devices complete after 0.172 msecs
[ 4678.412794] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[ 4678.412813] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 4678.413011] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 4678.413571] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[ 4678.421384] [drm] enabling PCIE gen 2 link speeds, disable with
radeon.pcie_gen2=0
[ 4678.425363] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[ 4678.425454] radeon 0000:01:00.0: WB enabled
[ 4678.425456] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr
0x0000000040000c00 and cpu addr 0xffff8800b9fc1c00
[ 4678.425457] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr
0x0000000040000c0c and cpu addr 0xffff8800b9fc1c0c
[ 4678.426903] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr
0x0000000000072118 and cpu addr 0xffffc90010bb2118
[ 4678.428522] sd 0:0:0:0: [sda] Starting disk
[ 4678.443116] [drm] ring test on 0 succeeded in 3 usecs
[ 4678.443126] [drm] ring test on 3 succeeded in 6 usecs
[ 4678.597575] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 4678.629155] [drm] ring test on 5 succeeded in 2 usecs
[ 4678.629163] [drm] UVD initialized successfully.
[ 4678.629276] [drm] ib test on ring 0 succeeded in 0 usecs
[ 4678.629353] [drm] ib test on ring 3 succeeded in 0 usecs
[ 4678.756036] ata4: SATA link down (SStatus 0 SControl 300)
[ 4678.772062] ata3: SATA link down (SStatus 0 SControl 300)
[ 4678.772087] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4678.773230] ata2.00: configured for UDMA/100
[ 4678.780543] [drm] ib test on ring 5 succeeded
[ 4678.835168] PM: resume of devices complete after 422.451 msecs
[ 4678.835399] PM: Finishing wakeup.
[ 4678.835401] Restarting tasks ... done.
[ 4679.087975] e1000e: eth0 NIC Link is Down
[ 4679.088317] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4683.812126] ata1: link is slow to respond, please be patient (ready=0)
[ 4688.460064] ata1: COMRESET failed (errno=-16)
[ 4688.960118] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4689.113823] ata1.00: configured for UDMA/133
[ 4689.422971] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 4689.524143] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 4689.524283] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4692.810168] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
Rx/Tx
[ 4692.810213] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
** Model information
sys_vendor: Acer
product_name: Aspire X3960
product_version:
chassis_vendor: Acer
chassis_version:
bios_vendor: American Megatrends Inc.
bios_version: P01-A4
board_vendor: Acer
board_name: Aspire X3960
board_version:
** Loaded modules:
cfg80211
bnep
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
ecb
joydev
radeon
btusb
bluetooth
6lowpan_iphc
ttm
drm_kms_helper
drm
snd_hda_codec_realtek
evdev
rfkill
snd_hda_codec_hdmi
snd_hda_codec_generic
iTCO_wdt
iTCO_vendor_support
mxm_wmi
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
snd_hda_intel
snd_hda_controller
coretemp
i2c_algo_bit
kvm_intel
snd_hda_codec
i2c_i801
snd_hwdep
kvm
snd_pcm
snd_timer
snd
i2c_core
soundcore
mei_me
mei
lpc_ich
mfd_core
shpchp
pcspkr
serio_raw
processor
thermal_sys
button
wmi
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
xts
gf128mul
algif_skcipher
af_alg
hid_generic
usbhid
hid
dm_crypt
dm_mod
usb_storage
sg
sd_mod
sr_mod
crc_t10dif
crct10dif_generic
cdrom
crct10dif_pclmul
crct10dif_common
crc32_pclmul
crc32c_intel
ahci
libahci
ehci_pci
ehci_hcd
cryptd
libata
psmouse
scsi_mod
e1000e
usbcore
ptp
usb_common
pps_core
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor
Family DRAM Controller [8086:0100] (rev 09)
Subsystem: Acer Incorporated [ALI] Device [1025:0492]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: snb_uncore
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core
Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fe600000-fe6fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series
Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Acer Incorporated [ALI] Device [1025:0492]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at fe729000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:19.0 Ethernet controller [0200]: Intel Corporation 82579V Gigabit Network
Connection [8086:1503] (rev 05)
Subsystem: Acer Incorporated [ALI] Device [1025:8000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at fe700000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fe728000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f040 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0492]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe727000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset
Family High Definition Audio Controller [8086:1c20] (rev 05)
Subsystem: Acer Incorporated [ALI] Device [1025:0492]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fe720000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0492]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe726000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation H67 Express Chipset Family LPC
Controller [8086:1c4a] (rev 05)
Subsystem: Acer Incorporated [ALI] Device [1025:0492]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset
Family SATA AHCI Controller [8086:1c02] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Acer Incorporated [ALI] Device [1025:0492]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at f090 [size=8]
Region 1: I/O ports at f080 [size=4]
Region 2: I/O ports at f070 [size=8]
Region 3: I/O ports at f060 [size=4]
Region 4: I/O ports at f020 [size=32]
Region 5: Memory at fe725000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family
SMBus Controller [8086:1c22] (rev 05)
Subsystem: Acer Incorporated [ALI] Device [1025:0492]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe724000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f000 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Caicos [Radeon HD 6450/7450/8450 / R5 230 OEM] [1002:6779] (prog-if
00 [VGA controller])
Subsystem: PC Partner Limited / Sapphire Technology Radeon HD 6450
[174b:e153]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fe620000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at e000 [size=256]
Expansion ROM at fe600000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Caicos HDMI
Audio [Radeon HD 6400 Series] [1002:aa98]
Subsystem: PC Partner Limited / Sapphire Technology Radeon HD 6450 1GB
DDR3 [174b:aa98]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 45
Region 0: Memory at fe640000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
** USB devices:
Bus 002 Device 005: ID 046d:c050 Logitech, Inc. RX 250 Optical Mouse
Bus 002 Device 004: ID 04ca:0050 Lite-On Technology Corp.
Bus 002 Device 003: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle
(HCI mode)
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 058f:6361 Alcor Micro Corp. Multimedia Card Reader
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 8.4
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.120+deb8u1
ii kmod 18-3
ii linux-base 3.5
Versions of packages linux-image-3.16.0-4-amd64 recommends:
pn firmware-linux-free <none>
pn irqbalance <none>
Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-22+deb8u1
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information excluded
