Package: src:linux
Version: 4.4.6-1~bpo8+1
Severity: important
Dear Maintainer,
After kernel upgrade, changing brightness takes some seconds and causes system
slowdown if i try to change more than one level at a time. This problem does
not happen in the other kernel packages i have installed(3.16, 4.3). I'm using
Gnome desktop, the problem happens when i try the change through the menu at
the top bar and especially if i try using fn keys to do it. If a hold fn+f5 or
f6 all the way to minimum or maximum, the action causes severe slowdown in the
system making it unusable for some time. I have theses modules installed in all
the kernel packages as can be seen below the result of "dkms status" command.
bbswitch, 0.8, 3.16.0-4-amd64, x86_64: installed
bbswitch, 0.8, 4.3.0-0.bpo.1-amd64, x86_64: installed
bbswitch, 0.8, 4.4.0-0.bpo.1-amd64, x86_64: installed
nvidia-current, 352.79, 3.16.0-4-amd64, x86_64: installed
nvidia-current, 352.79, 4.3.0-0.bpo.1-amd64, x86_64: installed
nvidia-current, 352.79, 4.4.0-0.bpo.1-amd64, x86_64: installed
virtualbox, 5.0.16, 3.16.0-4-amd64, x86_64: installed
virtualbox, 5.0.16, 4.3.0-0.bpo.1-amd64, x86_64: installed
virtualbox, 5.0.16, 4.4.0-0.bpo.1-amd64, x86_64: installed
-- Package-specific info:
** Version:
Linux version 4.4.0-0.bpo.1-amd64 (debian-kernel@lists.debian.org) (gcc version
4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.4.6-1~bpo8+1 (2016-03-20)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.4.0-0.bpo.1-amd64
root=UUID=34333935-6a2e-401e-8284-fbd915a5c247 ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 3.046002] [drm:cpt_irq_handler [i915]] *ERROR* PCH transcoder A FIFO
underrun
[ 3.088769] clocksource: Switched to clocksource tsc
[ 3.290615] Adding 11718652k swap on /dev/sda2. Priority:-1 extents:1
across:11718652k FS
[ 3.339649] uvcvideo: Found UVC 1.00 device USB Camera (13d3:5165)
[ 3.350828] input: USB Camera as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input18
[ 3.350904] usbcore: registered new interface driver uvcvideo
[ 3.350904] USB Video Class driver (1.1.1)
[ 3.572536] pstore: Registered efi as persistent store backend
[ 3.587952] Console: switching to colour frame buffer device 170x48
[ 3.590360] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.601464] intel_rapl: Found RAPL domain package
[ 3.601467] intel_rapl: Found RAPL domain core
[ 3.601468] intel_rapl: Found RAPL domain uncore
[ 3.691816] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[ 3.710231] psmouse serio4: elantech: assuming hardware version 4 (with
firmware version 0x361f01)
[ 3.723702] psmouse serio4: elantech: Synaptics capabilities query result
0x00, 0x15, 0x0c.
[ 3.737244] psmouse serio4: elantech: Elan sample query result 03, 23, 75
[ 3.805084] input: ETPS/2 Elantech Touchpad as
/devices/platform/i8042/serio4/input/input12
[ 3.969421] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
(null)
[ 4.014334] systemd-journald[209]: Received request to flush runtime journal
from PID 1
[ 4.015494] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.023753] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 4.033615] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.133437] RPC: Registered named UNIX socket transport module.
[ 4.133441] RPC: Registered udp transport module.
[ 4.133442] RPC: Registered tcp transport module.
[ 4.133443] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.136723] FS-Cache: Loaded
[ 4.143627] FS-Cache: Netfs 'nfs' registered for caching
[ 4.150812] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 4.227984] vboxdrv: Found 4 processor cores
[ 4.230014] bbswitch: version 0.8
[ 4.230022] bbswitch: Found integrated VGA device 0000:00:02.0:
\_SB_.PCI0.GFX0
[ 4.230028] bbswitch: Found discrete VGA device 0000:01:00.0:
\_SB_.PCI0.PEG0.PEGP
[ 4.230040] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 4.230149] bbswitch: detected an Optimus _DSM function
[ 4.230161] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 4.232850] bbswitch: disabling discrete graphics
[ 4.232864] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 4.243924] vboxdrv: TSC mode is Invariant, tentative frequency 1696141449 Hz
[ 4.243927] vboxdrv: Successfully loaded version 5.0.16_Debian (interface
0x00240000)
[ 4.251583] VBoxNetFlt: Successfully started.
[ 4.259276] VBoxNetAdp: Successfully started.
[ 4.267229] VBoxPciLinuxInit
[ 4.270773] vboxpci: IOMMU not found (not registered)
[ 4.453681] r8169 0000:04:00.2: firmware: direct-loading firmware
rtl_nic/rtl8411-1.fw
[ 4.542816] r8169 0000:04:00.2 eth0: link down
[ 5.621495] wlan0: authenticate with f8:d1:11:8f:cb:72
[ 5.636127] wlan0: send auth to f8:d1:11:8f:cb:72 (try 1/3)
[ 5.638508] wlan0: authenticated
[ 5.639750] wlan0: associate with f8:d1:11:8f:cb:72 (try 1/3)
[ 5.642909] wlan0: RX AssocResp from f8:d1:11:8f:cb:72 (capab=0x431 status=0
aid=4)
[ 5.643017] wlan0: associated
[ 5.645455] ath: EEPROM regdomain: 0x8348
[ 5.645458] ath: EEPROM indicates we should expect a country code
[ 5.645459] ath: doing EEPROM country->regdmn map search
[ 5.645460] ath: country maps to regdmn code: 0x3a
[ 5.645461] ath: Country alpha2 being used: US
[ 5.645462] ath: Regpair used: 0x3a
[ 5.645463] ath: regdomain 0x8348 dynamically updated by country IE
[ 5.645485] cfg80211: Regulatory domain changed to country: US
[ 5.645486] cfg80211: DFS Master region: FCC
[ 5.645488] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 5.645490] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000
mBm), (N/A)
[ 5.645491] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 1700 mBm), (N/A)
[ 5.645493] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2300 mBm), (0 s)
[ 5.645495] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000
mBm), (N/A)
[ 5.645496] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A,
4000 mBm), (N/A)
[ 20.244336] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.244339] Bluetooth: BNEP filters: protocol multicast
[ 20.244343] Bluetooth: BNEP socket layer initialized
[ 21.902234] usb 3-1.1: USB disconnect, device number 3
[ 22.064227] [UFW BLOCK] IN=wlan0 OUT= MAC=
SRC=fe80:0000:0000:0000:5ec9:d3ff:fe44:ea0c
DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1
FLOWLBL=679065 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 22.074409] [UFW BLOCK] IN=wlan0 OUT= MAC=
SRC=fe80:0000:0000:0000:5ec9:d3ff:fe44:ea0c
DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1
FLOWLBL=679065 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 48.330313] [UFW BLOCK] IN=wlan0 OUT=
MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1
LEN=32 TOS=0x10 PREC=0x20 TTL=1 ID=0 PROTO=2
[ 173.356844] [UFW BLOCK] IN=wlan0 OUT=
MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1
LEN=32 TOS=0x1C PREC=0xA0 TTL=1 ID=0 PROTO=2
[ 298.383089] [UFW BLOCK] IN=wlan0 OUT=
MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1
LEN=32 TOS=0x18 PREC=0x20 TTL=1 ID=0 PROTO=2
[ 419.213153] [UFW BLOCK] IN=wlan0 OUT=
MAC=5c:c9:d3:44:ea:0c:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=192.168.0.105
LEN=372 TOS=0x00 PREC=0x00 TTL=64 ID=32395 PROTO=UDP SPT=1901 DPT=48544 LEN=352
[ 421.178184] [UFW BLOCK] IN=wlan0 OUT=
MAC=5c:c9:d3:44:ea:0c:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=192.168.0.105
LEN=360 TOS=0x00 PREC=0x00 TTL=64 ID=32396 PROTO=UDP SPT=1901 DPT=48544 LEN=340
[ 423.306973] [UFW BLOCK] IN=wlan0 OUT=
MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1
LEN=32 TOS=0x10 PREC=0x40 TTL=1 ID=0 PROTO=2
[ 425.183491] [UFW BLOCK] IN=wlan0 OUT=
MAC=5c:c9:d3:44:ea:0c:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=192.168.0.105
LEN=300 TOS=0x00 PREC=0x00 TTL=64 ID=32397 PROTO=UDP SPT=1901 DPT=48544 LEN=280
[ 425.256544] [UFW BLOCK] IN=wlan0 OUT=
MAC=5c:c9:d3:44:ea:0c:24:4b:03:6a:ab:ec:08:00 SRC=192.168.0.104
DST=192.168.0.105 LEN=315 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=41776
DPT=48544 LEN=295
[ 425.256626] [UFW BLOCK] IN=wlan0 OUT=
MAC=5c:c9:d3:44:ea:0c:24:4b:03:6a:ab:ec:08:00 SRC=192.168.0.104
DST=192.168.0.105 LEN=315 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=33132
DPT=48544 LEN=295
[ 425.256673] [UFW BLOCK] IN=wlan0 OUT=
MAC=5c:c9:d3:44:ea:0c:24:4b:03:6a:ab:ec:08:00 SRC=192.168.0.104
DST=192.168.0.105 LEN=314 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=60744
DPT=48544 LEN=294
[ 427.302101] [UFW BLOCK] IN=wlan0 OUT=
MAC=5c:c9:d3:44:ea:0c:00:25:11:b4:9c:68:08:00 SRC=192.168.0.107
DST=192.168.0.105 LEN=425 TOS=0x00 PREC=0x00 TTL=128 ID=20353 PROTO=UDP
SPT=1900 DPT=48544 LEN=405
[ 548.333175] [UFW BLOCK] IN=wlan0 OUT=
MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1
LEN=32 TOS=0x10 PREC=0xA0 TTL=1 ID=0 PROTO=2
[ 673.359365] [UFW BLOCK] IN=wlan0 OUT=
MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1
LEN=32 TOS=0x1C PREC=0xA0 TTL=1 ID=0 PROTO=2
[ 798.283261] [UFW BLOCK] IN=wlan0 OUT=
MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1
LEN=32 TOS=0x18 PREC=0x20 TTL=1 ID=0 PROTO=2
[ 923.309432] [UFW BLOCK] IN=wlan0 OUT=
MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1
LEN=32 TOS=0x1C PREC=0xE0 TTL=1 ID=0 PROTO=2
[ 1048.335534] [UFW BLOCK] IN=wlan0 OUT=
MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1
LEN=32 TOS=0x18 PREC=0x20 TTL=1 ID=0 PROTO=2
[ 1173.259279] [UFW BLOCK] IN=wlan0 OUT=
MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1298.285434] [UFW BLOCK] IN=wlan0 OUT=
MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1
LEN=32 TOS=0x18 PREC=0x20 TTL=1 ID=0 PROTO=2
[ 1336.377008] nf_conntrack: automatic helper assignment is deprecated and it
will be removed soon. Use the iptables CT target to attach helpers instead.
[ 1423.311849] [UFW BLOCK] IN=wlan0 OUT=
MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1
LEN=32 TOS=0x1C PREC=0xA0 TTL=1 ID=0 PROTO=2
[ 1548.337620] [UFW BLOCK] IN=wlan0 OUT=
MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1
LEN=32 TOS=0x00 PREC=0xE0 TTL=1 ID=0 PROTO=2
[ 1673.261412] [UFW BLOCK] IN=wlan0 OUT=
MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1
LEN=32 TOS=0x1C PREC=0xA0 TTL=1 ID=0 PROTO=2
[ 1798.287540] [UFW BLOCK] IN=wlan0 OUT=
MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1
LEN=32 TOS=0x18 PREC=0x20 TTL=1 ID=0 PROTO=2
[ 1923.313596] [UFW BLOCK] IN=wlan0 OUT=
MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1
LEN=32 TOS=0x1C PREC=0xA0 TTL=1 ID=0 PROTO=2
[ 2048.237454] [UFW BLOCK] IN=wlan0 OUT=
MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1
LEN=32 TOS=0x08 PREC=0xE0 TTL=1 ID=0 PROTO=2
[ 2173.263460] [UFW BLOCK] IN=wlan0 OUT=
MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1
LEN=32 TOS=0x1C PREC=0xE0 TTL=1 ID=0 PROTO=2
** Model information
sys_vendor: ASUSTeK COMPUTER INC.
product_name: K46CB
product_version: 1.0
chassis_vendor: ASUSTeK COMPUTER INC.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: K46CB.207
board_vendor: ASUSTeK COMPUTER INC.
board_name: K46CB
board_version: 1.0
** Loaded modules:
bnep
ctr
ccm
binfmt_misc
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
bbswitch(O)
vboxdrv(O)
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
grace
fscache
sunrpc
ip6t_REJECT
nf_reject_ipv6
nf_log_ipv6
xt_hl
ip6t_rt
nf_conntrack_ipv6
nf_defrag_ipv6
ipt_REJECT
nf_reject_ipv4
nf_log_ipv4
nf_log_common
xt_LOG
xt_limit
xt_tcpudp
xt_addrtype
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
ip6table_filter
ip6_tables
nf_conntrack_netbios_ns
nf_conntrack_broadcast
nf_nat_ftp
nf_nat
nf_conntrack_ftp
nf_conntrack
iptable_filter
ip_tables
x_tables
joydev
nls_utf8
nls_cp437
vfat
fat
intel_rapl
iosf_mbi
x86_pkg_temp_thermal
intel_powerclamp
coretemp
kvm_intel
kvm
irqbypass
crct10dif_pclmul
uvcvideo
crc32_pclmul
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
videobuf2_core
v4l2_common
videodev
sha256_ssse3
sha256_generic
asus_nb_wmi
media
hmac
iTCO_wdt
asus_wmi
drbg
sparse_keymap
mxm_wmi
iTCO_vendor_support
ansi_cprng
efi_pstore
snd_hda_codec_hdmi
arc4
snd_hda_codec_realtek
snd_hda_codec_generic
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
ath9k
ath9k_common
pcspkr
ath9k_hw
ath3k
evdev
ath
btusb
btrtl
btbcm
btintel
efivars
mac80211
psmouse
serio_raw
bluetooth
i915
snd_hda_intel
i2c_i801
snd_hda_codec
snd_hda_core
cfg80211
snd_hwdep
rtsx_pci_ms
snd_pcm
drm_kms_helper
snd_timer
rfkill
memstick
drm
snd
lpc_ich
mei_me
soundcore
i2c_algo_bit
mei
shpchp
int3403_thermal
wmi
int3402_thermal
int3400_thermal
battery
ac
int340x_thermal_zone
video
acpi_thermal_rel
tpm_tis
tpm
button
processor
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sg
sr_mod
cdrom
sd_mod
rtsx_pci_sdmmc
mmc_core
ahci
crc32c_intel
libahci
libata
scsi_mod
ehci_pci
xhci_pci
ehci_hcd
xhci_hcd
r8169
rtsx_pci
mii
mfd_core
usbcore
usb_common
thermal
fan
fjes
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM
Controller [8086:0154] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:100d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: ivb_uncore
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core
processor PCI Express Root Port [8086:0151] (rev 09) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f6000000-f70fffff
Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core
processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:100d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 33
Region 0: Memory at f7400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:04.0 Signal processing controller [1180]: Intel Corporation 3rd Gen Core
Processor Thermal Subsystem [8086:0153] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:100d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at cfe08000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:100d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f7a00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series
Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:100d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 31
Region 0: Memory at f7a22000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:100d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7a20000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset
Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:100d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 32
Region 0: Memory at f7a18000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f7900000-f79fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7800000-f78fffff
Prefetchable memory behind bridge: 00000000f2100000-00000000f21fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:100d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7a1f000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC
Controller [8086:1e59] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:100d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family
6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:100d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 30
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7a1e000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family
SMBus Controller [8086:1e22] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:100d]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 0
Region 0: Memory at f7a1d000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
01:00.0 3D controller [0302]: NVIDIA Corporation GK107M [GeForce GT 740M]
[10de:0fdf] (rev ff) (prog-if ff)
!!! Unknown header type 7f
03:00.0 Network controller [0280]: Qualcomm Atheros AR9485 Wireless Network
Adapter [168c:0032] (rev 01)
Subsystem: Lite-On Communications Inc Device [11ad:6628]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f7900000 (64-bit, non-prefetchable) [size=512K]
Expansion ROM at f7980000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device
[10ec:5289] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:202f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 27
Region 0: Memory at f7800000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
04:00.2 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0a)
Subsystem: ASUSTeK Computer Inc. Device [1043:200f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at f2104000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f2100000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 13d3:5165 IMC Networks
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 8.3
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.4.0-0.bpo.1-amd64 (SMP w/4 CPU cores)
Locale: LANG=pt_BR.utf8, LC_CTYPE=pt_BR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.4.0-0.bpo.1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 18-3
ii linux-base 3.5
Versions of packages linux-image-4.4.0-0.bpo.1-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
Versions of packages linux-image-4.4.0-0.bpo.1-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | grub-efi | extlinux <none>
pn linux-doc-4.4 <none>
Versions of packages linux-image-4.4.0-0.bpo.1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 20160110-1~bpo8+1
pn xen-hypervisor <none>
-- debconf information:
linux-image-4.4.0-0.bpo.1-amd64/prerm/removing-running-kernel-4.4.0-0.bpo.1-amd64:
true
