Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top
... Begin: Assembling all MD arrays ... [ 27.644304] md: md0 stopped.
[ 27.648269] md: bind<sdl1>
[ 27.651500] md: bind<sdd1>
[ 27.654540] md: kicking non-fresh sdl1 from array!
[ 27.659898] md: unbind<sdl1>
[ 27.673167] md: export_rdev(sdl1)
[ 27.679548] md: raid1 personality registered for level 1
[ 27.687179] md/raid1:md0: active with 1 out of 2 mirrors
[ 27.693133] md0: detected capacity change from 0 to 1000194564096
mdadm: /dev/md0 has been started with 1 drive (out of 2).
[ 27.717110] md: md1 stopped.
[ 27.721089] md: bind<sdm1>
[ 27.724269] md: bind<sde1>
[ 27.728351] md/raid1:md1: not clean -- starting background reconstruction
[ 27.735933] md/raid1:md1: active with 2 out of 2 mirrors
[ 27.741938] md1: detected capacity change from 0 to 1000194564096
mdadm: /dev/md1 has been started with 2 drives.
[ 27.786564] md: md2 stopped.
[ 27.790557] md: bind<sdn1>
[ 27.793866] md: bind<sdf1>
[ 27.798099] md/raid1:md2: not clean -- starting background reconstruction
[ 27.805684] md/raid1:md2: active with 2 out of 2 mirrors
[ 27.811633] md2: detected capacity change from 0 to 1000194564096
mdadm: /dev/md2 has been started with 2 drives.
[ 27.831252] md: md3 stopped.
[ 27.835305] md: bind<sdo1>
[ 27.838554] md: bind<sdg1>
[ 27.842781] md/raid1:md3: not clean -- starting background reconstruction
[ 27.850364] md/raid1:md3: active with 2 out of 2 mirrors
[ 27.856378] md3: detected capacity change from 0 to 1000194564096
mdadm: /dev/md3 has been started with 2 drives.
[ 27.876061] md: md4 stopped.
[ 27.893339] md: bind<sdp1>
[ 27.905378] md: bind<sdh1>
[ 27.909518] md/raid1:md4: active with 2 out of 2 mirrors
[ 27.915474] md4: detected capacity change from 0 to 1000194564096
mdadm: /dev/md4 has been started with 2 drives.
[ 27.933352] md: md5 stopped.
[ 27.937295] md: bind<sdq1>
[ 27.940619] md: bind<sdi1>
[ 27.944469] md/raid1:md5: not clean -- starting background reconstruction
[ 27.952052] md/raid1:md5: active with 2 out of 2 mirrors
[ 27.958060] md5: detected capacity change from 0 to 1000194564096
mdadm: /dev/md5 has been started with 2 drives.
[ 27.986251] md: md6 stopped.
[ 27.990196] md: bind<sdr1>
[ 27.993433] md: bind<sdj1>
[ 27.997834] md/raid1:md6: not clean -- starting background reconstruction
[ 28.005419] md/raid1:md6: active with 2 out of 2 mirrors
[ 28.011424] md6: detected capacity change from 0 to 1000194564096
mdadm: /dev/md6 has been started with 2 drives.
[ 28.029640] md: md7 stopped.
[ 28.034126] md: bind<sds1>
[ 28.037505] md: bind<sdk1>
[ 28.041956] md/raid1:md7: active with 2 out of 2 mirrors
[ 28.047923] md7: detected capacity change from 0 to 1000194564096
mdadm: /dev/md7 has been started with 2 drives.
Success: assembled all arrays.
done.
[ 28.079083] device-mapper: uevent: version 1.0.3
[ 28.084686] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18)
initialised: dm-de...@redhat.com
done.
Begin: Running /scripts/local-premount ... [ 28.385157] raid6: sse2x1
gen() 6558 MB/s
[ 28.457152] raid6: sse2x1 xor() 5107 MB/s
[ 28.529149] raid6: sse2x2 gen() 7777 MB/s
[ 28.601149] raid6: sse2x2 xor() 6006 MB/s
[ 28.673143] raid6: sse2x4 gen() 8514 MB/s
[ 28.745142] raid6: sse2x4 xor() 6671 MB/s
[ 28.749948] raid6: using algorithm sse2x4 gen() 8514 MB/s
[ 28.756012] raid6: .... xor() 6671 MB/s, rmw enabled
[ 28.761593] raid6: using ssse3x2 recovery algorithm
[ 28.769957] xor: measuring software checksum speed
[ 28.813072] prefetch64-sse: 11380.000 MB/sec
[ 28.857072] generic_sse: 10003.000 MB/sec
[ 28.861834] xor: using function: prefetch64-sse (11380.000 MB/sec)
[ 28.877195] Btrfs loaded
Scanning for Btrfs filesystems
done.
Begin: Checking root file system ... fsck from util-linux 2.25.2
/dev/mapper/lvm0--vol-root: clean, 77054/983040 files, 1751357/3932160
blocks
[ 29.489424] md: resync of RAID array md1
[ 29.493807] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 29.500306] md: using maximum available idle IO bandwidth (but not
more than 200000 KB/sec) for resync.
[ 29.510793] md: using 128k window, over a total of 976752504k.
[ 29.516392] md: resync of RAID array md2
[ 29.516393] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 29.516394] md: using maximum available idle IO bandwidth (but not
more than 200000 KB/sec) for resync.
[ 29.516397] md: using 128k window, over a total of 976752504k.
[ 29.516397] md: resuming resync of md2 from checkpoint.
[ 29.544306] md: resync of RAID array md3
[ 29.544306] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 29.544307] md: using maximum available idle IO bandwidth (but not
more than 200000 KB/sec) for resync.
[ 29.544310] md: using 128k window, over a total of 976752504k.
[ 29.544310] md: resuming resync of md3 from checkpoint.
[ 29.573779] md: resync of RAID array md5
[ 29.573780] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 29.573780] md: using maximum available idle IO bandwidth (but not
more than 200000 KB/sec) for resync.
[ 29.573784] md: using 128k window, over a total of 976752504k.
[ 29.573784] md: resuming resync of md5 from checkpoint.
[ 29.599314] md: resync of RAID array md6
[ 29.599315] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 29.599315] md: using maximum available idle IO bandwidth (but not
more than 200000 KB/sec) for resync.
[ 29.599320] md: using 128k window, over a total of 976752504k.
[ 29.599320] md: resuming resync of md6 from checkpoint.
[ 29.652105] md: resuming resync of md1 from checkpoint.
done.
[ 29.671608] EXT4-fs (dm-0): mounted filesystem with ordered data
mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
[....] Starting the hotplug events dispatcher: udevd[ 33.243294]
systemd-udevd[560]: starting version 215
. ok
[ ok ] Synthesizing the initial hotplug events...done.
[....] Waiting for /dev to be fully populated...[ 34.538951] shpchp:
Standard Hot Plug PCI Controller Driver version: 0.4
[ 34.564361] EDAC MC: Ver: 3.0.0
[ 34.574027] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 34.581000] igb 0000:01:00.0: DCA enabled
[ 34.585506] igb 0000:01:00.1: DCA enabled
[ 34.590481] igb 0000:03:00.0: DCA enabled
[ 34.594979] igb 0000:03:00.1: DCA enabled
[ 34.599882] igb 0000:06:00.0: DCA enabled
[ 34.604383] igb 0000:06:00.1: DCA enabled
[ 34.620940] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 34.630268] ACPI: Sleep Button [SLPB]
[ 34.634397] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 34.642652] ACPI: Power Button [PWRF]
[ 34.647229] EDAC MC0: Giving out device to module i7core_edac.c
controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
[ 34.658639] EDAC PCI0: Giving out device to module i7core_edac
controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[ 34.670939] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 34.714822] ipmi message handler version 39.2
[ 34.735761] ipmi_si IPI0001:00: ipmi_si: probing via ACPI
[ 34.741810] ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0
[ 34.749098] ipmi_si: Adding ACPI-specified kcs state machine
[ 34.755446] IPMI System Interface driver.
[ 34.759943] ipmi_si: probing via SMBIOS
[ 34.764225] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 34.770834] ipmi_si: Adding SMBIOS-specified kcs state machine
duplicate interface
[ 34.779298] ipmi_si: Trying ACPI-specified kcs state machine at i/o
address 0xca2, slave address 0x0, irq 0
[ 34.971061] ipmi_si IPI0001:00: Found new BMC (man_id: 0x000157,
prod_id: 0x003e, dev_id: 0x21)
[ 34.980789] ipmi_si IPI0001:00: IPMI kcs interface initialized
[ 35.006901] [drm] Initialized drm 1.1.0 20060810
[ 35.074439] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 35.082100] ACPI Warning: SystemIO range
0x0000000000000428-0x000000000000042F conflicts with OpRegion
0x0000000000000428-0x000000000000042F (\GPE0) (20150818/utaddress-254)
[ 35.099406] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 35.110780] ACPI Warning: SystemIO range
0x0000000000000500-0x000000000000052F conflicts with OpRegion
0x0000000000000500-0x000000000000052F (\_SI_.SIOR) (20150818/utaddress-254)
[ 35.128558] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 35.139989] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 35.167338] iTCO_vendor_support: vendor-support=0
[ 35.175988] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 35.182264] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled
by hardware/BIOS
[ 35.433020] SSE version of gcm_enc/dec engaged.
[ 35.498177] sha256_ssse3: Using SSSE3 optimized SHA-256 implementation
[ 35.815077] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work
properly. Using workaround
done.
[FAIL] RAID status not OK. Exiting. ... failed!
[ ok ] Generating udev events for MD arrays...done.
[ ok ] Activating swap...done.
[ 41.488229] EXT4-fs (dm-0): re-mounted. Opts: (null)
[....] Checking root file system...fsck from util-linux 2.25.2
e2fsck 1.42.12 (29-Aug-2014)
/dev/mapper/lvm0--vol-root: clean, 77054/983040 files, 1751357/3932160
blocks
done.
[ 41.888682] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ ok ] Cleaning up temporary files... /tmp.
[ ok ] Starting early crypto disks...done.
[ 43.113797] 8021q: 802.1Q VLAN Support v1.8
[ 43.140029] ipmi device interface
[ 43.207932] fuse init (API version 7.23)
[info] Loading kernel module 8021q.
[info] Loading kernel module ipmi_si.
[info] Loading kernel module ipmi_devintf.
[info] Loading kernel module fuse.
[ 45.513537] async_tx: api initialized (async)
[ 45.570620] md: raid6 personality registered for level 6
[ 45.576558] md: raid5 personality registered for level 5
[ 45.582517] md: raid4 personality registered for level 4
[ 45.627871] device-mapper: raid: Loading target version 1.7.0
[ 45.642884] md/raid1:mdX: active with 2 out of 2 mirrors
[ 45.648979] mdX: invalid bitmap file superblock: bad magic
[ 45.655123] mdX: failed to create bitmap (-22)
[ 45.660202] device-mapper: table: 251:7: raid: Fail to run raid array
[ 45.667396] device-mapper: ioctl: error adding target to table
[....] Setting up LVM Volume Groups... device-mapper: reload ioctl on
failed: Invalid argument
failed.
[ ok ] Starting remaining crypto disks...done.
[....] Activating lvm and md swap...[ 45.797818] Adding 524284k swap
on /dev/mapper/lvm0--vol-swap. Priority:-1 extents:1 across:524284k FS
done.
[....] Checking file systems...fsck from util-linux 2.25.2
e2fsck 1.42.12 (29-Aug-2014)
/dev/mapper/lvm0--vol-home: clean, 27/1310720 files, 126303/5242880 blocks
e2fsck 1.42.12 (29-Aug-2014)
fsck.ext4: No such file or directory while trying to open
/dev/lvm0-vol/storage
Possibly non-existent device?
fsck exited with status code 8
failed (code 8).
[FAIL] File system check failed. A log is being saved in
/var/log/fsck/checkfs if that location is writable. Please repair the
file system manually. ... failed!
[warn] A maintenance shell will now be started. CONTROL-D will terminate
this shell and resume system boot. ... (warning).
Give root password for maintenance
(or type Control-D to continue):
Login incorrect.
Give root password for maintenance
(or type Control-D to continue):
root@yadira:~# uname -a
Linux yadira 4.3.0-0.bpo.1-amd64 #1 SMP Debian 4.3.5-1~bpo8+1
(2016-02-23) x86_64 GNU/Linux
