Package: src:linux Version: 4.4.6-1 Severity: important Dear Maintainer,
Since the update to 4.4.0-1 i've been regularly encountering a problem where virtual consoles (available by pressing Ctrl + Alt + F1..6) "freeze up" after working in the X session for some time. Namely, one of two things happen: * Sometimes every virtual console shows no login prompt, but only an unmoving, unblinking cursor. This seems to only happen if I am not logged into any text console. * Sometimes the same image will show up for all consoles (no matter which one I switch to), which is a frozen image from one of them. This can happen whether I'm logged in on one of the ttys or not. The consoles then react to no input. I can switch back to the X session by pressing Ctrl+Alt+F7 and back to text consoles again. The X session continues to work normally, but usually there are various display glitches, like some windows not rendering properly. In one case all GTK+ programs stopped showing text (Qt programs continued to work). So far I've only established that it happens after about 20-30 minutes of actively working in the X session, but it isn't bound to any program in particular. I haven't seen it trigger while working in a virtual console, even if the X session is running, unless I first switch to the X session. This never happened under previous kernel versions I've used (4.1, 4.2, 4.3). Previous kernel versions were affected by another bug though [1], although it never caused any problems other than an error message and an occasional little display glitch. That bug no longer occurs for me under 4.4.0, but now this much more serious bug does. At this moment the bug has already been triggered. dmesg shows no messages other than what's attached. Although bbswitch is loaded, I haven't run any program with optirun/primusrun since reboot. [1] https://bugzilla.kernel.org/show_bug.cgi?id=95461 -- Package-specific info: ** Version: Linux version 4.4.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20160307 (Debian 5.3.1-11) ) #1 SMP Debian 4.4.6-1 (2016-03-17) ** Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-1-amd64 root=UUID=808626fe-93c8-4f70-a04f-e8e9922c2737 ro quiet splash ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [ 13.772072] ath: Regpair used: 0x60 [ 13.906499] intel_rapl: Found RAPL domain package [ 13.906501] intel_rapl: Found RAPL domain core [ 13.906503] intel_rapl: Found RAPL domain uncore [ 13.906512] intel_rapl: RAPL package 0 domain package locked by BIOS [ 14.021854] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no) [ 14.022672] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input14 [ 14.023744] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 14.028162] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15 [ 14.028256] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0 [ 14.028433] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\SMB0) (20150930/utaddress-254) [ 14.028438] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150930/utaddress-254) [ 14.028440] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.063700] input: PC Speaker as /devices/platform/pcspkr/input/input16 [ 14.099522] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 14.099614] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 14.147935] Console: switching to colour frame buffer device 170x48 [ 14.151023] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 14.151369] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90000c00000, irq=17 [ 14.152116] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 14.248528] iTCO_vendor_support: vendor-support=0 [ 14.261211] Bluetooth: Core ver 2.21 [ 14.261234] NET: Registered protocol family 31 [ 14.261236] Bluetooth: HCI device and connection manager initialized [ 14.261243] Bluetooth: HCI socket layer initialized [ 14.261247] Bluetooth: L2CAP socket layer initialized [ 14.261254] Bluetooth: SCO socket layer initialized [ 14.274123] asus_wmi: ASUS WMI generic driver loaded [ 14.276578] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 14.276642] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) [ 14.276790] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 14.278606] asus_wmi: Initialization: 0x1 [ 14.278668] asus_wmi: BIOS WMI version: 7.9 [ 14.278735] asus_wmi: SFUN value: 0x4a0877 [ 14.280217] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input18 [ 14.304701] asus_wmi: Number of fans: 1 [ 14.579076] usbcore: registered new interface driver btusb [ 14.601468] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0 [ 14.649750] usbcore: registered new interface driver ath3k [ 15.845578] cfg80211: World regulatory domain updated: [ 15.845589] cfg80211: DFS Master region: unset [ 15.845593] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 15.845600] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 15.845605] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 15.845609] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 15.845615] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 15.845621] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 15.845626] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 15.845631] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 15.845635] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 20.516327] device-mapper: uevent: version 1.0.3 [ 20.516457] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-de...@redhat.com [ 23.216735] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 25.169556] Adding 8388604k swap on /dev/mapper/sda7_crypt. Priority:-1 extents:1 across:8388604k FS [ 30.385311] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 30.385320] Bluetooth: BNEP filters: protocol multicast [ 30.385329] Bluetooth: BNEP socket layer initialized [ 37.080377] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 37.095314] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 37.126157] IPv6: ADDRCONF(NETDEV_UP): enp4s0f2: link is not ready [ 37.172269] r8169 0000:04:00.2: firmware: failed to load rtl_nic/rtl8411-1.fw (-2) [ 37.172279] r8169 0000:04:00.2: Direct firmware load for rtl_nic/rtl8411-1.fw failed with error -2 [ 37.172289] r8169 0000:04:00.2 enp4s0f2: unable to load firmware patch rtl_nic/rtl8411-1.fw (-2) [ 37.190604] r8169 0000:04:00.2 enp4s0f2: link down [ 37.190738] IPv6: ADDRCONF(NETDEV_UP): enp4s0f2: link is not ready [ 37.703884] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 38.193864] bbswitch: version 0.8 [ 38.193878] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0 [ 38.193888] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP [ 38.193915] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95) [ 38.194115] bbswitch: detected an Optimus _DSM function [ 38.194137] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on [ 38.197678] bbswitch: disabling discrete graphics [ 38.197700] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95) [ 38.765816] wlp3s0: authenticate with 9c:c7:a6:9a:9b:42 [ 38.780291] wlp3s0: send auth to 9c:c7:a6:9a:9b:42 (try 1/3) [ 38.783316] wlp3s0: authenticated [ 38.791554] wlp3s0: associate with 9c:c7:a6:9a:9b:42 (try 1/3) [ 38.802542] wlp3s0: RX AssocResp from 9c:c7:a6:9a:9b:42 (capab=0x431 status=0 aid=1) [ 38.802661] wlp3s0: associated [ 38.802730] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 38.807335] ath: EEPROM regdomain: 0x8114 [ 38.807340] ath: EEPROM indicates we should expect a country code [ 38.807342] ath: doing EEPROM country->regdmn map search [ 38.807344] ath: country maps to regdmn code: 0x37 [ 38.807346] ath: Country alpha2 being used: DE [ 38.807349] ath: Regpair used: 0x37 [ 38.807351] ath: regdomain 0x8114 dynamically updated by country IE [ 38.807373] cfg80211: Regulatory domain changed to country: DE [ 38.807374] cfg80211: DFS Master region: ETSI [ 38.807377] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 38.807381] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 38.807385] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 38.807417] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 38.807420] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [ 38.807423] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 797.284981] Bluetooth: RFCOMM TTY layer initialized [ 797.284992] Bluetooth: RFCOMM socket layer initialized [ 797.285001] Bluetooth: RFCOMM ver 1.11 [ 877.441920] usb 3-1.1: USB disconnect, device number 3 ** Model information sys_vendor: ASUSTeK COMPUTER INC. product_name: K56CB product_version: 1.0 chassis_vendor: ASUSTeK COMPUTER INC. chassis_version: 1.0 bios_vendor: American Megatrends Inc. bios_version: K56CB.204 board_vendor: ASUSTeK COMPUTER INC. board_name: K56CB board_version: 1.0 ** Loaded modules: cmac rfcomm ecb ctr ccm bbswitch(O) bnep binfmt_misc nls_utf8 nls_cp437 vfat fat drbg ansi_cprng xts gf128mul dm_crypt dm_mod ath3k btusb btrtl btbcm mxm_wmi btintel asus_nb_wmi iTCO_wdt asus_wmi bluetooth iTCO_vendor_support sparse_keymap arc4 snd_hda_codec_hdmi pcspkr intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp ath9k ath9k_common coretemp ath9k_hw crct10dif_pclmul crc32_pclmul cryptd ath joydev evdev efi_pstore snd_hda_codec_realtek snd_hda_codec_generic mac80211 efivars serio_raw i2c_i801 cfg80211 i915 rfkill snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep rtsx_pci_ms snd_pcm memstick sg snd_timer drm_kms_helper drm snd soundcore lpc_ich wmi i2c_algo_bit button ac mei_me battery video mei shpchp tpm_tis tpm processor ecryptfs cbc sha256_ssse3 sha256_generic hmac encrypted_keys parport_pc ppdev lp parport efivarfs autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid hid sr_mod sd_mod cdrom rtsx_pci_sdmmc mmc_core crc32c_intel ahci psmouse libahci libata scsi_mod r8169 mii rtsx_pci mfd_core ehci_pci ehci_hcd xhci_pci fjes xhci_hcd usbcore usb_common thermal ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: ASUSTeK Computer Inc. 2nd Generation Core Processor Family DRAM Controller [1043:1587] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 24 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f6000000-f70fffff Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0106] (rev 09) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. 2nd Generation Core Processor Family Integrated Graphics Controller [1043:2139] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 31 Region 0: Memory at f7400000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI]) Subsystem: ASUSTeK Computer Inc. 7 Series/C210 Series Chipset Family USB xHCI Host Controller [1043:1587] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 25 Region 0: Memory at f7a00000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) Subsystem: ASUSTeK Computer Inc. 7 Series/C210 Series Chipset Family MEI Controller [1043:1587] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 29 Region 0: Memory at f7a1a000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei_me Kernel modules: mei_me 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. 7 Series/C210 Series Chipset Family USB Enhanced Host Controller [1043:1587] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7a18000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) Subsystem: ASUSTeK Computer Inc. 7 Series/C210 Series Chipset Family High Definition Audio Controller [1043:1587] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 30 Region 0: Memory at f7a10000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: f7900000-f79fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 19 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f7800000-f78fffff Prefetchable memory behind bridge: 00000000f2100000-00000000f21fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. 7 Series/C210 Series Chipset Family USB Enhanced Host Controller [1043:1587] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f7a17000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04) Subsystem: ASUSTeK Computer Inc. HM76 Express Chipset LPC Controller [1043:1587] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [1043:1587] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 28 Region 0: I/O ports at f0b0 [size=8] Region 1: I/O ports at f0a0 [size=4] Region 2: I/O ports at f090 [size=8] Region 3: I/O ports at f080 [size=4] Region 4: I/O ports at f060 [size=32] Region 5: Memory at f7a16000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) Subsystem: ASUSTeK Computer Inc. 7 Series/C210 Series Chipset Family SMBus Controller [1043:1587] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 0 Region 0: Memory at f7a15000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at f040 [size=32] Kernel modules: i2c_i801 01:00.0 3D controller [0302]: NVIDIA Corporation GK107M [GeForce GT 740M] [10de:0fdf] (rev ff) (prog-if ff) !!! Unknown header type 7f Kernel modules: nvidia 03:00.0 Network controller [0280]: Qualcomm Atheros AR9485 Wireless Network Adapter [168c:0032] (rev 01) Subsystem: AzureWave AR9485 Wireless Network Adapter [1a3b:2c97] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at f7900000 (64-bit, non-prefetchable) [size=512K] Expansion ROM at f7980000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k Kernel modules: ath9k 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTL8411 PCI Express Card Reader [10ec:5289] (rev 01) Subsystem: ASUSTeK Computer Inc. RTL8411 PCI Express Card Reader [1043:1587] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 26 Region 0: Memory at f7800000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: rtsx_pci Kernel modules: rtsx_pci 04:00.2 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0a) Subsystem: ASUSTeK Computer Inc. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1043:1587] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 27 Region 0: I/O ports at d000 [size=256] Region 2: Memory at f2104000 (64-bit, prefetchable) [size=4K] Region 4: Memory at f2100000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 ** USB devices: Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 1bcf:0007 Sunplus Innovation Technology Inc. Optical Mouse Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: stretch/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.4.0-1-amd64 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.4.0-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.59 ii initramfs-tools [linux-initramfs-tool] 0.123 ii kmod 22-1 ii linux-base 4.0 Versions of packages linux-image-4.4.0-1-amd64 recommends: ii firmware-linux-free 3.4 ii irqbalance 1.1.0-2 Versions of packages linux-image-4.4.0-1-amd64 suggests: pn debian-kernel-handbook <none> pn grub-pc | grub-efi | extlinux <none> pn linux-doc-4.4 <none> Versions of packages linux-image-4.4.0-1-amd64 is related to: ii firmware-atheros 20160110-1 pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-4.4.0-1-amd64/prerm/removing-running-kernel-4.4.0-1-amd64: true
